From: Sean Paul <sean@poorly.run>
To: igt-dev@lists.freedesktop.org
Cc: Sean Paul <seanpaul@chromium.org>
Subject: [igt-dev] [PATCH v2 1/8] tests/kms_vrr: Move fb0 and fb1 to an array
Date: Mon, 23 Oct 2023 20:56:31 +0000 [thread overview]
Message-ID: <20231023205910.3556533-2-sean@poorly.run> (raw)
In-Reply-To: <20231023205910.3556533-1-sean@poorly.run>
From: Sean Paul <seanpaul@chromium.org>
Consolidate the 2 fb variables into an array. No functional changes.
Cc: Mark Yacoub <markyacoub@chromium.org>
Reviewed-by: Bhanuprakash Modem <bhanuprakash.modem@intel.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Changes in v2:
- Clarified commit msg (Bhanu)
---
tests/kms_vrr.c | 19 +++++++++----------
1 file changed, 9 insertions(+), 10 deletions(-)
diff --git a/tests/kms_vrr.c b/tests/kms_vrr.c
index e203fd4d5..4eeae4747 100644
--- a/tests/kms_vrr.c
+++ b/tests/kms_vrr.c
@@ -100,8 +100,7 @@ typedef struct data {
igt_display_t display;
int drm_fd;
igt_plane_t *primary;
- igt_fb_t fb0;
- igt_fb_t fb1;
+ igt_fb_t fb[2];
range_t range;
} data_t;
@@ -268,13 +267,13 @@ static void prepare_test(data_t *data, igt_output_t *output, enum pipe pipe)
/* Prepare resources */
igt_create_color_fb(data->drm_fd, mode.hdisplay, mode.vdisplay,
DRM_FORMAT_XRGB8888, DRM_FORMAT_MOD_LINEAR,
- 0.50, 0.50, 0.50, &data->fb0);
+ 0.50, 0.50, 0.50, &data->fb[0]);
igt_create_color_fb(data->drm_fd, mode.hdisplay, mode.vdisplay,
DRM_FORMAT_XRGB8888, DRM_FORMAT_MOD_LINEAR,
- 0.50, 0.50, 0.50, &data->fb1);
+ 0.50, 0.50, 0.50, &data->fb[1]);
- cr = igt_get_cairo_ctx(data->drm_fd, &data->fb0);
+ cr = igt_get_cairo_ctx(data->drm_fd, &data->fb[0]);
igt_paint_color(cr, 0, 0, mode.hdisplay / 10, mode.vdisplay / 10,
1.00, 0.00, 0.00);
@@ -283,7 +282,7 @@ static void prepare_test(data_t *data, igt_output_t *output, enum pipe pipe)
/* Take care of any required modesetting before the test begins. */
data->primary = igt_output_get_plane_type(output, DRM_PLANE_TYPE_PRIMARY);
- igt_plane_set_fb(data->primary, &data->fb0);
+ igt_plane_set_fb(data->primary, &data->fb[0]);
/* Clear vrr_enabled state before enabling it, because
* it might be left enabled if the previous test fails.
@@ -333,7 +332,7 @@ flip_and_measure(data_t *data, igt_output_t *output, enum pipe pipe,
vtest_ns_t vtest_ns = get_test_rate_ns(data->range);
/* Align with the flip completion event to speed up convergence. */
- do_flip(data, &data->fb0);
+ do_flip(data, &data->fb[0]);
start_ns = last_event_ns = target_ns = get_kernel_event_ns(data,
DRM_EVENT_FLIP_COMPLETE);
@@ -342,7 +341,7 @@ flip_and_measure(data_t *data, igt_output_t *output, enum pipe pipe,
int64_t diff_ns;
front = !front;
- do_flip(data, front ? &data->fb1 : &data->fb0);
+ do_flip(data, front ? &data->fb[1] : &data->fb[0]);
/* We need to cpture flip event instead of vblank event,
* because vblank is triggered after each frame, but depending
@@ -492,8 +491,8 @@ test_basic(data_t *data, enum pipe pipe, igt_output_t *output, uint32_t flags)
igt_output_override_mode(output, NULL);
igt_display_commit2(&data->display, COMMIT_ATOMIC);
- igt_remove_fb(data->drm_fd, &data->fb1);
- igt_remove_fb(data->drm_fd, &data->fb0);
+ igt_remove_fb(data->drm_fd, &data->fb[1]);
+ igt_remove_fb(data->drm_fd, &data->fb[0]);
}
/* Runs tests on outputs that are VRR capable. */
--
Sean Paul, Software Engineer, Google / Chromium OS
next prev parent reply other threads:[~2023-10-23 20:59 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-10-23 20:56 [igt-dev] [PATCH v2 0/8] tests/kms_vrr: Modify kms_vrr to allow flicker profiling Sean Paul
2023-10-23 20:56 ` Sean Paul [this message]
2023-10-23 20:56 ` [igt-dev] [PATCH v2 2/8] tests/kms_vrr: Move vtest_ns into data_t Sean Paul
2023-10-23 20:56 ` [igt-dev] [PATCH v2 3/8] tests/kms_vrr: Allow test rate to be altered from the command line Sean Paul
2023-10-23 20:56 ` [igt-dev] [PATCH v2 4/8] tests/kms_vrr: Allow test duration to be specified " Sean Paul
2023-11-16 8:25 ` Modem, Bhanuprakash
2023-10-23 20:56 ` [igt-dev] [PATCH v2 5/8] tests/kms_vrr: Change the pattern displayed in the test Sean Paul
2023-11-16 8:25 ` Modem, Bhanuprakash
2023-12-18 4:36 ` Modem, Bhanuprakash
2023-12-18 4:36 ` Modem, Bhanuprakash
2023-10-23 20:56 ` [igt-dev] [PATCH v2 6/8] tests/kms_vrr: Add ability to flip static image for flicker profiling Sean Paul
2023-11-16 8:24 ` Modem, Bhanuprakash
2023-10-23 20:56 ` [igt-dev] [PATCH v2 7/8] tests/kms_vrr: Allow for multiple rates in a test Sean Paul
2023-11-16 8:24 ` Modem, Bhanuprakash
2023-10-23 20:56 ` [igt-dev] [PATCH v2 8/8] tests/kms_vrr: Add a max/min test to oscillate between rates Sean Paul
2023-11-16 8:24 ` Modem, Bhanuprakash
2023-10-24 7:42 ` [igt-dev] ✗ Fi.CI.BUILD: failure for tests/kms_vrr: Modify kms_vrr to allow flicker profiling Patchwork
2023-10-24 7:45 ` [igt-dev] ✗ GitLab.Pipeline: warning " Patchwork
2023-11-14 16:19 ` [igt-dev] [PATCH v2 0/8] " Sean Paul
2023-12-14 6:41 ` Modem, Bhanuprakash
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20231023205910.3556533-2-sean@poorly.run \
--to=sean@poorly.run \
--cc=igt-dev@lists.freedesktop.org \
--cc=seanpaul@chromium.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox