From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
To: Biju Das <biju.das.jz@bp.renesas.com>
Cc: "Neil Armstrong" <neil.armstrong@linaro.org>,
"Robert Foss" <rfoss@kernel.org>,
"Andrzej Hajda" <andrzej.hajda@intel.com>,
"Geert Uytterhoeven" <geert+renesas@glider.be>,
"Jonas Karlman" <jonas@kwiboo.se>,
"Adam Ford" <aford173@gmail.com>,
dri-devel@lists.freedesktop.org,
"Abhinav Kumar" <quic_abhinavk@quicinc.com>,
"Jernej Skrabec" <jernej.skrabec@gmail.com>,
"Javier Martinez Canillas" <javierm@redhat.com>,
linux-renesas-soc@vger.kernel.org,
"Andy Shevchenko" <andy.shevchenko@gmail.com>,
"Bogdan Togorean" <bogdan.togorean@analog.com>,
"Uwe Kleine-König" <u.kleine-koenig@pengutronix.de>,
"Ahmad Fatoum" <a.fatoum@pengutronix.de>
Subject: Re: [PATCH 5/7] drm: adv7511: Add has_dsi feature bit to struct adv7511_chip_info
Date: Tue, 29 Aug 2023 10:30:31 +0300 [thread overview]
Message-ID: <20230829073031.GA2302@pendragon.ideasonboard.com> (raw)
In-Reply-To: <20230813180512.307418-6-biju.das.jz@bp.renesas.com>
Hi Biju,
Thank you for the patch.
On Sun, Aug 13, 2023 at 07:05:10PM +0100, Biju Das wrote:
> The ADV7533 and ADV7535 have DSI support. Add a feature bit has_dsi to
> struct adv7511_chip_info for handling configuration related to DSI.
>
> Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
> ---
> drivers/gpu/drm/bridge/adv7511/adv7511.h | 1 +
> drivers/gpu/drm/bridge/adv7511/adv7511_drv.c | 20 +++++++++++---------
> 2 files changed, 12 insertions(+), 9 deletions(-)
>
> diff --git a/drivers/gpu/drm/bridge/adv7511/adv7511.h b/drivers/gpu/drm/bridge/adv7511/adv7511.h
> index b29d11cae932..2a017bb31a14 100644
> --- a/drivers/gpu/drm/bridge/adv7511/adv7511.h
> +++ b/drivers/gpu/drm/bridge/adv7511/adv7511.h
> @@ -339,6 +339,7 @@ struct adv7511_chip_info {
> unsigned long max_lane_freq;
> const char * const *supply_names;
> unsigned int num_supplies;
> + unsigned has_dsi:1;
As you're not short of space here, I'd make this a bool.
> };
>
> struct adv7511 {
> diff --git a/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c b/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c
> index f6f15c1b0882..66b3f8fcf67d 100644
> --- a/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c
> +++ b/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c
> @@ -373,7 +373,7 @@ static void adv7511_power_on(struct adv7511 *adv7511)
> */
> regcache_sync(adv7511->regmap);
>
> - if (adv7511->info->type == ADV7533 || adv7511->info->type == ADV7535)
> + if (adv7511->info->has_dsi)
> adv7533_dsi_power_on(adv7511);
> adv7511->powered = true;
> }
> @@ -397,7 +397,7 @@ static void __adv7511_power_off(struct adv7511 *adv7511)
> static void adv7511_power_off(struct adv7511 *adv7511)
> {
> __adv7511_power_off(adv7511);
> - if (adv7511->info->type == ADV7533 || adv7511->info->type == ADV7535)
> + if (adv7511->info->has_dsi)
> adv7533_dsi_power_off(adv7511);
> adv7511->powered = false;
> }
> @@ -786,7 +786,7 @@ static void adv7511_mode_set(struct adv7511 *adv7511,
> else
> low_refresh_rate = ADV7511_LOW_REFRESH_RATE_NONE;
>
> - if (adv7511->info->type == ADV7511)
> + if (!adv7511->info->has_dsi)
While this is functionally equivalent, is the register below really
related to DSI ? If not, I'd rather not check the has_dsi field here but
keep checking the type.
> regmap_update_bits(adv7511->regmap, 0xfb,
> 0x6, low_refresh_rate << 1);
> else
> @@ -921,7 +921,7 @@ static enum drm_mode_status adv7511_bridge_mode_valid(struct drm_bridge *bridge,
> {
> struct adv7511 *adv = bridge_to_adv7511(bridge);
>
> - if (adv->info->type == ADV7533 || adv->info->type == ADV7535)
> + if (adv->info->has_dsi)
> return adv7533_mode_valid(adv, mode);
> else
> return adv7511_mode_valid(adv, mode);
> @@ -1086,7 +1086,7 @@ static int adv7511_init_cec_regmap(struct adv7511 *adv)
> goto err;
> }
>
> - if (adv->info->type == ADV7533 || adv->info->type == ADV7535) {
> + if (adv->info->has_dsi) {
Same comment here, this doesn't seem logically right.
> ret = adv7533_patch_cec_registers(adv);
> if (ret)
> goto err;
> @@ -1245,7 +1245,7 @@ static int adv7511_probe(struct i2c_client *i2c)
> goto uninit_regulators;
> dev_dbg(dev, "Rev. %d\n", val);
>
> - if (info->type == ADV7511)
> + if (!info->has_dsi)
And here too.
> ret = regmap_register_patch(adv7511->regmap,
> adv7511_fixed_registers,
> ARRAY_SIZE(adv7511_fixed_registers));
> @@ -1316,7 +1316,7 @@ static int adv7511_probe(struct i2c_client *i2c)
>
> adv7511_audio_init(dev, adv7511);
>
> - if (info->type == ADV7533 || info->type == ADV7535) {
> + if (info->has_dsi) {
> ret = adv7533_attach_dsi(adv7511);
> if (ret)
> goto err_unregister_audio;
> @@ -1370,7 +1370,8 @@ static const struct adv7511_chip_info adv7533_chip_info = {
> .max_mode_clock = 80000,
> .max_lane_freq = 800000,
> .supply_names = adv7533_supply_names,
> - .num_supplies = ARRAY_SIZE(adv7533_supply_names)
> + .num_supplies = ARRAY_SIZE(adv7533_supply_names),
> + .has_dsi = 1
> };
>
> static const struct adv7511_chip_info adv7535_chip_info = {
> @@ -1378,7 +1379,8 @@ static const struct adv7511_chip_info adv7535_chip_info = {
> .max_mode_clock = 148500,
> .max_lane_freq = 891000,
> .supply_names = adv7533_supply_names,
> - .num_supplies = ARRAY_SIZE(adv7533_supply_names)
> + .num_supplies = ARRAY_SIZE(adv7533_supply_names),
> + .has_dsi = 1
> };
>
> static const struct i2c_device_id adv7511_i2c_ids[] = {
--
Regards,
Laurent Pinchart
next prev parent reply other threads:[~2023-08-29 7:30 UTC|newest]
Thread overview: 32+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-08-13 18:05 [PATCH 0/7] ADV7511 driver enhancements Biju Das
2023-08-13 18:05 ` [PATCH 1/7] drm: adv7511: Add struct adv7511_chip_info and use i2c_get_match_data() Biju Das
2023-08-18 14:49 ` Adam Ford
2023-08-29 7:22 ` Laurent Pinchart
2023-08-29 14:00 ` Biju Das
2023-08-13 18:05 ` [PATCH 2/7] drm: adv7511: Add max_mode_clock variable to struct adv7511_chip_info Biju Das
2023-08-28 22:36 ` Adam Ford
2023-08-29 7:23 ` Laurent Pinchart
2023-08-29 14:01 ` Biju Das
2023-08-13 18:05 ` [PATCH 3/7] drm: adv7511: Add max_lane_freq " Biju Das
2023-08-29 7:25 ` Laurent Pinchart
2023-08-29 14:05 ` Biju Das
2023-08-13 18:05 ` [PATCH 4/7] drm: adv7511: Add supply_names and num_supplies variables " Biju Das
2023-08-29 7:26 ` Laurent Pinchart
2023-08-29 14:06 ` Biju Das
2023-08-13 18:05 ` [PATCH 5/7] drm: adv7511: Add has_dsi feature bit " Biju Das
2023-08-29 7:30 ` Laurent Pinchart [this message]
2023-08-29 14:19 ` Biju Das
2023-08-29 15:35 ` Laurent Pinchart
2023-08-29 15:42 ` Biju Das
2023-08-30 8:22 ` Laurent Pinchart
2023-08-13 18:05 ` [PATCH 6/7] drm: adv7511: Add link_config " Biju Das
2023-08-29 7:34 ` Laurent Pinchart
2023-08-29 14:20 ` Biju Das
2023-08-13 18:05 ` [PATCH 7/7] drm: adv7511: Add hpd_override_enable " Biju Das
2023-08-18 12:41 ` Adam Ford
2023-08-18 13:34 ` Biju Das
2023-08-18 13:37 ` Adam Ford
2023-08-18 13:44 ` Biju Das
2023-08-29 7:36 ` Laurent Pinchart
2023-08-29 14:22 ` Biju Das
2023-08-18 13:56 ` [PATCH 0/7] ADV7511 driver enhancements Fabio Estevam
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230829073031.GA2302@pendragon.ideasonboard.com \
--to=laurent.pinchart@ideasonboard.com \
--cc=a.fatoum@pengutronix.de \
--cc=aford173@gmail.com \
--cc=andrzej.hajda@intel.com \
--cc=andy.shevchenko@gmail.com \
--cc=biju.das.jz@bp.renesas.com \
--cc=bogdan.togorean@analog.com \
--cc=dri-devel@lists.freedesktop.org \
--cc=geert+renesas@glider.be \
--cc=javierm@redhat.com \
--cc=jernej.skrabec@gmail.com \
--cc=jonas@kwiboo.se \
--cc=linux-renesas-soc@vger.kernel.org \
--cc=neil.armstrong@linaro.org \
--cc=quic_abhinavk@quicinc.com \
--cc=rfoss@kernel.org \
--cc=u.kleine-koenig@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox