dri-devel Archive on lore.kernel.org
 help / color / mirror / Atom feed
  • * Re: [PATCH v4 1/3] drm/loongson: Add DRM Driver for Loongson 7A1000 bridge chip
       [not found] <20210730094148.620768-1-lichenyang@loongson.cn>
       [not found] ` <20210730094148.620768-2-lichenyang@loongson.cn>
@ 2021-08-04 21:12 ` Sam Ravnborg
       [not found] ` <20210730094148.620768-3-lichenyang@loongson.cn>
  2 siblings, 0 replies; 4+ messages in thread
From: Sam Ravnborg @ 2021-08-04 21:12 UTC (permalink / raw)
  To: lichenyang, Thomas Zimmermann
  Cc: Maxime Ripard, Maarten Lankhorst, Thomas Zimmermann,
	Dan Carpenter, David Airlie, Daniel Vetter, dri-devel, devel,
	Huacai Chen

Hi Chenyang,

some feedback in the following.
I will try to find more time for review during the week.

Hi Thomas,

please see my question near drm_gem_vram_of_gem().

	Sam

On Fri, Jul 30, 2021 at 05:41:46PM +0800, lichenyang wrote:
> From: Chenyang Li <lichenyang@loongson.cn>
> 
> This patch adds an initial DRM driver for the Loongson LS7A1000
> bridge chip(LS7A). The LS7A bridge chip contains two display
> controllers, support dual display output. The maximum support for
> each channel display is to 1920x1080@60Hz.
> At present, DC device detection and DRM driver registration are
> completed, the crtc/plane/encoder/connector objects has been
> implemented.
> On Loongson 3A4000 CPU and 7A1000 system, we have achieved the use
> of dual screen, and support dual screen clone mode and expansion
> mode.
> 
> v10:
> - Replace the drmm_ version functions.
> - Replace the simple_encoder version function.
> - Alphabetize file names.
> 
> v9:
> - Optimize the error handling process.
> - Remove the useless flags parameter.
> - Fix some incorrect use of variables and constructs.
> 
> v8:
> - Update the atomic_update function interface.
> 
> v7:
> - The pixel clock is limited to less than 173000.
> 
> v6:
> - Remove spin_lock in mmio reg read and write.
> - TO_UNCAC is replac with ioremap.
> - Fix error arguments in crtc_atomic_enable/disable/mode_valid.
> 
> v5:
> - Change the name of the chip to LS7A.
> - Change magic value in crtc to macros.
> - Correct mistakes words.
> - Change the register operation function prefix to ls7a.
> 
> v4:
> - Move the mode_valid function to the crtc.
> 
> v3:
> - Move the mode_valid function to the connector and optimize it.
> - Fix num_crtc calculation method.
> 
> v2:
> - Complete the case of 32-bit color in CRTC.
> 
> Signed-off-by: Chenyang Li <lichenyang@loongson.cn>
> ---
>  drivers/gpu/drm/Kconfig                       |   2 +
>  drivers/gpu/drm/Makefile                      |   1 +
>  drivers/gpu/drm/loongson/Kconfig              |  14 +
>  drivers/gpu/drm/loongson/Makefile             |  14 +
>  drivers/gpu/drm/loongson/loongson_connector.c |  47 +++
>  drivers/gpu/drm/loongson/loongson_crtc.c      | 238 +++++++++++++++
>  drivers/gpu/drm/loongson/loongson_device.c    |  35 +++
>  drivers/gpu/drm/loongson/loongson_drv.c       | 271 ++++++++++++++++++
>  drivers/gpu/drm/loongson/loongson_drv.h       | 149 ++++++++++
>  drivers/gpu/drm/loongson/loongson_encoder.c   |  21 ++
>  drivers/gpu/drm/loongson/loongson_plane.c     |  92 ++++++
>  11 files changed, 884 insertions(+)
>  create mode 100644 drivers/gpu/drm/loongson/Kconfig
>  create mode 100644 drivers/gpu/drm/loongson/Makefile
>  create mode 100644 drivers/gpu/drm/loongson/loongson_connector.c
>  create mode 100644 drivers/gpu/drm/loongson/loongson_crtc.c
>  create mode 100644 drivers/gpu/drm/loongson/loongson_device.c
>  create mode 100644 drivers/gpu/drm/loongson/loongson_drv.c
>  create mode 100644 drivers/gpu/drm/loongson/loongson_drv.h
>  create mode 100644 drivers/gpu/drm/loongson/loongson_encoder.c
>  create mode 100644 drivers/gpu/drm/loongson/loongson_plane.c
> 
> diff --git a/drivers/gpu/drm/Kconfig b/drivers/gpu/drm/Kconfig
> index 7ff89690a976..08562d9be6e3 100644
> --- a/drivers/gpu/drm/Kconfig
> +++ b/drivers/gpu/drm/Kconfig
> @@ -365,6 +365,8 @@ source "drivers/gpu/drm/xen/Kconfig"
>  
>  source "drivers/gpu/drm/vboxvideo/Kconfig"
>  
> +source "drivers/gpu/drm/loongson/Kconfig"
> +
>  source "drivers/gpu/drm/lima/Kconfig"
Preferably in alphabetical order, so after lima.

>  
>  source "drivers/gpu/drm/panfrost/Kconfig"
> diff --git a/drivers/gpu/drm/Makefile b/drivers/gpu/drm/Makefile
> index a118692a6df7..29c05b8cf2ad 100644
> --- a/drivers/gpu/drm/Makefile
> +++ b/drivers/gpu/drm/Makefile
> @@ -119,6 +119,7 @@ obj-$(CONFIG_DRM_PL111) += pl111/
>  obj-$(CONFIG_DRM_TVE200) += tve200/
>  obj-$(CONFIG_DRM_XEN) += xen/
>  obj-$(CONFIG_DRM_VBOXVIDEO) += vboxvideo/
> +obj-$(CONFIG_DRM_LOONGSON) += loongson/
>  obj-$(CONFIG_DRM_LIMA)  += lima/
Likewise, after lima

>  obj-$(CONFIG_DRM_PANFROST) += panfrost/
>  obj-$(CONFIG_DRM_ASPEED_GFX) += aspeed/
> diff --git a/drivers/gpu/drm/loongson/Kconfig b/drivers/gpu/drm/loongson/Kconfig
> new file mode 100644
> index 000000000000..3cf42a4cca08
> --- /dev/null
> +++ b/drivers/gpu/drm/loongson/Kconfig
> @@ -0,0 +1,14 @@
> +# SPDX-License-Identifier: GPL-2.0-only
> +
> +config DRM_LOONGSON
> +	tristate "DRM support for LS7A bridge chipset"
> +	depends on DRM && PCI
> +	depends on CPU_LOONGSON64
Maybe add || COMPILE_TEST - so we get better build coverage.
You risk we miss this driver when we do refactoring, if we cannot build
it using an allmodconfig for example.

> +	select DRM_KMS_HELPER
> +	select DRM_VRAM_HELPER
> +	select DRM_TTM
> +	select DRM_TTM_HELPER
Please verify that they are all needed.
There are no hits on "ttm" in the code, so the the two TTM symbols is
likely wrong.

> +	default n
Drop this. n is default.

> +	help
> +	  Support the display controllers found on the Loongson LS7A
> +	  bridge.
Consider adding a little more info here. For example the module name.


> diff --git a/drivers/gpu/drm/loongson/Makefile b/drivers/gpu/drm/loongson/Makefile
> new file mode 100644
> index 000000000000..d73ad44fe1d5
> --- /dev/null
> +++ b/drivers/gpu/drm/loongson/Makefile
> @@ -0,0 +1,14 @@
> +# SPDX-License-Identifier: GPL-2.0-only
> +#
> +# Makefile for loongson drm drivers.
> +# This driver provides support for the
> +# Direct Rendering Infrastructure (DRI)
> +
> +ccflags-y := -Iinclude/drm
Drop, this is not needed.

> +loongson-y := loongson_connector.o \
> +	loongson_crtc.o \
> +	loongson_device.o \
> +	loongson_drv.o \
> +	loongson_encoder.o \
> +	loongson_plane.o
> +obj-$(CONFIG_DRM_LOONGSON) += loongson.o
> diff --git a/drivers/gpu/drm/loongson/loongson_connector.c b/drivers/gpu/drm/loongson/loongson_connector.c
> new file mode 100644
> index 000000000000..a4762d8f9987
> --- /dev/null
> +++ b/drivers/gpu/drm/loongson/loongson_connector.c
> @@ -0,0 +1,47 @@
> +// SPDX-License-Identifier: GPL-2.0-or-later
> +
> +#include "loongson_drv.h"
> +
> +static int loongson_get_modes(struct drm_connector *connector)
> +{
> +	int count;
> +
> +	count = drm_add_modes_noedid(connector, 1920, 1080);
> +	drm_set_preferred_mode(connector, 1024, 768);
> +
> +	return count;
> +}
> +
> +static const struct drm_connector_helper_funcs loongson_connector_helper = {
> +	.get_modes = loongson_get_modes,
> +};
> +
> +static const struct drm_connector_funcs loongson_connector_funcs = {
> +	.fill_modes = drm_helper_probe_single_connector_modes,
> +	.destroy = drm_connector_cleanup,
> +	.reset = drm_atomic_helper_connector_reset,
> +	.atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state,
> +	.atomic_destroy_state = drm_atomic_helper_connector_destroy_state,
> +};
> +
> +int loongson_connector_init(struct loongson_device *ldev, int index)
> +{
> +	struct drm_device *dev = &ldev->dev;
> +	struct drm_connector *connector;
> +	struct loongson_connector *lconnector;
> +
> +	lconnector = kzalloc(sizeof(struct loongson_connector), GFP_KERNEL);
> +	if (!lconnector)
> +		return -ENOMEM;
> +
> +	lconnector->ldev = ldev;
> +	lconnector->id = index;
> +
> +	ldev->mode_info[index].connector = lconnector;
> +	connector = &lconnector->base;
> +	drm_connector_init(dev, connector, &loongson_connector_funcs,
> +			   DRM_MODE_CONNECTOR_Unknown);
> +	drm_connector_helper_add(connector, &loongson_connector_helper);
> +
> +	return 0;
> +}
As already said in another mail - convert the i2c to a brige and then
use the drm_bridge_connector - this is a more standard solution today.

And the connector needs to be specified, but it can come via the device
tree and then be added as a chained bridge.
This will be simple when the i2c parts are a bridge.


> diff --git a/drivers/gpu/drm/loongson/loongson_crtc.c b/drivers/gpu/drm/loongson/loongson_crtc.c
> new file mode 100644
> index 000000000000..b9eee34deab2
> --- /dev/null
> +++ b/drivers/gpu/drm/loongson/loongson_crtc.c
> @@ -0,0 +1,238 @@
> +// SPDX-License-Identifier: GPL-2.0-or-later
> +
> +#include "loongson_drv.h"
> +
> +static void try_each_loopc(u32 clk, u32 pstdiv, u32 frefc,
> +			   struct pix_pll *pll_config)
> +{
> +	u32 loopc;
> +	u32 clk_out;
> +	u32 precision;
> +	u32 min = 1000;
> +	u32 base_clk = 100000L;
> +
> +	for (loopc = LOOPC_MIN; loopc < LOOPC_MAX; loopc++) {
> +		if ((loopc < FRE_REF_MIN * frefc) ||
> +		    (loopc > FRE_REF_MAX * frefc))
> +			continue;
> +
> +		clk_out = base_clk * loopc / frefc;
> +		precision = (clk > clk_out) ? (clk - clk_out) : (clk_out - clk);
> +		if (precision < min) {
> +			pll_config->l2_div = pstdiv;
> +			pll_config->l1_loopc = loopc;
> +			pll_config->l1_frefc = frefc;
> +		}
This looks very inefficient, as you may have several writes to
pll_config. 
> +	}
> +}
> +
> +static void cal_freq(u32 pixclock, struct pix_pll *pll_config)
> +{
> +	u32 pstdiv;
> +	u32 frefc;
> +	u32 clk;
> +
> +	for (pstdiv = 1; pstdiv < PST_DIV_MAX; pstdiv++) {
> +		clk = pixclock * pstdiv;
> +		for (frefc = DIV_REF_MIN; frefc <= DIV_REF_MAX; frefc++)
> +			try_each_loopc(clk, pstdiv, frefc, pll_config);
> +	}
> +}
So you call the inefficient loop in try_each_loopc in another loop.
I hope it is possible to re-think this - as it looks very inefficient.
Maybe it is needed to be like this, in which case you can just ignore my
comments.

> +
> +static void config_pll(struct loongson_device *ldev, unsigned long pll_base,
> +		       struct pix_pll *pll_cfg)
> +{
> +	u32 val;
> +	u32 count = 0;
> +
> +	/* clear sel_pll_out0 */
> +	val = ls7a_io_rreg(ldev, pll_base + 0x4);
> +	val &= ~(1UL << 8);
> +	ls7a_io_wreg(ldev, pll_base + 0x4, val);

Any change for proper defines for all these hardcoded numbers?
That may help a little with the readability.

> +
> +	/* set pll_pd */
> +	val = ls7a_io_rreg(ldev, pll_base + 0x4);
> +	val |= (1UL << 13);
> +	ls7a_io_wreg(ldev, pll_base + 0x4, val);
> +
> +	/* clear set_pll_param */
> +	val = ls7a_io_rreg(ldev, pll_base + 0x4);
> +	val &= ~(1UL << 11);
> +	ls7a_io_wreg(ldev, pll_base + 0x4, val);
> +
> +	/* clear old value & config new value */
> +	val = ls7a_io_rreg(ldev, pll_base + 0x4);
> +	val &= ~(0x7fUL << 0);
> +	val |= (pll_cfg->l1_frefc << 0); /* refc */
> +	ls7a_io_wreg(ldev, pll_base + 0x4, val);
> +	val = ls7a_io_rreg(ldev, pll_base + 0x0);
> +	val &= ~(0x7fUL << 0);
> +	val |= (pll_cfg->l2_div << 0); /* div */
> +	val &= ~(0x1ffUL << 21);
> +	val |= (pll_cfg->l1_loopc << 21); /* loopc */
> +	ls7a_io_wreg(ldev, pll_base + 0x0, val);
> +
> +	/* set set_pll_param */
> +	val = ls7a_io_rreg(ldev, pll_base + 0x4);
> +	val |= (1UL << 11);
> +	ls7a_io_wreg(ldev, pll_base + 0x4, val);
> +	/* clear pll_pd */
> +	val = ls7a_io_rreg(ldev, pll_base + 0x4);
> +	val &= ~(1UL << 13);
> +	ls7a_io_wreg(ldev, pll_base + 0x4, val);
> +
> +	while (!(ls7a_io_rreg(ldev, pll_base + 0x4) & 0x80)) {
> +		cpu_relax();
> +		count++;
> +		if (count >= 1000) {
> +			drm_err(&ldev->dev, "loongson-7A PLL lock failed\n");
> +			break;
> +		}
> +	}
> +
> +	val = ls7a_io_rreg(ldev, pll_base + 0x4);
> +	val |= (1UL << 8);
> +	ls7a_io_wreg(ldev, pll_base + 0x4, val);
> +}
> +
> +static void loongson_crtc_mode_set_nofb(struct drm_crtc *crtc)
> +{
> +	struct drm_device *dev = crtc->dev;
> +	struct loongson_device *ldev = to_loongson_device(dev);
> +	struct loongson_crtc *lcrtc = to_loongson_crtc(crtc);
> +	struct drm_display_mode *mode = &crtc->state->adjusted_mode;
> +	const struct drm_format_info *format;
> +	struct pix_pll pll_cfg;
> +	u32 hr, hss, hse, hfl;
> +	u32 vr, vss, vse, vfl;
> +	u32 pix_freq;
> +	u32 reg_offset;
> +
> +	hr = mode->hdisplay;
> +	hss = mode->hsync_start;
> +	hse = mode->hsync_end;
> +	hfl = mode->htotal;
> +
> +	vr = mode->vdisplay;
> +	vss = mode->vsync_start;
> +	vse = mode->vsync_end;
> +	vfl = mode->vtotal;
> +
> +	pix_freq = mode->clock;
> +	reg_offset = lcrtc->reg_offset;
> +	format = crtc->primary->state->fb->format;
> +
> +	ls7a_mm_wreg(ldev, FB_DITCFG_REG + reg_offset, 0);
> +	ls7a_mm_wreg(ldev, FB_DITTAB_LO_REG + reg_offset, 0);
> +	ls7a_mm_wreg(ldev, FB_DITTAB_HI_REG + reg_offset, 0);
> +	ls7a_mm_wreg(ldev, FB_PANCFG_REG + reg_offset, FB_PANCFG_DEF);
> +	ls7a_mm_wreg(ldev, FB_PANTIM_REG + reg_offset, 0);
> +
> +	ls7a_mm_wreg(ldev, FB_HDISPLAY_REG + reg_offset, (hfl << 16) | hr);
> +	ls7a_mm_wreg(ldev, FB_HSYNC_REG + reg_offset,
> +		     FB_HSYNC_PULSE | (hse << 16) | hss);
> +
> +	ls7a_mm_wreg(ldev, FB_VDISPLAY_REG + reg_offset, (vfl << 16) | vr);
> +	ls7a_mm_wreg(ldev, FB_VSYNC_REG + reg_offset,
> +		     FB_VSYNC_PULSE | (vse << 16) | vss);
> +
> +	switch (format->format) {
> +	case DRM_FORMAT_RGB565:
> +		lcrtc->cfg_reg |= 0x3;
> +		break;
> +	case DRM_FORMAT_RGB888:
> +	case DRM_FORMAT_XRGB8888:
> +	case DRM_FORMAT_ARGB8888:
> +	default:
> +		lcrtc->cfg_reg |= 0x4;
> +		break;
> +	}
As a general rule - an empty line after a closing brace.
> +	ls7a_mm_wreg(ldev, FB_CFG_REG + reg_offset, lcrtc->cfg_reg);
> +
> +	cal_freq(pix_freq, &pll_cfg);
> +	config_pll(ldev, LS7A_PIX_PLL + reg_offset, &pll_cfg);
> +}
> +
> +static void loongson_crtc_atomic_enable(struct drm_crtc *crtc,
> +					struct drm_atomic_state *old_state)
> +{
> +	struct drm_device *dev = crtc->dev;
> +	struct loongson_device *ldev = to_loongson_device(dev);
> +	struct loongson_crtc *lcrtc = to_loongson_crtc(crtc);
> +	u32 reg_offset = lcrtc->reg_offset;
> +
> +	lcrtc->cfg_reg |= CFG_ENABLE;
> +	ls7a_mm_wreg(ldev, FB_CFG_REG + reg_offset, lcrtc->cfg_reg);
> +}
> +
> +static void loongson_crtc_atomic_disable(struct drm_crtc *crtc,
> +					 struct drm_atomic_state *old_state)
> +{
> +	struct drm_device *dev = crtc->dev;
> +	struct loongson_device *ldev = to_loongson_device(dev);
> +	struct loongson_crtc *lcrtc = to_loongson_crtc(crtc);
> +	u32 reg_offset = lcrtc->reg_offset;
> +
> +	lcrtc->cfg_reg &= ~CFG_ENABLE;
> +	ls7a_mm_wreg(ldev, FB_CFG_REG + reg_offset, lcrtc->cfg_reg);
> +}
> +
> +static enum drm_mode_status loongson_mode_valid(struct drm_crtc *crtc,
> +						const struct drm_display_mode *mode)
> +{
> +	if (mode->hdisplay > 1920)
> +		return MODE_BAD;
> +	if (mode->vdisplay > 1080)
> +		return MODE_BAD;
> +	if (mode->hdisplay % 64)
> +		return MODE_BAD;
> +	if (mode->clock >= 173000)
> +		return MODE_CLOCK_HIGH;
> +
> +	return MODE_OK;
> +}
> +
> +static const struct drm_crtc_helper_funcs loongson_crtc_helper_funcs = {
> +	.mode_valid = loongson_mode_valid,
> +	.atomic_enable = loongson_crtc_atomic_enable,
> +	.atomic_disable = loongson_crtc_atomic_disable,
> +	.mode_set_nofb = loongson_crtc_mode_set_nofb,
> +};
> +
> +static const struct drm_crtc_funcs loongson_crtc_funcs = {
> +	.set_config = drm_atomic_helper_set_config,
> +	.page_flip = drm_atomic_helper_page_flip,
> +	.reset = drm_atomic_helper_crtc_reset,
> +	.atomic_duplicate_state = drm_atomic_helper_crtc_duplicate_state,
> +	.atomic_destroy_state = drm_atomic_helper_crtc_destroy_state,
> +};
> +
> +int loongson_crtc_init(struct loongson_device *ldev, int index)
> +{
> +	struct drm_device *dev = &ldev->dev;
> +	struct loongson_plane *plane;
> +	struct loongson_crtc *lcrtc;
> +
> +	plane = loongson_plane_init(dev, index);
> +	if (IS_ERR(plane))
> +		return PTR_ERR(plane);
> +
> +	lcrtc = drmm_crtc_alloc_with_planes(dev, struct loongson_crtc, base,
> +					    &plane->base, NULL,
> +					    &loongson_crtc_funcs, NULL);
> +	if (IS_ERR(lcrtc))
> +		return PTR_ERR(lcrtc);
> +
> +	lcrtc->ldev = ldev;
> +	lcrtc->reg_offset = index * REG_OFFSET;
> +	lcrtc->cfg_reg = CFG_RESET;
> +	lcrtc->crtc_id = index;
> +	lcrtc->plane = plane;
> +
> +	drm_crtc_helper_add(&lcrtc->base, &loongson_crtc_helper_funcs);
> +
> +	ldev->mode_info[index].crtc = lcrtc;
> +
> +	return 0;
> +}
> +
> diff --git a/drivers/gpu/drm/loongson/loongson_device.c b/drivers/gpu/drm/loongson/loongson_device.c
> new file mode 100644
> index 000000000000..a79d64fc1a06
> --- /dev/null
> +++ b/drivers/gpu/drm/loongson/loongson_device.c
> @@ -0,0 +1,35 @@
> +// SPDX-License-Identifier: GPL-2.0-or-later
> +
> +#include "loongson_drv.h"
> +
> +u32 loongson_gpu_offset(struct drm_plane_state *state,
> +			struct loongson_device *ldev)
> +{
> +	struct drm_gem_vram_object *gbo;
> +	u32 gpu_addr;
> +
> +	gbo = drm_gem_vram_of_gem(state->fb->obj[0]);
> +	gpu_addr = ldev->vram_start + drm_gem_vram_offset(gbo);

@Thomas Zimmermann - can this be improved?

> +
> +	return gpu_addr;
> +}
> +

Have you considered to use  regmap for all these register access.
It looks like the correct abstraction to use here.


> +u32 ls7a_io_rreg(struct loongson_device *ldev, u32 offset)
> +{
> +	return readl(ldev->io + offset);
> +}
> +
> +void ls7a_io_wreg(struct loongson_device *ldev, u32 offset, u32 val)
> +{
> +	writel(val, ldev->io + offset);
> +}
> +

And another regmap for these.
> +u32 ls7a_mm_rreg(struct loongson_device *ldev, u32 offset)
> +{
> +	return readl(ldev->mmio + offset);
> +}
> +
> +void ls7a_mm_wreg(struct loongson_device *ldev, u32 offset, u32 val)
> +{
> +	writel(val, ldev->mmio + offset);
> +}
> diff --git a/drivers/gpu/drm/loongson/loongson_drv.c b/drivers/gpu/drm/loongson/loongson_drv.c
> new file mode 100644
> index 000000000000..2224a03adc1a
> --- /dev/null
> +++ b/drivers/gpu/drm/loongson/loongson_drv.c
> @@ -0,0 +1,271 @@
> +// SPDX-License-Identifier: GPL-2.0-or-later
> +/*
> + * Loongson LS7A1000 bridge chipset drm driver
> + */
> +
> +#include <linux/console.h>
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/pci.h>
> +
> +#include "loongson_drv.h"
> +
> +/* Interface history:
> + * 0.1 - original.
> + */
> +#define DRIVER_MAJOR 0
> +#define DRIVER_MINOR 1
> +
> +static const struct drm_mode_config_funcs loongson_mode_funcs = {
> +	.fb_create = drm_gem_fb_create,
> +	.atomic_check = drm_atomic_helper_check,
> +	.atomic_commit = drm_atomic_helper_commit,
> +	.output_poll_changed = drm_fb_helper_output_poll_changed,
> +	.mode_valid = drm_vram_helper_mode_valid
> +};
> +
> +static int loongson_device_init(struct drm_device *dev)
> +{
> +	struct loongson_device *ldev = to_loongson_device(dev);
> +	struct pci_dev *pdev = to_pci_dev(dev->dev);
> +	struct pci_dev *gpu_pdev;
> +	resource_size_t aper_base;
> +	resource_size_t aper_size;
> +	resource_size_t mmio_base;
> +	resource_size_t mmio_size;
> +	int ret;
> +
> +	/* GPU MEM */
> +	/* We need get 7A-gpu pci device information for ldev->gpu_pdev */
> +	/* dev->pdev save 7A-dc pci device information */
> +	gpu_pdev = pci_get_device(PCI_VENDOR_ID_LOONGSON,
> +				  PCI_DEVICE_ID_LOONGSON_GPU, NULL);
> +	ret = pci_enable_device(gpu_pdev);
Consider to use pcim_enable_device - you get come cleanup for free then.

> +	if (ret)
> +		return ret;
> +	pci_set_drvdata(gpu_pdev, dev);
> +
> +	aper_base = pci_resource_start(gpu_pdev, 2);
> +	aper_size = pci_resource_len(gpu_pdev, 2);
> +	ldev->vram_start = aper_base;
> +	ldev->vram_size = aper_size;
> +
> +	if (!devm_request_mem_region(dev->dev, ldev->vram_start,
> +				     ldev->vram_size, "loongson_vram")) {
> +		drm_err(dev, "Can't reserve VRAM\n");
> +		return -ENXIO;
> +	}
> +
> +	/* DC MEM */
> +	mmio_base = pci_resource_start(pdev, 0);
> +	mmio_size = pci_resource_len(pdev, 0);
> +	ldev->mmio = devm_ioremap(dev->dev, mmio_base, mmio_size);
> +	if (!ldev->mmio) {
> +		drm_err(dev, "Cannot map mmio region\n");
> +		return -ENOMEM;
> +	}
> +
> +	if (!devm_request_mem_region(dev->dev, mmio_base,
> +				     mmio_size, "loongson_mmio")) {
> +		drm_err(dev, "Can't reserve mmio registers\n");
> +		return -ENOMEM;
> +	}
> +
> +	/* DC IO */
> +	ldev->io = devm_ioremap(dev->dev, LS7A_CHIPCFG_REG_BASE, 0xf);
> +	if (!ldev->io)
> +		return -ENOMEM;
> +
> +	drm_info(dev, "DC mmio base 0x%llx size 0x%llx io 0x%llx\n",
> +		 mmio_base, mmio_size, *(u64 *)ldev->io);
> +	drm_info(dev, "GPU vram start = 0x%x size = 0x%x\n",
> +		 ldev->vram_start, ldev->vram_size);
> +
> +	return 0;
> +}
> +
> +int loongson_modeset_init(struct loongson_device *ldev)
> +{
> +	struct drm_encoder *encoder;
> +	struct drm_connector *connector;
> +	int i;
> +	int ret;
> +
> +	for (i = 0; i < 2; i++) {
Why 2 - could you use a constant here?

> +		ret = loongson_crtc_init(ldev, i);
> +		if (ret) {
> +			drm_warn(&ldev->dev, "loongson crtc%d init fail\n", i);
> +			continue;
> +		}
> +
> +		ret = loongson_encoder_init(ldev, i);
> +		if (ret) {
> +			drm_err(&ldev->dev, "loongson_encoder_init failed\n");
> +			return ret;
> +		}
> +
> +		ret = loongson_connector_init(ldev, i);
> +		if (ret) {
> +			drm_err(&ldev->dev, "loongson_connector_init failed\n");
> +			return ret;
> +		}
> +
> +		encoder = &ldev->mode_info[i].encoder->base;
> +		connector = &ldev->mode_info[i].connector->base;
> +		drm_connector_attach_encoder(connector, encoder);
> +		ldev->num_crtc++;
> +	}
> +
> +	return 0;
> +}
> +
> +static int loongson_driver_init(struct drm_device *dev)
> +{
> +	struct loongson_device *ldev = to_loongson_device(dev);
> +	int ret;
> +
> +	ret = loongson_device_init(dev);
> +	if (ret)
> +		goto err;
> +
> +	ret = drmm_vram_helper_init(dev, ldev->vram_start, ldev->vram_size);
> +	if (ret) {
> +		drm_err(dev, "Error initializing vram %d\n", ret);
> +		goto err;
> +	}
> +
> +	drm_mode_config_init(dev);
Fro mthe documntation:

* FIXME: This function is deprecated and drivers should be converted over to
* drmm_mode_config_init().

> +	dev->mode_config.funcs = (void *)&loongson_mode_funcs;
> +	dev->mode_config.min_width = 1;
> +	dev->mode_config.min_height = 1;
> +	dev->mode_config.max_width = 4096;
> +	dev->mode_config.max_height = 4096;
> +	dev->mode_config.preferred_depth = 32;
> +	dev->mode_config.prefer_shadow = 1;
> +	dev->mode_config.fb_base = ldev->vram_start;
> +	dev->mode_config.allow_fb_modifiers = true;
> +
> +	ret = loongson_modeset_init(ldev);
> +	if (ret) {
> +		drm_err(dev, "Fatal error during modeset init: %d\n", ret);
> +		goto err;
> +	}
> +
> +	drm_kms_helper_poll_init(dev);
> +	drm_mode_config_reset(dev);
> +
> +	return 0;
> +
> +err:
> +	drm_err(dev, "failed to initialize drm driver: %d\n", ret);
> +	return ret;
> +}
> +
> +static void loongson_driver_fini(struct drm_device *dev)
> +{
> +	drm_vram_helper_release_mm(dev);
I think this is not needed when you use drmm_vram_helper_init().

> +	drm_mode_config_cleanup(dev);
Drop this when you use drmm_ variant.

> +	dev->dev_private = NULL;
> +	dev_set_drvdata(dev->dev, NULL);
> +}
> +
> +DEFINE_DRM_GEM_FOPS(fops);
> +
> +static struct drm_driver loongson_driver = {
> +	.driver_features = DRIVER_MODESET | DRIVER_GEM | DRIVER_ATOMIC,
> +	.fops = &fops,
> +	DRM_GEM_VRAM_DRIVER,
> +
> +	.name = DRIVER_NAME,
> +	.desc = DRIVER_DESC,
> +	.date = DRIVER_DATE,
> +	.major = DRIVER_MAJOR,
> +	.minor = DRIVER_MINOR,
> +};
> +
> +static int loongson_pci_probe(struct pci_dev *pdev,
> +			      const struct pci_device_id *ent)
> +{
> +	struct loongson_device *ldev;
> +	struct drm_device *dev;
> +	int ret;
> +
> +	DRM_INFO("Start loongson drm probe.\n");
> +	ldev = devm_drm_dev_alloc(&pdev->dev, &loongson_driver,
> +				  struct loongson_device, dev);
This shoud use devm_drm_dev_alloc
See "Display driver example" in drm_drv.c

Following this example will fix a few things in the code below.
> +	if (IS_ERR(ldev))
> +		return PTR_ERR(ldev);
> +
> +	dev = &ldev->dev;
> +	pci_set_drvdata(pdev, dev);
> +
> +	ret = pci_enable_device(pdev);
> +	if (ret) {
> +		drm_err(dev, "failed to enable pci device: %d\n", ret);
> +		goto err_free;
> +	}
> +
> +	ret = loongson_driver_init(dev);
> +	if (ret) {
> +		drm_err(dev, "failed to load loongson: %d\n", ret);
> +		goto err_pdev;
> +	}
> +
> +	ret = drm_dev_register(dev, 0);
> +	if (ret) {
> +		drm_err(dev, "failed to register drv for userspace access: %d\n",
> +			ret);
> +		goto driver_fini;
> +	}
> +
> +	drm_fbdev_generic_setup(dev, dev->mode_config.preferred_depth);
> +	DRM_INFO("loongson fbdev enabled.\n");
> +
> +	return 0;
> +
> +driver_fini:
> +	loongson_driver_fini(dev);
> +err_pdev:
> +	pci_disable_device(pdev);
> +err_free:
> +	drm_dev_put(dev);
> +	return ret;
> +}
> +
> +static void loongson_pci_remove(struct pci_dev *pdev)
> +{
> +	struct drm_device *dev = pci_get_drvdata(pdev);
> +
> +	drm_dev_unregister(dev);
> +	loongson_driver_fini(dev);
> +	drm_dev_put(dev);
Not needed when you use drmm infrastructure for allocating drm_device.
> +}
> +
> +static struct pci_device_id loongson_pci_devices[] = {
> +	{ PCI_DEVICE(PCI_VENDOR_ID_LOONGSON, PCI_DEVICE_ID_LOONGSON_DC) },
> +	{0,}
> +};
> +
> +static struct pci_driver loongson_drm_pci_driver = {
> +	.name = DRIVER_NAME,
> +	.id_table = loongson_pci_devices,
> +	.probe = loongson_pci_probe,
> +	.remove = loongson_pci_remove,
> +};
> +
> +static int __init loongson_drm_init(void)
> +{
> +	return pci_register_driver(&loongson_drm_pci_driver);
> +}
> +
> +static void __exit loongson_drm_exit(void)
> +{
> +	pci_unregister_driver(&loongson_drm_pci_driver);
> +}
> +
> +module_init(loongson_drm_init);
> +module_exit(loongson_drm_exit);
> +
> +MODULE_AUTHOR(DRIVER_AUTHOR);
> +MODULE_DESCRIPTION(DRIVER_DESC);
> +MODULE_LICENSE("GPL v2");
> diff --git a/drivers/gpu/drm/loongson/loongson_drv.h b/drivers/gpu/drm/loongson/loongson_drv.h
> new file mode 100644
> index 000000000000..75965d198212
> --- /dev/null
> +++ b/drivers/gpu/drm/loongson/loongson_drv.h
> @@ -0,0 +1,149 @@
> +/* SPDX-License-Identifier: GPL-2.0-only */
> +
> +#ifndef __LOONGSON_DRV_H__
> +#define __LOONGSON_DRV_H__
> +
> +#include <drm/drm_atomic.h>
> +#include <drm/drm_atomic_helper.h>
> +#include <drm/drm_connector.h>
> +#include <drm/drm_crtc.h>
> +#include <drm/drm_crtc_helper.h>
> +#include <drm/drm_drv.h>
> +#include <drm/drm_encoder.h>
> +#include <drm/drm_fb_helper.h>
> +#include <drm/drm_fourcc.h>
> +#include <drm/drm_gem.h>
> +#include <drm/drm_gem_framebuffer_helper.h>
> +#include <drm/drm_gem_vram_helper.h>
> +#include <drm/drm_probe_helper.h>
> +#include <drm/drm_plane.h>
> +#include <drm/drm_plane_helper.h>
The header file should only include the header file needed here.
.c file should include whatever else they need.

Also - use forward declaration as preference to including a header file.

> +
> +/* General customization:
> + */
> +#define DRIVER_AUTHOR "Loongson graphics driver team"
> +#define DRIVER_NAME "loongson-drm"
> +#define DRIVER_DESC "Loongson LS7A DRM driver"
> +#define DRIVER_DATE "20200915"
> +
> +#define to_loongson_crtc(x) container_of(x, struct loongson_crtc, base)
> +#define to_loongson_encoder(x) container_of(x, struct loongson_encoder, base)
> +
> +#define LS7A_CHIPCFG_REG_BASE (0x10010000)
> +#define PCI_DEVICE_ID_LOONGSON_DC 0x7a06
> +#define PCI_DEVICE_ID_LOONGSON_GPU 0x7a15
> +#define LS7A_PIX_PLL (0x04b0)
> +#define REG_OFFSET (0x10)
> +#define FB_CFG_REG (0x1240)
> +#define FB_ADDR0_REG (0x1260)
> +#define FB_ADDR1_REG (0x1580)
> +#define FB_STRI_REG (0x1280)
> +#define FB_DITCFG_REG (0x1360)
> +#define FB_DITTAB_LO_REG (0x1380)
> +#define FB_DITTAB_HI_REG (0x13a0)
> +#define FB_PANCFG_REG (0x13c0)
> +#define FB_PANTIM_REG (0x13e0)
> +#define FB_HDISPLAY_REG (0x1400)
> +#define FB_HSYNC_REG (0x1420)
> +#define FB_VDISPLAY_REG (0x1480)
> +#define FB_VSYNC_REG (0x14a0)
> +
> +#define CFG_FMT GENMASK(2, 0)
> +#define CFG_FBSWITCH BIT(7)
> +#define CFG_ENABLE BIT(8)
> +#define CFG_FBNUM BIT(11)
> +#define CFG_GAMMAR BIT(12)
> +#define CFG_RESET BIT(20)
> +
> +#define FB_PANCFG_DEF 0x80001311
> +#define FB_HSYNC_PULSE (1 << 30)
> +#define FB_VSYNC_PULSE (1 << 30)
> +
> +/* PIX PLL */
> +#define LOOPC_MIN 24
> +#define LOOPC_MAX 161
> +#define FRE_REF_MIN 12
> +#define FRE_REF_MAX 32
> +#define DIV_REF_MIN 3
> +#define DIV_REF_MAX 5
> +#define PST_DIV_MAX 64
> +
> +struct pix_pll {
> +	u32 l2_div;
> +	u32 l1_loopc;
> +	u32 l1_frefc;
> +};
> +
> +struct loongson_crtc {
> +	struct drm_crtc base;
> +	struct loongson_device *ldev;
> +	u32 crtc_id;
> +	u32 reg_offset;
> +	u32 cfg_reg;
> +	struct loongson_plane *plane;
> +};
> +
> +struct loongson_plane {
> +	struct drm_plane base;
> +};
> +
> +struct loongson_encoder {
> +	struct drm_encoder base;
> +	struct loongson_device *ldev;
> +	struct loongson_crtc *lcrtc;
> +};
> +
> +struct loongson_connector {
> +	struct drm_connector base;
> +	struct loongson_device *ldev;
> +	u16 id;
> +	u32 type;
> +};
> +
> +struct loongson_mode_info {
> +	struct loongson_device *ldev;
> +	struct loongson_crtc *crtc;
> +	struct loongson_encoder *encoder;
> +	struct loongson_connector *connector;
> +};
> +
> +struct loongson_device {
> +	struct drm_device dev;
> +	struct drm_atomic_state *state;
> +
> +	void __iomem *mmio;
> +	void __iomem *io;
> +	u32 vram_start;
> +	u32 vram_size;
> +
> +	u32 num_crtc;
> +	struct loongson_mode_info mode_info[2];
> +	struct pci_dev *gpu_pdev; /* LS7A gpu device info */
> +};

I did not check, but I think you can embed more into struct
loongson_device so data is allocated in less chunks.
And lifetime is easier to handle.


> +
> +static inline struct loongson_device *to_loongson_device(struct drm_device *dev)
> +{
> +	return container_of(dev, struct loongson_device, dev);
> +}
> +
> +/* crtc */
> +int loongson_crtc_init(struct loongson_device *ldev, int index);
> +
> +/* connector */
> +int loongson_connector_init(struct loongson_device *ldev, int index);
> +
> +/* encoder */
> +int loongson_encoder_init(struct loongson_device *ldev, int index);
> +
> +/* plane */
> +struct loongson_plane *loongson_plane_init(struct drm_device *dev, int index);
> +
> +/* device */
> +u32 loongson_gpu_offset(struct drm_plane_state *state,
> +			struct loongson_device *dev);
> +u32 ls7a_mm_rreg(struct loongson_device *ldev, u32 offset);
> +void ls7a_mm_wreg(struct loongson_device *ldev, u32 offset, u32 val);
> +u32 ls7a_io_rreg(struct loongson_device *ldev, u32 offset);
> +void ls7a_io_wreg(struct loongson_device *ldev, u32 offset, u32 val);
> +
> +#endif /* __LOONGSON_DRV_H__ */
> diff --git a/drivers/gpu/drm/loongson/loongson_encoder.c b/drivers/gpu/drm/loongson/loongson_encoder.c
> new file mode 100644
> index 000000000000..a6325cb261d4
> --- /dev/null
> +++ b/drivers/gpu/drm/loongson/loongson_encoder.c
> @@ -0,0 +1,21 @@
> +// SPDX-License-Identifier: GPL-2.0-or-later
> +
> +#include <drm/drm_simple_kms_helper.h>
> +
> +#include "loongson_drv.h"
> +
> +int loongson_encoder_init(struct loongson_device *ldev, int index)
> +{
> +	struct drm_device *dev = &ldev->dev;
> +	struct loongson_encoder *lencoder;
> +
> +	lencoder = drmm_simple_encoder_alloc(dev, struct loongson_encoder,
> +					     base, DRM_MODE_ENCODER_DAC);
> +	if (IS_ERR(lencoder))
> +		return PTR_ERR(lencoder);
> +
> +	lencoder->base.possible_crtcs = 1 << index;
> +	ldev->mode_info[index].encoder = lencoder;
> +
> +	return 0;
> +}
> diff --git a/drivers/gpu/drm/loongson/loongson_plane.c b/drivers/gpu/drm/loongson/loongson_plane.c
> new file mode 100644
> index 000000000000..b55b8d8628f0
> --- /dev/null
> +++ b/drivers/gpu/drm/loongson/loongson_plane.c
> @@ -0,0 +1,92 @@
> +// SPDX-License-Identifier: GPL-2.0-or-later
> +
> +#include "loongson_drv.h"
> +
> +static void loongson_plane_atomic_update(struct drm_plane *plane,
> +					 struct drm_atomic_state *state)
> +{
> +	struct loongson_crtc *lcrtc;
> +	struct loongson_device *ldev;
> +	struct drm_plane_state *lstate = plane->state;
> +	u32 gpu_addr = 0;
> +	u32 fb_addr = 0;
> +	u32 reg_val = 0;
> +	u32 reg_offset;
> +	u32 pitch;
> +	u8 depth;
> +	u32 x, y;
> +
> +	if (!lstate->crtc || !lstate->fb)
> +		return;
> +
> +	pitch = lstate->fb->pitches[0];
> +	lcrtc = to_loongson_crtc(lstate->crtc);
> +	ldev = lcrtc->ldev;
> +	reg_offset = lcrtc->reg_offset;
> +	x = lstate->crtc->x;
> +	y = lstate->crtc->y;
> +	depth = lstate->fb->format->cpp[0] << 3;
> +
> +	gpu_addr = loongson_gpu_offset(lstate, ldev);
> +	reg_val = (pitch + 255) & ~255;
> +	ls7a_mm_wreg(ldev, FB_STRI_REG + reg_offset, reg_val);
> +
> +	switch (depth) {
> +	case 12 ... 16:
> +		fb_addr = gpu_addr + y * pitch + ALIGN(x, 64) * 2;
> +		break;
> +	case 24 ... 32:
> +	default:
> +		fb_addr = gpu_addr + y * pitch + ALIGN(x, 64) * 4;
> +		break;
> +	}
> +
> +	ls7a_mm_wreg(ldev, FB_ADDR0_REG + reg_offset, fb_addr);
> +	ls7a_mm_wreg(ldev, FB_ADDR1_REG + reg_offset, fb_addr);
> +	reg_val = lcrtc->cfg_reg | CFG_ENABLE;
> +	ls7a_mm_wreg(ldev, FB_CFG_REG + reg_offset, reg_val);
> +}
> +
> +static const uint32_t loongson_formats[] = {
> +	DRM_FORMAT_RGB565,
> +	DRM_FORMAT_RGB888,
> +	DRM_FORMAT_XRGB8888,
> +	DRM_FORMAT_ARGB8888,
> +};
> +
> +static const uint64_t loongson_format_modifiers[] = { DRM_FORMAT_MOD_LINEAR,
> +						      DRM_FORMAT_MOD_INVALID };
> +
> +static const struct drm_plane_funcs loongson_plane_funcs = {
> +	.atomic_duplicate_state = drm_atomic_helper_plane_duplicate_state,
> +	.atomic_destroy_state = drm_atomic_helper_plane_destroy_state,
> +	.disable_plane = drm_atomic_helper_disable_plane,
> +	.reset = drm_atomic_helper_plane_reset,
> +	.update_plane = drm_atomic_helper_update_plane,
> +};
> +
> +static const struct drm_plane_helper_funcs loongson_plane_helper_funcs = {
> +	.prepare_fb	= drm_gem_vram_plane_helper_prepare_fb,
> +	.cleanup_fb	= drm_gem_vram_plane_helper_cleanup_fb,
> +	.atomic_update = loongson_plane_atomic_update,
> +};
> +
> +struct loongson_plane *loongson_plane_init(struct drm_device *dev, int index)
> +{
> +	struct loongson_plane *plane;
> +
> +	plane = drmm_universal_plane_alloc(dev, struct loongson_plane, base,
> +					   BIT(index), &loongson_plane_funcs,
> +					   loongson_formats,
> +					   ARRAY_SIZE(loongson_formats),
> +					   loongson_format_modifiers,
> +					   DRM_PLANE_TYPE_PRIMARY, NULL);
> +	if (IS_ERR(plane)) {
> +		drm_err(dev, "failed to allocate and initialize plane\n");
> +		return plane;
> +	}
> +
> +	drm_plane_helper_add(&plane->base, &loongson_plane_helper_funcs);
> +
> +	return plane;
> +}
> -- 
> 2.32.0

^ permalink raw reply	[flat|nested] 4+ messages in thread
  • [parent not found: <20210730094148.620768-3-lichenyang@loongson.cn>]
    • end of thread, other threads:[~2021-08-07  9:57 UTC | newest]

Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
     [not found] <20210730094148.620768-1-lichenyang@loongson.cn>
     [not found] ` <20210730094148.620768-2-lichenyang@loongson.cn>
2021-08-01 20:28   ` [PATCH v4 2/3] drm/loongson: Add GPIO and I2C driver for loongson drm Sam Ravnborg
2021-08-07  9:51   ` Sam Ravnborg
2021-08-04 21:12 ` [PATCH v4 1/3] drm/loongson: Add DRM Driver for Loongson 7A1000 bridge chip Sam Ravnborg
     [not found] ` <20210730094148.620768-3-lichenyang@loongson.cn>
2021-08-07  9:56   ` [PATCH v4 3/3] drm/loongson: Add interrupt driver for LS7A Sam Ravnborg

    This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox