Igt-dev Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
To: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: igt-dev@lists.freedesktop.org
Subject: Re: [igt-dev] [PATCH i-g-t 07/23] i915/perf: Add support for 64-bit counters
Date: Tue, 6 Sep 2022 13:58:48 -0700	[thread overview]
Message-ID: <Yxe0iJldVKo+3NyO@unerlige-ril> (raw)
In-Reply-To: <6831f7b6-dc54-9239-4cf0-9924ff15cc57@intel.com>

On Tue, Sep 06, 2022 at 11:02:49PM +0300, Lionel Landwerlin wrote:
>On 06/09/2022 22:37, Umesh Nerlige Ramappa wrote:
>>On Tue, Sep 06, 2022 at 04:05:59PM +0300, Lionel Landwerlin wrote:
>>>On 23/08/2022 21:30, Umesh Nerlige Ramappa wrote:
>>>>Add support for 64-bit counters.
>>>>
>>>>Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
>>>
>>>With the unnecessary changes removed :
>>
>>The noise is from minor checkpatch corrections - spaces to tabs in 
>>the beginning of the line. I agree, it's not relevant to this patch.
>>
>>Do you still want me to remove them? I am okay either ways.
>>
>>Thanks,
>>Umesh
>
>
>I'm not familiar with checkpatch but I'm struggling to see why it 
>would insert random changes like that.
>
>If you ran it on previous patches it would have produced the same 
>isolated changes no?
>
>It would be best to have single commit doing coding style changes at 
>the beginning or end of the series.

I am going to drop the coding style changes here and follow that up as a 
separate series since it's not relevant here.

Thanks,
Umesh
>
>
>Thanks,
>
>
>-Lionel
>
>
>>
>>>
>>>Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
>>>
>>>>---
>>>> tests/i915/perf.c | 70 ++++++++++++++++++++++++++++++++++++++++++-----
>>>> 1 file changed, 63 insertions(+), 7 deletions(-)
>>>>
>>>>diff --git a/tests/i915/perf.c b/tests/i915/perf.c
>>>>index 5fd143e9..19c33324 100644
>>>>--- a/tests/i915/perf.c
>>>>+++ b/tests/i915/perf.c
>>>>@@ -101,6 +101,8 @@ struct oa_format {
>>>>     int a40_high_off; /* bytes */
>>>>     int a40_low_off;
>>>>     int n_a40;
>>>>+    int a64_off;
>>>>+    int n_a64;
>>>>     int a_off;
>>>>     int n_a;
>>>>     int first_a;
>>>>@@ -455,7 +457,7 @@ max_oa_exponent_for_freq_gt(uint64_t frequency)
>>>> static uint64_t
>>>> oa_exponent_to_ns(int exponent)
>>>> {
>>>>-       return 1000000000ULL * (2ULL << exponent) / 
>>>>intel_perf->devinfo.timestamp_frequency;
>>>>+    return 1000000000ULL * (2ULL << exponent) / 
>>>>intel_perf->devinfo.timestamp_frequency;
>>>Can't see any change on the line above.
>>>> }
>>>> static bool
>>>>@@ -658,6 +660,15 @@ gen8_read_40bit_a_counter(const uint32_t *report,
>>>>     return a40_low[a_id] | high;
>>>> }
>>>>+static uint64_t
>>>>+gen12_read_64bit_a_counter(const uint32_t *report, enum 
>>>>drm_i915_oa_format fmt, int a_id)
>>>>+{
>>>>+    struct oa_format format = get_oa_format(fmt);
>>>>+    uint64_t *a64 = (uint64_t *)(((uint8_t *)report) + 
>>>>format.a64_off);
>>>>+
>>>>+    return a64[a_id];
>>>>+}
>>>>+
>>>> static uint64_t
>>>> gen8_40bit_a_delta(uint64_t value0, uint64_t value1)
>>>> {
>>>>@@ -670,8 +681,8 @@ gen8_40bit_a_delta(uint64_t value0, uint64_t 
>>>>value1)
>>>> static void
>>>> accumulate_uint32(size_t offset,
>>>>           uint32_t *report0,
>>>>-                  uint32_t *report1,
>>>>-                  uint64_t *delta)
>>>>+          uint32_t *report1,
>>>>+          uint64_t *delta)
>>>This hunk appears to just be noise.
>>>> {
>>>>     uint32_t value0 = *(uint32_t *)(((uint8_t *)report0) + offset);
>>>>     uint32_t value1 = *(uint32_t *)(((uint8_t *)report1) + offset);
>>>>@@ -681,10 +692,10 @@ accumulate_uint32(size_t offset,
>>>> static void
>>>> accumulate_uint40(int a_index,
>>>>-                  uint32_t *report0,
>>>>-                  uint32_t *report1,
>>>>+          uint32_t *report0,
>>>>+          uint32_t *report1,
>>>>           enum drm_i915_oa_format format,
>>>>-                  uint64_t *delta)
>>>>+          uint64_t *delta)
>>>
>>>Here too
>>>
>>>> {
>>>>     uint64_t value0 = gen8_read_40bit_a_counter(report0, 
>>>>format, a_index),
>>>>          value1 = gen8_read_40bit_a_counter(report1, format, a_index);
>>>>@@ -692,6 +703,19 @@ accumulate_uint40(int a_index,
>>>>     *delta += gen8_40bit_a_delta(value0, value1);
>>>> }
>>>>+static void
>>>>+accumulate_uint64(int a_index,
>>>>+          const uint32_t *report0,
>>>>+          const uint32_t *report1,
>>>>+          enum drm_i915_oa_format format,
>>>>+          uint64_t *delta)
>>>>+{
>>>>+    uint64_t value0 = gen12_read_64bit_a_counter(report0, 
>>>>format, a_index),
>>>>+         value1 = gen12_read_64bit_a_counter(report1, format, 
>>>>a_index);
>>>>+
>>>>+    *delta += (value1 - value0);
>>>>+}
>>>>+
>>>> static void
>>>> accumulate_reports(struct accumulator *accumulator,
>>>>            uint32_t *start,
>>>>@@ -717,6 +741,11 @@ accumulate_reports(struct accumulator 
>>>>*accumulator,
>>>>                   deltas + idx++);
>>>>     }
>>>>+    for (int i = 0; i < format.n_a64; i++) {
>>>>+        accumulate_uint64(i, start, end, accumulator->format,
>>>>+                  deltas + idx++);
>>>>+    }
>>>>+
>>>>     for (int i = 0; i < format.n_a; i++) {
>>>>         accumulate_uint32(format.a_off + 4 * i,
>>>>                   start, end, deltas + idx++);
>>>>@@ -747,6 +776,9 @@ accumulator_print(struct accumulator 
>>>>*accumulator, const char *title)
>>>>         for (int i = 0; i < format.n_a40; i++)
>>>>             igt_debug("\tA%u = %"PRIu64"\n", i, deltas[idx++]);
>>>>+
>>>>+        for (int i = 0; i < format.n_a64; i++)
>>>>+            igt_debug("\tA64_%u = %"PRIu64"\n", i, deltas[idx++]);
>>>>     } else {
>>>>         igt_debug("\ttime delta = %"PRIu64"\n", deltas[idx++]);
>>>>     }
>>>>@@ -803,7 +835,19 @@ gen8_sanity_check_test_oa_reports(const 
>>>>uint32_t *oa_report0,
>>>>         if (undefined_a_counters[j])
>>>>             continue;
>>>>-        igt_debug("A%d: delta = %"PRIu64"\n", j, delta);
>>>>+        igt_debug("A40_%d: delta = %"PRIu64"\n", j, delta);
>>>>+        igt_assert(delta <= max_delta);
>>>>+    }
>>>>+
>>>>+    for (int j = 0; j < format.n_a64; j++) {
>>>>+        uint64_t delta = 0;
>>>>+
>>>>+        accumulate_uint64(j, oa_report0, oa_report1, fmt, &delta);
>>>>+
>>>>+        if (undefined_a_counters[j])
>>>>+            continue;
>>>>+
>>>>+        igt_debug("A64_%d: delta = %"PRIu64"\n", format.first_a 
>>>>+ j, delta);
>>>>         igt_assert(delta <= max_delta);
>>>>     }
>>>>@@ -1368,6 +1412,18 @@ print_reports(uint32_t *oa_report0, 
>>>>uint32_t *oa_report1, int fmt)
>>>>               j, value0, value1, delta);
>>>>     }
>>>>+    for (int j = 0; j < format.n_a64; j++) {
>>>>+        uint64_t value0 = 
>>>>gen12_read_64bit_a_counter(oa_report0, fmt, j);
>>>>+        uint64_t value1 = 
>>>>gen12_read_64bit_a_counter(oa_report1, fmt, j);
>>>>+        uint64_t delta = value1 - value0;
>>>>+
>>>>+        if (undefined_a_counters[j])
>>>>+            continue;
>>>>+
>>>>+        igt_debug("A_64%d: 1st = %"PRIu64", 2nd = %"PRIu64", 
>>>>delta = %"PRIu64"\n",
>>>>+              format.first_a + j, value0, value1, delta);
>>>>+    }
>>>>+
>>>>     for (int j = 0; j < format.n_a; j++) {
>>>>         uint32_t *a0 = (uint32_t *)(((uint8_t *)oa_report0) +
>>>>                         format.a_off);
>>>
>>>
>

  reply	other threads:[~2022-09-06 20:58 UTC|newest]

Thread overview: 66+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-08-23 18:30 [igt-dev] [PATCH i-g-t 00/23] Add DG2 OA test Umesh Nerlige Ramappa
2022-08-23 18:30 ` [igt-dev] [PATCH i-g-t 01/23] i915/perf: Check regularly if we are done reading reports Umesh Nerlige Ramappa
2022-09-06 12:49   ` Lionel Landwerlin
2022-08-23 18:30 ` [igt-dev] [PATCH i-g-t 02/23] i915/perf: Fix OA short_reads test Umesh Nerlige Ramappa
2022-09-06 12:50   ` Lionel Landwerlin
2022-08-23 18:30 ` [igt-dev] [PATCH i-g-t 03/23] i915/perf: Check return value from getparam Umesh Nerlige Ramappa
2022-09-06 12:52   ` Lionel Landwerlin
2022-08-23 18:30 ` [igt-dev] [PATCH i-g-t 04/23] i915/perf: Limit sseu-config tests for gen11 Umesh Nerlige Ramappa
2022-09-06 12:53   ` Lionel Landwerlin
2022-08-23 18:30 ` [igt-dev] [PATCH i-g-t 05/23] i915/perf: Bump timestamp tolerance for DG1 Umesh Nerlige Ramappa
2022-09-06 13:06   ` Lionel Landwerlin
2022-09-06 19:30     ` Umesh Nerlige Ramappa
2022-08-23 18:30 ` [igt-dev] [PATCH i-g-t 06/23] i915/perf: Account for OA sampling interval in polling test Umesh Nerlige Ramappa
2022-08-23 18:30 ` [igt-dev] [PATCH i-g-t 07/23] i915/perf: Add support for 64-bit counters Umesh Nerlige Ramappa
2022-09-06 13:05   ` Lionel Landwerlin
2022-09-06 19:37     ` Umesh Nerlige Ramappa
2022-09-06 20:02       ` Lionel Landwerlin
2022-09-06 20:58         ` Umesh Nerlige Ramappa [this message]
2022-08-23 18:30 ` [igt-dev] [PATCH i-g-t 08/23] i915/perf: Define OA report types Umesh Nerlige Ramappa
2022-09-06 13:08   ` Lionel Landwerlin
2022-09-06 19:28     ` Umesh Nerlige Ramappa
2022-08-23 18:30 ` [igt-dev] [PATCH i-g-t 09/23] i915/perf: Use ARRAY_SIZE consistently for num_properties Umesh Nerlige Ramappa
2022-09-06 13:10   ` Lionel Landwerlin
2022-08-23 18:30 ` [igt-dev] [PATCH i-g-t 10/23] i915/perf: Use gt in perf tests and lib Umesh Nerlige Ramappa
2022-09-06 13:13   ` Lionel Landwerlin
2022-08-23 18:30 ` [igt-dev] [PATCH i-g-t 11/23] i915/perf: Explicitly state rendercopy needs for a test Umesh Nerlige Ramappa
2022-09-06 13:26   ` Lionel Landwerlin
2022-08-23 18:30 ` [igt-dev] [PATCH i-g-t 12/23] i915/perf: Skip tests that use rendercopy Umesh Nerlige Ramappa
2022-09-06 13:28   ` Lionel Landwerlin
2022-08-23 18:30 ` [igt-dev] [PATCH i-g-t 13/23] i915/perf: Add OA formats for DG2 Umesh Nerlige Ramappa
2022-09-06 13:30   ` Lionel Landwerlin
2022-08-23 18:30 ` [igt-dev] [PATCH i-g-t 14/23] i915/perf: Add a test for non-power-of-2 oa reports Umesh Nerlige Ramappa
2022-09-06 14:08   ` Lionel Landwerlin
2022-09-20 19:28     ` Umesh Nerlige Ramappa
2022-08-23 18:30 ` [igt-dev] [PATCH i-g-t 15/23] i915/perf: Fix CS timestamp vs OA timstamp mismatch Umesh Nerlige Ramappa
2022-09-06 13:36   ` Lionel Landwerlin
2022-08-23 18:30 ` [igt-dev] [PATCH i-g-t 16/23] i915/perf: Treat ticks as 64 bit Umesh Nerlige Ramappa
2022-09-06 14:08   ` Lionel Landwerlin
2022-09-06 18:56     ` Umesh Nerlige Ramappa
2022-09-06 19:06       ` Lionel Landwerlin
2022-08-23 18:30 ` [igt-dev] [PATCH i-g-t 17/23] i915/perf: Treat timestamp as 64 bit value Umesh Nerlige Ramappa
2022-09-06 14:16   ` Lionel Landwerlin
2022-08-23 18:30 ` [igt-dev] [PATCH i-g-t 18/23] i915/perf: Fix DG2 A0 report header Umesh Nerlige Ramappa
2022-09-06 14:17   ` Lionel Landwerlin
2022-09-06 18:37     ` Umesh Nerlige Ramappa
2022-09-06 18:54       ` Lionel Landwerlin
2022-08-23 18:30 ` [igt-dev] [PATCH i-g-t 19/23] i915/perf: Wait longer for rc6 residency in DG2 Umesh Nerlige Ramappa
2022-09-06 14:18   ` Lionel Landwerlin
2022-08-23 18:30 ` [igt-dev] [PATCH i-g-t 20/23] lib/i915/perf: implement report accumulation for new format Umesh Nerlige Ramappa
2022-09-06 14:21   ` Lionel Landwerlin
2022-09-20 20:02   ` Umesh Nerlige Ramappa
2022-08-23 18:30 ` [igt-dev] [PATCH i-g-t 21/23] lib/i915/perf: fixup conversion script for XEHPSDV Umesh Nerlige Ramappa
2022-09-20 20:03   ` Umesh Nerlige Ramappa
2022-08-23 18:30 ` [igt-dev] [PATCH i-g-t 22/23] lib/i915/perf: make warning message more helpful Umesh Nerlige Ramappa
2022-09-20 20:04   ` Umesh Nerlige Ramappa
2022-08-23 18:30 ` [igt-dev] [PATCH i-g-t 23/23] lib/i915/perf: Add DG2 metrics Umesh Nerlige Ramappa
2022-09-20 23:11   ` Umesh Nerlige Ramappa
2022-08-23 20:30 ` [igt-dev] [PATCH i-g-t 18/23] i915/perf: Fix DG2 A0 report header Umesh Nerlige Ramappa
2022-09-06 14:23   ` Lionel Landwerlin
2022-09-06 18:33     ` Umesh Nerlige Ramappa
2022-08-23 21:00 ` [igt-dev] ✗ Fi.CI.BUILD: failure for Add DG2 OA test Patchwork
2022-08-24  9:33 ` [igt-dev] ✗ Fi.CI.BUILD: failure for Add DG2 OA test (rev2) Patchwork
2022-08-24  9:58   ` Petri Latvala
2022-08-24 13:08 ` [igt-dev] ✓ Fi.CI.BAT: success for Add DG2 OA test (rev3) Patchwork
2022-08-25 20:33 ` [igt-dev] ✗ Fi.CI.IGT: failure " Patchwork
  -- strict thread matches above, loose matches on Subject: below --
2022-08-22 23:56 [igt-dev] [PATCH i-g-t 00/23] Add DG2 OA test Umesh Nerlige Ramappa
2022-08-22 23:56 ` [igt-dev] [PATCH i-g-t 07/23] i915/perf: Add support for 64-bit counters Umesh Nerlige Ramappa

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=Yxe0iJldVKo+3NyO@unerlige-ril \
    --to=umesh.nerlige.ramappa@intel.com \
    --cc=igt-dev@lists.freedesktop.org \
    --cc=lionel.g.landwerlin@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox