From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
To: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Jyri Sarha <jsarha@ti.com>, dri-devel@lists.freedesktop.org
Subject: Re: [PATCH 1/6 v2] drm/omap: add new connector types
Date: Wed, 10 May 2017 01:35:56 +0300 [thread overview]
Message-ID: <3422279.XeqUQ1Vfv1@avalon> (raw)
In-Reply-To: <1494314187-12816-1-git-send-email-tomi.valkeinen@ti.com>
Hi Tomi,
Thank you for the patch.
On Tuesday 09 May 2017 10:16:27 Tomi Valkeinen wrote:
> We have been using DRM_MODE_CONNECTOR_Unknown for many of our outputs
> because there has not been a proper connector type for them.
>
> We now have connector type for DPI so let's take it into use. At the
> same time, add better connector types for the remaining outputs too.
>
> This patch sets the following outputs to use the following connector
> types:
>
> DPI -> DPI
> DBI -> DPI (MIPI DBI is very similar to DPI at the bus level)
> SDI -> LVDS (SDI, TI Flatlink 3G, is a type of LVDS)
> VENC -> SVIDEO (it could also be composite, but we don't have that
> information here, so svideo should be quite good match)
>
> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
> ---
> drivers/gpu/drm/omapdrm/omap_drv.c | 13 +++++++++++++
> 1 file changed, 13 insertions(+)
>
> diff --git a/drivers/gpu/drm/omapdrm/omap_drv.c
> b/drivers/gpu/drm/omapdrm/omap_drv.c index e1f47f0b3ccf..16c537837742
> 100644
> --- a/drivers/gpu/drm/omapdrm/omap_drv.c
> +++ b/drivers/gpu/drm/omapdrm/omap_drv.c
> @@ -214,6 +214,19 @@ static int get_connector_type(struct omap_dss_device
> *dssdev) return DRM_MODE_CONNECTOR_DVID;
> case OMAP_DISPLAY_TYPE_DSI:
> return DRM_MODE_CONNECTOR_DSI;
> + case OMAP_DISPLAY_TYPE_DPI:
> + case OMAP_DISPLAY_TYPE_DBI:
> + return DRM_MODE_CONNECTOR_DPI;
> + case OMAP_DISPLAY_TYPE_VENC:
> + if (of_device_is_compatible(dssdev->dev->of_node,
> + "omapdss,svideo-connector"))
> + return DRM_MODE_CONNECTOR_SVIDEO;
> + if (of_device_is_compatible(dssdev->dev->of_node,
> + "omapdss,composite-video-connector"))
> + return DRM_MODE_CONNECTOR_Composite;
Checking the compat string here feels like a bit of a hack to me. Wouldn't it
be simpler and cleaner to add the connector type to the omap_dss_device
structure ? That's more work though, so as a first step I think I could
tolerate this hack if you really feel lazy ;-) Although, maybe we should just
return SVIDEO unconditionally for VENC for now and fix that later.
> + return DRM_MODE_CONNECTOR_Unknown;
> + case OMAP_DISPLAY_TYPE_SDI:
> + return DRM_MODE_CONNECTOR_LVDS;
> default:
> return DRM_MODE_CONNECTOR_Unknown;
> }
--
Regards,
Laurent Pinchart
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
next prev parent reply other threads:[~2017-05-09 22:35 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-04-27 10:27 [PATCH 0/6] drm/omap: misc changes Tomi Valkeinen
2017-04-27 10:27 ` [PATCH 1/6] drm/omap: add new connector types Tomi Valkeinen
2017-05-08 14:21 ` Laurent Pinchart
2017-05-08 14:35 ` Tomi Valkeinen
2017-05-08 16:21 ` Laurent Pinchart
2017-05-09 6:57 ` Tomi Valkeinen
2017-05-09 7:16 ` [PATCH 1/6 v2] " Tomi Valkeinen
2017-05-09 7:36 ` Jyri Sarha
2017-05-09 7:41 ` Tomi Valkeinen
2017-05-09 22:35 ` Laurent Pinchart [this message]
2017-05-10 6:59 ` Tomi Valkeinen
2017-04-27 10:27 ` [PATCH 2/6] drm/omap: remove unused ovl_enabled() Tomi Valkeinen
2017-05-08 14:23 ` Laurent Pinchart
2017-04-27 10:27 ` [PATCH 3/6] drm/omap: remove ovl_set_channel_out Tomi Valkeinen
2017-05-08 14:26 ` Laurent Pinchart
2017-05-09 7:12 ` Tomi Valkeinen
2017-04-27 10:27 ` [PATCH 4/6] drm/omap: remove read_irqenable() Tomi Valkeinen
2017-05-08 14:28 ` Laurent Pinchart
2017-04-27 10:27 ` [PATCH 5/6] drm/omap: 64bit compile fixes Tomi Valkeinen
2017-05-08 14:29 ` Laurent Pinchart
2017-04-27 10:27 ` [PATCH 6/6] drm/omap: define compat_ioctl Tomi Valkeinen
2017-05-08 14:32 ` Laurent Pinchart
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=3422279.XeqUQ1Vfv1@avalon \
--to=laurent.pinchart@ideasonboard.com \
--cc=dri-devel@lists.freedesktop.org \
--cc=jsarha@ti.com \
--cc=tomi.valkeinen@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox