From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
To: Biju Das <biju.das.jz@bp.renesas.com>
Cc: "Neil Armstrong" <neil.armstrong@linaro.org>,
"Robert Foss" <rfoss@kernel.org>,
"Andrzej Hajda" <andrzej.hajda@intel.com>,
"Geert Uytterhoeven" <geert+renesas@glider.be>,
"Jonas Karlman" <jonas@kwiboo.se>,
"Adam Ford" <aford173@gmail.com>,
dri-devel@lists.freedesktop.org,
"Abhinav Kumar" <quic_abhinavk@quicinc.com>,
"Jernej Skrabec" <jernej.skrabec@gmail.com>,
"Javier Martinez Canillas" <javierm@redhat.com>,
linux-renesas-soc@vger.kernel.org,
"Andy Shevchenko" <andy.shevchenko@gmail.com>,
"Bogdan Togorean" <bogdan.togorean@analog.com>,
"Uwe Kleine-König" <u.kleine-koenig@pengutronix.de>,
"Ahmad Fatoum" <a.fatoum@pengutronix.de>
Subject: Re: [PATCH 2/7] drm: adv7511: Add max_mode_clock variable to struct adv7511_chip_info
Date: Tue, 29 Aug 2023 10:23:33 +0300 [thread overview]
Message-ID: <20230829072333.GL17083@pendragon.ideasonboard.com> (raw)
In-Reply-To: <20230813180512.307418-3-biju.das.jz@bp.renesas.com>
Hi Biju,
Thank you for the patch.
On Sun, Aug 13, 2023 at 07:05:07PM +0100, Biju Das wrote:
> The ADV7533 supports a maximum pixel clock of 80MHz whereas it is 148.5MHz
> for ADV7535. Add max_mode_clock variable to struct adv7511_chip_info to
> handle this difference.
>
> Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
> ---
> drivers/gpu/drm/bridge/adv7511/adv7511.h | 1 +
> drivers/gpu/drm/bridge/adv7511/adv7511_drv.c | 6 ++++--
> drivers/gpu/drm/bridge/adv7511/adv7533.c | 2 +-
> 3 files changed, 6 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/gpu/drm/bridge/adv7511/adv7511.h b/drivers/gpu/drm/bridge/adv7511/adv7511.h
> index 59e8ef10d72e..f8190442ffca 100644
> --- a/drivers/gpu/drm/bridge/adv7511/adv7511.h
> +++ b/drivers/gpu/drm/bridge/adv7511/adv7511.h
> @@ -335,6 +335,7 @@ enum adv7511_type {
>
> struct adv7511_chip_info {
> enum adv7511_type type;
> + unsigned long max_mode_clock;
unsigned int is enough as the clock is expressed in kHz. To make it
extra clear, you could also name the field max_mode_clock_khz.
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
> };
>
> struct adv7511 {
> diff --git a/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c b/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c
> index 013d8d640ef4..193b2d5bc7e6 100644
> --- a/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c
> +++ b/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c
> @@ -1371,11 +1371,13 @@ static const struct adv7511_chip_info adv7511_chip_info = {
> };
>
> static const struct adv7511_chip_info adv7533_chip_info = {
> - .type = ADV7533
> + .type = ADV7533,
> + .max_mode_clock = 80000
> };
>
> static const struct adv7511_chip_info adv7535_chip_info = {
> - .type = ADV7535
> + .type = ADV7535,
> + .max_mode_clock = 148500
> };
>
> static const struct i2c_device_id adv7511_i2c_ids[] = {
> diff --git a/drivers/gpu/drm/bridge/adv7511/adv7533.c b/drivers/gpu/drm/bridge/adv7511/adv7533.c
> index c452c4dc1c3f..e92b27e0afd1 100644
> --- a/drivers/gpu/drm/bridge/adv7511/adv7533.c
> +++ b/drivers/gpu/drm/bridge/adv7511/adv7533.c
> @@ -108,7 +108,7 @@ enum drm_mode_status adv7533_mode_valid(struct adv7511 *adv,
> u8 bpp = mipi_dsi_pixel_format_to_bpp(dsi->format);
>
> /* Check max clock for either 7533 or 7535 */
> - if (mode->clock > (adv->info->type == ADV7533 ? 80000 : 148500))
> + if (mode->clock > adv->info->max_mode_clock)
> return MODE_CLOCK_HIGH;
>
> /* Check max clock for each lane */
--
Regards,
Laurent Pinchart
next prev parent reply other threads:[~2023-08-29 7:23 UTC|newest]
Thread overview: 32+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-08-13 18:05 [PATCH 0/7] ADV7511 driver enhancements Biju Das
2023-08-13 18:05 ` [PATCH 1/7] drm: adv7511: Add struct adv7511_chip_info and use i2c_get_match_data() Biju Das
2023-08-18 14:49 ` Adam Ford
2023-08-29 7:22 ` Laurent Pinchart
2023-08-29 14:00 ` Biju Das
2023-08-13 18:05 ` [PATCH 2/7] drm: adv7511: Add max_mode_clock variable to struct adv7511_chip_info Biju Das
2023-08-28 22:36 ` Adam Ford
2023-08-29 7:23 ` Laurent Pinchart [this message]
2023-08-29 14:01 ` Biju Das
2023-08-13 18:05 ` [PATCH 3/7] drm: adv7511: Add max_lane_freq " Biju Das
2023-08-29 7:25 ` Laurent Pinchart
2023-08-29 14:05 ` Biju Das
2023-08-13 18:05 ` [PATCH 4/7] drm: adv7511: Add supply_names and num_supplies variables " Biju Das
2023-08-29 7:26 ` Laurent Pinchart
2023-08-29 14:06 ` Biju Das
2023-08-13 18:05 ` [PATCH 5/7] drm: adv7511: Add has_dsi feature bit " Biju Das
2023-08-29 7:30 ` Laurent Pinchart
2023-08-29 14:19 ` Biju Das
2023-08-29 15:35 ` Laurent Pinchart
2023-08-29 15:42 ` Biju Das
2023-08-30 8:22 ` Laurent Pinchart
2023-08-13 18:05 ` [PATCH 6/7] drm: adv7511: Add link_config " Biju Das
2023-08-29 7:34 ` Laurent Pinchart
2023-08-29 14:20 ` Biju Das
2023-08-13 18:05 ` [PATCH 7/7] drm: adv7511: Add hpd_override_enable " Biju Das
2023-08-18 12:41 ` Adam Ford
2023-08-18 13:34 ` Biju Das
2023-08-18 13:37 ` Adam Ford
2023-08-18 13:44 ` Biju Das
2023-08-29 7:36 ` Laurent Pinchart
2023-08-29 14:22 ` Biju Das
2023-08-18 13:56 ` [PATCH 0/7] ADV7511 driver enhancements Fabio Estevam
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230829072333.GL17083@pendragon.ideasonboard.com \
--to=laurent.pinchart@ideasonboard.com \
--cc=a.fatoum@pengutronix.de \
--cc=aford173@gmail.com \
--cc=andrzej.hajda@intel.com \
--cc=andy.shevchenko@gmail.com \
--cc=biju.das.jz@bp.renesas.com \
--cc=bogdan.togorean@analog.com \
--cc=dri-devel@lists.freedesktop.org \
--cc=geert+renesas@glider.be \
--cc=javierm@redhat.com \
--cc=jernej.skrabec@gmail.com \
--cc=jonas@kwiboo.se \
--cc=linux-renesas-soc@vger.kernel.org \
--cc=neil.armstrong@linaro.org \
--cc=quic_abhinavk@quicinc.com \
--cc=rfoss@kernel.org \
--cc=u.kleine-koenig@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox