From: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
To: igt-dev@lists.freedesktop.org
Subject: [igt-dev] [PATCH i-g-t 07/23] i915/perf: Add support for 64-bit counters
Date: Mon, 22 Aug 2022 23:56:41 +0000 [thread overview]
Message-ID: <20220822235657.280702-8-umesh.nerlige.ramappa@intel.com> (raw)
In-Reply-To: <20220822235657.280702-1-umesh.nerlige.ramappa@intel.com>
Add support for 64-bit counters.
Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
---
tests/i915/perf.c | 70 ++++++++++++++++++++++++++++++++++++++++++-----
1 file changed, 63 insertions(+), 7 deletions(-)
diff --git a/tests/i915/perf.c b/tests/i915/perf.c
index 5fd143e9..19c33324 100644
--- a/tests/i915/perf.c
+++ b/tests/i915/perf.c
@@ -101,6 +101,8 @@ struct oa_format {
int a40_high_off; /* bytes */
int a40_low_off;
int n_a40;
+ int a64_off;
+ int n_a64;
int a_off;
int n_a;
int first_a;
@@ -455,7 +457,7 @@ max_oa_exponent_for_freq_gt(uint64_t frequency)
static uint64_t
oa_exponent_to_ns(int exponent)
{
- return 1000000000ULL * (2ULL << exponent) / intel_perf->devinfo.timestamp_frequency;
+ return 1000000000ULL * (2ULL << exponent) / intel_perf->devinfo.timestamp_frequency;
}
static bool
@@ -658,6 +660,15 @@ gen8_read_40bit_a_counter(const uint32_t *report,
return a40_low[a_id] | high;
}
+static uint64_t
+gen12_read_64bit_a_counter(const uint32_t *report, enum drm_i915_oa_format fmt, int a_id)
+{
+ struct oa_format format = get_oa_format(fmt);
+ uint64_t *a64 = (uint64_t *)(((uint8_t *)report) + format.a64_off);
+
+ return a64[a_id];
+}
+
static uint64_t
gen8_40bit_a_delta(uint64_t value0, uint64_t value1)
{
@@ -670,8 +681,8 @@ gen8_40bit_a_delta(uint64_t value0, uint64_t value1)
static void
accumulate_uint32(size_t offset,
uint32_t *report0,
- uint32_t *report1,
- uint64_t *delta)
+ uint32_t *report1,
+ uint64_t *delta)
{
uint32_t value0 = *(uint32_t *)(((uint8_t *)report0) + offset);
uint32_t value1 = *(uint32_t *)(((uint8_t *)report1) + offset);
@@ -681,10 +692,10 @@ accumulate_uint32(size_t offset,
static void
accumulate_uint40(int a_index,
- uint32_t *report0,
- uint32_t *report1,
+ uint32_t *report0,
+ uint32_t *report1,
enum drm_i915_oa_format format,
- uint64_t *delta)
+ uint64_t *delta)
{
uint64_t value0 = gen8_read_40bit_a_counter(report0, format, a_index),
value1 = gen8_read_40bit_a_counter(report1, format, a_index);
@@ -692,6 +703,19 @@ accumulate_uint40(int a_index,
*delta += gen8_40bit_a_delta(value0, value1);
}
+static void
+accumulate_uint64(int a_index,
+ const uint32_t *report0,
+ const uint32_t *report1,
+ enum drm_i915_oa_format format,
+ uint64_t *delta)
+{
+ uint64_t value0 = gen12_read_64bit_a_counter(report0, format, a_index),
+ value1 = gen12_read_64bit_a_counter(report1, format, a_index);
+
+ *delta += (value1 - value0);
+}
+
static void
accumulate_reports(struct accumulator *accumulator,
uint32_t *start,
@@ -717,6 +741,11 @@ accumulate_reports(struct accumulator *accumulator,
deltas + idx++);
}
+ for (int i = 0; i < format.n_a64; i++) {
+ accumulate_uint64(i, start, end, accumulator->format,
+ deltas + idx++);
+ }
+
for (int i = 0; i < format.n_a; i++) {
accumulate_uint32(format.a_off + 4 * i,
start, end, deltas + idx++);
@@ -747,6 +776,9 @@ accumulator_print(struct accumulator *accumulator, const char *title)
for (int i = 0; i < format.n_a40; i++)
igt_debug("\tA%u = %"PRIu64"\n", i, deltas[idx++]);
+
+ for (int i = 0; i < format.n_a64; i++)
+ igt_debug("\tA64_%u = %"PRIu64"\n", i, deltas[idx++]);
} else {
igt_debug("\ttime delta = %"PRIu64"\n", deltas[idx++]);
}
@@ -803,7 +835,19 @@ gen8_sanity_check_test_oa_reports(const uint32_t *oa_report0,
if (undefined_a_counters[j])
continue;
- igt_debug("A%d: delta = %"PRIu64"\n", j, delta);
+ igt_debug("A40_%d: delta = %"PRIu64"\n", j, delta);
+ igt_assert(delta <= max_delta);
+ }
+
+ for (int j = 0; j < format.n_a64; j++) {
+ uint64_t delta = 0;
+
+ accumulate_uint64(j, oa_report0, oa_report1, fmt, &delta);
+
+ if (undefined_a_counters[j])
+ continue;
+
+ igt_debug("A64_%d: delta = %"PRIu64"\n", format.first_a + j, delta);
igt_assert(delta <= max_delta);
}
@@ -1368,6 +1412,18 @@ print_reports(uint32_t *oa_report0, uint32_t *oa_report1, int fmt)
j, value0, value1, delta);
}
+ for (int j = 0; j < format.n_a64; j++) {
+ uint64_t value0 = gen12_read_64bit_a_counter(oa_report0, fmt, j);
+ uint64_t value1 = gen12_read_64bit_a_counter(oa_report1, fmt, j);
+ uint64_t delta = value1 - value0;
+
+ if (undefined_a_counters[j])
+ continue;
+
+ igt_debug("A_64%d: 1st = %"PRIu64", 2nd = %"PRIu64", delta = %"PRIu64"\n",
+ format.first_a + j, value0, value1, delta);
+ }
+
for (int j = 0; j < format.n_a; j++) {
uint32_t *a0 = (uint32_t *)(((uint8_t *)oa_report0) +
format.a_off);
--
2.25.1
next prev parent reply other threads:[~2022-08-22 23:57 UTC|newest]
Thread overview: 32+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-08-22 23:56 [igt-dev] [PATCH i-g-t 00/23] Add DG2 OA test Umesh Nerlige Ramappa
2022-08-22 23:56 ` [igt-dev] [PATCH i-g-t 01/23] i915/perf: Check regularly if we are done reading reports Umesh Nerlige Ramappa
2022-08-22 23:56 ` [igt-dev] [PATCH i-g-t 02/23] i915/perf: Fix OA short_reads test Umesh Nerlige Ramappa
2022-08-22 23:56 ` [igt-dev] [PATCH i-g-t 03/23] i915/perf: Check return value from getparam Umesh Nerlige Ramappa
2022-08-22 23:56 ` [igt-dev] [PATCH i-g-t 04/23] i915/perf: Limit sseu-config tests for gen11 Umesh Nerlige Ramappa
2022-08-22 23:56 ` [igt-dev] [PATCH i-g-t 05/23] i915/perf: Bump timestamp tolerance for DG1 Umesh Nerlige Ramappa
2022-08-22 23:56 ` [igt-dev] [PATCH i-g-t 06/23] i915/perf: Account for OA sampling interval in polling test Umesh Nerlige Ramappa
2022-08-22 23:56 ` Umesh Nerlige Ramappa [this message]
2022-08-22 23:56 ` [igt-dev] [PATCH i-g-t 08/23] i915/perf: Define OA report types Umesh Nerlige Ramappa
2022-08-22 23:56 ` [igt-dev] [PATCH i-g-t 09/23] i915/perf: Use ARRAY_SIZE consistently for num_properties Umesh Nerlige Ramappa
2022-08-22 23:56 ` [igt-dev] [PATCH i-g-t 10/23] i915/perf: Use gt in perf tests and lib Umesh Nerlige Ramappa
2022-08-22 23:56 ` [igt-dev] [PATCH i-g-t 11/23] i915/perf: Explicitly state rendercopy needs for a test Umesh Nerlige Ramappa
2022-08-22 23:56 ` [igt-dev] [PATCH i-g-t 12/23] i915/perf: Skip tests that use rendercopy Umesh Nerlige Ramappa
2022-08-22 23:56 ` [igt-dev] [PATCH i-g-t 13/23] i915/perf: Add OA formats for DG2 Umesh Nerlige Ramappa
2022-08-22 23:56 ` [igt-dev] [PATCH i-g-t 14/23] i915/perf: Add a test for non-power-of-2 oa reports Umesh Nerlige Ramappa
2022-08-22 23:56 ` [igt-dev] [PATCH i-g-t 15/23] i915/perf: Fix CS timestamp vs OA timstamp mismatch Umesh Nerlige Ramappa
2022-08-22 23:56 ` [igt-dev] [PATCH i-g-t 16/23] i915/perf: Treat ticks as 64 bit Umesh Nerlige Ramappa
2022-08-22 23:56 ` [igt-dev] [PATCH i-g-t 17/23] i915/perf: Treat timestamp as 64 bit value Umesh Nerlige Ramappa
2022-08-22 23:56 ` [igt-dev] [PATCH i-g-t 18/23] i915/perf: Fix DG2 A0 report header Umesh Nerlige Ramappa
2022-08-22 23:56 ` [igt-dev] [PATCH i-g-t 19/23] i915/perf: Wait longer for rc6 residency in DG2 Umesh Nerlige Ramappa
2022-08-22 23:56 ` [igt-dev] [PATCH i-g-t 20/23] lib/i915/perf: implement report accumulation for new format Umesh Nerlige Ramappa
2022-08-22 23:56 ` [igt-dev] [PATCH i-g-t 21/23] lib/i915/perf: fixup conversion script for XEHPSDV Umesh Nerlige Ramappa
2022-08-22 23:56 ` [igt-dev] [PATCH i-g-t 22/23] lib/i915/perf: make warning message more helpful Umesh Nerlige Ramappa
2022-08-22 23:56 ` [igt-dev] [PATCH i-g-t 23/23] lib/i915/perf: Add DG2 metrics Umesh Nerlige Ramappa
2022-08-24 21:34 ` [igt-dev] ✓ Fi.CI.BAT: success for Add DG2 OA test (rev4) Patchwork
2022-08-26 16:38 ` [igt-dev] ✗ Fi.CI.IGT: failure " Patchwork
2022-08-29 7:56 ` [igt-dev] [PATCH i-g-t 00/23] Add DG2 OA test Kamil Konieczny
-- strict thread matches above, loose matches on Subject: below --
2022-08-23 18:30 Umesh Nerlige Ramappa
2022-08-23 18:30 ` [igt-dev] [PATCH i-g-t 07/23] i915/perf: Add support for 64-bit counters Umesh Nerlige Ramappa
2022-09-06 13:05 ` Lionel Landwerlin
2022-09-06 19:37 ` Umesh Nerlige Ramappa
2022-09-06 20:02 ` Lionel Landwerlin
2022-09-06 20:58 ` Umesh Nerlige Ramappa
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220822235657.280702-8-umesh.nerlige.ramappa@intel.com \
--to=umesh.nerlige.ramappa@intel.com \
--cc=igt-dev@lists.freedesktop.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox