From: Thomas Zimmermann <tzimmermann@suse.de>
To: airlied@redhat.com, daniel@ffwll.ch, kraxel@redhat.com,
noralf@tronnes.org, sam@ravnborg.org, john.p.donnelly@oracle.com
Cc: Thomas Zimmermann <tzimmermann@suse.de>, dri-devel@lists.freedesktop.org
Subject: [PATCH 08/17] drm/mgag200: Split MISC register update into PLL selection, SYNC and I/O
Date: Wed, 29 Apr 2020 16:32:29 +0200 [thread overview]
Message-ID: <20200429143238.10115-9-tzimmermann@suse.de> (raw)
In-Reply-To: <20200429143238.10115-1-tzimmermann@suse.de>
Set different fields in MISC in their rsp location in the code. This
patch also fixes a bug in the original code where the mode's SYNC flags
were never written into the MISC register.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
---
drivers/gpu/drm/mgag200/mgag200_mode.c | 37 ++++++++++++++++++--------
drivers/gpu/drm/mgag200/mgag200_reg.h | 5 +++-
2 files changed, 30 insertions(+), 12 deletions(-)
diff --git a/drivers/gpu/drm/mgag200/mgag200_mode.c b/drivers/gpu/drm/mgag200/mgag200_mode.c
index 749ba6e420ac7..b5bb02e9f05d6 100644
--- a/drivers/gpu/drm/mgag200/mgag200_mode.c
+++ b/drivers/gpu/drm/mgag200/mgag200_mode.c
@@ -704,6 +704,8 @@ static int mga_g200er_set_plls(struct mga_device *mdev, long clock)
static int mga_crtc_set_plls(struct mga_device *mdev, long clock)
{
+ uint8_t misc;
+
switch(mdev->type) {
case G200_SE_A:
case G200_SE_B:
@@ -724,6 +726,12 @@ static int mga_crtc_set_plls(struct mga_device *mdev, long clock)
return mga_g200er_set_plls(mdev, clock);
break;
}
+
+ misc = RREG8(MGA_MISC_IN);
+ misc &= ~GENMASK(3, 2);
+ misc |= MGAREG_MISC_CLK_SEL_MGA_MSK;
+ WREG8(MGA_MISC_OUT, misc);
+
return 0;
}
@@ -916,7 +924,7 @@ static void mgag200_set_mode_regs(struct mga_device *mdev,
{
unsigned int hdisplay, hsyncstart, hsyncend, htotal;
unsigned int vdisplay, vsyncstart, vsyncend, vtotal;
- uint8_t misc = 0;
+ uint8_t misc;
uint8_t crtcext1, crtcext2, crtcext5;
hdisplay = mode->hdisplay / 8 - 1;
@@ -933,10 +941,17 @@ static void mgag200_set_mode_regs(struct mga_device *mdev,
vsyncend = mode->vsync_end - 1;
vtotal = mode->vtotal - 2;
+ misc = RREG8(MGA_MISC_IN);
+
if (mode->flags & DRM_MODE_FLAG_NHSYNC)
- misc |= 0x40;
+ misc |= MGAREG_MISC_HSYNCPOL;
+ else
+ misc &= ~MGAREG_MISC_HSYNCPOL;
+
if (mode->flags & DRM_MODE_FLAG_NVSYNC)
- misc |= 0x80;
+ misc |= MGAREG_MISC_VSYNCPOL;
+ else
+ misc &= ~MGAREG_MISC_VSYNCPOL;
crtcext1 = (((htotal - 4) & 0x100) >> 8) |
((hdisplay & 0x100) >> 7) |
@@ -982,6 +997,10 @@ static void mgag200_set_mode_regs(struct mga_device *mdev,
WREG_ECRT(0x01, crtcext1);
WREG_ECRT(0x02, crtcext2);
WREG_ECRT(0x05, crtcext5);
+
+ WREG8(MGA_MISC_OUT, misc);
+
+ mga_crtc_set_plls(mdev, mode->clock);
}
static int mga_crtc_mode_set(struct drm_crtc *crtc,
@@ -1140,12 +1159,6 @@ static int mga_crtc_mode_set(struct drm_crtc *crtc,
ext_vga[3] = ((1 << bppshift) - 1) | 0x80;
ext_vga[4] = 0;
- /* Set pixel clocks */
- misc = 0x2d;
- WREG8(MGA_MISC_OUT, misc);
-
- mga_crtc_set_plls(mdev, mode->clock);
-
WREG_ECRT(0, ext_vga[0]);
WREG_ECRT(3, ext_vga[3]);
WREG_ECRT(4, ext_vga[4]);
@@ -1161,9 +1174,11 @@ static int mga_crtc_mode_set(struct drm_crtc *crtc,
}
WREG_ECRT(0, ext_vga[0]);
- /* Enable mga pixel clock */
- misc = 0x2d;
+ misc = RREG8(MGA_MISC_IN);
+ misc |= MGAREG_MISC_IOADSEL |
+ MGAREG_MISC_RAMMAPEN |
+ MGAREG_MISC_HIGH_PG_SEL;
WREG8(MGA_MISC_OUT, misc);
mga_crtc_do_set_base(mdev, fb, old_fb);
diff --git a/drivers/gpu/drm/mgag200/mgag200_reg.h b/drivers/gpu/drm/mgag200/mgag200_reg.h
index c096a9d6bcbc1..89e12c55153cf 100644
--- a/drivers/gpu/drm/mgag200/mgag200_reg.h
+++ b/drivers/gpu/drm/mgag200/mgag200_reg.h
@@ -16,10 +16,11 @@
* MGA1064SG Mystique register file
*/
-
#ifndef _MGA_REG_H_
#define _MGA_REG_H_
+#include <linux/bits.h>
+
#define MGAREG_DWGCTL 0x1c00
#define MGAREG_MACCESS 0x1c04
/* the following is a mystique only register */
@@ -227,6 +228,8 @@
#define MGAREG_MISC_CLK_SEL_MGA_MSK (0x3 << 2)
#define MGAREG_MISC_VIDEO_DIS (0x1 << 4)
#define MGAREG_MISC_HIGH_PG_SEL (0x1 << 5)
+#define MGAREG_MISC_HSYNCPOL BIT(6)
+#define MGAREG_MISC_VSYNCPOL BIT(7)
/* MMIO VGA registers */
#define MGAREG_SEQ_INDEX 0x1fc4
--
2.26.0
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
next prev parent reply other threads:[~2020-04-29 14:33 UTC|newest]
Thread overview: 55+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-04-29 14:32 [PATCH 00/17] drm/mgag200: Convert to atomic modesetting Thomas Zimmermann
2020-04-29 14:32 ` [PATCH 01/17] drm/mgag200: Remove HW cursor Thomas Zimmermann
2020-04-29 17:51 ` Sam Ravnborg
2020-04-30 7:03 ` Gerd Hoffmann
2020-04-30 8:10 ` Thomas Zimmermann
2020-04-30 9:19 ` Sam Ravnborg
2020-04-29 14:32 ` [PATCH 02/17] drm/mgag200: Remove unused fields from struct mga_device Thomas Zimmermann
2020-04-29 17:49 ` Sam Ravnborg
2020-04-29 14:32 ` [PATCH 03/17] drm/mgag200: Embed connector instance in " Thomas Zimmermann
2020-04-29 15:24 ` Ruhl, Michael J
2020-04-29 17:49 ` Sam Ravnborg
2020-04-29 14:32 ` [PATCH 04/17] drm/mgag200: Use managed mode-config initialization Thomas Zimmermann
2020-04-29 17:55 ` Sam Ravnborg
2020-04-29 14:32 ` [PATCH 05/17] drm/mgag200: Clean up mga_set_start_address() Thomas Zimmermann
2020-04-29 18:20 ` Sam Ravnborg
2020-04-30 8:23 ` Thomas Zimmermann
2020-05-11 12:41 ` Thomas Zimmermann
2020-04-29 14:32 ` [PATCH 06/17] drm/mgag200: Clean up mga_crtc_do_set_base() Thomas Zimmermann
2020-04-29 18:23 ` Sam Ravnborg
2020-04-29 14:32 ` [PATCH 07/17] drm/mgag200: Move mode-setting code into separate helper function Thomas Zimmermann
2020-04-29 18:24 ` Sam Ravnborg
2020-04-30 8:27 ` Thomas Zimmermann
2020-04-29 14:32 ` Thomas Zimmermann [this message]
2020-05-03 15:34 ` [PATCH 08/17] drm/mgag200: Split MISC register update into PLL selection, SYNC and I/O Sam Ravnborg
2020-05-04 13:03 ` Thomas Zimmermann
2020-05-04 14:25 ` Sam Ravnborg
2020-04-29 14:32 ` [PATCH 09/17] drm/mgag200: Update mode registers after plane registers Thomas Zimmermann
2020-05-03 15:34 ` Sam Ravnborg
2020-04-29 14:32 ` [PATCH 10/17] drm/mgag200: Set pitch in a separate helper function Thomas Zimmermann
2020-05-03 15:42 ` Sam Ravnborg
2020-05-04 13:10 ` Thomas Zimmermann
2020-04-29 14:32 ` [PATCH 11/17] drm/mgag200: Set primary plane's format in " Thomas Zimmermann
2020-04-29 14:32 ` [PATCH 12/17] drm/mgag200: Move TAGFIFO reset into separate function Thomas Zimmermann
2020-05-03 16:25 ` Sam Ravnborg
2020-05-04 13:11 ` Thomas Zimmermann
2020-05-04 14:29 ` Sam Ravnborg
2020-04-29 14:32 ` [PATCH 13/17] drm/mgag200: Move hiprilvl setting into separate functions Thomas Zimmermann
2020-05-03 17:23 ` Sam Ravnborg
2020-04-29 14:32 ` [PATCH 14/17] drm/mgag200: Move register initialization into separate function Thomas Zimmermann
2020-05-03 17:25 ` Sam Ravnborg
2020-04-29 14:32 ` [PATCH 15/17] drm/mgag200: Remove waiting from DPMS code Thomas Zimmermann
2020-05-04 12:10 ` Daniel Vetter
2020-05-04 12:40 ` Thomas Zimmermann
2020-04-29 14:32 ` [PATCH 16/17] drm/mgag200: Convert to simple KMS helper Thomas Zimmermann
2020-05-03 17:36 ` Sam Ravnborg
2020-04-29 14:32 ` [PATCH 17/17] drm/mgag200: Replace VRAM helpers with SHMEM helpers Thomas Zimmermann
2020-05-04 12:29 ` Emil Velikov
2020-05-04 12:45 ` Thomas Zimmermann
2020-04-30 0:11 ` [PATCH 00/17] drm/mgag200: Convert to atomic modesetting John Donnelly
2020-04-30 8:29 ` Thomas Zimmermann
2020-04-30 12:09 ` John Donnelly
2020-05-04 13:39 ` Thomas Zimmermann
2020-05-04 20:39 ` John Donnelly
2020-05-05 12:20 ` John Donnelly
2020-05-06 7:29 ` Thomas Zimmermann
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200429143238.10115-9-tzimmermann@suse.de \
--to=tzimmermann@suse.de \
--cc=airlied@redhat.com \
--cc=daniel@ffwll.ch \
--cc=dri-devel@lists.freedesktop.org \
--cc=john.p.donnelly@oracle.com \
--cc=kraxel@redhat.com \
--cc=noralf@tronnes.org \
--cc=sam@ravnborg.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox