From: "Nautiyal, Ankit K" <ankit.k.nautiyal@intel.com>
To: "Jouni Högander" <jouni.hogander@intel.com>,
intel-gfx@lists.freedesktop.org, intel-xe@lists.freedesktop.org,
dri-devel@lists.freedesktop.org
Subject: Re: [PATCH v2 08/12] drm/i915/alpm: Move port alpm configuration
Date: Wed, 21 May 2025 10:23:44 +0530 [thread overview]
Message-ID: <6038d503-07ea-4085-973d-77224d45937d@intel.com> (raw)
In-Reply-To: <20250520165326.1631330-9-jouni.hogander@intel.com>
On 5/20/2025 10:23 PM, Jouni Högander wrote:
> It is specified in Bspec where port alpm configuration is supposed to be
> performed. Change accordingly.
>
> v2:
> - drop HAS reference
> - ensure PORT_ALPM registers are not writen on older platform
>
> Bspec: 68849
> Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
> ---
> drivers/gpu/drm/i915/display/intel_alpm.c | 48 ++++++++++++--------
> drivers/gpu/drm/i915/display/intel_alpm.h | 2 +
> drivers/gpu/drm/i915/display/intel_cx0_phy.c | 1 +
> drivers/gpu/drm/i915/display/intel_ddi.c | 6 +++
> 4 files changed, 39 insertions(+), 18 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/display/intel_alpm.c b/drivers/gpu/drm/i915/display/intel_alpm.c
> index bbcf510b0c25..dfdde8e4eabe 100644
> --- a/drivers/gpu/drm/i915/display/intel_alpm.c
> +++ b/drivers/gpu/drm/i915/display/intel_alpm.c
> @@ -336,7 +336,6 @@ static void lnl_alpm_configure(struct intel_dp *intel_dp,
> {
> struct intel_display *display = to_intel_display(intel_dp);
> enum transcoder cpu_transcoder = crtc_state->cpu_transcoder;
> - enum port port = dp_to_dig_port(intel_dp)->base.port;
> u32 alpm_ctl;
>
> if (DISPLAY_VER(display) < 20 || (!intel_psr_needs_alpm(intel_dp, crtc_state) &&
> @@ -368,23 +367,6 @@ static void lnl_alpm_configure(struct intel_dp *intel_dp,
> pr_alpm_ctl);
> }
>
> - intel_de_write(display,
> - PORT_ALPM_CTL(port),
> - PORT_ALPM_CTL_ALPM_AUX_LESS_ENABLE |
> - PORT_ALPM_CTL_MAX_PHY_SWING_SETUP(15) |
> - PORT_ALPM_CTL_MAX_PHY_SWING_HOLD(0) |
> - PORT_ALPM_CTL_SILENCE_PERIOD(
> - intel_dp->alpm_parameters.silence_period_sym_clocks));
> -
> - intel_de_write(display,
> - PORT_ALPM_LFPS_CTL(port),
> - PORT_ALPM_LFPS_CTL_LFPS_CYCLE_COUNT(10) |
> - PORT_ALPM_LFPS_CTL_LFPS_HALF_CYCLE_DURATION(
> - intel_dp->alpm_parameters.lfps_half_cycle_num_of_syms) |
> - PORT_ALPM_LFPS_CTL_FIRST_LFPS_HALF_CYCLE_DURATION(
> - intel_dp->alpm_parameters.lfps_half_cycle_num_of_syms) |
> - PORT_ALPM_LFPS_CTL_LAST_LFPS_HALF_CYCLE_DURATION(
> - intel_dp->alpm_parameters.lfps_half_cycle_num_of_syms));
> } else {
> alpm_ctl = ALPM_CTL_EXTENDED_FAST_WAKE_ENABLE |
> ALPM_CTL_EXTENDED_FAST_WAKE_TIME(intel_dp->alpm_parameters.fast_wake_lines);
> @@ -408,6 +390,36 @@ void intel_alpm_configure(struct intel_dp *intel_dp,
> intel_dp->alpm_parameters.transcoder = crtc_state->cpu_transcoder;
> }
>
> +void intel_alpm_port_configure(struct intel_dp *intel_dp,
> + const struct intel_crtc_state *crtc_state)
> +{
> + struct intel_display *display = to_intel_display(intel_dp);
> + enum port port = dp_to_dig_port(intel_dp)->base.port;
> + u32 alpm_ctl_val = 0, lfps_ctl_val = 0;
> +
> + if (DISPLAY_VER(display) < 20)
> + return;
> +
> + if (intel_alpm_is_alpm_aux_less(intel_dp, crtc_state)) {
> + alpm_ctl_val = PORT_ALPM_CTL_ALPM_AUX_LESS_ENABLE |
> + PORT_ALPM_CTL_MAX_PHY_SWING_SETUP(15) |
> + PORT_ALPM_CTL_MAX_PHY_SWING_HOLD(0) |
> + PORT_ALPM_CTL_SILENCE_PERIOD(
> + intel_dp->alpm_parameters.silence_period_sym_clocks);
> + lfps_ctl_val = PORT_ALPM_LFPS_CTL_LFPS_CYCLE_COUNT(10) |
> + PORT_ALPM_LFPS_CTL_LFPS_HALF_CYCLE_DURATION(
> + intel_dp->alpm_parameters.lfps_half_cycle_num_of_syms) |
> + PORT_ALPM_LFPS_CTL_FIRST_LFPS_HALF_CYCLE_DURATION(
> + intel_dp->alpm_parameters.lfps_half_cycle_num_of_syms) |
> + PORT_ALPM_LFPS_CTL_LAST_LFPS_HALF_CYCLE_DURATION(
> + intel_dp->alpm_parameters.lfps_half_cycle_num_of_syms);
> + }
> +
> + intel_de_write(display, PORT_ALPM_CTL(port), alpm_ctl_val);
> +
> + intel_de_write(display, PORT_ALPM_LFPS_CTL(port), lfps_ctl_val);
> +}
> +
> void intel_alpm_pre_plane_update(struct intel_atomic_state *state,
> struct intel_crtc *crtc)
> {
> diff --git a/drivers/gpu/drm/i915/display/intel_alpm.h b/drivers/gpu/drm/i915/display/intel_alpm.h
> index 86f4d5ab1981..a861c20b5d79 100644
> --- a/drivers/gpu/drm/i915/display/intel_alpm.h
> +++ b/drivers/gpu/drm/i915/display/intel_alpm.h
> @@ -27,6 +27,8 @@ void intel_alpm_enable_sink(struct intel_dp *intel_dp,
> const struct intel_crtc_state *crtc_state);
> void intel_alpm_pre_plane_update(struct intel_atomic_state *state,
> struct intel_crtc *crtc);
> +void intel_alpm_port_configure(struct intel_dp *intel_dp,
> + const struct intel_crtc_state *crtc_state);
> void intel_alpm_post_plane_update(struct intel_atomic_state *state,
> struct intel_crtc *crtc);
> void intel_alpm_lobf_debugfs_add(struct intel_connector *connector);
> diff --git a/drivers/gpu/drm/i915/display/intel_cx0_phy.c b/drivers/gpu/drm/i915/display/intel_cx0_phy.c
> index a82b93cbc81d..91118d115fd3 100644
> --- a/drivers/gpu/drm/i915/display/intel_cx0_phy.c
> +++ b/drivers/gpu/drm/i915/display/intel_cx0_phy.c
> @@ -10,6 +10,7 @@
>
> #include "i915_reg.h"
> #include "i915_utils.h"
> +#include "intel_alpm.h"
> #include "intel_cx0_phy.h"
> #include "intel_cx0_phy_regs.h"
> #include "intel_ddi.h"
> diff --git a/drivers/gpu/drm/i915/display/intel_ddi.c b/drivers/gpu/drm/i915/display/intel_ddi.c
> index 0e6d618b5356..65ab012c3eae 100644
> --- a/drivers/gpu/drm/i915/display/intel_ddi.c
> +++ b/drivers/gpu/drm/i915/display/intel_ddi.c
> @@ -3743,6 +3743,12 @@ static void mtl_ddi_prepare_link_retrain(struct intel_dp *intel_dp,
>
> intel_ddi_buf_enable(encoder, intel_dp->DP);
> intel_dp->DP |= DDI_BUF_CTL_ENABLE;
> +
> + /*
> + * 6.k If AUX-Less ALPM is going to be enabled
> + * i. Configure PORT_ALPM_CTL and PORT_ALPM_LFPS_CTL here
> + */
> + intel_alpm_port_configure(intel_dp, crtc_state);
> }
>
> static void intel_ddi_prepare_link_retrain(struct intel_dp *intel_dp,
next prev parent reply other threads:[~2025-05-21 4:54 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-05-20 16:53 [PATCH v2 00/12] Panel Replay + Adaptive sync Jouni Högander
2025-05-20 16:53 ` [PATCH v2 01/12] drm/panelreplay: Panel Replay capability DPCD register definitions Jouni Högander
2025-05-21 4:50 ` Nautiyal, Ankit K
2025-05-20 16:53 ` [PATCH v2 02/12] drm/dp: Add Panel Replay capability bits from DP2.1 specification Jouni Högander
2025-05-21 4:49 ` Nautiyal, Ankit K
2025-05-21 5:40 ` Hogander, Jouni
2025-05-20 16:53 ` [PATCH v2 03/12] drm/i915/psr: Read all Panel Replay capability registers from DPCD Jouni Högander
2025-05-21 4:52 ` Nautiyal, Ankit K
2025-05-20 16:53 ` [PATCH v2 04/12] drm/i915/alpm: Add PR_ALPM_CTL register definitions Jouni Högander
2025-05-20 16:53 ` [PATCH v2 05/12] drm/i915/alpm: Write PR_ALPM_CTL register Jouni Högander
2025-05-20 16:53 ` [PATCH v2 06/12] drm/i915/psr: Add interface to check if AUXLess ALPM is needed by PSR Jouni Högander
2025-05-20 16:53 ` [PATCH v2 07/12] drm/i915/alpm: Add new interface to check if AUXLess ALPM is used Jouni Högander
2025-05-20 16:53 ` [PATCH v2 08/12] drm/i915/alpm: Move port alpm configuration Jouni Högander
2025-05-21 4:53 ` Nautiyal, Ankit K [this message]
2025-05-20 16:53 ` [PATCH v2 09/12] drm/i915/display: Add PHY_CMN1_CONTROL register definitions Jouni Högander
2025-05-20 16:53 ` [PATCH v2 10/12] drm/i915/display: Add function to configure LFPS sending Jouni Högander
2025-05-21 5:00 ` Nautiyal, Ankit K
2025-05-21 5:42 ` Hogander, Jouni
2025-05-20 16:53 ` [PATCH v2 11/12] drm/i915/psr: Fix using wrong mask in REG_FIELD_PREP Jouni Högander
2025-05-20 16:53 ` [PATCH v2 12/12] drm/i915/psr: Do not disable Panel Replay in case VRR is enabled Jouni Högander
2025-05-21 5:01 ` Nautiyal, Ankit K
2025-05-21 5:42 ` Hogander, Jouni
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=6038d503-07ea-4085-973d-77224d45937d@intel.com \
--to=ankit.k.nautiyal@intel.com \
--cc=dri-devel@lists.freedesktop.org \
--cc=intel-gfx@lists.freedesktop.org \
--cc=intel-xe@lists.freedesktop.org \
--cc=jouni.hogander@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox