Igt-dev Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
To: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: igt-dev@lists.freedesktop.org
Subject: Re: [igt-dev] [PATCH i-g-t 07/23] i915/perf: Add support for 64-bit counters
Date: Tue, 6 Sep 2022 12:37:34 -0700	[thread overview]
Message-ID: <YxehfuwjkpHx7UlA@unerlige-ril> (raw)
In-Reply-To: <9c7b1b2f-308f-8a35-c60a-db99c2facfd0@intel.com>

On Tue, Sep 06, 2022 at 04:05:59PM +0300, Lionel Landwerlin wrote:
>On 23/08/2022 21:30, Umesh Nerlige Ramappa wrote:
>>Add support for 64-bit counters.
>>
>>Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
>
>With the unnecessary changes removed :

The noise is from minor checkpatch corrections - spaces to tabs in the 
beginning of the line. I agree, it's not relevant to this patch.

Do you still want me to remove them? I am okay either ways.

Thanks,
Umesh

>
>Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
>
>>---
>>  tests/i915/perf.c | 70 ++++++++++++++++++++++++++++++++++++++++++-----
>>  1 file changed, 63 insertions(+), 7 deletions(-)
>>
>>diff --git a/tests/i915/perf.c b/tests/i915/perf.c
>>index 5fd143e9..19c33324 100644
>>--- a/tests/i915/perf.c
>>+++ b/tests/i915/perf.c
>>@@ -101,6 +101,8 @@ struct oa_format {
>>  	int a40_high_off; /* bytes */
>>  	int a40_low_off;
>>  	int n_a40;
>>+	int a64_off;
>>+	int n_a64;
>>  	int a_off;
>>  	int n_a;
>>  	int first_a;
>>@@ -455,7 +457,7 @@ max_oa_exponent_for_freq_gt(uint64_t frequency)
>>  static uint64_t
>>  oa_exponent_to_ns(int exponent)
>>  {
>>-       return 1000000000ULL * (2ULL << exponent) / intel_perf->devinfo.timestamp_frequency;
>>+	return 1000000000ULL * (2ULL << exponent) / intel_perf->devinfo.timestamp_frequency;
>Can't see any change on the line above.
>>  }
>>  static bool
>>@@ -658,6 +660,15 @@ gen8_read_40bit_a_counter(const uint32_t *report,
>>  	return a40_low[a_id] | high;
>>  }
>>+static uint64_t
>>+gen12_read_64bit_a_counter(const uint32_t *report, enum drm_i915_oa_format fmt, int a_id)
>>+{
>>+	struct oa_format format = get_oa_format(fmt);
>>+	uint64_t *a64 = (uint64_t *)(((uint8_t *)report) + format.a64_off);
>>+
>>+	return a64[a_id];
>>+}
>>+
>>  static uint64_t
>>  gen8_40bit_a_delta(uint64_t value0, uint64_t value1)
>>  {
>>@@ -670,8 +681,8 @@ gen8_40bit_a_delta(uint64_t value0, uint64_t value1)
>>  static void
>>  accumulate_uint32(size_t offset,
>>  		  uint32_t *report0,
>>-                  uint32_t *report1,
>>-                  uint64_t *delta)
>>+		  uint32_t *report1,
>>+		  uint64_t *delta)
>This hunk appears to just be noise.
>>  {
>>  	uint32_t value0 = *(uint32_t *)(((uint8_t *)report0) + offset);
>>  	uint32_t value1 = *(uint32_t *)(((uint8_t *)report1) + offset);
>>@@ -681,10 +692,10 @@ accumulate_uint32(size_t offset,
>>  static void
>>  accumulate_uint40(int a_index,
>>-                  uint32_t *report0,
>>-                  uint32_t *report1,
>>+		  uint32_t *report0,
>>+		  uint32_t *report1,
>>  		  enum drm_i915_oa_format format,
>>-                  uint64_t *delta)
>>+		  uint64_t *delta)
>
>Here too
>
>>  {
>>  	uint64_t value0 = gen8_read_40bit_a_counter(report0, format, a_index),
>>  		 value1 = gen8_read_40bit_a_counter(report1, format, a_index);
>>@@ -692,6 +703,19 @@ accumulate_uint40(int a_index,
>>  	*delta += gen8_40bit_a_delta(value0, value1);
>>  }
>>+static void
>>+accumulate_uint64(int a_index,
>>+		  const uint32_t *report0,
>>+		  const uint32_t *report1,
>>+		  enum drm_i915_oa_format format,
>>+		  uint64_t *delta)
>>+{
>>+	uint64_t value0 = gen12_read_64bit_a_counter(report0, format, a_index),
>>+		 value1 = gen12_read_64bit_a_counter(report1, format, a_index);
>>+
>>+	*delta += (value1 - value0);
>>+}
>>+
>>  static void
>>  accumulate_reports(struct accumulator *accumulator,
>>  		   uint32_t *start,
>>@@ -717,6 +741,11 @@ accumulate_reports(struct accumulator *accumulator,
>>  				  deltas + idx++);
>>  	}
>>+	for (int i = 0; i < format.n_a64; i++) {
>>+		accumulate_uint64(i, start, end, accumulator->format,
>>+				  deltas + idx++);
>>+	}
>>+
>>  	for (int i = 0; i < format.n_a; i++) {
>>  		accumulate_uint32(format.a_off + 4 * i,
>>  				  start, end, deltas + idx++);
>>@@ -747,6 +776,9 @@ accumulator_print(struct accumulator *accumulator, const char *title)
>>  		for (int i = 0; i < format.n_a40; i++)
>>  			igt_debug("\tA%u = %"PRIu64"\n", i, deltas[idx++]);
>>+
>>+		for (int i = 0; i < format.n_a64; i++)
>>+			igt_debug("\tA64_%u = %"PRIu64"\n", i, deltas[idx++]);
>>  	} else {
>>  		igt_debug("\ttime delta = %"PRIu64"\n", deltas[idx++]);
>>  	}
>>@@ -803,7 +835,19 @@ gen8_sanity_check_test_oa_reports(const uint32_t *oa_report0,
>>  		if (undefined_a_counters[j])
>>  			continue;
>>-		igt_debug("A%d: delta = %"PRIu64"\n", j, delta);
>>+		igt_debug("A40_%d: delta = %"PRIu64"\n", j, delta);
>>+		igt_assert(delta <= max_delta);
>>+	}
>>+
>>+	for (int j = 0; j < format.n_a64; j++) {
>>+		uint64_t delta = 0;
>>+
>>+		accumulate_uint64(j, oa_report0, oa_report1, fmt, &delta);
>>+
>>+		if (undefined_a_counters[j])
>>+			continue;
>>+
>>+		igt_debug("A64_%d: delta = %"PRIu64"\n", format.first_a + j, delta);
>>  		igt_assert(delta <= max_delta);
>>  	}
>>@@ -1368,6 +1412,18 @@ print_reports(uint32_t *oa_report0, uint32_t *oa_report1, int fmt)
>>  			  j, value0, value1, delta);
>>  	}
>>+	for (int j = 0; j < format.n_a64; j++) {
>>+		uint64_t value0 = gen12_read_64bit_a_counter(oa_report0, fmt, j);
>>+		uint64_t value1 = gen12_read_64bit_a_counter(oa_report1, fmt, j);
>>+		uint64_t delta = value1 - value0;
>>+
>>+		if (undefined_a_counters[j])
>>+			continue;
>>+
>>+		igt_debug("A_64%d: 1st = %"PRIu64", 2nd = %"PRIu64", delta = %"PRIu64"\n",
>>+			  format.first_a + j, value0, value1, delta);
>>+	}
>>+
>>  	for (int j = 0; j < format.n_a; j++) {
>>  		uint32_t *a0 = (uint32_t *)(((uint8_t *)oa_report0) +
>>  					    format.a_off);
>
>

  reply	other threads:[~2022-09-06 19:37 UTC|newest]

Thread overview: 66+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-08-23 18:30 [igt-dev] [PATCH i-g-t 00/23] Add DG2 OA test Umesh Nerlige Ramappa
2022-08-23 18:30 ` [igt-dev] [PATCH i-g-t 01/23] i915/perf: Check regularly if we are done reading reports Umesh Nerlige Ramappa
2022-09-06 12:49   ` Lionel Landwerlin
2022-08-23 18:30 ` [igt-dev] [PATCH i-g-t 02/23] i915/perf: Fix OA short_reads test Umesh Nerlige Ramappa
2022-09-06 12:50   ` Lionel Landwerlin
2022-08-23 18:30 ` [igt-dev] [PATCH i-g-t 03/23] i915/perf: Check return value from getparam Umesh Nerlige Ramappa
2022-09-06 12:52   ` Lionel Landwerlin
2022-08-23 18:30 ` [igt-dev] [PATCH i-g-t 04/23] i915/perf: Limit sseu-config tests for gen11 Umesh Nerlige Ramappa
2022-09-06 12:53   ` Lionel Landwerlin
2022-08-23 18:30 ` [igt-dev] [PATCH i-g-t 05/23] i915/perf: Bump timestamp tolerance for DG1 Umesh Nerlige Ramappa
2022-09-06 13:06   ` Lionel Landwerlin
2022-09-06 19:30     ` Umesh Nerlige Ramappa
2022-08-23 18:30 ` [igt-dev] [PATCH i-g-t 06/23] i915/perf: Account for OA sampling interval in polling test Umesh Nerlige Ramappa
2022-08-23 18:30 ` [igt-dev] [PATCH i-g-t 07/23] i915/perf: Add support for 64-bit counters Umesh Nerlige Ramappa
2022-09-06 13:05   ` Lionel Landwerlin
2022-09-06 19:37     ` Umesh Nerlige Ramappa [this message]
2022-09-06 20:02       ` Lionel Landwerlin
2022-09-06 20:58         ` Umesh Nerlige Ramappa
2022-08-23 18:30 ` [igt-dev] [PATCH i-g-t 08/23] i915/perf: Define OA report types Umesh Nerlige Ramappa
2022-09-06 13:08   ` Lionel Landwerlin
2022-09-06 19:28     ` Umesh Nerlige Ramappa
2022-08-23 18:30 ` [igt-dev] [PATCH i-g-t 09/23] i915/perf: Use ARRAY_SIZE consistently for num_properties Umesh Nerlige Ramappa
2022-09-06 13:10   ` Lionel Landwerlin
2022-08-23 18:30 ` [igt-dev] [PATCH i-g-t 10/23] i915/perf: Use gt in perf tests and lib Umesh Nerlige Ramappa
2022-09-06 13:13   ` Lionel Landwerlin
2022-08-23 18:30 ` [igt-dev] [PATCH i-g-t 11/23] i915/perf: Explicitly state rendercopy needs for a test Umesh Nerlige Ramappa
2022-09-06 13:26   ` Lionel Landwerlin
2022-08-23 18:30 ` [igt-dev] [PATCH i-g-t 12/23] i915/perf: Skip tests that use rendercopy Umesh Nerlige Ramappa
2022-09-06 13:28   ` Lionel Landwerlin
2022-08-23 18:30 ` [igt-dev] [PATCH i-g-t 13/23] i915/perf: Add OA formats for DG2 Umesh Nerlige Ramappa
2022-09-06 13:30   ` Lionel Landwerlin
2022-08-23 18:30 ` [igt-dev] [PATCH i-g-t 14/23] i915/perf: Add a test for non-power-of-2 oa reports Umesh Nerlige Ramappa
2022-09-06 14:08   ` Lionel Landwerlin
2022-09-20 19:28     ` Umesh Nerlige Ramappa
2022-08-23 18:30 ` [igt-dev] [PATCH i-g-t 15/23] i915/perf: Fix CS timestamp vs OA timstamp mismatch Umesh Nerlige Ramappa
2022-09-06 13:36   ` Lionel Landwerlin
2022-08-23 18:30 ` [igt-dev] [PATCH i-g-t 16/23] i915/perf: Treat ticks as 64 bit Umesh Nerlige Ramappa
2022-09-06 14:08   ` Lionel Landwerlin
2022-09-06 18:56     ` Umesh Nerlige Ramappa
2022-09-06 19:06       ` Lionel Landwerlin
2022-08-23 18:30 ` [igt-dev] [PATCH i-g-t 17/23] i915/perf: Treat timestamp as 64 bit value Umesh Nerlige Ramappa
2022-09-06 14:16   ` Lionel Landwerlin
2022-08-23 18:30 ` [igt-dev] [PATCH i-g-t 18/23] i915/perf: Fix DG2 A0 report header Umesh Nerlige Ramappa
2022-09-06 14:17   ` Lionel Landwerlin
2022-09-06 18:37     ` Umesh Nerlige Ramappa
2022-09-06 18:54       ` Lionel Landwerlin
2022-08-23 18:30 ` [igt-dev] [PATCH i-g-t 19/23] i915/perf: Wait longer for rc6 residency in DG2 Umesh Nerlige Ramappa
2022-09-06 14:18   ` Lionel Landwerlin
2022-08-23 18:30 ` [igt-dev] [PATCH i-g-t 20/23] lib/i915/perf: implement report accumulation for new format Umesh Nerlige Ramappa
2022-09-06 14:21   ` Lionel Landwerlin
2022-09-20 20:02   ` Umesh Nerlige Ramappa
2022-08-23 18:30 ` [igt-dev] [PATCH i-g-t 21/23] lib/i915/perf: fixup conversion script for XEHPSDV Umesh Nerlige Ramappa
2022-09-20 20:03   ` Umesh Nerlige Ramappa
2022-08-23 18:30 ` [igt-dev] [PATCH i-g-t 22/23] lib/i915/perf: make warning message more helpful Umesh Nerlige Ramappa
2022-09-20 20:04   ` Umesh Nerlige Ramappa
2022-08-23 18:30 ` [igt-dev] [PATCH i-g-t 23/23] lib/i915/perf: Add DG2 metrics Umesh Nerlige Ramappa
2022-09-20 23:11   ` Umesh Nerlige Ramappa
2022-08-23 20:30 ` [igt-dev] [PATCH i-g-t 18/23] i915/perf: Fix DG2 A0 report header Umesh Nerlige Ramappa
2022-09-06 14:23   ` Lionel Landwerlin
2022-09-06 18:33     ` Umesh Nerlige Ramappa
2022-08-23 21:00 ` [igt-dev] ✗ Fi.CI.BUILD: failure for Add DG2 OA test Patchwork
2022-08-24  9:33 ` [igt-dev] ✗ Fi.CI.BUILD: failure for Add DG2 OA test (rev2) Patchwork
2022-08-24  9:58   ` Petri Latvala
2022-08-24 13:08 ` [igt-dev] ✓ Fi.CI.BAT: success for Add DG2 OA test (rev3) Patchwork
2022-08-25 20:33 ` [igt-dev] ✗ Fi.CI.IGT: failure " Patchwork
  -- strict thread matches above, loose matches on Subject: below --
2022-08-22 23:56 [igt-dev] [PATCH i-g-t 00/23] Add DG2 OA test Umesh Nerlige Ramappa
2022-08-22 23:56 ` [igt-dev] [PATCH i-g-t 07/23] i915/perf: Add support for 64-bit counters Umesh Nerlige Ramappa

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=YxehfuwjkpHx7UlA@unerlige-ril \
    --to=umesh.nerlige.ramappa@intel.com \
    --cc=igt-dev@lists.freedesktop.org \
    --cc=lionel.g.landwerlin@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox