[igt-dev] [PATCH i-g-t 0/2] vram d3cold threshold test

[igt-dev] [PATCH i-g-t 0/2] vram d3cold threshold test

[Anshuman Gupta]

Adding vram_d3cold_threshold subtest

Anshuman Gupta (2):
  tests/xe_pm : Add support to disable all crtc
  test/xe_pm: Add vram_d3cold_threshold subtest

 tests/xe/xe_pm.c | 93 ++++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 93 insertions(+)

-- 
2.25.1

[igt-dev] [PATCH i-g-t 1/2] tests/xe_pm : Add support to disable all crtc

[Anshuman Gupta]

xe_pm d3 test requires to disable all crtc in order to enter
to d3 state therefore, adding the support to disable all crtc.

Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com>
---
 tests/xe/xe_pm.c | 20 ++++++++++++++++++++
 1 file changed, 20 insertions(+)

diff --git a/tests/xe/xe_pm.c b/tests/xe/xe_pm.c
index 23b8246ed..c71fce892 100644
--- a/tests/xe/xe_pm.c
+++ b/tests/xe/xe_pm.c
@@ -34,6 +34,7 @@ typedef struct {
 	int fd_xe;
 	struct pci_device *pci_xe;
 	struct pci_device *pci_root;
+	igt_display_t display;
 } device_t;
 
 /* runtime_usage is only available if kernel build CONFIG_PM_ADVANCED_DEBUG */
@@ -150,6 +151,23 @@ static bool out_of_d3(device_t device, enum igt_acpi_d_state state)
 	return true;
 }
 
+static void disable_all_crtc(device_t *device)
+{
+	if (!drmModeGetResources(device->fd_xe))
+		return;
+
+	igt_display_require(&device->display, device->fd_xe);
+	igt_modeset_disable_all_outputs(&device->display);
+}
+
+static void display_fini(device_t *device)
+{
+	if (!drmModeGetResources(device->fd_xe))
+		return;
+
+	igt_display_fini(&device->display);
+}
+
 /**
  * SUBTEST: %s-basic
  * Description: set GPU state to %arg[1] and test suspend/autoresume
@@ -378,6 +396,7 @@ igt_main
 
 		get_d3cold_allowed(device.pci_xe, d3cold_allowed);
 		igt_assert(igt_setup_runtime_pm(device.fd_xe));
+		disable_all_crtc(&device);
 	}
 
 	for (const struct s_state *s = s_states; s->name; s++) {
@@ -438,6 +457,7 @@ igt_main
 	}
 
 	igt_fixture {
+		display_fini(&device);
 		set_d3cold_allowed(device.pci_xe, d3cold_allowed);
 		igt_restore_runtime_pm();
 		xe_device_put(device.fd_xe);
-- 
2.25.1

[igt-dev] [PATCH i-g-t 2/2] test/xe_pm: Add vram_d3cold_threshold subtest

[Anshuman Gupta]

Adding a vram_d3cold_threshold subtest, which creates a Xe bo and
set the vram_d3cold_threshold according to vram used and bo size.
Test setups the d3cold and expect card to be limited to d3hot.

Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com>
---
 tests/xe/xe_pm.c | 73 ++++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 73 insertions(+)

diff --git a/tests/xe/xe_pm.c b/tests/xe/xe_pm.c
index c71fce892..a5312b780 100644
--- a/tests/xe/xe_pm.c
+++ b/tests/xe/xe_pm.c
@@ -19,6 +19,7 @@
 #include "igt.h"
 #include "lib/igt_device.h"
 #include "lib/igt_pm.h"
+#include "lib/igt_sysfs.h"
 #include "lib/igt_syncobj.h"
 #include "lib/intel_reg.h"
 
@@ -30,6 +31,8 @@
 #define NO_SUSPEND -1
 #define NO_RPM -1
 
+#define SIZE (4096 * 1024)
+
 typedef struct {
 	int fd_xe;
 	struct pci_device *pci_xe;
@@ -77,6 +80,22 @@ static void set_d3cold_allowed(struct pci_device *pci,
 	close(fd);
 }
 
+static void set_vram_d3cold_threshold(int sysfs, uint64_t threshold)
+{
+	char path[64];
+	int ret;
+
+	sprintf(path, "device/vram_d3cold_threshold");
+
+	if (!faccessat(sysfs, path, R_OK | W_OK, 0))
+		ret = igt_sysfs_printf(sysfs, path, "%lu", threshold);
+	else
+		igt_warn("vram_d3cold_threshold is not present\n");
+
+	igt_info("ret value %d", ret);
+	igt_assert(ret > 0);
+}
+
 static bool setup_d3(device_t device, enum igt_acpi_d_state state)
 {
 	switch (state) {
@@ -359,6 +378,55 @@ NULL));
 		igt_assert(in_d3(device, d_state));
 }
 
+static void test_vram_d3cold_threshold(device_t device)
+{
+	struct drm_xe_query_mem_usage *mem_usage;
+	struct drm_xe_device_query query = {
+		.extensions = 0,
+		.query = DRM_XE_DEVICE_QUERY_MEM_USAGE,
+		.size = 0,
+		.data = 0,
+	};
+	uint64_t vram_used_mb = 0, vram_total_mb = 0, threshold, mmo;
+	uint32_t bo;
+	void *map;
+	int i, sysfs_fd;
+
+	igt_assert_eq(igt_ioctl(device.fd_xe, DRM_IOCTL_XE_DEVICE_QUERY, &query), 0);
+	igt_assert_neq(query.size, 0);
+
+	mem_usage = malloc(query.size);
+	igt_assert(mem_usage);
+
+	query.data = to_user_pointer(mem_usage);
+	igt_assert_eq(igt_ioctl(device.fd_xe, DRM_IOCTL_XE_DEVICE_QUERY, &query), 0);
+
+	for (i = 0; i < mem_usage->num_regions; i++) {
+		if (mem_usage->regions[i].mem_class == XE_MEM_REGION_CLASS_VRAM) {
+			vram_used_mb +=  (mem_usage->regions[i].used / (1024 * 1024));
+			vram_total_mb += (mem_usage->regions[i].total_size / (1024 * 1024));
+		}
+	}
+
+	bo = xe_bo_create_flags(device.fd_xe, 0, SIZE, vram_memory(device.fd_xe, 0));
+	mmo = xe_bo_mmap_offset(device.fd_xe, bo);
+	map = mmap(NULL, SIZE, PROT_WRITE, MAP_SHARED, device.fd_xe, mmo);
+	igt_assert(map != MAP_FAILED);
+
+	memset(map, 0, SIZE);
+	munmap(map, SIZE);
+	threshold = vram_used_mb + (SIZE / (1024 * 1024));
+	igt_require(threshold < vram_total_mb);
+	sysfs_fd = igt_sysfs_open(device.fd_xe);
+	set_vram_d3cold_threshold(sysfs_fd, threshold);
+	close(sysfs_fd);
+
+	/* Setup D3Cold but card should be in D0 */
+	igt_assert(setup_d3(device, IGT_ACPI_D3Cold));
+	igt_assert(in_d3(device, IGT_ACPI_D3Hot));
+	igt_assert(out_of_d3(device, IGT_ACPI_D3Cold));
+}
+
 igt_main
 {
 	struct drm_xe_engine_class_instance *hwe;
@@ -456,6 +524,11 @@ igt_main
 		}
 	}
 
+	igt_describe("Validate whether card is limited to d3hot, if vram used > vram threshold");
+	igt_subtest("vram-d3cold-threshold") {
+		test_vram_d3cold_threshold(device);
+	}
+
 	igt_fixture {
 		display_fini(&device);
 		set_d3cold_allowed(device.pci_xe, d3cold_allowed);
-- 
2.25.1

[igt-dev] ✗ Fi.CI.BUILD: failure for vram d3cold threshold test

[Patchwork]

== Series Details ==

Series: vram d3cold threshold test
URL   : https://patchwork.freedesktop.org/series/119914/
State : failure

== Summary ==

IGT patchset build failed on latest successful build
d8dc96b95c60e4737fdfa1664ce9b1dcebfdef60 tests/i915_pm_freq_api: Add a suspend subtest

ninja: Entering directory `/opt/igt/build'
[1/443] Generating version.h with a custom command.
[2/5] Generating xe_tests.rst with a custom command.
FAILED: docs/testplan/xe_tests.rst 
/usr/src/igt-gpu-tools/scripts/igt_doc.py --config /usr/src/igt-gpu-tools/tests/xe/xe_test_config.json --rest docs/testplan/xe_tests.rst --check-testlist --igt-build-path /opt/igt/build
Warning: Missing documentation for igt@xe_pm@vram-d3cold-threshold
ninja: build stopped: subcommand failed.

Re: [igt-dev] [PATCH i-g-t 1/2] tests/xe_pm : Add support to disable all crtc

[Riana Tauro]

Hi Anshuman

On 6/27/2023 4:52 PM, Anshuman Gupta wrote:
> xe_pm d3 test requires to disable all crtc in order to enter
> to d3 state therefore, adding the support to disable all crtc.
> 
> Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com>
> ---
>   tests/xe/xe_pm.c | 20 ++++++++++++++++++++
>   1 file changed, 20 insertions(+)
> 
> diff --git a/tests/xe/xe_pm.c b/tests/xe/xe_pm.c
> index 23b8246ed..c71fce892 100644
> --- a/tests/xe/xe_pm.c
> +++ b/tests/xe/xe_pm.c
> @@ -34,6 +34,7 @@ typedef struct {
>   	int fd_xe;
>   	struct pci_device *pci_xe;
>   	struct pci_device *pci_root;
> +	igt_display_t display;
>   } device_t;
>   
>   /* runtime_usage is only available if kernel build CONFIG_PM_ADVANCED_DEBUG */
> @@ -150,6 +151,23 @@ static bool out_of_d3(device_t device, enum igt_acpi_d_state state)
>   	return true;
>   }
>   
> +static void disable_all_crtc(device_t *device)
> +{
> +	if (!drmModeGetResources(device->fd_xe))
> +		return;
> +
> +	igt_display_require(&device->display, device->fd_xe);
> +	igt_modeset_disable_all_outputs(&device->display);
> +}
> +
> +static void display_fini(device_t *device)
> +{
> +	if (!drmModeGetResources(device->fd_xe))
> +		return;
> +
> +	igt_display_fini(&device->display);
> +}
> +
>   /**
>    * SUBTEST: %s-basic
>    * Description: set GPU state to %arg[1] and test suspend/autoresume
> @@ -378,6 +396,7 @@ igt_main
>   
>   		get_d3cold_allowed(device.pci_xe, d3cold_allowed);
>   		igt_assert(igt_setup_runtime_pm(device.fd_xe));
> +		disable_all_crtc(&device);
Should this be added in setup_d3 instead of fixture? The suspend tests 
will also be executed with crtc disabled otherwise

Thanks
Riana


>   	}
>   
>   	for (const struct s_state *s = s_states; s->name; s++) {
> @@ -438,6 +457,7 @@ igt_main
>   	}
>   
>   	igt_fixture {
> +		display_fini(&device);
>   		set_d3cold_allowed(device.pci_xe, d3cold_allowed);
>   		igt_restore_runtime_pm();
>   		xe_device_put(device.fd_xe);

Re: [igt-dev] [PATCH i-g-t 1/2] tests/xe_pm : Add support to disable all crtc

[Gupta, Anshuman]

> -----Original Message-----
> From: Tauro, Riana <riana.tauro@intel.com>
> Sent: Wednesday, June 28, 2023 4:48 PM
> To: Gupta, Anshuman <anshuman.gupta@intel.com>; igt-
> dev@lists.freedesktop.org
> Cc: Dixit, Ashutosh <ashutosh.dixit@intel.com>;
> kamil.konieczny@linux.intel.com; Nilawar, Badal <badal.nilawar@intel.com>
> Subject: Re: [PATCH i-g-t 1/2] tests/xe_pm : Add support to disable all crtc
> 
> 
> Hi Anshuman
> 
> On 6/27/2023 4:52 PM, Anshuman Gupta wrote:
> > xe_pm d3 test requires to disable all crtc in order to enter to d3
> > state therefore, adding the support to disable all crtc.
> >
> > Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com>
> > ---
> >   tests/xe/xe_pm.c | 20 ++++++++++++++++++++
> >   1 file changed, 20 insertions(+)
> >
> > diff --git a/tests/xe/xe_pm.c b/tests/xe/xe_pm.c index
> > 23b8246ed..c71fce892 100644
> > --- a/tests/xe/xe_pm.c
> > +++ b/tests/xe/xe_pm.c
> > @@ -34,6 +34,7 @@ typedef struct {
> >   	int fd_xe;
> >   	struct pci_device *pci_xe;
> >   	struct pci_device *pci_root;
> > +	igt_display_t display;
> >   } device_t;
> >
> >   /* runtime_usage is only available if kernel build
> > CONFIG_PM_ADVANCED_DEBUG */ @@ -150,6 +151,23 @@ static bool
> out_of_d3(device_t device, enum igt_acpi_d_state state)
> >   	return true;
> >   }
> >
> > +static void disable_all_crtc(device_t *device) {
> > +	if (!drmModeGetResources(device->fd_xe))
> > +		return;
> > +
> > +	igt_display_require(&device->display, device->fd_xe);
> > +	igt_modeset_disable_all_outputs(&device->display);
> > +}
> > +
> > +static void display_fini(device_t *device) {
> > +	if (!drmModeGetResources(device->fd_xe))
> > +		return;
> > +
> > +	igt_display_fini(&device->display);
> > +}
> > +
> >   /**
> >    * SUBTEST: %s-basic
> >    * Description: set GPU state to %arg[1] and test suspend/autoresume
> > @@ -378,6 +396,7 @@ igt_main
> >
> >   		get_d3cold_allowed(device.pci_xe, d3cold_allowed);
> >   		igt_assert(igt_setup_runtime_pm(device.fd_xe));
> > +		disable_all_crtc(&device);
> Should this be added in setup_d3 instead of fixture? The suspend tests will
> also be executed with crtc disabled otherwise
Yes that is intentional to keep as separate patch to pass other test as well.
> 
> Thanks
> Riana
> 
> 
> >   	}
> >
> >   	for (const struct s_state *s = s_states; s->name; s++) { @@ -438,6
> > +457,7 @@ igt_main
> >   	}
> >
> >   	igt_fixture {
> > +		display_fini(&device);
> >   		set_d3cold_allowed(device.pci_xe, d3cold_allowed);
> >   		igt_restore_runtime_pm();
> >   		xe_device_put(device.fd_xe);

[igt-dev] [PATCH i-g-t 2/2] test/xe_pm: Add vram_d3cold_threshold subtest

[Anshuman Gupta]

Adding a vram_d3cold_threshold subtest, which creates a Xe bo and
set the vram_d3cold_threshold according to vram used and bo size.
Test setups the d3cold and expect card to be limited to d3hot.

v2:
- Add subtest doc.
v3:
- skip the test on igfx. [Riana]
- Test doc enhancement. [Riana]
- Create the bo before vram query. [Riana]
- Use xe_bo_map insead of xe_bo_mmap_offset and mmap. [Riana]
- Close the bo handle. [Riana]
v3:
- Restore the vram_d3cold_threshold value. [Badal]
- Don't fail the test if there is no vram_d3cold_threshold.
- Test d3cold after closing the xe BO.

Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
---
 tests/xe/xe_pm.c | 121 +++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 121 insertions(+)

diff --git a/tests/xe/xe_pm.c b/tests/xe/xe_pm.c
index 23b8246ed..c9f2e57ea 100644
--- a/tests/xe/xe_pm.c
+++ b/tests/xe/xe_pm.c
@@ -19,6 +19,7 @@
 #include "igt.h"
 #include "lib/igt_device.h"
 #include "lib/igt_pm.h"
+#include "lib/igt_sysfs.h"
 #include "lib/igt_syncobj.h"
 #include "lib/intel_reg.h"
 
@@ -30,12 +31,16 @@
 #define NO_SUSPEND -1
 #define NO_RPM -1
 
+#define SIZE (4096 * 1024)
+
 typedef struct {
 	int fd_xe;
 	struct pci_device *pci_xe;
 	struct pci_device *pci_root;
 } device_t;
 
+uint64_t orig_threshold;
+
 /* runtime_usage is only available if kernel build CONFIG_PM_ADVANCED_DEBUG */
 static bool runtime_usage_available(struct pci_device *pci)
 {
@@ -76,6 +81,49 @@ static void set_d3cold_allowed(struct pci_device *pci,
 	close(fd);
 }
 
+static uint64_t get_vram_d3cold_threshold(int sysfs)
+{
+	uint64_t threshold;
+	char path[64];
+	int ret;
+
+	sprintf(path, "device/vram_d3cold_threshold");
+	igt_require_f(!faccessat(sysfs, path, R_OK, 0), "vram_d3cold_threshold is not present\n");
+
+	ret = igt_sysfs_scanf(sysfs, path, "%lu", &threshold);
+	igt_assert(ret > 0);
+
+	return threshold;
+}
+
+static void set_vram_d3cold_threshold(int sysfs, uint64_t threshold)
+{
+	char path[64];
+	int ret;
+
+	sprintf(path, "device/vram_d3cold_threshold");
+
+	if (!faccessat(sysfs, path, R_OK | W_OK, 0))
+		ret = igt_sysfs_printf(sysfs, path, "%lu", threshold);
+	else
+		igt_warn("vram_d3cold_threshold is not present\n");
+
+	igt_assert(ret > 0);
+}
+
+static void vram_d3cold_threshold_restore(int sig)
+{
+	int fd, sysfs_fd;
+
+	fd = drm_open_driver(DRIVER_XE);
+	sysfs_fd = igt_sysfs_open(fd);
+
+	set_vram_d3cold_threshold(sysfs_fd, orig_threshold);
+
+	close(sysfs_fd);
+	close(fd);
+}
+
 static bool setup_d3(device_t device, enum igt_acpi_d_state state)
 {
 	switch (state) {
@@ -341,11 +389,75 @@ NULL));
 		igt_assert(in_d3(device, d_state));
 }
 
+/**
+ * SUBTEST: vram-d3cold-threshold
+ * Description:
+ *	Validate whether card is limited to d3hot while vram used
+ *	is greater than vram_d3cold_threshold.
+ * Run type: FULL
+ */
+static void test_vram_d3cold_threshold(device_t device, int sysfs_fd)
+{
+	struct drm_xe_query_mem_usage *mem_usage;
+	struct drm_xe_device_query query = {
+		.extensions = 0,
+		.query = DRM_XE_DEVICE_QUERY_MEM_USAGE,
+		.size = 0,
+		.data = 0,
+	};
+	uint64_t vram_used_mb = 0, vram_total_mb = 0, threshold;
+	uint32_t bo, flags;
+	void *map;
+	int i;
+
+	igt_require(xe_has_vram(device.fd_xe));
+
+	flags = vram_memory(device.fd_xe, 0);
+	igt_require_f(flags, "Device doesn't support vram memory region\n");
+
+	igt_assert_eq(igt_ioctl(device.fd_xe, DRM_IOCTL_XE_DEVICE_QUERY, &query), 0);
+	igt_assert_neq(query.size, 0);
+
+	mem_usage = malloc(query.size);
+	igt_assert(mem_usage);
+
+	query.data = to_user_pointer(mem_usage);
+	igt_assert_eq(igt_ioctl(device.fd_xe, DRM_IOCTL_XE_DEVICE_QUERY, &query), 0);
+
+	for (i = 0; i < mem_usage->num_regions; i++) {
+		if (mem_usage->regions[i].mem_class == XE_MEM_REGION_CLASS_VRAM) {
+			vram_used_mb +=  (mem_usage->regions[i].used / (1024 * 1024));
+			vram_total_mb += (mem_usage->regions[i].total_size / (1024 * 1024));
+		}
+	}
+
+	threshold = vram_used_mb;
+	igt_require(threshold < vram_total_mb);
+
+	bo = xe_bo_create_flags(device.fd_xe, 0, SIZE, flags);
+	map = xe_bo_map(device.fd_xe, bo, SIZE);
+	memset(map, 0, SIZE);
+	munmap(map, SIZE);
+	set_vram_d3cold_threshold(sysfs_fd, threshold);
+
+	/* Setup D3Cold but card should be in D3hot */
+	igt_assert(setup_d3(device, IGT_ACPI_D3Cold));
+	sleep(1);
+	igt_assert(in_d3(device, IGT_ACPI_D3Hot));
+	igt_assert(out_of_d3(device, IGT_ACPI_D3Cold));
+	gem_close(device.fd_xe, bo);
+
+	/* Test D3Cold again after free up the Xe BO */
+	sleep(1);
+	igt_assert(in_d3(device, IGT_ACPI_D3Cold));
+}
+
 igt_main
 {
 	struct drm_xe_engine_class_instance *hwe;
 	device_t device;
 	char d3cold_allowed[2];
+	int sysfs_fd;
 	const struct s_state {
 		const char *name;
 		enum igt_suspend_state state;
@@ -378,6 +490,7 @@ igt_main
 
 		get_d3cold_allowed(device.pci_xe, d3cold_allowed);
 		igt_assert(igt_setup_runtime_pm(device.fd_xe));
+		sysfs_fd = igt_sysfs_open(device.fd_xe);
 	}
 
 	for (const struct s_state *s = s_states; s->name; s++) {
@@ -437,7 +550,15 @@ igt_main
 		}
 	}
 
+	igt_describe("Validate whether card is limited to d3hot, if vram used > vram threshold");
+	igt_subtest("vram-d3cold-threshold") {
+		orig_threshold = get_vram_d3cold_threshold(sysfs_fd);
+		igt_install_exit_handler(vram_d3cold_threshold_restore);
+		test_vram_d3cold_threshold(device, sysfs_fd);
+	}
+
 	igt_fixture {
+		close(sysfs_fd);
 		set_d3cold_allowed(device.pci_xe, d3cold_allowed);
 		igt_restore_runtime_pm();
 		xe_device_put(device.fd_xe);
-- 
2.25.1