* [PATCH v2 0/4] *** SUBJECT HERE ***
@ 2013-05-09 19:34 Christopher Harvey
2013-04-12 20:42 ` [PATCH v2 1/4] drm/mgag200: Don't change unrelated registers during modeset Christopher Harvey
` (3 more replies)
0 siblings, 4 replies; 5+ messages in thread
From: Christopher Harvey @ 2013-05-09 19:34 UTC (permalink / raw)
To: dri-devel; +Cc: Mathieu Larouche
I forgot to include some acked and tested-by lines in v1 of this
series.
No code changes in v2.
thanks,
Christopher Harvey (4):
drm/mgag200: Don't change unrelated registers during modeset
drm/mgag200: Fix writes into MGA1064_PIX_CLK_CTL register
drm/mgag200: Convert counter delays to jiffies
drm/mgag200: Fix framebuffer base address programming
drivers/gpu/drm/mgag200/mgag200_mode.c | 90 ++++++++++++++++++++--------------
1 file changed, 52 insertions(+), 38 deletions(-)
--
1.8.1.5
^ permalink raw reply [flat|nested] 5+ messages in thread* [PATCH v2 1/4] drm/mgag200: Don't change unrelated registers during modeset 2013-05-09 19:34 [PATCH v2 0/4] *** SUBJECT HERE *** Christopher Harvey @ 2013-04-12 20:42 ` Christopher Harvey 2013-04-12 22:24 ` [PATCH v2 2/4] drm/mgag200: Fix writes into MGA1064_PIX_CLK_CTL register Christopher Harvey ` (2 subsequent siblings) 3 siblings, 0 replies; 5+ messages in thread From: Christopher Harvey @ 2013-04-12 20:42 UTC (permalink / raw) To: dri-devel; +Cc: Mathieu Larouche Registers in indices below 0x18 are totally unrelated to modesetting, so don't write 0's, or anything else into them on modeset. Most of these registers are hardware cursor related, so this existing code interferes with hardware cursor development. Signed-off-by: Christopher Harvey <charvey@matrox.com> Tested-by: Julia Lemire <jlemire@matrox.com> Acked-by: Julia Lemire <jlemire@matrox.com> Acked-by: Mathieu Larouche <mathieu.larouche@matrox.com> --- drivers/gpu/drm/mgag200/mgag200_mode.c | 6 +----- 1 file changed, 1 insertion(+), 5 deletions(-) diff --git a/drivers/gpu/drm/mgag200/mgag200_mode.c b/drivers/gpu/drm/mgag200/mgag200_mode.c index f988965..2d9333d 100644 --- a/drivers/gpu/drm/mgag200/mgag200_mode.c +++ b/drivers/gpu/drm/mgag200/mgag200_mode.c @@ -829,11 +829,7 @@ static int mga_crtc_mode_set(struct drm_crtc *crtc, for (i = 0; i < sizeof(dacvalue); i++) { - if ((i <= 0x03) || - (i == 0x07) || - (i == 0x0b) || - (i == 0x0f) || - ((i >= 0x13) && (i <= 0x17)) || + if ((i <= 0x17) || (i == 0x1b) || (i == 0x1c) || ((i >= 0x1f) && (i <= 0x29)) || -- 1.8.1.5 ^ permalink raw reply related [flat|nested] 5+ messages in thread
* [PATCH v2 2/4] drm/mgag200: Fix writes into MGA1064_PIX_CLK_CTL register 2013-05-09 19:34 [PATCH v2 0/4] *** SUBJECT HERE *** Christopher Harvey 2013-04-12 20:42 ` [PATCH v2 1/4] drm/mgag200: Don't change unrelated registers during modeset Christopher Harvey @ 2013-04-12 22:24 ` Christopher Harvey 2013-05-06 15:56 ` [PATCH v2 3/4] drm/mgag200: Convert counter delays to jiffies Christopher Harvey 2013-05-08 19:10 ` [PATCH v2 4/4] drm/mgag200: Fix framebuffer base address programming Christopher Harvey 3 siblings, 0 replies; 5+ messages in thread From: Christopher Harvey @ 2013-04-12 22:24 UTC (permalink / raw) To: dri-devel; +Cc: Mathieu Larouche The original line, WREG_DAC(MGA1064_PIX_CLK_CTL_CLK_DIS, tmp); wrote tmp into MGA1064_PIX_CLK_CTL_CLK_DIS, where MGA1064_PIX_CLK_CTL_CLK_DIS is an offset into MGA1064_PIX_CLK_CTL. Change the line to write properly into MGA1064_PIX_CLK_CTL. There were other chunks of code nearby that use the same pattern (but work correctly), so this patch updates them all to use this new (slightly more efficient) write pattern. The WREG_DAC macro was causing the DAC_INDEX register to be set to the same value twice. WREG8(DAC_DATA, foo) takes advantage of the fact that DAC_INDEX is already at the value we want. Signed-off-by: Christopher Harvey <charvey@matrox.com> Acked-by: Julia Lemire <jlemire@matrox.com> Tested-by: Julia Lemire <jlemire@matrox.com> Acked-by: Mathieu Larouche <mathieu.larouche@matrox.com> --- drivers/gpu/drm/mgag200/mgag200_mode.c | 42 +++++++++++++++++----------------- 1 file changed, 21 insertions(+), 21 deletions(-) diff --git a/drivers/gpu/drm/mgag200/mgag200_mode.c b/drivers/gpu/drm/mgag200/mgag200_mode.c index 2d9333d..6f3b9db 100644 --- a/drivers/gpu/drm/mgag200/mgag200_mode.c +++ b/drivers/gpu/drm/mgag200/mgag200_mode.c @@ -189,12 +189,12 @@ static int mga_g200wb_set_plls(struct mga_device *mdev, long clock) WREG8(DAC_INDEX, MGA1064_PIX_CLK_CTL); tmp = RREG8(DAC_DATA); tmp |= MGA1064_PIX_CLK_CTL_CLK_DIS; - WREG_DAC(MGA1064_PIX_CLK_CTL_CLK_DIS, tmp); + WREG8(DAC_DATA, tmp); WREG8(DAC_INDEX, MGA1064_REMHEADCTL); tmp = RREG8(DAC_DATA); tmp |= MGA1064_REMHEADCTL_CLKDIS; - WREG_DAC(MGA1064_REMHEADCTL, tmp); + WREG8(DAC_DATA, tmp); /* select PLL Set C */ tmp = RREG8(MGAREG_MEM_MISC_READ); @@ -204,7 +204,7 @@ static int mga_g200wb_set_plls(struct mga_device *mdev, long clock) WREG8(DAC_INDEX, MGA1064_PIX_CLK_CTL); tmp = RREG8(DAC_DATA); tmp |= MGA1064_PIX_CLK_CTL_CLK_POW_DOWN | 0x80; - WREG_DAC(MGA1064_PIX_CLK_CTL, tmp); + WREG8(DAC_DATA, tmp); udelay(500); @@ -212,7 +212,7 @@ static int mga_g200wb_set_plls(struct mga_device *mdev, long clock) WREG8(DAC_INDEX, MGA1064_VREF_CTL); tmp = RREG8(DAC_DATA); tmp &= ~0x04; - WREG_DAC(MGA1064_VREF_CTL, tmp); + WREG8(DAC_DATA, tmp); udelay(50); @@ -236,13 +236,13 @@ static int mga_g200wb_set_plls(struct mga_device *mdev, long clock) tmp = RREG8(DAC_DATA); tmp &= ~MGA1064_PIX_CLK_CTL_SEL_MSK; tmp |= MGA1064_PIX_CLK_CTL_SEL_PLL; - WREG_DAC(MGA1064_PIX_CLK_CTL, tmp); + WREG8(DAC_DATA, tmp); WREG8(DAC_INDEX, MGA1064_REMHEADCTL); tmp = RREG8(DAC_DATA); tmp &= ~MGA1064_REMHEADCTL_CLKSL_MSK; tmp |= MGA1064_REMHEADCTL_CLKSL_PLL; - WREG_DAC(MGA1064_REMHEADCTL, tmp); + WREG8(DAC_DATA, tmp); /* reset dotclock rate bit */ WREG8(MGAREG_SEQ_INDEX, 1); @@ -253,7 +253,7 @@ static int mga_g200wb_set_plls(struct mga_device *mdev, long clock) WREG8(DAC_INDEX, MGA1064_PIX_CLK_CTL); tmp = RREG8(DAC_DATA); tmp &= ~MGA1064_PIX_CLK_CTL_CLK_DIS; - WREG_DAC(MGA1064_PIX_CLK_CTL, tmp); + WREG8(DAC_DATA, tmp); vcount = RREG8(MGAREG_VCOUNT); @@ -318,7 +318,7 @@ static int mga_g200ev_set_plls(struct mga_device *mdev, long clock) WREG8(DAC_INDEX, MGA1064_PIX_CLK_CTL); tmp = RREG8(DAC_DATA); tmp |= MGA1064_PIX_CLK_CTL_CLK_DIS; - WREG_DAC(MGA1064_PIX_CLK_CTL_CLK_DIS, tmp); + WREG8(DAC_DATA, tmp); tmp = RREG8(MGAREG_MEM_MISC_READ); tmp |= 0x3 << 2; @@ -326,12 +326,12 @@ static int mga_g200ev_set_plls(struct mga_device *mdev, long clock) WREG8(DAC_INDEX, MGA1064_PIX_PLL_STAT); tmp = RREG8(DAC_DATA); - WREG_DAC(MGA1064_PIX_PLL_STAT, tmp & ~0x40); + WREG8(DAC_DATA, tmp & ~0x40); WREG8(DAC_INDEX, MGA1064_PIX_CLK_CTL); tmp = RREG8(DAC_DATA); tmp |= MGA1064_PIX_CLK_CTL_CLK_POW_DOWN; - WREG_DAC(MGA1064_PIX_CLK_CTL, tmp); + WREG8(DAC_DATA, tmp); WREG_DAC(MGA1064_EV_PIX_PLLC_M, m); WREG_DAC(MGA1064_EV_PIX_PLLC_N, n); @@ -342,7 +342,7 @@ static int mga_g200ev_set_plls(struct mga_device *mdev, long clock) WREG8(DAC_INDEX, MGA1064_PIX_CLK_CTL); tmp = RREG8(DAC_DATA); tmp &= ~MGA1064_PIX_CLK_CTL_CLK_POW_DOWN; - WREG_DAC(MGA1064_PIX_CLK_CTL, tmp); + WREG8(DAC_DATA, tmp); udelay(500); @@ -350,11 +350,11 @@ static int mga_g200ev_set_plls(struct mga_device *mdev, long clock) tmp = RREG8(DAC_DATA); tmp &= ~MGA1064_PIX_CLK_CTL_SEL_MSK; tmp |= MGA1064_PIX_CLK_CTL_SEL_PLL; - WREG_DAC(MGA1064_PIX_CLK_CTL, tmp); + WREG8(DAC_DATA, tmp); WREG8(DAC_INDEX, MGA1064_PIX_PLL_STAT); tmp = RREG8(DAC_DATA); - WREG_DAC(MGA1064_PIX_PLL_STAT, tmp | 0x40); + WREG8(DAC_DATA, tmp | 0x40); tmp = RREG8(MGAREG_MEM_MISC_READ); tmp |= (0x3 << 2); @@ -363,7 +363,7 @@ static int mga_g200ev_set_plls(struct mga_device *mdev, long clock) WREG8(DAC_INDEX, MGA1064_PIX_CLK_CTL); tmp = RREG8(DAC_DATA); tmp &= ~MGA1064_PIX_CLK_CTL_CLK_DIS; - WREG_DAC(MGA1064_PIX_CLK_CTL, tmp); + WREG8(DAC_DATA, tmp); return 0; } @@ -416,7 +416,7 @@ static int mga_g200eh_set_plls(struct mga_device *mdev, long clock) WREG8(DAC_INDEX, MGA1064_PIX_CLK_CTL); tmp = RREG8(DAC_DATA); tmp |= MGA1064_PIX_CLK_CTL_CLK_DIS; - WREG_DAC(MGA1064_PIX_CLK_CTL_CLK_DIS, tmp); + WREG8(DAC_DATA, tmp); tmp = RREG8(MGAREG_MEM_MISC_READ); tmp |= 0x3 << 2; @@ -425,7 +425,7 @@ static int mga_g200eh_set_plls(struct mga_device *mdev, long clock) WREG8(DAC_INDEX, MGA1064_PIX_CLK_CTL); tmp = RREG8(DAC_DATA); tmp |= MGA1064_PIX_CLK_CTL_CLK_POW_DOWN; - WREG_DAC(MGA1064_PIX_CLK_CTL, tmp); + WREG8(DAC_DATA, tmp); udelay(500); @@ -439,13 +439,13 @@ static int mga_g200eh_set_plls(struct mga_device *mdev, long clock) tmp = RREG8(DAC_DATA); tmp &= ~MGA1064_PIX_CLK_CTL_SEL_MSK; tmp |= MGA1064_PIX_CLK_CTL_SEL_PLL; - WREG_DAC(MGA1064_PIX_CLK_CTL, tmp); + WREG8(DAC_DATA, tmp); WREG8(DAC_INDEX, MGA1064_PIX_CLK_CTL); tmp = RREG8(DAC_DATA); tmp &= ~MGA1064_PIX_CLK_CTL_CLK_DIS; tmp &= ~MGA1064_PIX_CLK_CTL_CLK_POW_DOWN; - WREG_DAC(MGA1064_PIX_CLK_CTL, tmp); + WREG8(DAC_DATA, tmp); vcount = RREG8(MGAREG_VCOUNT); @@ -515,12 +515,12 @@ static int mga_g200er_set_plls(struct mga_device *mdev, long clock) WREG8(DAC_INDEX, MGA1064_PIX_CLK_CTL); tmp = RREG8(DAC_DATA); tmp |= MGA1064_PIX_CLK_CTL_CLK_DIS; - WREG_DAC(MGA1064_PIX_CLK_CTL_CLK_DIS, tmp); + WREG8(DAC_DATA, tmp); WREG8(DAC_INDEX, MGA1064_REMHEADCTL); tmp = RREG8(DAC_DATA); tmp |= MGA1064_REMHEADCTL_CLKDIS; - WREG_DAC(MGA1064_REMHEADCTL, tmp); + WREG8(DAC_DATA, tmp); tmp = RREG8(MGAREG_MEM_MISC_READ); tmp |= (0x3<<2) | 0xc0; @@ -530,7 +530,7 @@ static int mga_g200er_set_plls(struct mga_device *mdev, long clock) tmp = RREG8(DAC_DATA); tmp &= ~MGA1064_PIX_CLK_CTL_CLK_DIS; tmp |= MGA1064_PIX_CLK_CTL_CLK_POW_DOWN; - WREG_DAC(MGA1064_PIX_CLK_CTL, tmp); + WREG8(DAC_DATA, tmp); udelay(500); -- 1.8.1.5 ^ permalink raw reply related [flat|nested] 5+ messages in thread
* [PATCH v2 3/4] drm/mgag200: Convert counter delays to jiffies 2013-05-09 19:34 [PATCH v2 0/4] *** SUBJECT HERE *** Christopher Harvey 2013-04-12 20:42 ` [PATCH v2 1/4] drm/mgag200: Don't change unrelated registers during modeset Christopher Harvey 2013-04-12 22:24 ` [PATCH v2 2/4] drm/mgag200: Fix writes into MGA1064_PIX_CLK_CTL register Christopher Harvey @ 2013-05-06 15:56 ` Christopher Harvey 2013-05-08 19:10 ` [PATCH v2 4/4] drm/mgag200: Fix framebuffer base address programming Christopher Harvey 3 siblings, 0 replies; 5+ messages in thread From: Christopher Harvey @ 2013-05-06 15:56 UTC (permalink / raw) To: dri-devel; +Cc: Mathieu Larouche Signed-off-by: Christopher Harvey <charvey@matrox.com> Acked-by: Julia Lemire <jlemire@matrox.com> Tested-by: Julia Lemire <jlemire@matrox.com> Acked-by: Mathieu Larouche <mathieu.larouche@matrox.com> --- drivers/gpu/drm/mgag200/mgag200_mode.c | 15 ++++++--------- 1 file changed, 6 insertions(+), 9 deletions(-) diff --git a/drivers/gpu/drm/mgag200/mgag200_mode.c b/drivers/gpu/drm/mgag200/mgag200_mode.c index 6f3b9db..6dbf6de 100644 --- a/drivers/gpu/drm/mgag200/mgag200_mode.c +++ b/drivers/gpu/drm/mgag200/mgag200_mode.c @@ -46,29 +46,26 @@ static void mga_crtc_load_lut(struct drm_crtc *crtc) static inline void mga_wait_vsync(struct mga_device *mdev) { - unsigned int count = 0; + unsigned long timeout = jiffies + HZ/10; unsigned int status = 0; do { status = RREG32(MGAREG_Status); - count++; - } while ((status & 0x08) && (count < 250000)); - count = 0; + } while ((status & 0x08) && time_before(jiffies, timeout)); + timeout = jiffies + HZ/10; status = 0; do { status = RREG32(MGAREG_Status); - count++; - } while (!(status & 0x08) && (count < 250000)); + } while (!(status & 0x08) && time_before(jiffies, timeout)); } static inline void mga_wait_busy(struct mga_device *mdev) { - unsigned int count = 0; + unsigned long timeout = jiffies + HZ; unsigned int status = 0; do { status = RREG8(MGAREG_Status + 2); - count++; - } while ((status & 0x01) && (count < 500000)); + } while ((status & 0x01) && time_before(jiffies, timeout)); } /* -- 1.8.1.5 ^ permalink raw reply related [flat|nested] 5+ messages in thread
* [PATCH v2 4/4] drm/mgag200: Fix framebuffer base address programming 2013-05-09 19:34 [PATCH v2 0/4] *** SUBJECT HERE *** Christopher Harvey ` (2 preceding siblings ...) 2013-05-06 15:56 ` [PATCH v2 3/4] drm/mgag200: Convert counter delays to jiffies Christopher Harvey @ 2013-05-08 19:10 ` Christopher Harvey 3 siblings, 0 replies; 5+ messages in thread From: Christopher Harvey @ 2013-05-08 19:10 UTC (permalink / raw) To: dri-devel; +Cc: Mathieu Larouche Higher bits of the base address of framebuffers weren't being programmed properly. This caused framebuffers that didn't happen to be allocated at a low enough address to not be displayed properly. Signed-off-by: Christopher Harvey <charvey@matrox.com> Signed-off-by: Mathieu Larouche <mathieu.larouche@matrox.com> Acked-by: Julia Lemire <jlemire@matrox.com> Tested-by: Julia Lemire <jlemire@matrox.com> --- drivers/gpu/drm/mgag200/mgag200_mode.c | 27 ++++++++++++++++++++++++--- 1 file changed, 24 insertions(+), 3 deletions(-) diff --git a/drivers/gpu/drm/mgag200/mgag200_mode.c b/drivers/gpu/drm/mgag200/mgag200_mode.c index 6dbf6de..77b8a45 100644 --- a/drivers/gpu/drm/mgag200/mgag200_mode.c +++ b/drivers/gpu/drm/mgag200/mgag200_mode.c @@ -654,12 +654,26 @@ static void mga_g200wb_commit(struct drm_crtc *crtc) WREG_DAC(MGA1064_GEN_IO_DATA, tmp); } - +/* + This is how the framebuffer base address is stored in g200 cards: + * Assume @offset is the gpu_addr variable of the framebuffer object + * Then addr is the number of _pixels_ (not bytes) from the start of + VRAM to the first pixel we want to display. (divided by 2 for 32bit + framebuffers) + * addr is stored in the CRTCEXT0, CRTCC and CRTCD registers + addr<20> -> CRTCEXT0<6> + addr<19-16> -> CRTCEXT0<3-0> + addr<15-8> -> CRTCC<7-0> + addr<7-0> -> CRTCD<7-0> + CRTCEXT0 has to be programmed last to trigger an update and make the + new addr variable take effect. + */ void mga_set_start_address(struct drm_crtc *crtc, unsigned offset) { struct mga_device *mdev = crtc->dev->dev_private; u32 addr; int count; + u8 crtcext0; while (RREG8(0x1fda) & 0x08); while (!(RREG8(0x1fda) & 0x08)); @@ -667,10 +681,17 @@ void mga_set_start_address(struct drm_crtc *crtc, unsigned offset) count = RREG8(MGAREG_VCOUNT) + 2; while (RREG8(MGAREG_VCOUNT) < count); - addr = offset >> 2; + WREG8(MGAREG_CRTCEXT_INDEX, 0); + crtcext0 = RREG8(MGAREG_CRTCEXT_DATA); + crtcext0 &= 0xB0; + addr = offset / 8; + /* Can't store addresses any higher than that... + but we also don't have more than 16MB of memory, so it should be fine. */ + WARN_ON(addr > 0x1fffff); + crtcext0 |= (!!(addr & (1<<20)))<<6; WREG_CRT(0x0d, (u8)(addr & 0xff)); WREG_CRT(0x0c, (u8)(addr >> 8) & 0xff); - WREG_CRT(0xaf, (u8)(addr >> 16) & 0xf); + WREG_ECRT(0x0, ((u8)(addr >> 16) & 0xf) | crtcext0); } -- 1.8.1.5 ^ permalink raw reply related [flat|nested] 5+ messages in thread
end of thread, other threads:[~2013-05-09 19:34 UTC | newest] Thread overview: 5+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2013-05-09 19:34 [PATCH v2 0/4] *** SUBJECT HERE *** Christopher Harvey 2013-04-12 20:42 ` [PATCH v2 1/4] drm/mgag200: Don't change unrelated registers during modeset Christopher Harvey 2013-04-12 22:24 ` [PATCH v2 2/4] drm/mgag200: Fix writes into MGA1064_PIX_CLK_CTL register Christopher Harvey 2013-05-06 15:56 ` [PATCH v2 3/4] drm/mgag200: Convert counter delays to jiffies Christopher Harvey 2013-05-08 19:10 ` [PATCH v2 4/4] drm/mgag200: Fix framebuffer base address programming Christopher Harvey
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox