[PATCH 0/2] sequencer: leave auto maintenance to the end of a rebase

[PATCH 0/2] sequencer: leave auto maintenance to the end of a rebase

[Thomas Bachem via GitGitGadget]

While looking into the rerere lock race in [1], the "git commit" a rebase
spawns for a resolved pick turned out to be about the only place a rebase
with the merge backend runs auto maintenance, and it runs it against the
rebase itself. Phillip asked for auto maintenance to be kept out of a rebase
altogether [2], and for the merge backend to run it once at the end the way
the apply backend does [3]. Patrick would rather see that discussed on its
own [4], hence this series.

Patch 1 runs auto maintenance where the sequencer finishes a rebase, as the
apply backend does. Patch 2 then passes maintenance.auto=false and gc.auto=0
to the "git commit", "git merge" and exec commands a rebase spawns, so that
a rebase runs it once, at its end. Cherry-pick and revert are left as they
are.

Based on master. Independent of [1], which makes the rerere lock non-fatal:
with both, a rebase neither spawns the gc nor dies on one that something
else spawned.

[1] <pull.2214.git.1788337897490.gitgitgadget@gmail.com>

[2] <ca3b91b6-254c-4b86-adb8-da3217e9f6e7@gmail.com>

[3] <86efb07c-a0ce-49b0-b4eb-7d6b4bbaeccc@gmail.com>

[4] <apkwpKTGaMwTf0Hz@pks.im>

Thomas Bachem (2):
  sequencer: run auto maintenance once a rebase is done
  sequencer: keep auto maintenance out of the commands a rebase spawns

 sequencer.c                | 32 ++++++++++++++++++++++++++++++++
 t/t3418-rebase-continue.sh | 26 ++++++++++++++++++++++++++
 2 files changed, 58 insertions(+)


base-commit: 3cb9185f65410273787f74333cc027d2ea5daada
Published-As: https://github.com/gitgitgadget/git/releases/tag/pr-2217%2Fthomasbachem%2Frebase-auto-maintenance-v1
Fetch-It-Via: git fetch https://github.com/gitgitgadget/git pr-2217/thomasbachem/rebase-auto-maintenance-v1
Pull-Request: https://github.com/gitgitgadget/git/pull/2217
-- 
gitgitgadget

[PATCH 1/2] sequencer: run auto maintenance once a rebase is done

[Thomas Bachem via GitGitGadget]

From: Thomas Bachem <mail@thomasbachem.com>

The apply backend runs "git maintenance run --auto" from
finish_rebase() once it has applied its patches, and so does "git am"
on its own. The merge backend reaches finish_rebase() only on the
paths both backends share in builtin/rebase.c: an abort, a branch
that is already up to date, and a fast-forward. A rebase that
replays commits never runs maintenance at its end. It creates most
of its commits in process, and only the "git commit" it spawns for a
resolved, reworded or squashed pick, the "git merge" a "rebase -r"
spawns for an octopus merge or with a strategy, and whatever an exec
command runs kick maintenance off, in the middle of the rebase. Run
it where the sequencer finishes a rebase, after the autostash is
applied, as finish_rebase() does, so that both backends end a rebase
the same way, and so that the next commit can keep it out of the
commands a rebase spawns. builtin/rebase.c could run it instead once
run_sequencer_rebase() returns, but the sequencer is where the rebase
finishes, and the autostash and the state cleanup that surround the
run in finish_rebase() are there as well. prepare_auto_maintenance()
closes the object database before the spawn, so the sequencer holds
nothing a repack would need to replace.

Assisted-by: Claude Fable 5.1
Signed-off-by: Thomas Bachem <mail@thomasbachem.com>
---
 sequencer.c                | 5 +++++
 t/t3418-rebase-continue.sh | 8 ++++++++
 2 files changed, 13 insertions(+)

diff --git a/sequencer.c b/sequencer.c
index 65afd100d9..f58ad254be 100644
--- a/sequencer.c
+++ b/sequencer.c
@@ -5297,6 +5297,11 @@ cleanup_head_ref:
 			run_hooks_opt(r, "post-rewrite", &hook_opt);
 		}
 		apply_autostash(rebase_path_autostash());
+		/*
+		 * We ignore errors in 'git maintenance run --auto', since the
+		 * user should see them.
+		 */
+		run_auto_maintenance(r, opts->quiet);
 
 		if (!opts->quiet) {
 			if (!opts->verbose)
diff --git a/t/t3418-rebase-continue.sh b/t/t3418-rebase-continue.sh
index cb5c3a1cb5..2c34cf8a01 100755
--- a/t/t3418-rebase-continue.sh
+++ b/t/t3418-rebase-continue.sh
@@ -395,4 +395,12 @@ test_orig_head () {
 test_orig_head --apply
 test_orig_head --merge
 
+test_expect_success 'rebase runs auto maintenance at its end' '
+	git checkout -b one-exec main^ &&
+	test_commit F4 &&
+	test_must_fail git rebase -x false main &&
+	GIT_TRACE2_EVENT="$(pwd)/finish.txt" git rebase --continue &&
+	test_subcommand_flex git maintenance run --auto <finish.txt
+'
+
 test_done
-- 
gitgitgadget

Re: [PATCH 1/2] sequencer: run auto maintenance once a rebase is done

[Phillip Wood]

Hi Thomas

On 04/09/2026 08:53, Thomas Bachem via GitGitGadget wrote:
> From: Thomas Bachem <mail@thomasbachem.com>
> 
> The apply backend runs "git maintenance run --auto" from
> finish_rebase() once it has applied its patches, and so does "git am"
> on its own. The merge backend reaches finish_rebase() only on the
> paths both backends share in builtin/rebase.c: an abort, a branch
> that is already up to date, and a fast-forward. A rebase that
> replays commits never runs maintenance at its end. It creates most
> of its commits in process, and only the "git commit" it spawns for a
> resolved, reworded or squashed pick, the "git merge" a "rebase -r"
> spawns for an octopus merge or with a strategy, and whatever an exec
> command runs kick maintenance off, in the middle of the rebase. Run
> it where the sequencer finishes a rebase, after the autostash is
> applied, as finish_rebase() does, so that both backends end a rebase
> the same way, and so that the next commit can keep it out of the
> commands a rebase spawns. builtin/rebase.c could run it instead once
> run_sequencer_rebase() returns, but the sequencer is where the rebase
> finishes, and the autostash and the state cleanup that surround the
> run in finish_rebase() are there as well. prepare_auto_maintenance()
> closes the object database before the spawn, so the sequencer holds
> nothing a repack would need to replace.

It would be nice if the two backends shared more of the cleanup code, I 
don't think there is a good reason for them not to share the code that 
copies notes, applies the autostash and switches HEAD back to the 
branch, but that is outside the scope of this change. So adding a 
separate call to the sequencer code seems reasonable. I wonder if we 
should do this for cherry-pick and revert as well; certainly cherry-pick 
can create a lot of loose objects and does not necessarily call "git 
commit". If cherry-pick does call "git commit" and trigger background 
maintenance it is susceptible to the same problems as rebase, so we 
should probably treat them the same.

Thanks

Phillip

> 
> Assisted-by: Claude Fable 5.1
> Signed-off-by: Thomas Bachem <mail@thomasbachem.com>
> ---
>   sequencer.c                | 5 +++++
>   t/t3418-rebase-continue.sh | 8 ++++++++
>   2 files changed, 13 insertions(+)
> 
> diff --git a/sequencer.c b/sequencer.c
> index 65afd100d9..f58ad254be 100644
> --- a/sequencer.c
> +++ b/sequencer.c
> @@ -5297,6 +5297,11 @@ cleanup_head_ref:
>   			run_hooks_opt(r, "post-rewrite", &hook_opt);
>   		}
>   		apply_autostash(rebase_path_autostash());
> +		/*
> +		 * We ignore errors in 'git maintenance run --auto', since the
> +		 * user should see them.
> +		 */
> +		run_auto_maintenance(r, opts->quiet);
>   
>   		if (!opts->quiet) {
>   			if (!opts->verbose)
> diff --git a/t/t3418-rebase-continue.sh b/t/t3418-rebase-continue.sh
> index cb5c3a1cb5..2c34cf8a01 100755
> --- a/t/t3418-rebase-continue.sh
> +++ b/t/t3418-rebase-continue.sh
> @@ -395,4 +395,12 @@ test_orig_head () {
>   test_orig_head --apply
>   test_orig_head --merge
>   
> +test_expect_success 'rebase runs auto maintenance at its end' '
> +	git checkout -b one-exec main^ &&
> +	test_commit F4 &&
> +	test_must_fail git rebase -x false main &&
> +	GIT_TRACE2_EVENT="$(pwd)/finish.txt" git rebase --continue &&
> +	test_subcommand_flex git maintenance run --auto <finish.txt
> +'
> +
>   test_done

[PATCH 2/2] sequencer: keep auto maintenance out of the commands a rebase spawns

[Thomas Bachem via GitGitGadget]

From: Thomas Bachem <mail@thomasbachem.com>

The commands a rebase with the merge backend spawns, the "git commit"
for a resolved, reworded or squashed pick, the "git merge" of a
"rebase -r" for an octopus merge or with a strategy, and whatever an
exec command runs, each kick off "git maintenance run --auto --detach",
a background process the rebase then races for the repository: the
"rerere gc" spawned by the commit of one "git rebase --continue" holds
MERGE_RR.lock while the next pick wants it, and a repack wants to
delete packs the sequencer still had open, which 65cda10d5b
(sequencer: release the ODB before spawning git commit, 2026-08-12)
had to fix for Windows.

Nothing a rebase creates is old enough to be pruned by the time it
ends, and repacking what it created can wait until then, so
maintenance in the middle of a rebase has nothing to do that a run at
its end cannot, and a rebase to get in the way of. Pass
maintenance.auto=false and gc.auto=0 to the commands a rebase spawns,
through GIT_CONFIG_PARAMETERS so that the shell of an exec command
passes them on too, appended to whatever -c the user gave, since the
last entry wins. What the user runs while the rebase is stopped, say
"git commit --amend" at an edit, is not the rebase's to control and
still runs it. "git commit" and "git merge" could skip it themselves
while a rebase is in progress, which would cover that too, but that
spreads the rebase's business over every command that runs
maintenance and defers theirs for as long as a rebase is left lying
around, so keep the decision with the rebase, in what it spawns. Both
backends run maintenance once the rebase is done, the merge backend
since the previous commit, so nothing is lost.

Cherry-pick and revert are left alone: they never ran maintenance at
the end of a sequence, and the "git commit" they spawn for a
--continue or an edited message is the only place they run it at all.

Assisted-by: Claude Fable 5.1
Signed-off-by: Thomas Bachem <mail@thomasbachem.com>
---
 sequencer.c                | 27 +++++++++++++++++++++++++++
 t/t3418-rebase-continue.sh | 18 ++++++++++++++++++
 2 files changed, 45 insertions(+)

diff --git a/sequencer.c b/sequencer.c
index f58ad254be..30c1a799cc 100644
--- a/sequencer.c
+++ b/sequencer.c
@@ -1107,6 +1107,29 @@ static int run_command_silent_on_success(struct child_process *cmd)
 	return rc;
 }
 
+/*
+ * A rebase runs auto maintenance once it is done, not from every command
+ * it spawns along the way: their background "rerere gc" or repack would
+ * race the rebase for locks and files it still holds.
+ */
+static void disable_auto_maintenance(struct child_process *cmd)
+{
+	struct strbuf value = STRBUF_INIT;
+	const char *old = getenv(CONFIG_DATA_ENVIRONMENT);
+
+	if (old && *old)
+		strbuf_addf(&value, "%s ", old);
+	sq_quote_buf(&value, "maintenance.auto");
+	strbuf_addch(&value, '=');
+	sq_quote_buf(&value, "false");
+	strbuf_addch(&value, ' ');
+	sq_quote_buf(&value, "gc.auto");
+	strbuf_addch(&value, '=');
+	sq_quote_buf(&value, "0");
+	strvec_pushf(&cmd->env, "%s=%s", CONFIG_DATA_ENVIRONMENT, value.buf);
+	strbuf_release(&value);
+}
+
 /*
  * If we are cherry-pick, and if the merge did not result in
  * hand-editing, we will hit this commit and inherit the original
@@ -1148,6 +1171,8 @@ static int run_git_commit(const char *defmsg,
 			     author_date_from_env(&cmd.env));
 	if (opts->ignore_date)
 		strvec_push(&cmd.env, "GIT_AUTHOR_DATE=");
+	if (is_rebase_i(opts))
+		disable_auto_maintenance(&cmd);
 
 	strvec_push(&cmd.args, "commit");
 
@@ -3934,6 +3959,7 @@ static int do_exec(struct repository *r, const char *command_line, int quiet)
 	cmd.use_shell = 1;
 	strvec_push(&cmd.args, command_line);
 	strvec_push(&cmd.env, "GIT_CHERRY_PICK_HELP");
+	disable_auto_maintenance(&cmd);
 	status = run_command(&cmd);
 
 	/* force re-reading of the cache */
@@ -4342,6 +4368,7 @@ static int do_merge(struct repository *r,
 				     author_date_from_env(&cmd.env));
 		if (opts->ignore_date)
 			strvec_push(&cmd.env, "GIT_AUTHOR_DATE=");
+		disable_auto_maintenance(&cmd);
 
 		cmd.git_cmd = 1;
 		strvec_push(&cmd.args, "merge");
diff --git a/t/t3418-rebase-continue.sh b/t/t3418-rebase-continue.sh
index 2c34cf8a01..cf6d20ce79 100755
--- a/t/t3418-rebase-continue.sh
+++ b/t/t3418-rebase-continue.sh
@@ -403,4 +403,22 @@ test_expect_success 'rebase runs auto maintenance at its end' '
 	test_subcommand_flex git maintenance run --auto <finish.txt
 '
 
+test_expect_success 'rebase spawns no auto maintenance before its end' '
+	git checkout -b two-conflicts topic &&
+	test_commit F2-again F2 222 &&
+	test_must_fail git rebase -x "git commit --allow-empty -m exec" main &&
+	echo resolved >F2 &&
+	git add F2 &&
+	test_must_fail env GIT_TRACE2_EVENT="$(pwd)/mid.txt" \
+		git rebase --continue &&
+	test_subcommand_flex git commit <mid.txt &&
+	test_subcommand_flex ! git maintenance run --auto <mid.txt &&
+	echo resolved >F2 &&
+	git add F2 &&
+	GIT_TRACE2_EVENT="$(pwd)/end.txt" git rebase --continue &&
+	test_subcommand_flex git maintenance run --auto <end.txt &&
+	grep "\"child_start\".*\"maintenance\"" end.txt >maintenance &&
+	test_line_count = 1 maintenance
+'
+
 test_done
-- 
gitgitgadget

Re: [PATCH 2/2] sequencer: keep auto maintenance out of the commands a rebase spawns

[Phillip Wood]

Hi Thomas

On 04/09/2026 08:53, Thomas Bachem via GitGitGadget wrote:
> From: Thomas Bachem <mail@thomasbachem.com>
> 
> The commands a rebase with the merge backend spawns, the "git commit"
> for a resolved, reworded or squashed pick, the "git merge" of a
> "rebase -r" for an octopus merge or with a strategy, and whatever an
> exec command runs, each kick off "git maintenance run --auto --detach",
> a background process the rebase then races for the repository: the
> "rerere gc" spawned by the commit of one "git rebase --continue" holds
> MERGE_RR.lock while the next pick wants it, and a repack wants to
> delete packs the sequencer still had open, which 65cda10d5b
> (sequencer: release the ODB before spawning git commit, 2026-08-12)
> had to fix for Windows.

This entire paragraph is a single sentence and is very hard to understand.
> Nothing a rebase creates is old enough to be pruned by the time it

s/Nothing/The objects/?

> ends, and repacking what it created can wait until then,

That's what we'll find out when this is merged. In principle it is 
possible someone is doing enormous rebases where the number of loose 
objects impacts the performance if we don't repack mid-rebase but I 
don't think we can know that without disabling auto maintenance and 
seeing if anyone complians.

> so
> maintenance in the middle of a rebase has nothing to do that a run at
> its end cannot, and a rebase to get in the way of.

That last clause is hard to parse.

> Pass
> maintenance.auto=false and gc.auto=0 to the commands a rebase spawns,
> through GIT_CONFIG_PARAMETERS so that the shell of an exec command
> passes them on too, appended to whatever -c the user gave, since the
> last entry wins. What the user runs while the rebase is stopped, say
> "git commit --amend" at an edit, is not the rebase's to control and
> still runs it. 

s/runs/run/

> "git commit" and "git merge" could skip it themselves
> while a rebase is in progress, which would cover that too, but that
> spreads the rebase's business over every command that runs
> maintenance and defers theirs for as long as a rebase is left lying
> around, so keep the decision with the rebase, in what it spawns. Both
> backends run maintenance once the rebase is done, the merge backend
> since the previous commit, so nothing is lost.
> 
> Cherry-pick and revert are left alone: they never ran maintenance at
> the end of a sequence, and the "git commit" they spawn for a
> --continue or an edited message is the only place they run it at all.

I'm inclined to think that the reasoning for running maintenance at the 
end of a rebase applies to cherry-pick and probably revert as well.

> 
> Assisted-by: Claude Fable 5.1
> Signed-off-by: Thomas Bachem <mail@thomasbachem.com>
> ---
>   sequencer.c                | 27 +++++++++++++++++++++++++++
>   t/t3418-rebase-continue.sh | 18 ++++++++++++++++++
>   2 files changed, 45 insertions(+)
> 
> diff --git a/sequencer.c b/sequencer.c
> index f58ad254be..30c1a799cc 100644
> --- a/sequencer.c
> +++ b/sequencer.c
> @@ -1107,6 +1107,29 @@ static int run_command_silent_on_success(struct child_process *cmd)
>   	return rc;
>   }
>   
> +/*
> + * A rebase runs auto maintenance once it is done, not from every command
> + * it spawns along the way: their background "rerere gc" or repack would
> + * race the rebase for locks and files it still holds.
> + */
> +static void disable_auto_maintenance(struct child_process *cmd)
> +{
> +	struct strbuf value = STRBUF_INIT;
> +	const char *old = getenv(CONFIG_DATA_ENVIRONMENT);
> +
> +	if (old && *old)
> +		strbuf_addf(&value, "%s ", old);
> +	sq_quote_buf(&value, "maintenance.auto");
> +	strbuf_addch(&value, '=');
> +	sq_quote_buf(&value, "false");
> +	strbuf_addch(&value, ' ');
> +	sq_quote_buf(&value, "gc.auto");
> +	strbuf_addch(&value, '=');
> +	sq_quote_buf(&value, "0");
> +	strvec_pushf(&cmd->env, "%s=%s", CONFIG_DATA_ENVIRONMENT, value.buf);
> +	strbuf_release(&value);
> +}

We already have a function in config.c to append parameters, but it sets 
them in the callers environment which we don't want to do here. I wonder 
if we could factor out a helper append the parameters to an strbuf 
passed by the caller so we don't need to know about the quoting scheme 
here. Also it would be nice to cache this in replay_ctx so we don't have 
to construct the string each time we want to disable auto maintenance.

Other than that this looks good

Thanks

Phillip


> +
>   /*
>    * If we are cherry-pick, and if the merge did not result in
>    * hand-editing, we will hit this commit and inherit the original
> @@ -1148,6 +1171,8 @@ static int run_git_commit(const char *defmsg,
>   			     author_date_from_env(&cmd.env));
>   	if (opts->ignore_date)
>   		strvec_push(&cmd.env, "GIT_AUTHOR_DATE=");
> +	if (is_rebase_i(opts))
> +		disable_auto_maintenance(&cmd);
>   
>   	strvec_push(&cmd.args, "commit");
>   
> @@ -3934,6 +3959,7 @@ static int do_exec(struct repository *r, const char *command_line, int quiet)
>   	cmd.use_shell = 1;
>   	strvec_push(&cmd.args, command_line);
>   	strvec_push(&cmd.env, "GIT_CHERRY_PICK_HELP");
> +	disable_auto_maintenance(&cmd);
>   	status = run_command(&cmd);
>   
>   	/* force re-reading of the cache */
> @@ -4342,6 +4368,7 @@ static int do_merge(struct repository *r,
>   				     author_date_from_env(&cmd.env));
>   		if (opts->ignore_date)
>   			strvec_push(&cmd.env, "GIT_AUTHOR_DATE=");
> +		disable_auto_maintenance(&cmd);
>   
>   		cmd.git_cmd = 1;
>   		strvec_push(&cmd.args, "merge");
> diff --git a/t/t3418-rebase-continue.sh b/t/t3418-rebase-continue.sh
> index 2c34cf8a01..cf6d20ce79 100755
> --- a/t/t3418-rebase-continue.sh
> +++ b/t/t3418-rebase-continue.sh
> @@ -403,4 +403,22 @@ test_expect_success 'rebase runs auto maintenance at its end' '
>   	test_subcommand_flex git maintenance run --auto <finish.txt
>   '
>   
> +test_expect_success 'rebase spawns no auto maintenance before its end' '
> +	git checkout -b two-conflicts topic &&
> +	test_commit F2-again F2 222 &&
> +	test_must_fail git rebase -x "git commit --allow-empty -m exec" main &&
> +	echo resolved >F2 &&
> +	git add F2 &&
> +	test_must_fail env GIT_TRACE2_EVENT="$(pwd)/mid.txt" \
> +		git rebase --continue &&
> +	test_subcommand_flex git commit <mid.txt &&
> +	test_subcommand_flex ! git maintenance run --auto <mid.txt &&
> +	echo resolved >F2 &&
> +	git add F2 &&
> +	GIT_TRACE2_EVENT="$(pwd)/end.txt" git rebase --continue &&
> +	test_subcommand_flex git maintenance run --auto <end.txt &&
> +	grep "\"child_start\".*\"maintenance\"" end.txt >maintenance &&
> +	test_line_count = 1 maintenance
> +'
> +
>   test_done

Re: [PATCH 2/2] sequencer: keep auto maintenance out of the commands a rebase spawns

[Thomas Bachem]

Hi Phillip,

On 04/09/2026 16:03, Phillip Wood wrote:
> That's what we'll find out when this is merged.

Agreed, and the message now says so instead of claiming it.

> I'm inclined to think that the reasoning for running maintenance at the
> end of a rebase applies to cherry-pick and probably revert as well.

Agreed. In v2 all three end with one run where the sequencer finishes,
and none of the commands they spawn run it, the "git commit" of a
"cherry-pick --continue" included.

> I wonder if we could factor out a helper append the parameters to an
> strbuf passed by the caller so we don't need to know about the quoting
> scheme here. Also it would be nice to cache this in replay_ctx so we
> don't have to construct the string each time we want to disable auto
> maintenance.

Done, as a small config.c patch in front of the two, and a strbuf in
replay_ctx built on first use.

The messages are rewritten from scratch and much shorter, the sentence
you could not parse included.

Thanks,
Thomas

[PATCH v2 0/3] sequencer: leave auto maintenance to the end of a sequence

[Thomas Bachem via GitGitGadget]

Changes since v1:

 * Cherry-pick and revert end their sequences with auto maintenance too, and
   keep it out of the "git commit" they spawn, so the three commands now
   behave the same (Phillip).
 * The GIT_CONFIG_PARAMETERS value comes from a helper split out of
   git_config_push_split_parameter() in config.c (new patch 1), built once
   per run and kept in replay_ctx (Phillip).
 * Commit messages rewritten, much shorter (Junio, Phillip).

Based on master. Independent of the rerere lock fix in [1].

[1] <pull.2214.v2.git.1788507876543.gitgitgadget@gmail.com>

Thomas Bachem (3):
  config: add git_config_append_parameter()
  sequencer: run auto maintenance once a sequence is done
  sequencer: keep auto maintenance out of the commands a sequence spawns

 config.c                        | 20 ++++++++----
 config.h                        | 10 ++++++
 sequencer.c                     | 57 +++++++++++++++++++++++++++++----
 t/t3418-rebase-continue.sh      | 26 +++++++++++++++
 t/t3510-cherry-pick-sequence.sh | 27 ++++++++++++++++
 5 files changed, 127 insertions(+), 13 deletions(-)


base-commit: 3cb9185f65410273787f74333cc027d2ea5daada
Published-As: https://github.com/gitgitgadget/git/releases/tag/pr-2217%2Fthomasbachem%2Frebase-auto-maintenance-v2
Fetch-It-Via: git fetch https://github.com/gitgitgadget/git pr-2217/thomasbachem/rebase-auto-maintenance-v2
Pull-Request: https://github.com/gitgitgadget/git/pull/2217

Range-diff vs v1:

 -:  ---------- > 1:  ef8087e80d config: add git_config_append_parameter()
 1:  3415a4dcbf ! 2:  baab8d4876 sequencer: run auto maintenance once a rebase is done
     @@ Metadata
      Author: Thomas Bachem <mail@thomasbachem.com>
      
       ## Commit message ##
     -    sequencer: run auto maintenance once a rebase is done
     +    sequencer: run auto maintenance once a sequence is done
      
     -    The apply backend runs "git maintenance run --auto" from
     -    finish_rebase() once it has applied its patches, and so does "git am"
     -    on its own. The merge backend reaches finish_rebase() only on the
     -    paths both backends share in builtin/rebase.c: an abort, a branch
     -    that is already up to date, and a fast-forward. A rebase that
     -    replays commits never runs maintenance at its end. It creates most
     -    of its commits in process, and only the "git commit" it spawns for a
     -    resolved, reworded or squashed pick, the "git merge" a "rebase -r"
     -    spawns for an octopus merge or with a strategy, and whatever an exec
     -    command runs kick maintenance off, in the middle of the rebase. Run
     -    it where the sequencer finishes a rebase, after the autostash is
     -    applied, as finish_rebase() does, so that both backends end a rebase
     -    the same way, and so that the next commit can keep it out of the
     -    commands a rebase spawns. builtin/rebase.c could run it instead once
     -    run_sequencer_rebase() returns, but the sequencer is where the rebase
     -    finishes, and the autostash and the state cleanup that surround the
     -    run in finish_rebase() are there as well. prepare_auto_maintenance()
     -    closes the object database before the spawn, so the sequencer holds
     -    nothing a repack would need to replace.
     +    The apply backend of "git rebase" runs "git maintenance run --auto"
     +    from finish_rebase() once it has applied its patches. The merge
     +    backend, "git cherry-pick" and "git revert" do not run it when they
     +    finish. They create their commits in process, and only the "git
     +    commit" they spawn for an edited message or a resolved conflict, the
     +    "git merge" a "rebase -r" spawns and an exec command start it, in the
     +    middle of the sequence.
     +
     +    Run it where the sequencer finishes, so that every sequence ends the
     +    way the apply backend does, and so that the next commit can keep it
     +    out of the commands a sequence spawns.
      
          Assisted-by: Claude Fable 5.1
          Signed-off-by: Thomas Bachem <mail@thomasbachem.com>
      
       ## sequencer.c ##
      @@ sequencer.c: cleanup_head_ref:
     - 			run_hooks_opt(r, "post-rewrite", &hook_opt);
     + 			return -1;
     + 	}
     + 
     ++	/*
     ++	 * We ignore errors in 'git maintenance run --auto', since the
     ++	 * user should see them.
     ++	 */
     ++	run_auto_maintenance(r, opts->quiet);
     ++
     + 	/*
     + 	 * Sequence of picks finished successfully; cleanup by
     + 	 * removing the .git/sequencer directory
     +@@ sequencer.c: int sequencer_continue(struct repository *r, struct replay_opts *opts)
     + 			res = -1;
     + 			goto release_todo_list;
       		}
     - 		apply_autostash(rebase_path_autostash());
     -+		/*
     -+		 * We ignore errors in 'git maintenance run --auto', since the
     -+		 * user should see them.
     -+		 */
     -+		run_auto_maintenance(r, opts->quiet);
     +-	} else if (!file_exists(get_todo_path(opts)))
     +-		return continue_single_pick(r, opts);
     +-	else if ((res = read_populate_todo(r, &todo_list, opts)))
     ++	} else if (!file_exists(get_todo_path(opts))) {
     ++		res = continue_single_pick(r, opts);
     ++		if (!res)
     ++			run_auto_maintenance(r, opts->quiet);
     ++		return res;
     ++	} else if ((res = read_populate_todo(r, &todo_list, opts))) {
     + 		goto release_todo_list;
     ++	}
     + 
     + 	if (!is_rebase_i(opts)) {
     + 		/* Verify that the conflict has been resolved */
     +@@ sequencer.c: int sequencer_pick_revisions(struct repository *r,
     + 			BUG("unexpected extra commit from walk");
     + 
     + 		res = single_pick(r, cmit, opts);
     ++		if (!res)
     ++			run_auto_maintenance(r, opts->quiet);
     + 		goto out;
     + 	}
       
     - 		if (!opts->quiet) {
     - 			if (!opts->verbose)
      
       ## t/t3418-rebase-continue.sh ##
      @@ t/t3418-rebase-continue.sh: test_orig_head () {
     @@ t/t3418-rebase-continue.sh: test_orig_head () {
      +'
      +
       test_done
     +
     + ## t/t3510-cherry-pick-sequence.sh ##
     +@@ t/t3510-cherry-pick-sequence.sh: test_expect_success 'commit descriptions in insn sheet are optional' '
     + 	test_line_count = 4 commits
     + '
     + 
     ++test_expect_success 'cherry-pick runs auto maintenance once it is done' '
     ++	pristine_detach base &&
     ++	GIT_TRACE2_EVENT="$(pwd)/single.txt" git cherry-pick picked &&
     ++	test_subcommand_flex git maintenance run --auto <single.txt &&
     ++	GIT_TRACE2_EVENT="$(pwd)/sequence.txt" \
     ++		git cherry-pick anotherpick yetanotherpick &&
     ++	grep "\"child_start\".*\"maintenance\"" sequence.txt >maintenance &&
     ++	test_line_count = 1 maintenance
     ++'
     ++
     + test_done
 2:  06d2f0f484 ! 3:  9a6fc0427a sequencer: keep auto maintenance out of the commands a rebase spawns
     @@ Metadata
      Author: Thomas Bachem <mail@thomasbachem.com>
      
       ## Commit message ##
     -    sequencer: keep auto maintenance out of the commands a rebase spawns
     +    sequencer: keep auto maintenance out of the commands a sequence spawns
      
     -    The commands a rebase with the merge backend spawns, the "git commit"
     -    for a resolved, reworded or squashed pick, the "git merge" of a
     -    "rebase -r" for an octopus merge or with a strategy, and whatever an
     -    exec command runs, each kick off "git maintenance run --auto --detach",
     -    a background process the rebase then races for the repository: the
     -    "rerere gc" spawned by the commit of one "git rebase --continue" holds
     -    MERGE_RR.lock while the next pick wants it, and a repack wants to
     -    delete packs the sequencer still had open, which 65cda10d5b
     +    The "git commit" and "git merge" the sequencer spawns, and the git
     +    commands an exec runs, each start "git maintenance run --auto
     +    --detach", which then works in the background against the sequence
     +    itself. A "rerere gc" started by the commit of one "git rebase
     +    --continue" holds MERGE_RR.lock when the next pick needs it, and a
     +    repack deletes packs the sequencer still has open, which 65cda10d5b
          (sequencer: release the ODB before spawning git commit, 2026-08-12)
     -    had to fix for Windows.
     +    had to work around.
      
     -    Nothing a rebase creates is old enough to be pruned by the time it
     -    ends, and repacking what it created can wait until then, so
     -    maintenance in the middle of a rebase has nothing to do that a run at
     -    its end cannot, and a rebase to get in the way of. Pass
     -    maintenance.auto=false and gc.auto=0 to the commands a rebase spawns,
     -    through GIT_CONFIG_PARAMETERS so that the shell of an exec command
     -    passes them on too, appended to whatever -c the user gave, since the
     -    last entry wins. What the user runs while the rebase is stopped, say
     -    "git commit --amend" at an edit, is not the rebase's to control and
     -    still runs it. "git commit" and "git merge" could skip it themselves
     -    while a rebase is in progress, which would cover that too, but that
     -    spreads the rebase's business over every command that runs
     -    maintenance and defers theirs for as long as a rebase is left lying
     -    around, so keep the decision with the rebase, in what it spawns. Both
     -    backends run maintenance once the rebase is done, the merge backend
     -    since the previous commit, so nothing is lost.
     -
     -    Cherry-pick and revert are left alone: they never ran maintenance at
     -    the end of a sequence, and the "git commit" they spawn for a
     -    --continue or an edited message is the only place they run it at all.
     +    The loose objects a sequence creates wait for the run at its end that
     +    the previous commit added. Whether a sequence can be long enough to
     +    suffer from them before that remains to be seen. Pass
     +    maintenance.auto=false and gc.auto=0 to the spawned commands through
     +    GIT_CONFIG_PARAMETERS, which the shell of an exec command hands on to
     +    whatever it runs, appended after the user's own -c settings so that
     +    ours win, and built once per run. A command the user runs while the
     +    sequence is stopped, like "git commit --amend" at an edit, is not the
     +    sequencer's to control and still runs maintenance.
      
          Assisted-by: Claude Fable 5.1
          Signed-off-by: Thomas Bachem <mail@thomasbachem.com>
      
       ## sequencer.c ##
     +@@ sequencer.c: struct replay_ctx {
     + 	 * Whether message contains a commit message.
     + 	 */
     + 	unsigned have_message :1;
     ++	/*
     ++	 * The GIT_CONFIG_PARAMETERS value that keeps auto maintenance out
     ++	 * of the commands we spawn, built on first use.
     ++	 */
     ++	struct strbuf config_parameters;
     + };
     + 
     + struct replay_ctx* replay_ctx_new(void)
     +@@ sequencer.c: struct replay_ctx* replay_ctx_new(void)
     + 
     + 	strbuf_init(&ctx->current_fixups, 0);
     + 	strbuf_init(&ctx->message, 0);
     ++	strbuf_init(&ctx->config_parameters, 0);
     + 
     + 	return ctx;
     + }
     +@@ sequencer.c: static void replay_ctx_release(struct replay_ctx *ctx)
     + {
     + 	strbuf_release(&ctx->current_fixups);
     + 	strbuf_release(&ctx->message);
     ++	strbuf_release(&ctx->config_parameters);
     + }
     + 
     + void replay_opts_release(struct replay_opts *opts)
      @@ sequencer.c: static int run_command_silent_on_success(struct child_process *cmd)
       	return rc;
       }
       
      +/*
     -+ * A rebase runs auto maintenance once it is done, not from every command
     ++ * A sequence runs auto maintenance once it is done, not from every command
      + * it spawns along the way: their background "rerere gc" or repack would
     -+ * race the rebase for locks and files it still holds.
     ++ * race the sequencer for locks and files it still holds.
      + */
     -+static void disable_auto_maintenance(struct child_process *cmd)
     ++static void disable_auto_maintenance(struct replay_opts *opts,
     ++				     struct child_process *cmd)
      +{
     -+	struct strbuf value = STRBUF_INIT;
     -+	const char *old = getenv(CONFIG_DATA_ENVIRONMENT);
     ++	struct strbuf *params = &opts->ctx->config_parameters;
      +
     -+	if (old && *old)
     -+		strbuf_addf(&value, "%s ", old);
     -+	sq_quote_buf(&value, "maintenance.auto");
     -+	strbuf_addch(&value, '=');
     -+	sq_quote_buf(&value, "false");
     -+	strbuf_addch(&value, ' ');
     -+	sq_quote_buf(&value, "gc.auto");
     -+	strbuf_addch(&value, '=');
     -+	sq_quote_buf(&value, "0");
     -+	strvec_pushf(&cmd->env, "%s=%s", CONFIG_DATA_ENVIRONMENT, value.buf);
     -+	strbuf_release(&value);
     ++	if (!params->len) {
     ++		const char *old = getenv(CONFIG_DATA_ENVIRONMENT);
     ++
     ++		if (old && *old)
     ++			strbuf_addstr(params, old);
     ++		git_config_append_parameter(params, "maintenance.auto", "false");
     ++		git_config_append_parameter(params, "gc.auto", "0");
     ++	}
     ++	strvec_pushf(&cmd->env, "%s=%s", CONFIG_DATA_ENVIRONMENT, params->buf);
      +}
      +
       /*
     @@ sequencer.c: static int run_git_commit(const char *defmsg,
       			     author_date_from_env(&cmd.env));
       	if (opts->ignore_date)
       		strvec_push(&cmd.env, "GIT_AUTHOR_DATE=");
     -+	if (is_rebase_i(opts))
     -+		disable_auto_maintenance(&cmd);
     ++	disable_auto_maintenance(opts, &cmd);
       
       	strvec_push(&cmd.args, "commit");
       
     -@@ sequencer.c: static int do_exec(struct repository *r, const char *command_line, int quiet)
     +@@ sequencer.c: static int error_failed_squash(struct repository *r,
     + 	return error_with_patch(r, commit, subject, subject_len, opts, 1, 1);
     + }
     + 
     +-static int do_exec(struct repository *r, const char *command_line, int quiet)
     ++static int do_exec(struct repository *r, const char *command_line,
     ++		   struct replay_opts *opts)
     + {
     + 	struct child_process cmd = CHILD_PROCESS_INIT;
     + 	int dirty, status;
     + 
     +-	if (!quiet)
     ++	if (!opts->quiet)
     + 		fprintf(stderr, _("Executing: %s\n"), command_line);
       	cmd.use_shell = 1;
       	strvec_push(&cmd.args, command_line);
       	strvec_push(&cmd.env, "GIT_CHERRY_PICK_HELP");
     -+	disable_auto_maintenance(&cmd);
     ++	disable_auto_maintenance(opts, &cmd);
       	status = run_command(&cmd);
       
       	/* force re-reading of the cache */
     @@ sequencer.c: static int do_merge(struct repository *r,
       				     author_date_from_env(&cmd.env));
       		if (opts->ignore_date)
       			strvec_push(&cmd.env, "GIT_AUTHOR_DATE=");
     -+		disable_auto_maintenance(&cmd);
     ++		disable_auto_maintenance(opts, &cmd);
       
       		cmd.git_cmd = 1;
       		strvec_push(&cmd.args, "merge");
     +@@ sequencer.c: static int pick_commits(struct repository *r,
     + 			if (!opts->verbose)
     + 				term_clear_line();
     + 			*end_of_arg = '\0';
     +-			res = do_exec(r, arg, opts->quiet);
     ++			res = do_exec(r, arg, opts);
     + 			*end_of_arg = saved;
     + 
     + 			if (res) {
     +@@ sequencer.c: static int continue_single_pick(struct repository *r, struct replay_opts *opts)
     + 		return error(_("no cherry-pick or revert in progress"));
     + 
     + 	cmd.git_cmd = 1;
     ++	disable_auto_maintenance(opts, &cmd);
     + 	strvec_push(&cmd.args, "commit");
     + 
     + 	/*
      
       ## t/t3418-rebase-continue.sh ##
      @@ t/t3418-rebase-continue.sh: test_expect_success 'rebase runs auto maintenance at its end' '
     @@ t/t3418-rebase-continue.sh: test_expect_success 'rebase runs auto maintenance at
      +'
      +
       test_done
     +
     + ## t/t3510-cherry-pick-sequence.sh ##
     +@@ t/t3510-cherry-pick-sequence.sh: test_expect_success 'cherry-pick runs auto maintenance once it is done' '
     + 	test_line_count = 1 maintenance
     + '
     + 
     ++test_expect_success 'cherry-pick spawns no auto maintenance before it is done' '
     ++	pristine_detach initial &&
     ++	test_must_fail git cherry-pick base..anotherpick &&
     ++	echo resolved >foo &&
     ++	git add foo &&
     ++	test_must_fail env GIT_TRACE2_EVENT="$(pwd)/mid.txt" \
     ++		git cherry-pick --continue &&
     ++	test_subcommand_flex git commit <mid.txt &&
     ++	test_subcommand_flex ! git maintenance run --auto <mid.txt &&
     ++	echo d >foo &&
     ++	git add foo &&
     ++	GIT_TRACE2_EVENT="$(pwd)/end.txt" git cherry-pick --continue &&
     ++	test_subcommand_flex git commit <end.txt &&
     ++	grep "\"child_start\".*\"maintenance\"" end.txt >maintenance &&
     ++	test_line_count = 1 maintenance
     ++'
     ++
     + test_done

-- 
gitgitgadget

[PATCH v2 1/3] config: add git_config_append_parameter()

[Thomas Bachem via GitGitGadget]

From: Thomas Bachem <mail@thomasbachem.com>

Split the part of git_config_push_split_parameter() that formats one
GIT_CONFIG_PARAMETERS entry into a helper that appends it to a strbuf,
so that a caller can build a value for a child's environment without
knowing the quoting. The sequencer is about to do that.

Assisted-by: Claude Fable 5.1
Signed-off-by: Thomas Bachem <mail@thomasbachem.com>
---
 config.c | 20 +++++++++++++-------
 config.h | 10 ++++++++++
 2 files changed, 23 insertions(+), 7 deletions(-)

diff --git a/config.c b/config.c
index d9019e7e6c..e0bb29b53d 100644
--- a/config.c
+++ b/config.c
@@ -450,18 +450,24 @@ static int git_config_include(const char *var, const char *value,
 	return ret;
 }
 
+void git_config_append_parameter(struct strbuf *env, const char *key,
+				 const char *value)
+{
+	if (env->len)
+		strbuf_addch(env, ' ');
+	sq_quote_buf(env, key);
+	strbuf_addch(env, '=');
+	if (value)
+		sq_quote_buf(env, value);
+}
+
 static void git_config_push_split_parameter(const char *key, const char *value)
 {
 	struct strbuf env = STRBUF_INIT;
 	const char *old = getenv(CONFIG_DATA_ENVIRONMENT);
-	if (old && *old) {
+	if (old && *old)
 		strbuf_addstr(&env, old);
-		strbuf_addch(&env, ' ');
-	}
-	sq_quote_buf(&env, key);
-	strbuf_addch(&env, '=');
-	if (value)
-		sq_quote_buf(&env, value);
+	git_config_append_parameter(&env, key, value);
 	setenv(CONFIG_DATA_ENVIRONMENT, env.buf, 1);
 	strbuf_release(&env);
 }
diff --git a/config.h b/config.h
index b66dd08007..fcf48f6245 100644
--- a/config.h
+++ b/config.h
@@ -22,6 +22,7 @@
  */
 
 struct object_id;
+struct strbuf;
 
 /* git_config_parse_key() returns these negated: */
 #define CONFIG_INVALID_KEY 1
@@ -186,6 +187,15 @@ int git_config_from_blob_oid(config_fn_t fn, const char *name,
 			     enum config_scope scope);
 void git_config_push_parameter(const char *text);
 void git_config_push_env(const char *spec);
+
+/*
+ * Append `key=value` to the GIT_CONFIG_PARAMETERS value in `env`, quoted
+ * the way git_config_from_parameters() reads it, so that a child can be
+ * given configuration on top of what this process was given. A NULL
+ * `value` appends a boolean entry.
+ */
+void git_config_append_parameter(struct strbuf *env, const char *key,
+				 const char *value);
 int git_config_from_parameters(config_fn_t fn, void *data);
 
 /*
-- 
gitgitgadget

Re: [PATCH v2 1/3] config: add git_config_append_parameter()

[Patrick Steinhardt]

On Fri, Sep 04, 2026 at 03:51:24PM +0000, Thomas Bachem via GitGitGadget wrote:
> From: Thomas Bachem <mail@thomasbachem.com>
> 
> Split the part of git_config_push_split_parameter() that formats one
> GIT_CONFIG_PARAMETERS entry into a helper that appends it to a strbuf,
> so that a caller can build a value for a child's environment without
> knowing the quoting. The sequencer is about to do that.

Readers who don't have any context around GIT_CONFIG_PARAMETERS and what
it does will have a bit of a hard time making much sense of this, I
think. It usually helps to give a sentence or two explaining what the
infra even does, and what this quoting looks like.

> Assisted-by: Claude Fable 5.1
> Signed-off-by: Thomas Bachem <mail@thomasbachem.com>
> ---
>  config.c | 20 +++++++++++++-------
>  config.h | 10 ++++++++++
>  2 files changed, 23 insertions(+), 7 deletions(-)
> 
> diff --git a/config.c b/config.c
> index d9019e7e6c..e0bb29b53d 100644
> --- a/config.c
> +++ b/config.c
> @@ -450,18 +450,24 @@ static int git_config_include(const char *var, const char *value,
>  	return ret;
>  }
>  
> +void git_config_append_parameter(struct strbuf *env, const char *key,

Nit: callling this `env` assumes a bit too much about what this buffer
is going to be used for. I'd have called it just `buf`.

> diff --git a/config.h b/config.h
> index b66dd08007..fcf48f6245 100644
> --- a/config.h
> +++ b/config.h
> @@ -22,6 +22,7 @@
>   */
>  
>  struct object_id;
> +struct strbuf;
>  
>  /* git_config_parse_key() returns these negated: */
>  #define CONFIG_INVALID_KEY 1
> @@ -186,6 +187,15 @@ int git_config_from_blob_oid(config_fn_t fn, const char *name,
>  			     enum config_scope scope);
>  void git_config_push_parameter(const char *text);
>  void git_config_push_env(const char *spec);
> +
> +/*
> + * Append `key=value` to the GIT_CONFIG_PARAMETERS value in `env`, quoted
> + * the way git_config_from_parameters() reads it, so that a child can be
> + * given configuration on top of what this process was given. A NULL
> + * `value` appends a boolean entry.
> + */
> +void git_config_append_parameter(struct strbuf *env, const char *key,
> +				 const char *value);

Pointing to that other function makes sense, but neither of the
functions documents the actual format that's used.

Patrick

Re: [PATCH v2 1/3] config: add git_config_append_parameter()

[Phillip Wood]

On 07/09/2026 09:14, Patrick Steinhardt wrote:
> On Fri, Sep 04, 2026 at 03:51:24PM +0000, Thomas Bachem via GitGitGadget wrote:
>> From: Thomas Bachem <mail@thomasbachem.com>
>>
>> diff --git a/config.c b/config.c
>> index d9019e7e6c..e0bb29b53d 100644
>> --- a/config.c
>> +++ b/config.c
>> @@ -450,18 +450,24 @@ static int git_config_include(const char *var, const char *value,
>>   	return ret;
>>   }
>>   
>> +void git_config_append_parameter(struct strbuf *env, const char *key,
> 
> Nit: callling this `env` assumes a bit too much about what this buffer
> is going to be used for. I'd have called it just `buf`.

Are we ever likely to use this outside of GIT_CONFIG_PARAMETERS? If not 
then I think env is a good name because it hints at where this function 
is used. Isn't the whole point of this function to allow us to append 
settings an environment variable?

Thanks

Phillip

Re: [PATCH v2 1/3] config: add git_config_append_parameter()

[Patrick Steinhardt]

On Mon, Sep 07, 2026 at 02:24:34PM +0100, Phillip Wood wrote:
> On 07/09/2026 09:14, Patrick Steinhardt wrote:
> > On Fri, Sep 04, 2026 at 03:51:24PM +0000, Thomas Bachem via GitGitGadget wrote:
> > > From: Thomas Bachem <mail@thomasbachem.com>
> > > 
> > > diff --git a/config.c b/config.c
> > > index d9019e7e6c..e0bb29b53d 100644
> > > --- a/config.c
> > > +++ b/config.c
> > > @@ -450,18 +450,24 @@ static int git_config_include(const char *var, const char *value,
> > >   	return ret;
> > >   }
> > > +void git_config_append_parameter(struct strbuf *env, const char *key,
> > 
> > Nit: callling this `env` assumes a bit too much about what this buffer
> > is going to be used for. I'd have called it just `buf`.
> 
> Are we ever likely to use this outside of GIT_CONFIG_PARAMETERS? If not then
> I think env is a good name because it hints at where this function is used.
> Isn't the whole point of this function to allow us to append settings an
> environment variable?

Potentially, even though this function doesn't really require that at
all. So it may or may not be used outside this current use case.

Anway, as I've said it's only a nit, so I won't insist on a change here.

Patrick

Re: [PATCH v2 1/3] config: add git_config_append_parameter()

[Thomas Bachem]

Hi Patrick,

On 07/09/2026 10:14, Patrick Steinhardt wrote:
> Readers who don't have any context around GIT_CONFIG_PARAMETERS and what
> it does will have a bit of a hard time making much sense of this, I
> think. It usually helps to give a sentence or two explaining what the
> infra even does, and what this quoting looks like.

Will do. It is how "git -c key=value" reaches the child processes: a
space separated list of 'key'='value' pairs, each side single quoted,
that git_config_from_parameters() reads back. I'll say that in the
message.

> Pointing to that other function makes sense, but neither of the
> functions documents the actual format that's used.

I'll put the format in the header comment as well.

Thanks,
Thomas

[PATCH v2 2/3] sequencer: run auto maintenance once a sequence is done

[Thomas Bachem via GitGitGadget]

From: Thomas Bachem <mail@thomasbachem.com>

The apply backend of "git rebase" runs "git maintenance run --auto"
from finish_rebase() once it has applied its patches. The merge
backend, "git cherry-pick" and "git revert" do not run it when they
finish. They create their commits in process, and only the "git
commit" they spawn for an edited message or a resolved conflict, the
"git merge" a "rebase -r" spawns and an exec command start it, in the
middle of the sequence.

Run it where the sequencer finishes, so that every sequence ends the
way the apply backend does, and so that the next commit can keep it
out of the commands a sequence spawns.

Assisted-by: Claude Fable 5.1
Signed-off-by: Thomas Bachem <mail@thomasbachem.com>
---
 sequencer.c                     | 18 +++++++++++++++---
 t/t3418-rebase-continue.sh      |  8 ++++++++
 t/t3510-cherry-pick-sequence.sh | 10 ++++++++++
 3 files changed, 33 insertions(+), 3 deletions(-)

diff --git a/sequencer.c b/sequencer.c
index 65afd100d9..67e1c38762 100644
--- a/sequencer.c
+++ b/sequencer.c
@@ -5313,6 +5313,12 @@ cleanup_head_ref:
 			return -1;
 	}
 
+	/*
+	 * We ignore errors in 'git maintenance run --auto', since the
+	 * user should see them.
+	 */
+	run_auto_maintenance(r, opts->quiet);
+
 	/*
 	 * Sequence of picks finished successfully; cleanup by
 	 * removing the .git/sequencer directory
@@ -5577,10 +5583,14 @@ int sequencer_continue(struct repository *r, struct replay_opts *opts)
 			res = -1;
 			goto release_todo_list;
 		}
-	} else if (!file_exists(get_todo_path(opts)))
-		return continue_single_pick(r, opts);
-	else if ((res = read_populate_todo(r, &todo_list, opts)))
+	} else if (!file_exists(get_todo_path(opts))) {
+		res = continue_single_pick(r, opts);
+		if (!res)
+			run_auto_maintenance(r, opts->quiet);
+		return res;
+	} else if ((res = read_populate_todo(r, &todo_list, opts))) {
 		goto release_todo_list;
+	}
 
 	if (!is_rebase_i(opts)) {
 		/* Verify that the conflict has been resolved */
@@ -5698,6 +5708,8 @@ int sequencer_pick_revisions(struct repository *r,
 			BUG("unexpected extra commit from walk");
 
 		res = single_pick(r, cmit, opts);
+		if (!res)
+			run_auto_maintenance(r, opts->quiet);
 		goto out;
 	}
 
diff --git a/t/t3418-rebase-continue.sh b/t/t3418-rebase-continue.sh
index cb5c3a1cb5..2c34cf8a01 100755
--- a/t/t3418-rebase-continue.sh
+++ b/t/t3418-rebase-continue.sh
@@ -395,4 +395,12 @@ test_orig_head () {
 test_orig_head --apply
 test_orig_head --merge
 
+test_expect_success 'rebase runs auto maintenance at its end' '
+	git checkout -b one-exec main^ &&
+	test_commit F4 &&
+	test_must_fail git rebase -x false main &&
+	GIT_TRACE2_EVENT="$(pwd)/finish.txt" git rebase --continue &&
+	test_subcommand_flex git maintenance run --auto <finish.txt
+'
+
 test_done
diff --git a/t/t3510-cherry-pick-sequence.sh b/t/t3510-cherry-pick-sequence.sh
index 5777dff496..304981ccd6 100755
--- a/t/t3510-cherry-pick-sequence.sh
+++ b/t/t3510-cherry-pick-sequence.sh
@@ -721,4 +721,14 @@ test_expect_success 'commit descriptions in insn sheet are optional' '
 	test_line_count = 4 commits
 '
 
+test_expect_success 'cherry-pick runs auto maintenance once it is done' '
+	pristine_detach base &&
+	GIT_TRACE2_EVENT="$(pwd)/single.txt" git cherry-pick picked &&
+	test_subcommand_flex git maintenance run --auto <single.txt &&
+	GIT_TRACE2_EVENT="$(pwd)/sequence.txt" \
+		git cherry-pick anotherpick yetanotherpick &&
+	grep "\"child_start\".*\"maintenance\"" sequence.txt >maintenance &&
+	test_line_count = 1 maintenance
+'
+
 test_done
-- 
gitgitgadget

Re: [PATCH v2 2/3] sequencer: run auto maintenance once a sequence is done

[Patrick Steinhardt]

On Fri, Sep 04, 2026 at 03:51:25PM +0000, Thomas Bachem via GitGitGadget wrote:
> From: Thomas Bachem <mail@thomasbachem.com>
> 
> The apply backend of "git rebase" runs "git maintenance run --auto"
> from finish_rebase() once it has applied its patches. The merge
> backend, "git cherry-pick" and "git revert" do not run it when they
> finish. They create their commits in process, and only the "git
> commit" they spawn for an edited message or a resolved conflict, the
> "git merge" a "rebase -r" spawns and an exec command start it, in the
> middle of the sequence.

This paragraph just doesn't parse for me, it's really hard to tell what
it even wants to say.

> Run it where the sequencer finishes, so that every sequence ends the
> way the apply backend does, and so that the next commit can keep it
> out of the commands a sequence spawns.

Besides moving stuff around to prep for the next commit, what does this
change? Like, do we now run the command in cases where we didn't before?
And if so, what are the consequences of doing so?

> diff --git a/sequencer.c b/sequencer.c
> index 65afd100d9..67e1c38762 100644
> --- a/sequencer.c
> +++ b/sequencer.c
> @@ -5313,6 +5313,12 @@ cleanup_head_ref:
>  			return -1;
>  	}
>  
> +	/*
> +	 * We ignore errors in 'git maintenance run --auto', since the
> +	 * user should see them.
> +	 */
> +	run_auto_maintenance(r, opts->quiet);
> +
>  	/*
>  	 * Sequence of picks finished successfully; cleanup by
>  	 * removing the .git/sequencer directory
> @@ -5577,10 +5583,14 @@ int sequencer_continue(struct repository *r, struct replay_opts *opts)
>  			res = -1;
>  			goto release_todo_list;
>  		}
> -	} else if (!file_exists(get_todo_path(opts)))
> -		return continue_single_pick(r, opts);
> -	else if ((res = read_populate_todo(r, &todo_list, opts)))
> +	} else if (!file_exists(get_todo_path(opts))) {
> +		res = continue_single_pick(r, opts);
> +		if (!res)
> +			run_auto_maintenance(r, opts->quiet);
> +		return res;
> +	} else if ((res = read_populate_todo(r, &todo_list, opts))) {
>  		goto release_todo_list;
> +	}
>  
>  	if (!is_rebase_i(opts)) {
>  		/* Verify that the conflict has been resolved */
> @@ -5698,6 +5708,8 @@ int sequencer_pick_revisions(struct repository *r,
>  			BUG("unexpected extra commit from walk");
>  
>  		res = single_pick(r, cmit, opts);
> +		if (!res)
> +			run_auto_maintenance(r, opts->quiet);
>  		goto out;
>  	}
>  

It's surprisingly many sites where you add the call to
`run_auto_maintenance()`. My hope was that there is a single exit path
somewhere that is used by both the "apply" and "merge" strategy that we
could adapt to unify when exactly we run auto-maintenance across both
backends.

Patrick

Re: [PATCH v2 2/3] sequencer: run auto maintenance once a sequence is done

[Thomas Bachem]

Hi Patrick,

On 07/09/2026 10:14, Patrick Steinhardt wrote:
> This paragraph just doesn't parse for me, it's really hard to tell what
> it even wants to say.

Sorry, I'll rewrite it. What I meant: the apply backend runs auto
maintenance from finish_rebase() when it is done. The merge backend,
cherry-pick and revert create their commits in process and never run
it themselves. It only runs when they spawn a command that runs it
anyway: "git commit" for an edited message or a resolved conflict,
"git merge" for an octopus merge or a custom strategy in "rebase -r",
or a git command in an exec. So a clean sequence never runs it, and
one with conflicts runs it after each resolution, in the middle of the
sequence.

> Besides moving stuff around to prep for the next commit, what does this
> change? Like, do we now run the command in cases where we didn't before?
> And if so, what are the consequences of doing so?

Yes. After this patch every sequence that finishes runs it at the end,
like a "git commit" or an apply backend rebase does. The next patch
stops the runs in the middle, so it ends up as one run per sequence.
The case that changes is a sequence with no conflict to resolve and no
message to edit. Such a sequence never ran it at all, so its loose
objects waited for the next commit. It is the same
"git maintenance run --auto --detach" as after a commit, so it runs in
the background and does nothing unless a threshold is met. I'll put
that in the message.

> It's surprisingly many sites where you add the call to
> `run_auto_maintenance()`. My hope was that there is a single exit path
> somewhere that is used by both the "apply" and "merge" strategy that we
> could adapt to unify when exactly we run auto-maintenance across both
> backends.

There is none inside the sequencer. run_specific_rebase() calls
finish_rebase() for the apply backend only,
"merge backend cleans up after itself" as the comment there says.
Sequences end inside pick_commits(), and a single cherry-pick or
revert never creates sequencer state at all and returns straight to
builtin/revert.c. That is where the three sites come from.

I could instead do what the apply backend already does. am.c skips
maintenance in rebasing mode and leaves it to rebase.c. If the
sequencer leaves it to its callers the same way, run_specific_rebase()
runs it for the merge backend too, once its state directory is gone,
and run_sequencer() in builtin/revert.c runs it for cherry-pick and
revert. Every entry into the merge backend returns through
run_specific_rebase(), --continue and --skip included, so nothing is
missed. The sequencer then never runs it, the change is in the two
builtins only, and the rule is short: the command runs it once when it
is done, and nothing it spawns does. Is that what you had in mind?

Thanks,
Thomas

Re: [PATCH v2 2/3] sequencer: run auto maintenance once a sequence is done

[Patrick Steinhardt]

On Mon, Sep 07, 2026 at 06:35:20PM +0200, Thomas Bachem wrote:
> On 07/09/2026 10:14, Patrick Steinhardt wrote:
[snip]
> > It's surprisingly many sites where you add the call to
> > `run_auto_maintenance()`. My hope was that there is a single exit path
> > somewhere that is used by both the "apply" and "merge" strategy that we
> > could adapt to unify when exactly we run auto-maintenance across both
> > backends.
> 
> There is none inside the sequencer. run_specific_rebase() calls
> finish_rebase() for the apply backend only,
> "merge backend cleans up after itself" as the comment there says.
> Sequences end inside pick_commits(), and a single cherry-pick or
> revert never creates sequencer state at all and returns straight to
> builtin/revert.c. That is where the three sites come from.
> 
> I could instead do what the apply backend already does. am.c skips
> maintenance in rebasing mode and leaves it to rebase.c. If the
> sequencer leaves it to its callers the same way, run_specific_rebase()
> runs it for the merge backend too, once its state directory is gone,
> and run_sequencer() in builtin/revert.c runs it for cherry-pick and
> revert. Every entry into the merge backend returns through
> run_specific_rebase(), --continue and --skip included, so nothing is
> missed. The sequencer then never runs it, the change is in the two
> builtins only, and the rule is short: the command runs it once when it
> is done, and nothing it spawns does. Is that what you had in mind?

Maybe. The question is what kind of impact it would have on other
subsystems. I think the most important part that I'm after is that the
commit message explains design decisions like this, as it gives the
reader the required context to be able to evaluate the patch.

And please stay mindful of LLM-generated commit messages. For most of
the part they are just completely useless as they tend to ramble without
conveying any useful information. The commit message is the place where
you yourself sell the change to us, and by explaining the changes well
you demonstrate that you understand what you're sending to the mailing
list.

An LLM-generated commit message on the other side demonstrates nothing
like that. So in many cases, it's actively hurting your own mission as
people do notice that it's not generated by humans.

It's fine to use LLMs to help you with drafting the commit message. But
what we're asking is that you double or even triple check what was
generated and whether the generated message (1) makes sense and (2) is
understandable by a normal human being.

Thanks!

Patrick

Re: [PATCH v2 2/3] sequencer: run auto maintenance once a sequence is done

[Thomas Bachem]

Hi Patrick,

On 08/09/2026 07:50, Patrick Steinhardt wrote:
> Maybe. The question is what kind of impact it would have on other
> subsystems. I think the most important part that I'm after is that the
> commit message explains design decisions like this, as it gives the
> reader the required context to be able to evaluate the patch.

None that I can see. Outside sequencer.c the sequencer is only entered
from builtin/rebase.c and builtin/revert.c, so those two are the only
places the call moves to. I'll put that, and why, in the commit
message.

> It's fine to use LLMs to help you with drafting the commit message. But
> what we're asking is that you double or even triple check what was
> generated and whether the generated message (1) makes sense and (2) is
> understandable by a normal human being.

Okay, I'll rewrite all three messages for v3.

Thanks,
Thomas

Re: [PATCH v2 2/3] sequencer: run auto maintenance once a sequence is done

[Phillip Wood]

Hi Thomas

On 04/09/2026 16:51, Thomas Bachem via GitGitGadget wrote:
> From: Thomas Bachem <mail@thomasbachem.com>
> 
> The apply backend of "git rebase" runs "git maintenance run --auto"
> from finish_rebase() once it has applied its patches. The merge
> backend, "git cherry-pick" and "git revert" do not run it when they

     The merge backend which is also used by "git cherry-pick" and "git
     revert" does not run it when it finishes.

would be clearer to me

> finish. They create their commits in process, and only the "git
> commit" they spawn for an edited message or a resolved conflict, the
> "git merge" a "rebase -r" spawns and an exec command start it, in the
> middle of the sequence.

Like Patrick I cannot understand what this is saying, let alone whether 
it is saying anything useful.


> Run it where the sequencer finishes, so that every sequence ends the
> way the apply backend does, and so that the next commit can keep it
> out of the commands a sequence spawns.

     Run "git maintenace --auto" at the end of all sequencer operations,
     ...

would be clearer to me

> diff --git a/sequencer.c b/sequencer.c
> index 65afd100d9..67e1c38762 100644
> --- a/sequencer.c
> +++ b/sequencer.c
> @@ -5313,6 +5313,12 @@ cleanup_head_ref:

This makes me think we should change the fragment re for c files to 
exclude ':', but that's a digression and would mean having different 
expressions for c and c++.

Anyway this change is at the end of pick_commits(), just before we 
finish so looks like the right place to call run_auto_maintenance()

>   			return -1;
>   	}
>   
> +	/*
> +	 * We ignore errors in 'git maintenance run --auto', since the
> +	 * user should see them.
> +	 */
> +	run_auto_maintenance(r, opts->quiet);
> +
>   	/*
>   	 * Sequence of picks finished successfully; cleanup by
>   	 * removing the .git/sequencer directory
> @@ -5577,10 +5583,14 @@ int sequencer_continue(struct repository *r, struct replay_opts *opts)
>   			res = -1;
>   			goto release_todo_list;
>   		}
> -	} else if (!file_exists(get_todo_path(opts)))
> -		return continue_single_pick(r, opts);
> -	else if ((res = read_populate_todo(r, &todo_list, opts)))
> +	} else if (!file_exists(get_todo_path(opts))) {
> +		res = continue_single_pick(r, opts);

It is a shame the single pick variants of "git cherry-pick" and "git 
revert" do not share the same code path as the multiple pick variants. 
continue_single_pick() runs "git commit" without calling 
run_git_commit() which is also unfortunate, but means that we could just 
rely and "git commit" to call run_auto_maintenance() for us.

> +		if (!res)
> +			run_auto_maintenance(r, opts->quiet);
> +		return res;
> +	} else if ((res = read_populate_todo(r, &todo_list, opts))) {
>   		goto release_todo_list;
> +	}
>   
>   	if (!is_rebase_i(opts)) {
>   		/* Verify that the conflict has been resolved */
> @@ -5698,6 +5708,8 @@ int sequencer_pick_revisions(struct repository *r,
>   			BUG("unexpected extra commit from walk");
>   
>   		res = single_pick(r, cmit, opts);
> +		if (!res)
> +			run_auto_maintenance(r, opts->quiet);
>   		goto out;
>   	}
>   
> diff --git a/t/t3418-rebase-continue.sh b/t/t3418-rebase-continue.sh
> index cb5c3a1cb5..2c34cf8a01 100755
> --- a/t/t3418-rebase-continue.sh
> +++ b/t/t3418-rebase-continue.sh
> @@ -395,4 +395,12 @@ test_orig_head () {
>   test_orig_head --apply
>   test_orig_head --merge
>   
> +test_expect_success 'rebase runs auto maintenance at its end' '
> +	git checkout -b one-exec main^ &&
> +	test_commit F4 &&
> +	test_must_fail git rebase -x false main &&

Do we want to assert that we don't run auto maintenance up to this point?

> +	GIT_TRACE2_EVENT="$(pwd)/finish.txt" git rebase --continue &&
> +	test_subcommand_flex git maintenance run --auto <finish.txt
> +'
> +
>   test_done
> diff --git a/t/t3510-cherry-pick-sequence.sh b/t/t3510-cherry-pick-sequence.sh
> index 5777dff496..304981ccd6 100755
> --- a/t/t3510-cherry-pick-sequence.sh
> +++ b/t/t3510-cherry-pick-sequence.sh
> @@ -721,4 +721,14 @@ test_expect_success 'commit descriptions in insn sheet are optional' '
>   	test_line_count = 4 commits
>   '
>   
> +test_expect_success 'cherry-pick runs auto maintenance once it is done' '
> +	pristine_detach base &&
> +	GIT_TRACE2_EVENT="$(pwd)/single.txt" git cherry-pick picked &&
> +	test_subcommand_flex git maintenance run --auto <single.txt &&
> +	GIT_TRACE2_EVENT="$(pwd)/sequence.txt" \
> +		git cherry-pick anotherpick yetanotherpick &&
> +	grep "\"child_start\".*\"maintenance\"" sequence.txt >maintenance &&

Using test_grep here would mean we get some useful test output if there 
are not matches in the file. Without that test_line_count just says the 
line count didn't match and prints an empty file.


Thanks

Phillip

> +	test_line_count = 1 maintenance
> +'
> +
>   test_done

Re: [PATCH v2 2/3] sequencer: run auto maintenance once a sequence is done

[Thomas Bachem]

Hi Phillip,

On 07/09/2026 15:25, Phillip Wood wrote:
>      The merge backend which is also used by "git cherry-pick" and "git
>      revert" does not run it when it finishes.
>
> would be clearer to me

Yes, I'll use that.

> Like Patrick I cannot understand what this is saying, let alone whether
> it is saying anything useful.

I've spelled it out in my reply to Patrick and will rewrite the
message that way.

>      Run "git maintenace --auto" at the end of all sequencer operations,
>      ...
>
> would be clearer to me

That too.

> Anyway this change is at the end of pick_commits(), just before we
> finish so looks like the right place to call run_auto_maintenance()

Patrick would rather have one exit shared by both rebase backends. In
my reply to him I've proposed moving the call out of the sequencer
into builtin/rebase.c and builtin/revert.c, the way am.c leaves it to
rebase.c today. Say if you'd rather keep it here.

> It is a shame the single pick variants of "git cherry-pick" and "git
> revert" do not share the same code path as the multiple pick variants.
> continue_single_pick() runs "git commit" without calling
> run_git_commit() which is also unfortunate, but means that we could just
> rely and "git commit" to call run_auto_maintenance() for us.

That works until the next patch, which turns auto maintenance off in
every command the sequencer spawns, this "git commit" included. So
somebody has to run it afterwards. With the call in builtin/revert.c,
cherry-pick does that itself once the continue returns.

> Do we want to assert that we don't run auto maintenance up to this point?

Yes, I'll add that, and the next patch will extend this test instead
of adding its own.

> Using test_grep here would mean we get some useful test output if there
> are not matches in the file. Without that test_line_count just says the
> line count didn't match and prints an empty file.

Will do.

Thanks,
Thomas

Re: [PATCH v2 2/3] sequencer: run auto maintenance once a sequence is done

[Phillip Wood]

Hi Thomas

On 07/09/2026 17:36, Thomas Bachem wrote:
> 
>> Anyway this change is at the end of pick_commits(), just before we
>> finish so looks like the right place to call run_auto_maintenance()
> 
> Patrick would rather have one exit shared by both rebase backends. In
> my reply to him I've proposed moving the call out of the sequencer
> into builtin/rebase.c and builtin/revert.c, the way am.c leaves it to
> rebase.c today. Say if you'd rather keep it here.

That works for we and means we don't have to sprinkle calls to 
run_auto_maintenance() around to accommodate the different code paths 
for single and multiple picks.
>> It is a shame the single pick variants of "git cherry-pick" and "git
>> revert" do not share the same code path as the multiple pick variants.
>> continue_single_pick() runs "git commit" without calling
>> run_git_commit() which is also unfortunate, but means that we could just
>> rely and "git commit" to call run_auto_maintenance() for us.
> 
> That works until the next patch, which turns auto maintenance off in
> every command the sequencer spawns, this "git commit" included. So
> somebody has to run it afterwards. With the call in builtin/revert.c,
> cherry-pick does that itself once the continue returns.

Sounds good

Thanks

Phillip

> 
>> Do we want to assert that we don't run auto maintenance up to this point?
> 
> Yes, I'll add that, and the next patch will extend this test instead
> of adding its own.
> 
>> Using test_grep here would mean we get some useful test output if there
>> are not matches in the file. Without that test_line_count just says the
>> line count didn't match and prints an empty file.
> 
> Will do.
> 
> Thanks,
> Thomas

[PATCH v2 3/3] sequencer: keep auto maintenance out of the commands a sequence spawns

[Thomas Bachem via GitGitGadget]

From: Thomas Bachem <mail@thomasbachem.com>

The "git commit" and "git merge" the sequencer spawns, and the git
commands an exec runs, each start "git maintenance run --auto
--detach", which then works in the background against the sequence
itself. A "rerere gc" started by the commit of one "git rebase
--continue" holds MERGE_RR.lock when the next pick needs it, and a
repack deletes packs the sequencer still has open, which 65cda10d5b
(sequencer: release the ODB before spawning git commit, 2026-08-12)
had to work around.

The loose objects a sequence creates wait for the run at its end that
the previous commit added. Whether a sequence can be long enough to
suffer from them before that remains to be seen. Pass
maintenance.auto=false and gc.auto=0 to the spawned commands through
GIT_CONFIG_PARAMETERS, which the shell of an exec command hands on to
whatever it runs, appended after the user's own -c settings so that
ours win, and built once per run. A command the user runs while the
sequence is stopped, like "git commit --amend" at an edit, is not the
sequencer's to control and still runs maintenance.

Assisted-by: Claude Fable 5.1
Signed-off-by: Thomas Bachem <mail@thomasbachem.com>
---
 sequencer.c                     | 39 ++++++++++++++++++++++++++++++---
 t/t3418-rebase-continue.sh      | 18 +++++++++++++++
 t/t3510-cherry-pick-sequence.sh | 17 ++++++++++++++
 3 files changed, 71 insertions(+), 3 deletions(-)

diff --git a/sequencer.c b/sequencer.c
index 67e1c38762..5df07750a7 100644
--- a/sequencer.c
+++ b/sequencer.c
@@ -234,6 +234,11 @@ struct replay_ctx {
 	 * Whether message contains a commit message.
 	 */
 	unsigned have_message :1;
+	/*
+	 * The GIT_CONFIG_PARAMETERS value that keeps auto maintenance out
+	 * of the commands we spawn, built on first use.
+	 */
+	struct strbuf config_parameters;
 };
 
 struct replay_ctx* replay_ctx_new(void)
@@ -242,6 +247,7 @@ struct replay_ctx* replay_ctx_new(void)
 
 	strbuf_init(&ctx->current_fixups, 0);
 	strbuf_init(&ctx->message, 0);
+	strbuf_init(&ctx->config_parameters, 0);
 
 	return ctx;
 }
@@ -407,6 +413,7 @@ static void replay_ctx_release(struct replay_ctx *ctx)
 {
 	strbuf_release(&ctx->current_fixups);
 	strbuf_release(&ctx->message);
+	strbuf_release(&ctx->config_parameters);
 }
 
 void replay_opts_release(struct replay_opts *opts)
@@ -1107,6 +1114,27 @@ static int run_command_silent_on_success(struct child_process *cmd)
 	return rc;
 }
 
+/*
+ * A sequence runs auto maintenance once it is done, not from every command
+ * it spawns along the way: their background "rerere gc" or repack would
+ * race the sequencer for locks and files it still holds.
+ */
+static void disable_auto_maintenance(struct replay_opts *opts,
+				     struct child_process *cmd)
+{
+	struct strbuf *params = &opts->ctx->config_parameters;
+
+	if (!params->len) {
+		const char *old = getenv(CONFIG_DATA_ENVIRONMENT);
+
+		if (old && *old)
+			strbuf_addstr(params, old);
+		git_config_append_parameter(params, "maintenance.auto", "false");
+		git_config_append_parameter(params, "gc.auto", "0");
+	}
+	strvec_pushf(&cmd->env, "%s=%s", CONFIG_DATA_ENVIRONMENT, params->buf);
+}
+
 /*
  * If we are cherry-pick, and if the merge did not result in
  * hand-editing, we will hit this commit and inherit the original
@@ -1148,6 +1176,7 @@ static int run_git_commit(const char *defmsg,
 			     author_date_from_env(&cmd.env));
 	if (opts->ignore_date)
 		strvec_push(&cmd.env, "GIT_AUTHOR_DATE=");
+	disable_auto_maintenance(opts, &cmd);
 
 	strvec_push(&cmd.args, "commit");
 
@@ -3924,16 +3953,18 @@ static int error_failed_squash(struct repository *r,
 	return error_with_patch(r, commit, subject, subject_len, opts, 1, 1);
 }
 
-static int do_exec(struct repository *r, const char *command_line, int quiet)
+static int do_exec(struct repository *r, const char *command_line,
+		   struct replay_opts *opts)
 {
 	struct child_process cmd = CHILD_PROCESS_INIT;
 	int dirty, status;
 
-	if (!quiet)
+	if (!opts->quiet)
 		fprintf(stderr, _("Executing: %s\n"), command_line);
 	cmd.use_shell = 1;
 	strvec_push(&cmd.args, command_line);
 	strvec_push(&cmd.env, "GIT_CHERRY_PICK_HELP");
+	disable_auto_maintenance(opts, &cmd);
 	status = run_command(&cmd);
 
 	/* force re-reading of the cache */
@@ -4342,6 +4373,7 @@ static int do_merge(struct repository *r,
 				     author_date_from_env(&cmd.env));
 		if (opts->ignore_date)
 			strvec_push(&cmd.env, "GIT_AUTHOR_DATE=");
+		disable_auto_maintenance(opts, &cmd);
 
 		cmd.git_cmd = 1;
 		strvec_push(&cmd.args, "merge");
@@ -5158,7 +5190,7 @@ static int pick_commits(struct repository *r,
 			if (!opts->verbose)
 				term_clear_line();
 			*end_of_arg = '\0';
-			res = do_exec(r, arg, opts->quiet);
+			res = do_exec(r, arg, opts);
 			*end_of_arg = saved;
 
 			if (res) {
@@ -5335,6 +5367,7 @@ static int continue_single_pick(struct repository *r, struct replay_opts *opts)
 		return error(_("no cherry-pick or revert in progress"));
 
 	cmd.git_cmd = 1;
+	disable_auto_maintenance(opts, &cmd);
 	strvec_push(&cmd.args, "commit");
 
 	/*
diff --git a/t/t3418-rebase-continue.sh b/t/t3418-rebase-continue.sh
index 2c34cf8a01..cf6d20ce79 100755
--- a/t/t3418-rebase-continue.sh
+++ b/t/t3418-rebase-continue.sh
@@ -403,4 +403,22 @@ test_expect_success 'rebase runs auto maintenance at its end' '
 	test_subcommand_flex git maintenance run --auto <finish.txt
 '
 
+test_expect_success 'rebase spawns no auto maintenance before its end' '
+	git checkout -b two-conflicts topic &&
+	test_commit F2-again F2 222 &&
+	test_must_fail git rebase -x "git commit --allow-empty -m exec" main &&
+	echo resolved >F2 &&
+	git add F2 &&
+	test_must_fail env GIT_TRACE2_EVENT="$(pwd)/mid.txt" \
+		git rebase --continue &&
+	test_subcommand_flex git commit <mid.txt &&
+	test_subcommand_flex ! git maintenance run --auto <mid.txt &&
+	echo resolved >F2 &&
+	git add F2 &&
+	GIT_TRACE2_EVENT="$(pwd)/end.txt" git rebase --continue &&
+	test_subcommand_flex git maintenance run --auto <end.txt &&
+	grep "\"child_start\".*\"maintenance\"" end.txt >maintenance &&
+	test_line_count = 1 maintenance
+'
+
 test_done
diff --git a/t/t3510-cherry-pick-sequence.sh b/t/t3510-cherry-pick-sequence.sh
index 304981ccd6..57a77d91bd 100755
--- a/t/t3510-cherry-pick-sequence.sh
+++ b/t/t3510-cherry-pick-sequence.sh
@@ -731,4 +731,21 @@ test_expect_success 'cherry-pick runs auto maintenance once it is done' '
 	test_line_count = 1 maintenance
 '
 
+test_expect_success 'cherry-pick spawns no auto maintenance before it is done' '
+	pristine_detach initial &&
+	test_must_fail git cherry-pick base..anotherpick &&
+	echo resolved >foo &&
+	git add foo &&
+	test_must_fail env GIT_TRACE2_EVENT="$(pwd)/mid.txt" \
+		git cherry-pick --continue &&
+	test_subcommand_flex git commit <mid.txt &&
+	test_subcommand_flex ! git maintenance run --auto <mid.txt &&
+	echo d >foo &&
+	git add foo &&
+	GIT_TRACE2_EVENT="$(pwd)/end.txt" git cherry-pick --continue &&
+	test_subcommand_flex git commit <end.txt &&
+	grep "\"child_start\".*\"maintenance\"" end.txt >maintenance &&
+	test_line_count = 1 maintenance
+'
+
 test_done
-- 
gitgitgadget

Re: [PATCH v2 3/3] sequencer: keep auto maintenance out of the commands a sequence spawns

[Junio C Hamano]

"Thomas Bachem via GitGitGadget" <gitgitgadget@gmail.com> writes:

> +	/*
> +	 * The GIT_CONFIG_PARAMETERS value that keeps auto maintenance out
> +	 * of the commands we spawn, built on first use.
> +	 */
> +	struct strbuf config_parameters;

Does this have to be a "struct strbuf", not "const char *"?  The
latter makes it clear that it will never change its value once you
built it in disable_auto_maintenance().

> +static void disable_auto_maintenance(struct replay_opts *opts,
> +				     struct child_process *cmd)
> +{
> +	struct strbuf *params = &opts->ctx->config_parameters;
> +
> +	if (!params->len) {
> +		const char *old = getenv(CONFIG_DATA_ENVIRONMENT);
> +
> +		if (old && *old)
> +			strbuf_addstr(params, old);
> +		git_config_append_parameter(params, "maintenance.auto", "false");
> +		git_config_append_parameter(params, "gc.auto", "0");
> +	}
> +	strvec_pushf(&cmd->env, "%s=%s", CONFIG_DATA_ENVIRONMENT, params->buf);
> +}

This would then become something like

	if (!opts->ctx->config_parameters) {
		const char *old = getenv(CONFIG_DATA_ENVIRONMENT);
		struct strbuf params = STRBUF_INIT;

                if (old && *old)
			strbuf_addstr(&params, old);
		git_config_append_parameter(&params, "maintenance.auto", "0");
		git_config_append_parameter(&params, "gc.auto", "0");
		opts->ctx->config_parameters = strbuf_detach(&params, NULL);
	}
	strbuf_pushf(..., opts->ctx->config_parameters);

Re: [PATCH v2 3/3] sequencer: keep auto maintenance out of the commands a sequence spawns

[Thomas Bachem]

Hi Junio,

On 04/09/2026 23:21, Junio C Hamano wrote:
> Does this have to be a "struct strbuf", not "const char *"?  The
> latter makes it clear that it will never change its value once you
> built it in disable_auto_maintenance().

It doesn't. I'll make it a char * that replay_ctx_release() frees,
built the way you sketch, in the next version.

Thanks,
Thomas

Re: [PATCH v2 3/3] sequencer: keep auto maintenance out of the commands a sequence spawns

[Patrick Steinhardt]

On Fri, Sep 04, 2026 at 03:51:26PM +0000, Thomas Bachem via GitGitGadget wrote:
> diff --git a/sequencer.c b/sequencer.c
> index 67e1c38762..5df07750a7 100644
> --- a/sequencer.c
> +++ b/sequencer.c
> @@ -1107,6 +1114,27 @@ static int run_command_silent_on_success(struct child_process *cmd)
>  	return rc;
>  }
>  
> +/*
> + * A sequence runs auto maintenance once it is done, not from every command
> + * it spawns along the way: their background "rerere gc" or repack would
> + * race the sequencer for locks and files it still holds.
> + */
> +static void disable_auto_maintenance(struct replay_opts *opts,
> +				     struct child_process *cmd)
> +{
> +	struct strbuf *params = &opts->ctx->config_parameters;
> +
> +	if (!params->len) {
> +		const char *old = getenv(CONFIG_DATA_ENVIRONMENT);
> +
> +		if (old && *old)
> +			strbuf_addstr(params, old);
> +		git_config_append_parameter(params, "maintenance.auto", "false");
> +		git_config_append_parameter(params, "gc.auto", "0");
> +	}
> +	strvec_pushf(&cmd->env, "%s=%s", CONFIG_DATA_ENVIRONMENT, params->buf);
> +}
> +

Why do you set both "maintenance.auto" and "gc.auto"? Setting only the
former should be sufficient, as maintenance uses git-maintenance(1)
exclusively nowadays. Sure, it may trigger git-gc(1) internally. But it
won't ever do so if auto-maintenance is completely disabled.

Patrick

Re: [PATCH v2 3/3] sequencer: keep auto maintenance out of the commands a sequence spawns

[Thomas Bachem]

Hi Patrick,

On 07/09/2026 10:14, Patrick Steinhardt wrote:
> Why do you set both "maintenance.auto" and "gc.auto"? Setting only the
> former should be sufficient, as maintenance uses git-maintenance(1)
> exclusively nowadays. Sure, it may trigger git-gc(1) internally. But it
> won't ever do so if auto-maintenance is completely disabled.

You're right. prepare_auto_maintenance() looks at gc.auto only when
maintenance.auto is unset, so maintenance.auto alone is enough.
gc.auto=0 would still stop an exec that runs "git gc --auto" itself,
but I don't think we need to guard against that. I'll drop it in v3.

Thanks,
Thomas

Re: [PATCH v2 3/3] sequencer: keep auto maintenance out of the commands a sequence spawns

[Phillip Wood]

On 04/09/2026 16:51, Thomas Bachem via GitGitGadget wrote:
> From: Thomas Bachem <mail@thomasbachem.com>
> 
> The "git commit" and "git merge" the sequencer spawns, and the git
> commands an exec runs, each start "git maintenance run --auto
> --detach", which then works in the background against the sequence
> itself. 

I don't think maintenance is actively working against other commands, it 
just creates lock contention. Maybe something like

     When the sequencer runs "git commit" or "git merge", either directly
     or via a user supplied exec command, those commands run "git
     maintenance --auto --detach" which can cause lock contention with
     the sequencer.

> A "rerere gc" started by the commit of one "git rebase
> --continue" holds MERGE_RR.lock when the next pick needs it, and a
> repack deletes packs the sequencer still has open, which 65cda10d5b
> (sequencer: release the ODB before spawning git commit, 2026-08-12)
> had to work around.

This is pretty hard to understand. What does 'the commit of one "git 
rebase --continue"' mean? Also whether the next pick needs to take 
MERGE_RR.lock is conditional on there being conflicts which isn't at all 
clear.
> The loose objects a sequence creates wait for the run at its end that
> the previous commit added.

What does that mean?

> Whether a sequence can be long enough to
> suffer from them before that remains to be seen. Pass
> maintenance.auto=false and gc.auto=0 to the spawned commands through
> GIT_CONFIG_PARAMETERS, which the shell of an exec command hands on to
> whatever it runs,

Talking about the shell here is unnecessarily confusing as the command 
is not necessarily run by the shell: if it is a single word that does 
not contain any shell metacharacters it is passed directly to exec()

> appended after the user's own -c settings so that
> ours win, and built once per run. A command the user runs while the
> sequence is stopped, like "git commit --amend" at an edit, is not the
> sequencer's to control and still runs maintenance.
> 

> @@ -1107,6 +1114,27 @@ static int run_command_silent_on_success(struct child_process *cmd)
>   	return rc;
>   }
>   
> +/*
> + * A sequence runs auto maintenance once it is done, not from every command
> + * it spawns along the way: their background "rerere gc" or repack would
> + * race the sequencer for locks and files it still holds.
> + */

This comment isn't wrong but sounds like an LLM, rather than something a 
person would write.

> +static void disable_auto_maintenance(struct replay_opts *opts,
> +				     struct child_process *cmd)
> +{
> +	struct strbuf *params = &opts->ctx->config_parameters;
> +
> +	if (!params->len) {
> +		const char *old = getenv(CONFIG_DATA_ENVIRONMENT);
> +
> +		if (old && *old)
> +			strbuf_addstr(params, old);
> +		git_config_append_parameter(params, "maintenance.auto", "false");
> +		git_config_append_parameter(params, "gc.auto", "0");

This is much nicer now we have the helper function and the calls to 
disable_auto_maintenance() that I've trimmed all look good.
> diff --git a/t/t3418-rebase-continue.sh b/t/t3418-rebase-continue.sh
> index 2c34cf8a01..cf6d20ce79 100755
> --- a/t/t3418-rebase-continue.sh
> +++ b/t/t3418-rebase-continue.sh
> @@ -403,4 +403,22 @@ test_expect_success 'rebase runs auto maintenance at its end' '
>   	test_subcommand_flex git maintenance run --auto <finish.txt
>   '
>   
> +test_expect_success 'rebase spawns no auto maintenance before its end' '
> +	git checkout -b two-conflicts topic &&
> +	test_commit F2-again F2 222 &&
> +	test_must_fail git rebase -x "git commit --allow-empty -m exec" main &&
> +	echo resolved >F2 &&
> +	git add F2 &&
> +	test_must_fail env GIT_TRACE2_EVENT="$(pwd)/mid.txt" \
> +		git rebase --continue &&
> +	test_subcommand_flex git commit <mid.txt &&
> +	test_subcommand_flex ! git maintenance run --auto <mid.txt &&
> +	echo resolved >F2 &&
> +	git add F2 &&
> +	GIT_TRACE2_EVENT="$(pwd)/end.txt" git rebase --continue &&
> +	test_subcommand_flex git maintenance run --auto <end.txt &&
> +	grep "\"child_start\".*\"maintenance\"" end.txt >maintenance &&
> +	test_line_count = 1 maintenance

Shouldn't this just extend the test added in the previous patch, rather 
than duplicating the coverage for auto maintenance being run at the end 
of a rebase?

> +'
> +
>   test_done
> diff --git a/t/t3510-cherry-pick-sequence.sh b/t/t3510-cherry-pick-sequence.sh
> index 304981ccd6..57a77d91bd 100755
> --- a/t/t3510-cherry-pick-sequence.sh
> +++ b/t/t3510-cherry-pick-sequence.sh
> @@ -731,4 +731,21 @@ test_expect_success 'cherry-pick runs auto maintenance once it is done' '
>   	test_line_count = 1 maintenance
>   '
>   
> +test_expect_success 'cherry-pick spawns no auto maintenance before it is done' '
> +	pristine_detach initial &&
> +	test_must_fail git cherry-pick base..anotherpick &&
> +	echo resolved >foo &&
> +	git add foo &&
> +	test_must_fail env GIT_TRACE2_EVENT="$(pwd)/mid.txt" \
> +		git cherry-pick --continue &&
> +	test_subcommand_flex git commit <mid.txt &&
> +	test_subcommand_flex ! git maintenance run --auto <mid.txt &&
> +	echo d >foo &&
> +	git add foo &&
> +	GIT_TRACE2_EVENT="$(pwd)/end.txt" git cherry-pick --continue &&
> +	test_subcommand_flex git commit <end.txt &&
> +	grep "\"child_start\".*\"maintenance\"" end.txt >maintenance &&
> +	test_line_count = 1 maintenance

Again why do we need a separate test, rather than extending the one 
we've just added in the previous commit?

Thanks

Phillip

> +'
> +
>   test_done

Re: [PATCH v2 3/3] sequencer: keep auto maintenance out of the commands a sequence spawns

[Thomas Bachem]

Hi Phillip,

On 07/09/2026 15:24, Phillip Wood wrote:
> I don't think maintenance is actively working against other commands, it
> just creates lock contention. Maybe something like
>
>      When the sequencer runs "git commit" or "git merge", either directly
>      or via a user supplied exec command, those commands run "git
>      maintenance --auto --detach" which can cause lock contention with
>      the sequencer.

I'll use that. The repack case is a bit different, though. It can
delete a pack the sequencer still has open, which 65cda10d5b had to
work around, so I'll keep one sentence on it.

> This is pretty hard to understand. What does 'the commit of one "git
> rebase --continue"' mean? Also whether the next pick needs to take
> MERGE_RR.lock is conditional on there being conflicts which isn't at all
> clear.

I meant the "git commit" that "git rebase --continue" spawns for a
resolved conflict. Its maintenance run can still hold MERGE_RR.lock
when the next pick conflicts and rerere needs it. I'll write it like
that.

> What does that mean?

Once the spawned commands no longer run maintenance, a long sequence
can pile up loose objects, and nothing packs them before the run at
the end. I don't know whether a sequence can get long enough for that
to matter. I'll say it like this, or drop it.

> Talking about the shell here is unnecessarily confusing as the command
> is not necessarily run by the shell: if it is a single word that does
> not contain any shell metacharacters it is passed directly to exec()

Right, the environment reaches the command either way. I'll drop the
shell from the message.

> This comment isn't wrong but sounds like an LLM, rather than something a
> person would write.

I've rewritten it:

/*
* Don't let the commands we spawn run auto maintenance. It would
* race us for MERGE_RR.lock or delete packs we still have open,
* so it runs once at the end of the sequence instead.
*/

> Shouldn't this just extend the test added in the previous patch, rather
> than duplicating the coverage for auto maintenance being run at the end
> of a rebase?

Yes, I'll extend both tests from the previous patch instead.

Thanks,
Thomas

[PATCH v3 0/3] sequencer: leave auto maintenance to the end of a sequence

[Thomas Bachem via GitGitGadget]

Changes since v2:

 * Auto maintenance now runs from builtin/rebase.c and builtin/revert.c,
   once the command is done, instead of from three places inside the
   sequencer. That follows the apply backend, where "git am" leaves it to
   rebase.c (Patrick, Phillip).
 * gc.auto=0 dropped, maintenance.auto=false is enough (Patrick).
 * config_parameters is a char * built once with strbuf_detach() (Junio).
 * Patch 3 extends the tests of patch 2 instead of adding its own. They also
   assert that nothing runs before a stop, and cover a single pick with
   --edit and a sequence ending in --skip (Phillip).
 * Commit messages rewritten: what GIT_CONFIG_PARAMETERS is and looks like
   (Patrick), what patch 2 changes for the user and why the call moved
   (Patrick, Phillip), and the comment on the helper (Phillip).

Based on master. Independent of the rerere lock fix in [1].

[1] <pull.2214.v3.git.1788537081930.gitgitgadget@gmail.com>

Thomas Bachem (3):
  config: add git_config_append_parameter()
  rebase, cherry-pick, revert: run auto maintenance when done
  sequencer: disable auto maintenance in spawned commands

 builtin/rebase.c                | 13 ++++++++---
 builtin/revert.c                | 19 +++++++++++------
 config.c                        | 20 +++++++++++------
 config.h                        | 13 +++++++++++
 sequencer.c                     | 38 ++++++++++++++++++++++++++++++---
 t/t3418-rebase-continue.sh      | 17 +++++++++++++++
 t/t3510-cherry-pick-sequence.sh | 31 +++++++++++++++++++++++++++
 7 files changed, 131 insertions(+), 20 deletions(-)


base-commit: 3cb9185f65410273787f74333cc027d2ea5daada
Published-As: https://github.com/gitgitgadget/git/releases/tag/pr-2217%2Fthomasbachem%2Frebase-auto-maintenance-v3
Fetch-It-Via: git fetch https://github.com/gitgitgadget/git pr-2217/thomasbachem/rebase-auto-maintenance-v3
Pull-Request: https://github.com/gitgitgadget/git/pull/2217

Range-diff vs v2:

 1:  ef8087e80d ! 1:  70db5ad084 config: add git_config_append_parameter()
     @@ Metadata
       ## Commit message ##
          config: add git_config_append_parameter()
      
     -    Split the part of git_config_push_split_parameter() that formats one
     -    GIT_CONFIG_PARAMETERS entry into a helper that appends it to a strbuf,
     -    so that a caller can build a value for a child's environment without
     -    knowing the quoting. The sequencer is about to do that.
     +    "git -c key=value" passes its settings on to the git commands it
     +    spawns through the environment variable GIT_CONFIG_PARAMETERS. The
     +    value is a space separated list of 'key'='value' pairs with both
     +    sides single quoted, which git_config_from_parameters() reads back in
     +    the child. The only place we write such an entry is
     +    git_config_push_split_parameter(), and it writes straight into our
     +    own environment.
     +
     +    Split the formatting out into git_config_append_parameter(), which
     +    appends one entry to a strbuf, so that we can build such a value for
     +    a child's environment without repeating the quoting. The sequencer
     +    will use it in a later commit to pass settings to the commands it
     +    spawns.
      
          Assisted-by: Claude Fable 5.1
          Signed-off-by: Thomas Bachem <mail@thomasbachem.com>
     @@ config.h: int git_config_from_blob_oid(config_fn_t fn, const char *name,
       void git_config_push_env(const char *spec);
      +
      +/*
     -+ * Append `key=value` to the GIT_CONFIG_PARAMETERS value in `env`, quoted
     -+ * the way git_config_from_parameters() reads it, so that a child can be
     -+ * given configuration on top of what this process was given. A NULL
     -+ * `value` appends a boolean entry.
     ++ * Append a "-c key=value" setting to a GIT_CONFIG_PARAMETERS value in
     ++ * `env`. The variable carries such settings from a git process to the
     ++ * git commands it spawns, as a space separated list of 'key'='value'
     ++ * pairs with both sides single quoted, which git_config_from_parameters()
     ++ * reads back. A NULL `value` appends 'key'= with nothing after the equals
     ++ * sign, which stands for a boolean true, like "-c key" on the command
     ++ * line.
      + */
      +void git_config_append_parameter(struct strbuf *env, const char *key,
      +				 const char *value);
 2:  baab8d4876 ! 2:  68a728c5f4 sequencer: run auto maintenance once a sequence is done
     @@ Metadata
      Author: Thomas Bachem <mail@thomasbachem.com>
      
       ## Commit message ##
     -    sequencer: run auto maintenance once a sequence is done
     +    rebase, cherry-pick, revert: run auto maintenance when done
      
     -    The apply backend of "git rebase" runs "git maintenance run --auto"
     -    from finish_rebase() once it has applied its patches. The merge
     -    backend, "git cherry-pick" and "git revert" do not run it when they
     -    finish. They create their commits in process, and only the "git
     -    commit" they spawn for an edited message or a resolved conflict, the
     -    "git merge" a "rebase -r" spawns and an exec command start it, in the
     -    middle of the sequence.
     +    "git commit", "git merge", "git fetch" and "git am" run "git
     +    maintenance run --auto" when they are done, and so does the apply
     +    backend of "git rebase". That repacks the loose objects they wrote
     +    once there are enough of them, expires old rerere entries and does
     +    whatever other housekeeping is due.
      
     -    Run it where the sequencer finishes, so that every sequence ends the
     -    way the apply backend does, and so that the next commit can keep it
     -    out of the commands a sequence spawns.
     +    The merge backend of "git rebase", "git cherry-pick" and "git revert"
     +    do not. They create their commits in process, so auto maintenance
     +    runs only when they spawn a command that runs it on its own. That is
     +    the "git commit" for a resolved conflict or an edited message, the
     +    "git merge" that "--rebase-merges" spawns for an octopus merge, a
     +    strategy other than ort or any strategy option, and whatever an exec
     +    runs. A sequence that needs none of these never runs auto
     +    maintenance. One that stops for conflicts runs it after each
     +    resolution, in the middle of the sequence.
     +
     +    Run it once when the sequence is done, like the apply backend does.
     +
     +    The apply backend leaves that to builtin/rebase.c: "git am" skips
     +    auto maintenance in rebasing mode, and finish_rebase() runs it once
     +    the patches are applied. Do the same for the sequencer, from
     +    builtin/rebase.c and builtin/revert.c, because the sequencer itself
     +    has no single place where every sequence ends. A sequence of several
     +    commits ends inside pick_commits(). A single cherry-pick or revert
     +    never creates the sequencer's state directory and returns to its
     +    caller as soon as its commit is made. "--continue" and "--skip" have
     +    entry points of their own. Nothing but those two builtins starts or
     +    continues a sequence, so that is where we run auto maintenance.
     +    run_specific_rebase() runs it for the merge backend once the
     +    sequencer has returned successfully and removed its state directory,
     +    which it keeps while the rebase is stopped. run_sequencer() runs it
     +    for cherry-pick and revert when a pick, a "--continue" or a "--skip"
     +    returns successfully.
     +
     +    For the user, a sequence that never stops now runs auto maintenance
     +    once when it is done, where it never ran it before. That is the same
     +    "git maintenance run --auto --detach" as after "git commit": it
     +    detaches into the background by default and does nothing unless one
     +    of its tasks is due. The runs from the commands a sequence spawns
     +    stay for now. The next commit removes them, so that a sequence runs
     +    auto maintenance exactly once.
      
          Assisted-by: Claude Fable 5.1
          Signed-off-by: Thomas Bachem <mail@thomasbachem.com>
      
     - ## sequencer.c ##
     -@@ sequencer.c: cleanup_head_ref:
     - 			return -1;
     - 	}
     + ## builtin/rebase.c ##
     +@@ builtin/rebase.c: static int run_specific_rebase(struct rebase_options *opts)
       
     -+	/*
     -+	 * We ignore errors in 'git maintenance run --auto', since the
     -+	 * user should see them.
     -+	 */
     -+	run_auto_maintenance(r, opts->quiet);
     + 	if (opts->dont_finish_rebase)
     + 		; /* do nothing */
     +-	else if (opts->type == REBASE_MERGE)
     +-		; /* merge backend cleans up after itself */
     +-	else if (status == 0) {
     ++	else if (opts->type == REBASE_MERGE) {
     ++		int quiet = !(opts->flags & (REBASE_NO_QUIET|REBASE_VERBOSE));
      +
     - 	/*
     - 	 * Sequence of picks finished successfully; cleanup by
     - 	 * removing the .git/sequencer directory
     -@@ sequencer.c: int sequencer_continue(struct repository *r, struct replay_opts *opts)
     - 			res = -1;
     - 			goto release_todo_list;
     - 		}
     --	} else if (!file_exists(get_todo_path(opts)))
     --		return continue_single_pick(r, opts);
     --	else if ((res = read_populate_todo(r, &todo_list, opts)))
     -+	} else if (!file_exists(get_todo_path(opts))) {
     -+		res = continue_single_pick(r, opts);
     -+		if (!res)
     -+			run_auto_maintenance(r, opts->quiet);
     -+		return res;
     -+	} else if ((res = read_populate_todo(r, &todo_list, opts))) {
     - 		goto release_todo_list;
     -+	}
     ++		/*
     ++		 * The sequencer cleans up after itself. Its state directory
     ++		 * is gone once it is done, and stays while it is stopped.
     ++		 */
     ++		if (status == 0 && !is_directory(opts->state_dir))
     ++			run_auto_maintenance(the_repository, quiet);
     ++	} else if (status == 0) {
     + 		if (!file_exists(state_dir_path("stopped-sha", opts)))
     + 			finish_rebase(opts);
     + 	} else if (status == 2) {
     +
     + ## builtin/revert.c ##
     +@@
     + #include "gettext.h"
     + #include "revision.h"
     + #include "rerere.h"
     ++#include "run-command.h"
     + #include "sequencer.h"
     + #include "branch.h"
       
     - 	if (!is_rebase_i(opts)) {
     - 		/* Verify that the conflict has been resolved */
     -@@ sequencer.c: int sequencer_pick_revisions(struct repository *r,
     - 			BUG("unexpected extra commit from walk");
     +@@ builtin/revert.c: static int run_sequencer(int argc, const char **argv, const char *prefix,
     + 	const char *strategy = &sentinel_value;
     + 	const char *gpg_sign = &sentinel_value;
     + 	enum empty_action empty_opt = EMPTY_COMMIT_UNSPECIFIED;
     +-	int cmd = 0;
     ++	int cmd = 0, ret;
     + 	struct option base_options[] = {
     + 		OPT_CMDMODE(0, "quit", &cmd, N_("end revert or cherry-pick sequence"), 'q'),
     + 		OPT_CMDMODE(0, "continue", &cmd, N_("resume revert or cherry-pick sequence"), 'c'),
     +@@ builtin/revert.c: static int run_sequencer(int argc, const char **argv, const char *prefix,
     + 	free(options);
       
     - 		res = single_pick(r, cmit, opts);
     -+		if (!res)
     -+			run_auto_maintenance(r, opts->quiet);
     - 		goto out;
     + 	if (cmd == 'q') {
     +-		int ret = sequencer_remove_state(opts);
     ++		ret = sequencer_remove_state(opts);
     + 		if (!ret)
     + 			remove_branch_state(the_repository, 0);
     + 		return ret;
       	}
     +-	if (cmd == 'c')
     +-		return sequencer_continue(the_repository, opts);
     + 	if (cmd == 'a')
     + 		return sequencer_rollback(the_repository, opts);
     +-	if (cmd == 's')
     +-		return sequencer_skip(the_repository, opts);
     +-	return sequencer_pick_revisions(the_repository, opts);
     ++	if (cmd == 'c')
     ++		ret = sequencer_continue(the_repository, opts);
     ++	else if (cmd == 's')
     ++		ret = sequencer_skip(the_repository, opts);
     ++	else
     ++		ret = sequencer_pick_revisions(the_repository, opts);
     ++	if (!ret)
     ++		run_auto_maintenance(the_repository, opts->quiet);
     ++	return ret;
     + }
       
     + int cmd_revert(int argc,
      
       ## t/t3418-rebase-continue.sh ##
      @@ t/t3418-rebase-continue.sh: test_orig_head () {
       test_orig_head --apply
       test_orig_head --merge
       
     -+test_expect_success 'rebase runs auto maintenance at its end' '
     -+	git checkout -b one-exec main^ &&
     -+	test_commit F4 &&
     -+	test_must_fail git rebase -x false main &&
     -+	GIT_TRACE2_EVENT="$(pwd)/finish.txt" git rebase --continue &&
     -+	test_subcommand_flex git maintenance run --auto <finish.txt
     ++test_expect_success 'rebase runs auto maintenance once it is done' '
     ++	git checkout -b auto-maintenance topic &&
     ++	test_must_fail env GIT_TRACE2_EVENT="$(pwd)/stop.txt" \
     ++		git rebase -x false main &&
     ++	test_subcommand_flex ! git maintenance run --auto <stop.txt &&
     ++	echo resolved >F2 &&
     ++	git add F2 &&
     ++	test_must_fail git rebase --continue &&
     ++	GIT_TRACE2_EVENT="$(pwd)/end.txt" git rebase --continue &&
     ++	test_subcommand_flex git maintenance run --auto <end.txt
      +'
      +
       test_done
     @@ t/t3510-cherry-pick-sequence.sh: test_expect_success 'commit descriptions in ins
      +	test_subcommand_flex git maintenance run --auto <single.txt &&
      +	GIT_TRACE2_EVENT="$(pwd)/sequence.txt" \
      +		git cherry-pick anotherpick yetanotherpick &&
     ++	test_subcommand_flex git maintenance run --auto <sequence.txt &&
      +	grep "\"child_start\".*\"maintenance\"" sequence.txt >maintenance &&
      +	test_line_count = 1 maintenance
      +'
     ++
     ++test_expect_success 'cherry-pick runs auto maintenance once a stopped sequence is done' '
     ++	pristine_detach initial &&
     ++	test_must_fail env GIT_TRACE2_EVENT="$(pwd)/stop.txt" \
     ++		git cherry-pick base..anotherpick &&
     ++	test_subcommand_flex ! git maintenance run --auto <stop.txt &&
     ++	echo resolved >foo &&
     ++	git add foo &&
     ++	test_must_fail git cherry-pick --continue &&
     ++	GIT_TRACE2_EVENT="$(pwd)/end.txt" git cherry-pick --skip &&
     ++	test_subcommand_flex git maintenance run --auto <end.txt
     ++'
      +
       test_done
 3:  9a6fc0427a ! 3:  7a353df3d9 sequencer: keep auto maintenance out of the commands a sequence spawns
     @@ Metadata
      Author: Thomas Bachem <mail@thomasbachem.com>
      
       ## Commit message ##
     -    sequencer: keep auto maintenance out of the commands a sequence spawns
     +    sequencer: disable auto maintenance in spawned commands
      
     -    The "git commit" and "git merge" the sequencer spawns, and the git
     -    commands an exec runs, each start "git maintenance run --auto
     -    --detach", which then works in the background against the sequence
     -    itself. A "rerere gc" started by the commit of one "git rebase
     -    --continue" holds MERGE_RR.lock when the next pick needs it, and a
     -    repack deletes packs the sequencer still has open, which 65cda10d5b
     -    (sequencer: release the ODB before spawning git commit, 2026-08-12)
     -    had to work around.
     +    The "git commit" and "git merge" the sequencer spawns run "git
     +    maintenance run --auto --detach" as they finish, and so does any
     +    such command an exec runs. That maintenance then works in the
     +    background while the sequencer goes on with the sequence, and the
     +    two get in each other's way. With rerere enabled, the maintenance
     +    started by the "git commit" of a "git rebase --continue" runs
     +    "rerere gc", which can still hold MERGE_RR.lock when the next pick
     +    conflicts. The rebase then dies with "Unable to create
     +    '.../MERGE_RR.lock': File exists" instead of stopping for the user
     +    to resolve the conflict. And a repack can delete a pack the
     +    sequencer still has open, which 65cda10d5b (sequencer: release the
     +    ODB before spawning git commit, 2026-08-12) works around.
      
     -    The loose objects a sequence creates wait for the run at its end that
     -    the previous commit added. Whether a sequence can be long enough to
     -    suffer from them before that remains to be seen. Pass
     -    maintenance.auto=false and gc.auto=0 to the spawned commands through
     -    GIT_CONFIG_PARAMETERS, which the shell of an exec command hands on to
     -    whatever it runs, appended after the user's own -c settings so that
     -    ours win, and built once per run. A command the user runs while the
     -    sequence is stopped, like "git commit --amend" at an edit, is not the
     -    sequencer's to control and still runs maintenance.
     +    Pass maintenance.auto=false to these commands through
     +    GIT_CONFIG_PARAMETERS, as "git -c" would. We build the value once
     +    from the one we inherited and append our setting after the user's
     +    own -c settings so that it wins. The environment also reaches
     +    everything the command spawns in turn, so a git command run from an
     +    exec is covered as well. The sequencer also spawns "git stash", "git
     +    reset" and "git notes", which never run auto maintenance.
     +
     +    With the previous commit, rebase, cherry-pick and revert run auto
     +    maintenance once when they are done, so a sequence now runs it
     +    exactly once, at the end. A sequence that stops for conflicts used
     +    to run it at every resolution and now piles up its loose objects
     +    until the end, as a sequence without conflicts always has.
     +
     +    A command the user runs while the sequence is stopped, like "git
     +    commit --amend" at an edit, still runs auto maintenance. The
     +    sequencer does not spawn it and has no say in it.
      
          Assisted-by: Claude Fable 5.1
          Signed-off-by: Thomas Bachem <mail@thomasbachem.com>
     @@ sequencer.c: struct replay_ctx {
       	 */
       	unsigned have_message :1;
      +	/*
     -+	 * The GIT_CONFIG_PARAMETERS value that keeps auto maintenance out
     -+	 * of the commands we spawn, built on first use.
     ++	 * GIT_CONFIG_PARAMETERS for the commands we spawn, with auto
     ++	 * maintenance turned off. Built on first use.
      +	 */
     -+	struct strbuf config_parameters;
     ++	char *config_parameters;
       };
       
       struct replay_ctx* replay_ctx_new(void)
     -@@ sequencer.c: struct replay_ctx* replay_ctx_new(void)
     - 
     - 	strbuf_init(&ctx->current_fixups, 0);
     - 	strbuf_init(&ctx->message, 0);
     -+	strbuf_init(&ctx->config_parameters, 0);
     - 
     - 	return ctx;
     - }
      @@ sequencer.c: static void replay_ctx_release(struct replay_ctx *ctx)
       {
       	strbuf_release(&ctx->current_fixups);
       	strbuf_release(&ctx->message);
     -+	strbuf_release(&ctx->config_parameters);
     ++	free(ctx->config_parameters);
       }
       
       void replay_opts_release(struct replay_opts *opts)
     @@ sequencer.c: static int run_command_silent_on_success(struct child_process *cmd)
       }
       
      +/*
     -+ * A sequence runs auto maintenance once it is done, not from every command
     -+ * it spawns along the way: their background "rerere gc" or repack would
     -+ * race the sequencer for locks and files it still holds.
     ++ * Don't let the commands we spawn run auto maintenance. It would race
     ++ * us for MERGE_RR.lock or delete packs we still have open. Our caller
     ++ * runs it once the sequence is done.
      + */
      +static void disable_auto_maintenance(struct replay_opts *opts,
      +				     struct child_process *cmd)
      +{
     -+	struct strbuf *params = &opts->ctx->config_parameters;
     -+
     -+	if (!params->len) {
     ++	if (!opts->ctx->config_parameters) {
      +		const char *old = getenv(CONFIG_DATA_ENVIRONMENT);
     ++		struct strbuf buf = STRBUF_INIT;
      +
      +		if (old && *old)
     -+			strbuf_addstr(params, old);
     -+		git_config_append_parameter(params, "maintenance.auto", "false");
     -+		git_config_append_parameter(params, "gc.auto", "0");
     ++			strbuf_addstr(&buf, old);
     ++		git_config_append_parameter(&buf, "maintenance.auto", "false");
     ++		opts->ctx->config_parameters = strbuf_detach(&buf, NULL);
      +	}
     -+	strvec_pushf(&cmd->env, "%s=%s", CONFIG_DATA_ENVIRONMENT, params->buf);
     ++	strvec_pushf(&cmd->env, "%s=%s", CONFIG_DATA_ENVIRONMENT,
     ++		     opts->ctx->config_parameters);
      +}
      +
       /*
     @@ sequencer.c: static int continue_single_pick(struct repository *r, struct replay
       	/*
      
       ## t/t3418-rebase-continue.sh ##
     -@@ t/t3418-rebase-continue.sh: test_expect_success 'rebase runs auto maintenance at its end' '
     - 	test_subcommand_flex git maintenance run --auto <finish.txt
     - '
     - 
     -+test_expect_success 'rebase spawns no auto maintenance before its end' '
     -+	git checkout -b two-conflicts topic &&
     -+	test_commit F2-again F2 222 &&
     -+	test_must_fail git rebase -x "git commit --allow-empty -m exec" main &&
     -+	echo resolved >F2 &&
     -+	git add F2 &&
     +@@ t/t3418-rebase-continue.sh: test_orig_head --merge
     + test_expect_success 'rebase runs auto maintenance once it is done' '
     + 	git checkout -b auto-maintenance topic &&
     + 	test_must_fail env GIT_TRACE2_EVENT="$(pwd)/stop.txt" \
     +-		git rebase -x false main &&
     ++		git rebase -x "git commit --allow-empty -m exec && false" main &&
     + 	test_subcommand_flex ! git maintenance run --auto <stop.txt &&
     + 	echo resolved >F2 &&
     + 	git add F2 &&
     +-	test_must_fail git rebase --continue &&
      +	test_must_fail env GIT_TRACE2_EVENT="$(pwd)/mid.txt" \
      +		git rebase --continue &&
      +	test_subcommand_flex git commit <mid.txt &&
      +	test_subcommand_flex ! git maintenance run --auto <mid.txt &&
     -+	echo resolved >F2 &&
     -+	git add F2 &&
     -+	GIT_TRACE2_EVENT="$(pwd)/end.txt" git rebase --continue &&
     + 	GIT_TRACE2_EVENT="$(pwd)/end.txt" git rebase --continue &&
     +-	test_subcommand_flex git maintenance run --auto <end.txt
      +	test_subcommand_flex git maintenance run --auto <end.txt &&
      +	grep "\"child_start\".*\"maintenance\"" end.txt >maintenance &&
      +	test_line_count = 1 maintenance
     -+'
     -+
     + '
     + 
       test_done
      
       ## t/t3510-cherry-pick-sequence.sh ##
     -@@ t/t3510-cherry-pick-sequence.sh: test_expect_success 'cherry-pick runs auto maintenance once it is done' '
     - 	test_line_count = 1 maintenance
     - '
     - 
     -+test_expect_success 'cherry-pick spawns no auto maintenance before it is done' '
     -+	pristine_detach initial &&
     -+	test_must_fail git cherry-pick base..anotherpick &&
     -+	echo resolved >foo &&
     -+	git add foo &&
     +@@ t/t3510-cherry-pick-sequence.sh: test_expect_success 'commit descriptions in insn sheet are optional' '
     + 
     + test_expect_success 'cherry-pick runs auto maintenance once it is done' '
     + 	pristine_detach base &&
     +-	GIT_TRACE2_EVENT="$(pwd)/single.txt" git cherry-pick picked &&
     ++	GIT_TRACE2_EVENT="$(pwd)/single.txt" git cherry-pick --edit picked &&
     ++	test_subcommand_flex git commit <single.txt &&
     + 	test_subcommand_flex git maintenance run --auto <single.txt &&
     ++	grep "\"child_start\".*\"maintenance\"" single.txt >maintenance &&
     ++	test_line_count = 1 maintenance &&
     + 	GIT_TRACE2_EVENT="$(pwd)/sequence.txt" \
     + 		git cherry-pick anotherpick yetanotherpick &&
     + 	test_subcommand_flex git maintenance run --auto <sequence.txt &&
     +@@ t/t3510-cherry-pick-sequence.sh: test_expect_success 'cherry-pick runs auto maintenance once a stopped sequence i
     + 	test_subcommand_flex ! git maintenance run --auto <stop.txt &&
     + 	echo resolved >foo &&
     + 	git add foo &&
     +-	test_must_fail git cherry-pick --continue &&
      +	test_must_fail env GIT_TRACE2_EVENT="$(pwd)/mid.txt" \
      +		git cherry-pick --continue &&
      +	test_subcommand_flex git commit <mid.txt &&
      +	test_subcommand_flex ! git maintenance run --auto <mid.txt &&
     -+	echo d >foo &&
     -+	git add foo &&
     -+	GIT_TRACE2_EVENT="$(pwd)/end.txt" git cherry-pick --continue &&
     -+	test_subcommand_flex git commit <end.txt &&
     + 	GIT_TRACE2_EVENT="$(pwd)/end.txt" git cherry-pick --skip &&
     +-	test_subcommand_flex git maintenance run --auto <end.txt
     ++	test_subcommand_flex git maintenance run --auto <end.txt &&
      +	grep "\"child_start\".*\"maintenance\"" end.txt >maintenance &&
      +	test_line_count = 1 maintenance
     -+'
     -+
     + '
     + 
       test_done

-- 
gitgitgadget

[PATCH v3 1/3] config: add git_config_append_parameter()

[Thomas Bachem via GitGitGadget]

From: Thomas Bachem <mail@thomasbachem.com>

"git -c key=value" passes its settings on to the git commands it
spawns through the environment variable GIT_CONFIG_PARAMETERS. The
value is a space separated list of 'key'='value' pairs with both
sides single quoted, which git_config_from_parameters() reads back in
the child. The only place we write such an entry is
git_config_push_split_parameter(), and it writes straight into our
own environment.

Split the formatting out into git_config_append_parameter(), which
appends one entry to a strbuf, so that we can build such a value for
a child's environment without repeating the quoting. The sequencer
will use it in a later commit to pass settings to the commands it
spawns.

Assisted-by: Claude Fable 5.1
Signed-off-by: Thomas Bachem <mail@thomasbachem.com>
---
 config.c | 20 +++++++++++++-------
 config.h | 13 +++++++++++++
 2 files changed, 26 insertions(+), 7 deletions(-)

diff --git a/config.c b/config.c
index d9019e7e6c..e0bb29b53d 100644
--- a/config.c
+++ b/config.c
@@ -450,18 +450,24 @@ static int git_config_include(const char *var, const char *value,
 	return ret;
 }
 
+void git_config_append_parameter(struct strbuf *env, const char *key,
+				 const char *value)
+{
+	if (env->len)
+		strbuf_addch(env, ' ');
+	sq_quote_buf(env, key);
+	strbuf_addch(env, '=');
+	if (value)
+		sq_quote_buf(env, value);
+}
+
 static void git_config_push_split_parameter(const char *key, const char *value)
 {
 	struct strbuf env = STRBUF_INIT;
 	const char *old = getenv(CONFIG_DATA_ENVIRONMENT);
-	if (old && *old) {
+	if (old && *old)
 		strbuf_addstr(&env, old);
-		strbuf_addch(&env, ' ');
-	}
-	sq_quote_buf(&env, key);
-	strbuf_addch(&env, '=');
-	if (value)
-		sq_quote_buf(&env, value);
+	git_config_append_parameter(&env, key, value);
 	setenv(CONFIG_DATA_ENVIRONMENT, env.buf, 1);
 	strbuf_release(&env);
 }
diff --git a/config.h b/config.h
index b66dd08007..838d1509a9 100644
--- a/config.h
+++ b/config.h
@@ -22,6 +22,7 @@
  */
 
 struct object_id;
+struct strbuf;
 
 /* git_config_parse_key() returns these negated: */
 #define CONFIG_INVALID_KEY 1
@@ -186,6 +187,18 @@ int git_config_from_blob_oid(config_fn_t fn, const char *name,
 			     enum config_scope scope);
 void git_config_push_parameter(const char *text);
 void git_config_push_env(const char *spec);
+
+/*
+ * Append a "-c key=value" setting to a GIT_CONFIG_PARAMETERS value in
+ * `env`. The variable carries such settings from a git process to the
+ * git commands it spawns, as a space separated list of 'key'='value'
+ * pairs with both sides single quoted, which git_config_from_parameters()
+ * reads back. A NULL `value` appends 'key'= with nothing after the equals
+ * sign, which stands for a boolean true, like "-c key" on the command
+ * line.
+ */
+void git_config_append_parameter(struct strbuf *env, const char *key,
+				 const char *value);
 int git_config_from_parameters(config_fn_t fn, void *data);
 
 /*
-- 
gitgitgadget

[PATCH v3 2/3] rebase, cherry-pick, revert: run auto maintenance when done

[Thomas Bachem via GitGitGadget]

From: Thomas Bachem <mail@thomasbachem.com>

"git commit", "git merge", "git fetch" and "git am" run "git
maintenance run --auto" when they are done, and so does the apply
backend of "git rebase". That repacks the loose objects they wrote
once there are enough of them, expires old rerere entries and does
whatever other housekeeping is due.

The merge backend of "git rebase", "git cherry-pick" and "git revert"
do not. They create their commits in process, so auto maintenance
runs only when they spawn a command that runs it on its own. That is
the "git commit" for a resolved conflict or an edited message, the
"git merge" that "--rebase-merges" spawns for an octopus merge, a
strategy other than ort or any strategy option, and whatever an exec
runs. A sequence that needs none of these never runs auto
maintenance. One that stops for conflicts runs it after each
resolution, in the middle of the sequence.

Run it once when the sequence is done, like the apply backend does.

The apply backend leaves that to builtin/rebase.c: "git am" skips
auto maintenance in rebasing mode, and finish_rebase() runs it once
the patches are applied. Do the same for the sequencer, from
builtin/rebase.c and builtin/revert.c, because the sequencer itself
has no single place where every sequence ends. A sequence of several
commits ends inside pick_commits(). A single cherry-pick or revert
never creates the sequencer's state directory and returns to its
caller as soon as its commit is made. "--continue" and "--skip" have
entry points of their own. Nothing but those two builtins starts or
continues a sequence, so that is where we run auto maintenance.
run_specific_rebase() runs it for the merge backend once the
sequencer has returned successfully and removed its state directory,
which it keeps while the rebase is stopped. run_sequencer() runs it
for cherry-pick and revert when a pick, a "--continue" or a "--skip"
returns successfully.

For the user, a sequence that never stops now runs auto maintenance
once when it is done, where it never ran it before. That is the same
"git maintenance run --auto --detach" as after "git commit": it
detaches into the background by default and does nothing unless one
of its tasks is due. The runs from the commands a sequence spawns
stay for now. The next commit removes them, so that a sequence runs
auto maintenance exactly once.

Assisted-by: Claude Fable 5.1
Signed-off-by: Thomas Bachem <mail@thomasbachem.com>
---
 builtin/rebase.c                | 13 ++++++++++---
 builtin/revert.c                | 19 ++++++++++++-------
 t/t3418-rebase-continue.sh      | 12 ++++++++++++
 t/t3510-cherry-pick-sequence.sh | 23 +++++++++++++++++++++++
 4 files changed, 57 insertions(+), 10 deletions(-)

diff --git a/builtin/rebase.c b/builtin/rebase.c
index 10a306310c..535db60181 100644
--- a/builtin/rebase.c
+++ b/builtin/rebase.c
@@ -762,9 +762,16 @@ static int run_specific_rebase(struct rebase_options *opts)
 
 	if (opts->dont_finish_rebase)
 		; /* do nothing */
-	else if (opts->type == REBASE_MERGE)
-		; /* merge backend cleans up after itself */
-	else if (status == 0) {
+	else if (opts->type == REBASE_MERGE) {
+		int quiet = !(opts->flags & (REBASE_NO_QUIET|REBASE_VERBOSE));
+
+		/*
+		 * The sequencer cleans up after itself. Its state directory
+		 * is gone once it is done, and stays while it is stopped.
+		 */
+		if (status == 0 && !is_directory(opts->state_dir))
+			run_auto_maintenance(the_repository, quiet);
+	} else if (status == 0) {
 		if (!file_exists(state_dir_path("stopped-sha", opts)))
 			finish_rebase(opts);
 	} else if (status == 2) {
diff --git a/builtin/revert.c b/builtin/revert.c
index bedc40f368..52100a20cb 100644
--- a/builtin/revert.c
+++ b/builtin/revert.c
@@ -8,6 +8,7 @@
 #include "gettext.h"
 #include "revision.h"
 #include "rerere.h"
+#include "run-command.h"
 #include "sequencer.h"
 #include "branch.h"
 
@@ -116,7 +117,7 @@ static int run_sequencer(int argc, const char **argv, const char *prefix,
 	const char *strategy = &sentinel_value;
 	const char *gpg_sign = &sentinel_value;
 	enum empty_action empty_opt = EMPTY_COMMIT_UNSPECIFIED;
-	int cmd = 0;
+	int cmd = 0, ret;
 	struct option base_options[] = {
 		OPT_CMDMODE(0, "quit", &cmd, N_("end revert or cherry-pick sequence"), 'q'),
 		OPT_CMDMODE(0, "continue", &cmd, N_("resume revert or cherry-pick sequence"), 'c'),
@@ -264,18 +265,22 @@ static int run_sequencer(int argc, const char **argv, const char *prefix,
 	free(options);
 
 	if (cmd == 'q') {
-		int ret = sequencer_remove_state(opts);
+		ret = sequencer_remove_state(opts);
 		if (!ret)
 			remove_branch_state(the_repository, 0);
 		return ret;
 	}
-	if (cmd == 'c')
-		return sequencer_continue(the_repository, opts);
 	if (cmd == 'a')
 		return sequencer_rollback(the_repository, opts);
-	if (cmd == 's')
-		return sequencer_skip(the_repository, opts);
-	return sequencer_pick_revisions(the_repository, opts);
+	if (cmd == 'c')
+		ret = sequencer_continue(the_repository, opts);
+	else if (cmd == 's')
+		ret = sequencer_skip(the_repository, opts);
+	else
+		ret = sequencer_pick_revisions(the_repository, opts);
+	if (!ret)
+		run_auto_maintenance(the_repository, opts->quiet);
+	return ret;
 }
 
 int cmd_revert(int argc,
diff --git a/t/t3418-rebase-continue.sh b/t/t3418-rebase-continue.sh
index cb5c3a1cb5..025787b5f2 100755
--- a/t/t3418-rebase-continue.sh
+++ b/t/t3418-rebase-continue.sh
@@ -395,4 +395,16 @@ test_orig_head () {
 test_orig_head --apply
 test_orig_head --merge
 
+test_expect_success 'rebase runs auto maintenance once it is done' '
+	git checkout -b auto-maintenance topic &&
+	test_must_fail env GIT_TRACE2_EVENT="$(pwd)/stop.txt" \
+		git rebase -x false main &&
+	test_subcommand_flex ! git maintenance run --auto <stop.txt &&
+	echo resolved >F2 &&
+	git add F2 &&
+	test_must_fail git rebase --continue &&
+	GIT_TRACE2_EVENT="$(pwd)/end.txt" git rebase --continue &&
+	test_subcommand_flex git maintenance run --auto <end.txt
+'
+
 test_done
diff --git a/t/t3510-cherry-pick-sequence.sh b/t/t3510-cherry-pick-sequence.sh
index 5777dff496..2bea55c3b6 100755
--- a/t/t3510-cherry-pick-sequence.sh
+++ b/t/t3510-cherry-pick-sequence.sh
@@ -721,4 +721,27 @@ test_expect_success 'commit descriptions in insn sheet are optional' '
 	test_line_count = 4 commits
 '
 
+test_expect_success 'cherry-pick runs auto maintenance once it is done' '
+	pristine_detach base &&
+	GIT_TRACE2_EVENT="$(pwd)/single.txt" git cherry-pick picked &&
+	test_subcommand_flex git maintenance run --auto <single.txt &&
+	GIT_TRACE2_EVENT="$(pwd)/sequence.txt" \
+		git cherry-pick anotherpick yetanotherpick &&
+	test_subcommand_flex git maintenance run --auto <sequence.txt &&
+	grep "\"child_start\".*\"maintenance\"" sequence.txt >maintenance &&
+	test_line_count = 1 maintenance
+'
+
+test_expect_success 'cherry-pick runs auto maintenance once a stopped sequence is done' '
+	pristine_detach initial &&
+	test_must_fail env GIT_TRACE2_EVENT="$(pwd)/stop.txt" \
+		git cherry-pick base..anotherpick &&
+	test_subcommand_flex ! git maintenance run --auto <stop.txt &&
+	echo resolved >foo &&
+	git add foo &&
+	test_must_fail git cherry-pick --continue &&
+	GIT_TRACE2_EVENT="$(pwd)/end.txt" git cherry-pick --skip &&
+	test_subcommand_flex git maintenance run --auto <end.txt
+'
+
 test_done
-- 
gitgitgadget

[PATCH v3 3/3] sequencer: disable auto maintenance in spawned commands

[Thomas Bachem via GitGitGadget]

From: Thomas Bachem <mail@thomasbachem.com>

The "git commit" and "git merge" the sequencer spawns run "git
maintenance run --auto --detach" as they finish, and so does any
such command an exec runs. That maintenance then works in the
background while the sequencer goes on with the sequence, and the
two get in each other's way. With rerere enabled, the maintenance
started by the "git commit" of a "git rebase --continue" runs
"rerere gc", which can still hold MERGE_RR.lock when the next pick
conflicts. The rebase then dies with "Unable to create
'.../MERGE_RR.lock': File exists" instead of stopping for the user
to resolve the conflict. And a repack can delete a pack the
sequencer still has open, which 65cda10d5b (sequencer: release the
ODB before spawning git commit, 2026-08-12) works around.

Pass maintenance.auto=false to these commands through
GIT_CONFIG_PARAMETERS, as "git -c" would. We build the value once
from the one we inherited and append our setting after the user's
own -c settings so that it wins. The environment also reaches
everything the command spawns in turn, so a git command run from an
exec is covered as well. The sequencer also spawns "git stash", "git
reset" and "git notes", which never run auto maintenance.

With the previous commit, rebase, cherry-pick and revert run auto
maintenance once when they are done, so a sequence now runs it
exactly once, at the end. A sequence that stops for conflicts used
to run it at every resolution and now piles up its loose objects
until the end, as a sequence without conflicts always has.

A command the user runs while the sequence is stopped, like "git
commit --amend" at an edit, still runs auto maintenance. The
sequencer does not spawn it and has no say in it.

Assisted-by: Claude Fable 5.1
Signed-off-by: Thomas Bachem <mail@thomasbachem.com>
---
 sequencer.c                     | 38 ++++++++++++++++++++++++++++++---
 t/t3418-rebase-continue.sh      | 11 +++++++---
 t/t3510-cherry-pick-sequence.sh | 14 +++++++++---
 3 files changed, 54 insertions(+), 9 deletions(-)

diff --git a/sequencer.c b/sequencer.c
index 65afd100d9..e99ef09f02 100644
--- a/sequencer.c
+++ b/sequencer.c
@@ -234,6 +234,11 @@ struct replay_ctx {
 	 * Whether message contains a commit message.
 	 */
 	unsigned have_message :1;
+	/*
+	 * GIT_CONFIG_PARAMETERS for the commands we spawn, with auto
+	 * maintenance turned off. Built on first use.
+	 */
+	char *config_parameters;
 };
 
 struct replay_ctx* replay_ctx_new(void)
@@ -407,6 +412,7 @@ static void replay_ctx_release(struct replay_ctx *ctx)
 {
 	strbuf_release(&ctx->current_fixups);
 	strbuf_release(&ctx->message);
+	free(ctx->config_parameters);
 }
 
 void replay_opts_release(struct replay_opts *opts)
@@ -1107,6 +1113,27 @@ static int run_command_silent_on_success(struct child_process *cmd)
 	return rc;
 }
 
+/*
+ * Don't let the commands we spawn run auto maintenance. It would race
+ * us for MERGE_RR.lock or delete packs we still have open. Our caller
+ * runs it once the sequence is done.
+ */
+static void disable_auto_maintenance(struct replay_opts *opts,
+				     struct child_process *cmd)
+{
+	if (!opts->ctx->config_parameters) {
+		const char *old = getenv(CONFIG_DATA_ENVIRONMENT);
+		struct strbuf buf = STRBUF_INIT;
+
+		if (old && *old)
+			strbuf_addstr(&buf, old);
+		git_config_append_parameter(&buf, "maintenance.auto", "false");
+		opts->ctx->config_parameters = strbuf_detach(&buf, NULL);
+	}
+	strvec_pushf(&cmd->env, "%s=%s", CONFIG_DATA_ENVIRONMENT,
+		     opts->ctx->config_parameters);
+}
+
 /*
  * If we are cherry-pick, and if the merge did not result in
  * hand-editing, we will hit this commit and inherit the original
@@ -1148,6 +1175,7 @@ static int run_git_commit(const char *defmsg,
 			     author_date_from_env(&cmd.env));
 	if (opts->ignore_date)
 		strvec_push(&cmd.env, "GIT_AUTHOR_DATE=");
+	disable_auto_maintenance(opts, &cmd);
 
 	strvec_push(&cmd.args, "commit");
 
@@ -3924,16 +3952,18 @@ static int error_failed_squash(struct repository *r,
 	return error_with_patch(r, commit, subject, subject_len, opts, 1, 1);
 }
 
-static int do_exec(struct repository *r, const char *command_line, int quiet)
+static int do_exec(struct repository *r, const char *command_line,
+		   struct replay_opts *opts)
 {
 	struct child_process cmd = CHILD_PROCESS_INIT;
 	int dirty, status;
 
-	if (!quiet)
+	if (!opts->quiet)
 		fprintf(stderr, _("Executing: %s\n"), command_line);
 	cmd.use_shell = 1;
 	strvec_push(&cmd.args, command_line);
 	strvec_push(&cmd.env, "GIT_CHERRY_PICK_HELP");
+	disable_auto_maintenance(opts, &cmd);
 	status = run_command(&cmd);
 
 	/* force re-reading of the cache */
@@ -4342,6 +4372,7 @@ static int do_merge(struct repository *r,
 				     author_date_from_env(&cmd.env));
 		if (opts->ignore_date)
 			strvec_push(&cmd.env, "GIT_AUTHOR_DATE=");
+		disable_auto_maintenance(opts, &cmd);
 
 		cmd.git_cmd = 1;
 		strvec_push(&cmd.args, "merge");
@@ -5158,7 +5189,7 @@ static int pick_commits(struct repository *r,
 			if (!opts->verbose)
 				term_clear_line();
 			*end_of_arg = '\0';
-			res = do_exec(r, arg, opts->quiet);
+			res = do_exec(r, arg, opts);
 			*end_of_arg = saved;
 
 			if (res) {
@@ -5329,6 +5360,7 @@ static int continue_single_pick(struct repository *r, struct replay_opts *opts)
 		return error(_("no cherry-pick or revert in progress"));
 
 	cmd.git_cmd = 1;
+	disable_auto_maintenance(opts, &cmd);
 	strvec_push(&cmd.args, "commit");
 
 	/*
diff --git a/t/t3418-rebase-continue.sh b/t/t3418-rebase-continue.sh
index 025787b5f2..16def261b0 100755
--- a/t/t3418-rebase-continue.sh
+++ b/t/t3418-rebase-continue.sh
@@ -398,13 +398,18 @@ test_orig_head --merge
 test_expect_success 'rebase runs auto maintenance once it is done' '
 	git checkout -b auto-maintenance topic &&
 	test_must_fail env GIT_TRACE2_EVENT="$(pwd)/stop.txt" \
-		git rebase -x false main &&
+		git rebase -x "git commit --allow-empty -m exec && false" main &&
 	test_subcommand_flex ! git maintenance run --auto <stop.txt &&
 	echo resolved >F2 &&
 	git add F2 &&
-	test_must_fail git rebase --continue &&
+	test_must_fail env GIT_TRACE2_EVENT="$(pwd)/mid.txt" \
+		git rebase --continue &&
+	test_subcommand_flex git commit <mid.txt &&
+	test_subcommand_flex ! git maintenance run --auto <mid.txt &&
 	GIT_TRACE2_EVENT="$(pwd)/end.txt" git rebase --continue &&
-	test_subcommand_flex git maintenance run --auto <end.txt
+	test_subcommand_flex git maintenance run --auto <end.txt &&
+	grep "\"child_start\".*\"maintenance\"" end.txt >maintenance &&
+	test_line_count = 1 maintenance
 '
 
 test_done
diff --git a/t/t3510-cherry-pick-sequence.sh b/t/t3510-cherry-pick-sequence.sh
index 2bea55c3b6..1e3fa1803c 100755
--- a/t/t3510-cherry-pick-sequence.sh
+++ b/t/t3510-cherry-pick-sequence.sh
@@ -723,8 +723,11 @@ test_expect_success 'commit descriptions in insn sheet are optional' '
 
 test_expect_success 'cherry-pick runs auto maintenance once it is done' '
 	pristine_detach base &&
-	GIT_TRACE2_EVENT="$(pwd)/single.txt" git cherry-pick picked &&
+	GIT_TRACE2_EVENT="$(pwd)/single.txt" git cherry-pick --edit picked &&
+	test_subcommand_flex git commit <single.txt &&
 	test_subcommand_flex git maintenance run --auto <single.txt &&
+	grep "\"child_start\".*\"maintenance\"" single.txt >maintenance &&
+	test_line_count = 1 maintenance &&
 	GIT_TRACE2_EVENT="$(pwd)/sequence.txt" \
 		git cherry-pick anotherpick yetanotherpick &&
 	test_subcommand_flex git maintenance run --auto <sequence.txt &&
@@ -739,9 +742,14 @@ test_expect_success 'cherry-pick runs auto maintenance once a stopped sequence i
 	test_subcommand_flex ! git maintenance run --auto <stop.txt &&
 	echo resolved >foo &&
 	git add foo &&
-	test_must_fail git cherry-pick --continue &&
+	test_must_fail env GIT_TRACE2_EVENT="$(pwd)/mid.txt" \
+		git cherry-pick --continue &&
+	test_subcommand_flex git commit <mid.txt &&
+	test_subcommand_flex ! git maintenance run --auto <mid.txt &&
 	GIT_TRACE2_EVENT="$(pwd)/end.txt" git cherry-pick --skip &&
-	test_subcommand_flex git maintenance run --auto <end.txt
+	test_subcommand_flex git maintenance run --auto <end.txt &&
+	grep "\"child_start\".*\"maintenance\"" end.txt >maintenance &&
+	test_line_count = 1 maintenance
 '
 
 test_done
-- 
gitgitgadget

Re: [PATCH v3 0/3] sequencer: leave auto maintenance to the end of a sequence

[Junio C Hamano]

"Thomas Bachem via GitGitGadget" <gitgitgadget@gmail.com> writes:

> Changes since v2:
>
>  * Auto maintenance now runs from builtin/rebase.c and builtin/revert.c,
>    once the command is done, instead of from three places inside the
>    sequencer. That follows the apply backend, where "git am" leaves it to
>    rebase.c (Patrick, Phillip).
>  * gc.auto=0 dropped, maintenance.auto=false is enough (Patrick).
>  * config_parameters is a char * built once with strbuf_detach() (Junio).
>  * Patch 3 extends the tests of patch 2 instead of adding its own. They also
>    assert that nothing runs before a stop, and cover a single pick with
>    --edit and a sequence ending in --skip (Phillip).
>  * Commit messages rewritten: what GIT_CONFIG_PARAMETERS is and looks like
>    (Patrick), what patch 2 changes for the user and why the call moved
>    (Patrick, Phillip), and the comment on the helper (Phillip).
>
> Based on master. Independent of the rerere lock fix in [1].

Will queue.

By the way, is it just me or are proposed log messages getting
longer and longer with more irrelevant detaild these days?

If it is not just my imagination, this trend must stop.

Throw "Say the same thing in 1/N of the words used." followed by
these proposed log messages to your near-by LLM, see if the output
still makes sense, and adjust the value of N.

For example, I got the following from [3/3] with N==3 and I think
that is far easier to understand than the original.

    Sequencer-spawned commands like 'commit' and 'merge' run
    background auto maintenance, which interferes with ongoing
    operations (e.g.  'rerere gc' holding MERGE_RR.lock or repacks
    deleting active packs).

    Pass maintenance.auto=false via GIT_CONFIG_PARAMETERS to all
    spawned commands.  Building this value after user settings
    ensures it wins and propagates to child processes.

    Auto maintenance now runs exactly once when the sequence
    completes.  Commands run manually by the user while stopped are
    unaffected and continue to run auto maintenance normally.

Thanks.

Re: [PATCH v3 0/3] sequencer: leave auto maintenance to the end of a sequence

[Kristoffer Haugsbakk]

On Tue, Sep 8, 2026, at 17:53, Junio C Hamano wrote:
> "Thomas Bachem via GitGitGadget" <gitgitgadget@gmail.com> writes:
>
>> Changes since v2:
>>
>>  * Auto maintenance now runs from builtin/rebase.c and builtin/revert.c,
>>    once the command is done, instead of from three places inside the
>>    sequencer. That follows the apply backend, where "git am" leaves it to
>>    rebase.c (Patrick, Phillip).
>>  * gc.auto=0 dropped, maintenance.auto=false is enough (Patrick).
>>  * config_parameters is a char * built once with strbuf_detach() (Junio).
>>  * Patch 3 extends the tests of patch 2 instead of adding its own. They also
>>    assert that nothing runs before a stop, and cover a single pick with
>>    --edit and a sequence ending in --skip (Phillip).
>>  * Commit messages rewritten: what GIT_CONFIG_PARAMETERS is and looks like
>>    (Patrick), what patch 2 changes for the user and why the call moved
>>    (Patrick, Phillip), and the comment on the helper (Phillip).
>>
>> Based on master. Independent of the rerere lock fix in [1].
>
> Will queue.
>
> By the way, is it just me or are proposed log messages getting
> longer and longer with more irrelevant detaild these days?

(sent from mobile)

Here is my impression. Six months ago, an on the
surface thorough commit message would

- describe the problem
- describe the solution conceptually
- maybe the concrete code solution...
- maybe the alternatives not followed
  through on...

(and this is still the case overall)

That can lead to verbose commit messages.
But note. There were also many things *not*
included.

- What tests have been added, what they test
- That the docs have been updated (accordingly)
  and howso
- Maybe even benchmarks when they are not
  relevant?

And only in the last six months have I seen
commit messages that look like they are 
explicitly filling in an imagined form with
a dozen or so reminder/mandatory points.

(Note in the cmt msg, not after it)

The most noticable ones to me are the ones
with the implied checkmarks in the last paragraph.

Those old school commit messages took
all the conventions and business as usual
(like adding a regression test alongside
the bugfix) and didn't mention “and we are
still following the project guidelines by…”

Of course, for those commit messages which look
more like code-to-English descriptions, I can't even
keep up and judge whether they are correct
and coherent.

>[snip]

Re: [PATCH v3 0/3] sequencer: leave auto maintenance to the end of a sequence

[Patrick Steinhardt]

On Tue, Sep 08, 2026 at 08:53:05AM -0700, Junio C Hamano wrote:
> "Thomas Bachem via GitGitGadget" <gitgitgadget@gmail.com> writes:
> 
> > Changes since v2:
> >
> >  * Auto maintenance now runs from builtin/rebase.c and builtin/revert.c,
> >    once the command is done, instead of from three places inside the
> >    sequencer. That follows the apply backend, where "git am" leaves it to
> >    rebase.c (Patrick, Phillip).
> >  * gc.auto=0 dropped, maintenance.auto=false is enough (Patrick).
> >  * config_parameters is a char * built once with strbuf_detach() (Junio).
> >  * Patch 3 extends the tests of patch 2 instead of adding its own. They also
> >    assert that nothing runs before a stop, and cover a single pick with
> >    --edit and a sequence ending in --skip (Phillip).
> >  * Commit messages rewritten: what GIT_CONFIG_PARAMETERS is and looks like
> >    (Patrick), what patch 2 changes for the user and why the call moved
> >    (Patrick, Phillip), and the comment on the helper (Phillip).
> >
> > Based on master. Independent of the rerere lock fix in [1].
> 
> Will queue.
> 
> By the way, is it just me or are proposed log messages getting
> longer and longer with more irrelevant detaild these days?
> 
> If it is not just my imagination, this trend must stop.

It's not your imagination, it's gotten quite a bit worse over the last
couple weeks. I also started to push back on this trend, see [1] for
example.

Thanks!

Patrick

[1]: <ap-iEoeY7XKjeZgL@pks.im>

Re: [PATCH v3 0/3] sequencer: leave auto maintenance to the end of a sequence

[Thomas Bachem]

Hi Junio,

On 08/09/2026 17:53, Junio C Hamano wrote:
> For example, I got the following from [3/3] with N==3 and I think
> that is far easier to understand than the original.

It is. I took your text for 3/3 with one correction: it says the
setting goes to all spawned commands, but I only pass it to commit,
merge and exec. The sequencer also spawns stash, reset and notes, and
those never run auto maintenance.

I shortened 1/3 and 2/3 to match and sent v4. The code is unchanged.

Thanks,
Thomas

[PATCH v4 0/3] sequencer: leave auto maintenance to the end of a sequence

[Thomas Bachem via GitGitGadget]

Changes since v3:

 * Commit messages condensed to about a third (Junio). 3/3 takes Junio's
   wording, except that the setting goes to the commit, merge and exec
   commands the sequencer spawns, not to all of them.

No code change.

Based on master. Independent of the rerere lock fix in [1].

[1] <pull.2214.v3.git.1788537081930.gitgitgadget@gmail.com>

Thomas Bachem (3):
  config: add git_config_append_parameter()
  rebase, cherry-pick, revert: run auto maintenance when done
  sequencer: disable auto maintenance in spawned commands

 builtin/rebase.c                | 13 ++++++++---
 builtin/revert.c                | 19 +++++++++++------
 config.c                        | 20 +++++++++++------
 config.h                        | 13 +++++++++++
 sequencer.c                     | 38 ++++++++++++++++++++++++++++++---
 t/t3418-rebase-continue.sh      | 17 +++++++++++++++
 t/t3510-cherry-pick-sequence.sh | 31 +++++++++++++++++++++++++++
 7 files changed, 131 insertions(+), 20 deletions(-)


base-commit: 3cb9185f65410273787f74333cc027d2ea5daada
Published-As: https://github.com/gitgitgadget/git/releases/tag/pr-2217%2Fthomasbachem%2Frebase-auto-maintenance-v4
Fetch-It-Via: git fetch https://github.com/gitgitgadget/git pr-2217/thomasbachem/rebase-auto-maintenance-v4
Pull-Request: https://github.com/gitgitgadget/git/pull/2217

Range-diff vs v3:

 1:  70db5ad084 ! 1:  0472fadbc5 config: add git_config_append_parameter()
     @@ Metadata
       ## Commit message ##
          config: add git_config_append_parameter()
      
     -    "git -c key=value" passes its settings on to the git commands it
     -    spawns through the environment variable GIT_CONFIG_PARAMETERS. The
     -    value is a space separated list of 'key'='value' pairs with both
     -    sides single quoted, which git_config_from_parameters() reads back in
     -    the child. The only place we write such an entry is
     -    git_config_push_split_parameter(), and it writes straight into our
     -    own environment.
     +    "git -c" passes its settings to the commands it spawns through
     +    GIT_CONFIG_PARAMETERS, a list of quoted 'key'='value' pairs. The only
     +    place that formats such an entry is git_config_push_split_parameter(),
     +    which writes straight into our own environment.
      
          Split the formatting out into git_config_append_parameter(), which
     -    appends one entry to a strbuf, so that we can build such a value for
     -    a child's environment without repeating the quoting. The sequencer
     -    will use it in a later commit to pass settings to the commands it
     -    spawns.
     +    appends one entry to a strbuf, so that a caller can build the value
     +    for a child's environment. The sequencer will use it in a later
     +    commit.
      
          Assisted-by: Claude Fable 5.1
          Signed-off-by: Thomas Bachem <mail@thomasbachem.com>
 2:  68a728c5f4 ! 2:  b7b97262f2 rebase, cherry-pick, revert: run auto maintenance when done
     @@ Metadata
       ## Commit message ##
          rebase, cherry-pick, revert: run auto maintenance when done
      
     -    "git commit", "git merge", "git fetch" and "git am" run "git
     -    maintenance run --auto" when they are done, and so does the apply
     -    backend of "git rebase". That repacks the loose objects they wrote
     -    once there are enough of them, expires old rerere entries and does
     -    whatever other housekeeping is due.
     -
     -    The merge backend of "git rebase", "git cherry-pick" and "git revert"
     -    do not. They create their commits in process, so auto maintenance
     -    runs only when they spawn a command that runs it on its own. That is
     -    the "git commit" for a resolved conflict or an edited message, the
     -    "git merge" that "--rebase-merges" spawns for an octopus merge, a
     -    strategy other than ort or any strategy option, and whatever an exec
     -    runs. A sequence that needs none of these never runs auto
     -    maintenance. One that stops for conflicts runs it after each
     -    resolution, in the middle of the sequence.
     +    "git cherry-pick", "git revert" and the merge backend of "git rebase"
     +    create their commits in process, so auto maintenance runs only when
     +    they spawn a command that runs it, like the "git commit" for a
     +    resolved conflict. A sequence thus runs it in the middle, after each
     +    resolution, or never.
      
          Run it once when the sequence is done, like the apply backend does.
      
     -    The apply backend leaves that to builtin/rebase.c: "git am" skips
     -    auto maintenance in rebasing mode, and finish_rebase() runs it once
     -    the patches are applied. Do the same for the sequencer, from
     -    builtin/rebase.c and builtin/revert.c, because the sequencer itself
     -    has no single place where every sequence ends. A sequence of several
     -    commits ends inside pick_commits(). A single cherry-pick or revert
     -    never creates the sequencer's state directory and returns to its
     -    caller as soon as its commit is made. "--continue" and "--skip" have
     -    entry points of their own. Nothing but those two builtins starts or
     -    continues a sequence, so that is where we run auto maintenance.
     -    run_specific_rebase() runs it for the merge backend once the
     -    sequencer has returned successfully and removed its state directory,
     -    which it keeps while the rebase is stopped. run_sequencer() runs it
     -    for cherry-pick and revert when a pick, a "--continue" or a "--skip"
     -    returns successfully.
     -
     -    For the user, a sequence that never stops now runs auto maintenance
     -    once when it is done, where it never ran it before. That is the same
     -    "git maintenance run --auto --detach" as after "git commit": it
     -    detaches into the background by default and does nothing unless one
     -    of its tasks is due. The runs from the commands a sequence spawns
     -    stay for now. The next commit removes them, so that a sequence runs
     -    auto maintenance exactly once.
     +    The sequencer has no single place where every sequence ends: a
     +    sequence of several commits ends in pick_commits(), a single pick
     +    returns as soon as its commit is made, and "--continue" and "--skip"
     +    have entry points of their own. Run it from the two builtins that
     +    start or continue a sequence instead: run_specific_rebase() once the
     +    sequencer has returned and removed its state directory, and
     +    run_sequencer() after a successful pick, "--continue" or "--skip".
      
          Assisted-by: Claude Fable 5.1
          Signed-off-by: Thomas Bachem <mail@thomasbachem.com>
 3:  7a353df3d9 ! 3:  031b3bd498 sequencer: disable auto maintenance in spawned commands
     @@ Metadata
       ## Commit message ##
          sequencer: disable auto maintenance in spawned commands
      
     -    The "git commit" and "git merge" the sequencer spawns run "git
     -    maintenance run --auto --detach" as they finish, and so does any
     -    such command an exec runs. That maintenance then works in the
     -    background while the sequencer goes on with the sequence, and the
     -    two get in each other's way. With rerere enabled, the maintenance
     -    started by the "git commit" of a "git rebase --continue" runs
     -    "rerere gc", which can still hold MERGE_RR.lock when the next pick
     -    conflicts. The rebase then dies with "Unable to create
     -    '.../MERGE_RR.lock': File exists" instead of stopping for the user
     -    to resolve the conflict. And a repack can delete a pack the
     -    sequencer still has open, which 65cda10d5b (sequencer: release the
     -    ODB before spawning git commit, 2026-08-12) works around.
     +    Sequencer-spawned commands like 'commit' and 'merge' run
     +    background auto maintenance, which interferes with ongoing
     +    operations (e.g. 'rerere gc' holding MERGE_RR.lock or repacks
     +    deleting active packs).
      
     -    Pass maintenance.auto=false to these commands through
     -    GIT_CONFIG_PARAMETERS, as "git -c" would. We build the value once
     -    from the one we inherited and append our setting after the user's
     -    own -c settings so that it wins. The environment also reaches
     -    everything the command spawns in turn, so a git command run from an
     -    exec is covered as well. The sequencer also spawns "git stash", "git
     -    reset" and "git notes", which never run auto maintenance.
     +    Pass maintenance.auto=false via GIT_CONFIG_PARAMETERS to the
     +    spawned commit, merge and exec commands. Appending it after the
     +    user's own settings ensures it wins, and the environment reaches
     +    whatever they spawn in turn.
      
     -    With the previous commit, rebase, cherry-pick and revert run auto
     -    maintenance once when they are done, so a sequence now runs it
     -    exactly once, at the end. A sequence that stops for conflicts used
     -    to run it at every resolution and now piles up its loose objects
     -    until the end, as a sequence without conflicts always has.
     -
     -    A command the user runs while the sequence is stopped, like "git
     -    commit --amend" at an edit, still runs auto maintenance. The
     -    sequencer does not spawn it and has no say in it.
     +    Auto maintenance now runs exactly once when the sequence
     +    completes. Commands run manually by the user while stopped are
     +    unaffected and continue to run auto maintenance normally.
      
          Assisted-by: Claude Fable 5.1
          Signed-off-by: Thomas Bachem <mail@thomasbachem.com>

-- 
gitgitgadget

[PATCH v4 1/3] config: add git_config_append_parameter()

[Thomas Bachem via GitGitGadget]

From: Thomas Bachem <mail@thomasbachem.com>

"git -c" passes its settings to the commands it spawns through
GIT_CONFIG_PARAMETERS, a list of quoted 'key'='value' pairs. The only
place that formats such an entry is git_config_push_split_parameter(),
which writes straight into our own environment.

Split the formatting out into git_config_append_parameter(), which
appends one entry to a strbuf, so that a caller can build the value
for a child's environment. The sequencer will use it in a later
commit.

Assisted-by: Claude Fable 5.1
Signed-off-by: Thomas Bachem <mail@thomasbachem.com>
---
 config.c | 20 +++++++++++++-------
 config.h | 13 +++++++++++++
 2 files changed, 26 insertions(+), 7 deletions(-)

diff --git a/config.c b/config.c
index d9019e7e6c..e0bb29b53d 100644
--- a/config.c
+++ b/config.c
@@ -450,18 +450,24 @@ static int git_config_include(const char *var, const char *value,
 	return ret;
 }
 
+void git_config_append_parameter(struct strbuf *env, const char *key,
+				 const char *value)
+{
+	if (env->len)
+		strbuf_addch(env, ' ');
+	sq_quote_buf(env, key);
+	strbuf_addch(env, '=');
+	if (value)
+		sq_quote_buf(env, value);
+}
+
 static void git_config_push_split_parameter(const char *key, const char *value)
 {
 	struct strbuf env = STRBUF_INIT;
 	const char *old = getenv(CONFIG_DATA_ENVIRONMENT);
-	if (old && *old) {
+	if (old && *old)
 		strbuf_addstr(&env, old);
-		strbuf_addch(&env, ' ');
-	}
-	sq_quote_buf(&env, key);
-	strbuf_addch(&env, '=');
-	if (value)
-		sq_quote_buf(&env, value);
+	git_config_append_parameter(&env, key, value);
 	setenv(CONFIG_DATA_ENVIRONMENT, env.buf, 1);
 	strbuf_release(&env);
 }
diff --git a/config.h b/config.h
index b66dd08007..838d1509a9 100644
--- a/config.h
+++ b/config.h
@@ -22,6 +22,7 @@
  */
 
 struct object_id;
+struct strbuf;
 
 /* git_config_parse_key() returns these negated: */
 #define CONFIG_INVALID_KEY 1
@@ -186,6 +187,18 @@ int git_config_from_blob_oid(config_fn_t fn, const char *name,
 			     enum config_scope scope);
 void git_config_push_parameter(const char *text);
 void git_config_push_env(const char *spec);
+
+/*
+ * Append a "-c key=value" setting to a GIT_CONFIG_PARAMETERS value in
+ * `env`. The variable carries such settings from a git process to the
+ * git commands it spawns, as a space separated list of 'key'='value'
+ * pairs with both sides single quoted, which git_config_from_parameters()
+ * reads back. A NULL `value` appends 'key'= with nothing after the equals
+ * sign, which stands for a boolean true, like "-c key" on the command
+ * line.
+ */
+void git_config_append_parameter(struct strbuf *env, const char *key,
+				 const char *value);
 int git_config_from_parameters(config_fn_t fn, void *data);
 
 /*
-- 
gitgitgadget

Re: [PATCH v4 1/3] config: add git_config_append_parameter()

[Patrick Steinhardt]

On Wed, Sep 09, 2026 at 08:25:29AM +0000, Thomas Bachem via GitGitGadget wrote:
> From: Thomas Bachem <mail@thomasbachem.com>
> 
> "git -c" passes its settings to the commands it spawns through
> GIT_CONFIG_PARAMETERS, a list of quoted 'key'='value' pairs. The only
> place that formats such an entry is git_config_push_split_parameter(),
> which writes straight into our own environment.
> 
> Split the formatting out into git_config_append_parameter(), which
> appends one entry to a strbuf, so that a caller can build the value
> for a child's environment. The sequencer will use it in a later
> commit.

Thanks, this commit message is much better now.

> diff --git a/config.h b/config.h
> index b66dd08007..838d1509a9 100644
> --- a/config.h
> +++ b/config.h
> @@ -186,6 +187,18 @@ int git_config_from_blob_oid(config_fn_t fn, const char *name,
>  			     enum config_scope scope);
>  void git_config_push_parameter(const char *text);
>  void git_config_push_env(const char *spec);
> +
> +/*
> + * Append a "-c key=value" setting to a GIT_CONFIG_PARAMETERS value in
> + * `env`. The variable carries such settings from a git process to the
> + * git commands it spawns, as a space separated list of 'key'='value'
> + * pairs with both sides single quoted, which git_config_from_parameters()
> + * reads back. A NULL `value` appends 'key'= with nothing after the equals
> + * sign, which stands for a boolean true, like "-c key" on the command
> + * line.
> + */

Nit: this is not necessarily specific to "-c key=value", and your later
patches in fact add sites where that is not the source. Proposal:

  Append a config option to the buffer that can be exported via the
  GIT_CONFIG_PARAMETERS environment variable, which allows us to
  propagate configuration across Git processes. The format of the
  variable is a space-separated list of quoted "'<key>'='<value>'"
  pairs.

Patrick

[PATCH v4 2/3] rebase, cherry-pick, revert: run auto maintenance when done

[Thomas Bachem via GitGitGadget]

From: Thomas Bachem <mail@thomasbachem.com>

"git cherry-pick", "git revert" and the merge backend of "git rebase"
create their commits in process, so auto maintenance runs only when
they spawn a command that runs it, like the "git commit" for a
resolved conflict. A sequence thus runs it in the middle, after each
resolution, or never.

Run it once when the sequence is done, like the apply backend does.

The sequencer has no single place where every sequence ends: a
sequence of several commits ends in pick_commits(), a single pick
returns as soon as its commit is made, and "--continue" and "--skip"
have entry points of their own. Run it from the two builtins that
start or continue a sequence instead: run_specific_rebase() once the
sequencer has returned and removed its state directory, and
run_sequencer() after a successful pick, "--continue" or "--skip".

Assisted-by: Claude Fable 5.1
Signed-off-by: Thomas Bachem <mail@thomasbachem.com>
---
 builtin/rebase.c                | 13 ++++++++++---
 builtin/revert.c                | 19 ++++++++++++-------
 t/t3418-rebase-continue.sh      | 12 ++++++++++++
 t/t3510-cherry-pick-sequence.sh | 23 +++++++++++++++++++++++
 4 files changed, 57 insertions(+), 10 deletions(-)

diff --git a/builtin/rebase.c b/builtin/rebase.c
index 10a306310c..535db60181 100644
--- a/builtin/rebase.c
+++ b/builtin/rebase.c
@@ -762,9 +762,16 @@ static int run_specific_rebase(struct rebase_options *opts)
 
 	if (opts->dont_finish_rebase)
 		; /* do nothing */
-	else if (opts->type == REBASE_MERGE)
-		; /* merge backend cleans up after itself */
-	else if (status == 0) {
+	else if (opts->type == REBASE_MERGE) {
+		int quiet = !(opts->flags & (REBASE_NO_QUIET|REBASE_VERBOSE));
+
+		/*
+		 * The sequencer cleans up after itself. Its state directory
+		 * is gone once it is done, and stays while it is stopped.
+		 */
+		if (status == 0 && !is_directory(opts->state_dir))
+			run_auto_maintenance(the_repository, quiet);
+	} else if (status == 0) {
 		if (!file_exists(state_dir_path("stopped-sha", opts)))
 			finish_rebase(opts);
 	} else if (status == 2) {
diff --git a/builtin/revert.c b/builtin/revert.c
index bedc40f368..52100a20cb 100644
--- a/builtin/revert.c
+++ b/builtin/revert.c
@@ -8,6 +8,7 @@
 #include "gettext.h"
 #include "revision.h"
 #include "rerere.h"
+#include "run-command.h"
 #include "sequencer.h"
 #include "branch.h"
 
@@ -116,7 +117,7 @@ static int run_sequencer(int argc, const char **argv, const char *prefix,
 	const char *strategy = &sentinel_value;
 	const char *gpg_sign = &sentinel_value;
 	enum empty_action empty_opt = EMPTY_COMMIT_UNSPECIFIED;
-	int cmd = 0;
+	int cmd = 0, ret;
 	struct option base_options[] = {
 		OPT_CMDMODE(0, "quit", &cmd, N_("end revert or cherry-pick sequence"), 'q'),
 		OPT_CMDMODE(0, "continue", &cmd, N_("resume revert or cherry-pick sequence"), 'c'),
@@ -264,18 +265,22 @@ static int run_sequencer(int argc, const char **argv, const char *prefix,
 	free(options);
 
 	if (cmd == 'q') {
-		int ret = sequencer_remove_state(opts);
+		ret = sequencer_remove_state(opts);
 		if (!ret)
 			remove_branch_state(the_repository, 0);
 		return ret;
 	}
-	if (cmd == 'c')
-		return sequencer_continue(the_repository, opts);
 	if (cmd == 'a')
 		return sequencer_rollback(the_repository, opts);
-	if (cmd == 's')
-		return sequencer_skip(the_repository, opts);
-	return sequencer_pick_revisions(the_repository, opts);
+	if (cmd == 'c')
+		ret = sequencer_continue(the_repository, opts);
+	else if (cmd == 's')
+		ret = sequencer_skip(the_repository, opts);
+	else
+		ret = sequencer_pick_revisions(the_repository, opts);
+	if (!ret)
+		run_auto_maintenance(the_repository, opts->quiet);
+	return ret;
 }
 
 int cmd_revert(int argc,
diff --git a/t/t3418-rebase-continue.sh b/t/t3418-rebase-continue.sh
index cb5c3a1cb5..025787b5f2 100755
--- a/t/t3418-rebase-continue.sh
+++ b/t/t3418-rebase-continue.sh
@@ -395,4 +395,16 @@ test_orig_head () {
 test_orig_head --apply
 test_orig_head --merge
 
+test_expect_success 'rebase runs auto maintenance once it is done' '
+	git checkout -b auto-maintenance topic &&
+	test_must_fail env GIT_TRACE2_EVENT="$(pwd)/stop.txt" \
+		git rebase -x false main &&
+	test_subcommand_flex ! git maintenance run --auto <stop.txt &&
+	echo resolved >F2 &&
+	git add F2 &&
+	test_must_fail git rebase --continue &&
+	GIT_TRACE2_EVENT="$(pwd)/end.txt" git rebase --continue &&
+	test_subcommand_flex git maintenance run --auto <end.txt
+'
+
 test_done
diff --git a/t/t3510-cherry-pick-sequence.sh b/t/t3510-cherry-pick-sequence.sh
index 5777dff496..2bea55c3b6 100755
--- a/t/t3510-cherry-pick-sequence.sh
+++ b/t/t3510-cherry-pick-sequence.sh
@@ -721,4 +721,27 @@ test_expect_success 'commit descriptions in insn sheet are optional' '
 	test_line_count = 4 commits
 '
 
+test_expect_success 'cherry-pick runs auto maintenance once it is done' '
+	pristine_detach base &&
+	GIT_TRACE2_EVENT="$(pwd)/single.txt" git cherry-pick picked &&
+	test_subcommand_flex git maintenance run --auto <single.txt &&
+	GIT_TRACE2_EVENT="$(pwd)/sequence.txt" \
+		git cherry-pick anotherpick yetanotherpick &&
+	test_subcommand_flex git maintenance run --auto <sequence.txt &&
+	grep "\"child_start\".*\"maintenance\"" sequence.txt >maintenance &&
+	test_line_count = 1 maintenance
+'
+
+test_expect_success 'cherry-pick runs auto maintenance once a stopped sequence is done' '
+	pristine_detach initial &&
+	test_must_fail env GIT_TRACE2_EVENT="$(pwd)/stop.txt" \
+		git cherry-pick base..anotherpick &&
+	test_subcommand_flex ! git maintenance run --auto <stop.txt &&
+	echo resolved >foo &&
+	git add foo &&
+	test_must_fail git cherry-pick --continue &&
+	GIT_TRACE2_EVENT="$(pwd)/end.txt" git cherry-pick --skip &&
+	test_subcommand_flex git maintenance run --auto <end.txt
+'
+
 test_done
-- 
gitgitgadget

Re: [PATCH v4 2/3] rebase, cherry-pick, revert: run auto maintenance when done

[Patrick Steinhardt]

On Wed, Sep 09, 2026 at 08:25:30AM +0000, Thomas Bachem via GitGitGadget wrote:
> From: Thomas Bachem <mail@thomasbachem.com>
> 
> "git cherry-pick", "git revert" and the merge backend of "git rebase"
> create their commits in process, so auto maintenance runs only when
> they spawn a command that runs it, like the "git commit" for a
> resolved conflict. A sequence thus runs it in the middle, after each
> resolution, or never.

This paragraph still doesn't make a lot of sense. How about:

  Commands that use the sequencer with the "merge" backend, like
  git-cherry-pick(1) or git-rebase(1) with "--merge", create their
  commits in-process. Consequently, these commands typically don't
  execute auto-maintenance at all. The only exception is when a conflict
  happens, as the user would have to manually commit the result via
  git-commit(1), and that command triggers auto-maintenance for us.

  In contrast to that, the "apply" backend of the sequencer _does_ run
  auto-maintenance after it has processed the sequence of commits. And
  this is a sensible thing to do: after all, we may just have written
  lots of objects, so chances are high that we have something to clean
  up now.

  Adapt users of the "merge" backend to do the same.

  Unfortunately, there is no single exit point for this backend where we
  could add a call to `run_auto_maintenance()`. While one might expect
  that we could simply trigger auto-maintenance in `pick_commits()` and
  call it a day, a single pick as it is performed by e.g. git-revert(1)
  never executes that function. So instead, manually trigger
  auto-maintenance at several sites.

This last paragraph though...

> Run it once when the sequence is done, like the apply backend does.
> 
> The sequencer has no single place where every sequence ends: a
> sequence of several commits ends in pick_commits(), a single pick
> returns as soon as its commit is made, and "--continue" and "--skip"
> have entry points of their own. Run it from the two builtins that
> start or continue a sequence instead: run_specific_rebase() once the
> sequencer has returned and removed its state directory, and
> run_sequencer() after a successful pick, "--continue" or "--skip".

... is still kind of dubious. As far as I can see, almost everything
does end up in `pick_commits()` eventually:

  - git-revert(1) does via `run_sequencer()`, which calls
    `sequencer_pick_revisions()`, and that calls `pick_commits()`.

  - git-cherry-pick(1) does via the same call chain.

  - git-rebase(1) does so via `do_interactive_rebase()`, which calls
    `complete_action()`, and that function calls `pick_commits()`. Or
    alternatively via `sequencer_continue()`, which again calls it.

  - Skipping commits via "--skip" eventually ends up in
    `sequencer_continue()`, and that calls `pick_commits()`.

The only exception that I could spot is when we abort the sequencer. But
I'd rather have us call auto-maintenance when `pick_commits()` is done
and when we abort rather than having every user of the sequencer do it
manually.

Or am I missing something here?

Patrick

[PATCH v4 3/3] sequencer: disable auto maintenance in spawned commands

[Thomas Bachem via GitGitGadget]

From: Thomas Bachem <mail@thomasbachem.com>

Sequencer-spawned commands like 'commit' and 'merge' run
background auto maintenance, which interferes with ongoing
operations (e.g. 'rerere gc' holding MERGE_RR.lock or repacks
deleting active packs).

Pass maintenance.auto=false via GIT_CONFIG_PARAMETERS to the
spawned commit, merge and exec commands. Appending it after the
user's own settings ensures it wins, and the environment reaches
whatever they spawn in turn.

Auto maintenance now runs exactly once when the sequence
completes. Commands run manually by the user while stopped are
unaffected and continue to run auto maintenance normally.

Assisted-by: Claude Fable 5.1
Signed-off-by: Thomas Bachem <mail@thomasbachem.com>
---
 sequencer.c                     | 38 ++++++++++++++++++++++++++++++---
 t/t3418-rebase-continue.sh      | 11 +++++++---
 t/t3510-cherry-pick-sequence.sh | 14 +++++++++---
 3 files changed, 54 insertions(+), 9 deletions(-)

diff --git a/sequencer.c b/sequencer.c
index 65afd100d9..e99ef09f02 100644
--- a/sequencer.c
+++ b/sequencer.c
@@ -234,6 +234,11 @@ struct replay_ctx {
 	 * Whether message contains a commit message.
 	 */
 	unsigned have_message :1;
+	/*
+	 * GIT_CONFIG_PARAMETERS for the commands we spawn, with auto
+	 * maintenance turned off. Built on first use.
+	 */
+	char *config_parameters;
 };
 
 struct replay_ctx* replay_ctx_new(void)
@@ -407,6 +412,7 @@ static void replay_ctx_release(struct replay_ctx *ctx)
 {
 	strbuf_release(&ctx->current_fixups);
 	strbuf_release(&ctx->message);
+	free(ctx->config_parameters);
 }
 
 void replay_opts_release(struct replay_opts *opts)
@@ -1107,6 +1113,27 @@ static int run_command_silent_on_success(struct child_process *cmd)
 	return rc;
 }
 
+/*
+ * Don't let the commands we spawn run auto maintenance. It would race
+ * us for MERGE_RR.lock or delete packs we still have open. Our caller
+ * runs it once the sequence is done.
+ */
+static void disable_auto_maintenance(struct replay_opts *opts,
+				     struct child_process *cmd)
+{
+	if (!opts->ctx->config_parameters) {
+		const char *old = getenv(CONFIG_DATA_ENVIRONMENT);
+		struct strbuf buf = STRBUF_INIT;
+
+		if (old && *old)
+			strbuf_addstr(&buf, old);
+		git_config_append_parameter(&buf, "maintenance.auto", "false");
+		opts->ctx->config_parameters = strbuf_detach(&buf, NULL);
+	}
+	strvec_pushf(&cmd->env, "%s=%s", CONFIG_DATA_ENVIRONMENT,
+		     opts->ctx->config_parameters);
+}
+
 /*
  * If we are cherry-pick, and if the merge did not result in
  * hand-editing, we will hit this commit and inherit the original
@@ -1148,6 +1175,7 @@ static int run_git_commit(const char *defmsg,
 			     author_date_from_env(&cmd.env));
 	if (opts->ignore_date)
 		strvec_push(&cmd.env, "GIT_AUTHOR_DATE=");
+	disable_auto_maintenance(opts, &cmd);
 
 	strvec_push(&cmd.args, "commit");
 
@@ -3924,16 +3952,18 @@ static int error_failed_squash(struct repository *r,
 	return error_with_patch(r, commit, subject, subject_len, opts, 1, 1);
 }
 
-static int do_exec(struct repository *r, const char *command_line, int quiet)
+static int do_exec(struct repository *r, const char *command_line,
+		   struct replay_opts *opts)
 {
 	struct child_process cmd = CHILD_PROCESS_INIT;
 	int dirty, status;
 
-	if (!quiet)
+	if (!opts->quiet)
 		fprintf(stderr, _("Executing: %s\n"), command_line);
 	cmd.use_shell = 1;
 	strvec_push(&cmd.args, command_line);
 	strvec_push(&cmd.env, "GIT_CHERRY_PICK_HELP");
+	disable_auto_maintenance(opts, &cmd);
 	status = run_command(&cmd);
 
 	/* force re-reading of the cache */
@@ -4342,6 +4372,7 @@ static int do_merge(struct repository *r,
 				     author_date_from_env(&cmd.env));
 		if (opts->ignore_date)
 			strvec_push(&cmd.env, "GIT_AUTHOR_DATE=");
+		disable_auto_maintenance(opts, &cmd);
 
 		cmd.git_cmd = 1;
 		strvec_push(&cmd.args, "merge");
@@ -5158,7 +5189,7 @@ static int pick_commits(struct repository *r,
 			if (!opts->verbose)
 				term_clear_line();
 			*end_of_arg = '\0';
-			res = do_exec(r, arg, opts->quiet);
+			res = do_exec(r, arg, opts);
 			*end_of_arg = saved;
 
 			if (res) {
@@ -5329,6 +5360,7 @@ static int continue_single_pick(struct repository *r, struct replay_opts *opts)
 		return error(_("no cherry-pick or revert in progress"));
 
 	cmd.git_cmd = 1;
+	disable_auto_maintenance(opts, &cmd);
 	strvec_push(&cmd.args, "commit");
 
 	/*
diff --git a/t/t3418-rebase-continue.sh b/t/t3418-rebase-continue.sh
index 025787b5f2..16def261b0 100755
--- a/t/t3418-rebase-continue.sh
+++ b/t/t3418-rebase-continue.sh
@@ -398,13 +398,18 @@ test_orig_head --merge
 test_expect_success 'rebase runs auto maintenance once it is done' '
 	git checkout -b auto-maintenance topic &&
 	test_must_fail env GIT_TRACE2_EVENT="$(pwd)/stop.txt" \
-		git rebase -x false main &&
+		git rebase -x "git commit --allow-empty -m exec && false" main &&
 	test_subcommand_flex ! git maintenance run --auto <stop.txt &&
 	echo resolved >F2 &&
 	git add F2 &&
-	test_must_fail git rebase --continue &&
+	test_must_fail env GIT_TRACE2_EVENT="$(pwd)/mid.txt" \
+		git rebase --continue &&
+	test_subcommand_flex git commit <mid.txt &&
+	test_subcommand_flex ! git maintenance run --auto <mid.txt &&
 	GIT_TRACE2_EVENT="$(pwd)/end.txt" git rebase --continue &&
-	test_subcommand_flex git maintenance run --auto <end.txt
+	test_subcommand_flex git maintenance run --auto <end.txt &&
+	grep "\"child_start\".*\"maintenance\"" end.txt >maintenance &&
+	test_line_count = 1 maintenance
 '
 
 test_done
diff --git a/t/t3510-cherry-pick-sequence.sh b/t/t3510-cherry-pick-sequence.sh
index 2bea55c3b6..1e3fa1803c 100755
--- a/t/t3510-cherry-pick-sequence.sh
+++ b/t/t3510-cherry-pick-sequence.sh
@@ -723,8 +723,11 @@ test_expect_success 'commit descriptions in insn sheet are optional' '
 
 test_expect_success 'cherry-pick runs auto maintenance once it is done' '
 	pristine_detach base &&
-	GIT_TRACE2_EVENT="$(pwd)/single.txt" git cherry-pick picked &&
+	GIT_TRACE2_EVENT="$(pwd)/single.txt" git cherry-pick --edit picked &&
+	test_subcommand_flex git commit <single.txt &&
 	test_subcommand_flex git maintenance run --auto <single.txt &&
+	grep "\"child_start\".*\"maintenance\"" single.txt >maintenance &&
+	test_line_count = 1 maintenance &&
 	GIT_TRACE2_EVENT="$(pwd)/sequence.txt" \
 		git cherry-pick anotherpick yetanotherpick &&
 	test_subcommand_flex git maintenance run --auto <sequence.txt &&
@@ -739,9 +742,14 @@ test_expect_success 'cherry-pick runs auto maintenance once a stopped sequence i
 	test_subcommand_flex ! git maintenance run --auto <stop.txt &&
 	echo resolved >foo &&
 	git add foo &&
-	test_must_fail git cherry-pick --continue &&
+	test_must_fail env GIT_TRACE2_EVENT="$(pwd)/mid.txt" \
+		git cherry-pick --continue &&
+	test_subcommand_flex git commit <mid.txt &&
+	test_subcommand_flex ! git maintenance run --auto <mid.txt &&
 	GIT_TRACE2_EVENT="$(pwd)/end.txt" git cherry-pick --skip &&
-	test_subcommand_flex git maintenance run --auto <end.txt
+	test_subcommand_flex git maintenance run --auto <end.txt &&
+	grep "\"child_start\".*\"maintenance\"" end.txt >maintenance &&
+	test_line_count = 1 maintenance
 '
 
 test_done
-- 
gitgitgadget

Re: [PATCH v4 3/3] sequencer: disable auto maintenance in spawned commands

[Phillip Wood]

Hi Thomas

On 09/09/2026 09:25, Thomas Bachem via GitGitGadget wrote:
> From: Thomas Bachem <mail@thomasbachem.com>
> 
> Sequencer-spawned commands like 'commit' and 'merge' run
> background auto maintenance, which interferes with ongoing
> operations (e.g. 'rerere gc' holding MERGE_RR.lock or repacks
> deleting active packs).

This is much more concise, but still sounds a bit strange to me. I'd suggest

When the sequencer spawns "git commit", or "git merge", those commands
run "git maintenance --auto" in the background which can interfere with
the sequencer (e.g. 'rerere gc' holding MERGE_RR.lock or repacks 
deleting active packs).
> Pass maintenance.auto=false via GIT_CONFIG_PARAMETERS to the
> spawned commit, merge and exec commands. Appending it after the
> user's own settings ensures it wins, and the environment reaches
> whatever they spawn in turn.
> 
> Auto maintenance now runs exactly once when the sequence
> completes. Commands run manually by the user while stopped are
> unaffected and continue to run auto maintenance normally.

Good, and the implementation changes look correct.

> diff --git a/t/t3418-rebase-continue.sh b/t/t3418-rebase-continue.sh
> index 025787b5f2..16def261b0 100755
> --- a/t/t3418-rebase-continue.sh
> +++ b/t/t3418-rebase-continue.sh
> @@ -398,13 +398,18 @@ test_orig_head --merge
>   test_expect_success 'rebase runs auto maintenance once it is done' '
>   	git checkout -b auto-maintenance topic &&
>   	test_must_fail env GIT_TRACE2_EVENT="$(pwd)/stop.txt" \
> -		git rebase -x false main &&
> +		git rebase -x "git commit --allow-empty -m exec && false" main &&
>   	test_subcommand_flex ! git maintenance run --auto <stop.txt &&
>   	echo resolved >F2 &&
>   	git add F2 &&
> -	test_must_fail git rebase --continue &&
> +	test_must_fail env GIT_TRACE2_EVENT="$(pwd)/mid.txt" \
> +		git rebase --continue &&

What's this trying to check - there wasn't a conflict so 
commit_staged_changes() will error out without trying to commit 
anything. This series is looking pretty good now. Just to let you know 
I'll be off the list from tomorrow until the middle of next week so it 
will be a few days before I look at any new versions of this patch.

Thanks

Phillip

> +	test_subcommand_flex git commit <mid.txt &&
> +	test_subcommand_flex ! git maintenance run --auto <mid.txt &&
>   	GIT_TRACE2_EVENT="$(pwd)/end.txt" git rebase --continue &&
> -	test_subcommand_flex git maintenance run --auto <end.txt
> +	test_subcommand_flex git maintenance run --auto <end.txt &&
> +	grep "\"child_start\".*\"maintenance\"" end.txt >maintenance &&
> +	test_line_count = 1 maintenance
>   '
>   
>   test_done
> diff --git a/t/t3510-cherry-pick-sequence.sh b/t/t3510-cherry-pick-sequence.sh
> index 2bea55c3b6..1e3fa1803c 100755
> --- a/t/t3510-cherry-pick-sequence.sh
> +++ b/t/t3510-cherry-pick-sequence.sh
> @@ -723,8 +723,11 @@ test_expect_success 'commit descriptions in insn sheet are optional' '
>   
>   test_expect_success 'cherry-pick runs auto maintenance once it is done' '
>   	pristine_detach base &&
> -	GIT_TRACE2_EVENT="$(pwd)/single.txt" git cherry-pick picked &&
> +	GIT_TRACE2_EVENT="$(pwd)/single.txt" git cherry-pick --edit picked &&
> +	test_subcommand_flex git commit <single.txt &&
>   	test_subcommand_flex git maintenance run --auto <single.txt &&
> +	grep "\"child_start\".*\"maintenance\"" single.txt >maintenance &&
> +	test_line_count = 1 maintenance &&
>   	GIT_TRACE2_EVENT="$(pwd)/sequence.txt" \
>   		git cherry-pick anotherpick yetanotherpick &&
>   	test_subcommand_flex git maintenance run --auto <sequence.txt &&
> @@ -739,9 +742,14 @@ test_expect_success 'cherry-pick runs auto maintenance once a stopped sequence i
>   	test_subcommand_flex ! git maintenance run --auto <stop.txt &&
>   	echo resolved >foo &&
>   	git add foo &&
> -	test_must_fail git cherry-pick --continue &&
> +	test_must_fail env GIT_TRACE2_EVENT="$(pwd)/mid.txt" \
> +		git cherry-pick --continue &&
> +	test_subcommand_flex git commit <mid.txt &&
> +	test_subcommand_flex ! git maintenance run --auto <mid.txt &&
>   	GIT_TRACE2_EVENT="$(pwd)/end.txt" git cherry-pick --skip &&
> -	test_subcommand_flex git maintenance run --auto <end.txt
> +	test_subcommand_flex git maintenance run --auto <end.txt &&
> +	grep "\"child_start\".*\"maintenance\"" end.txt >maintenance &&
> +	test_line_count = 1 maintenance
>   '
>   
>   test_done