From: Lyude Paul <lyude@redhat.com>
To: Paul Kocialkowski <paul.kocialkowski@bootlin.com>,
igt-dev@lists.freedesktop.org
Cc: Petri Latvala <petri.latvala@intel.com>,
Eben Upton <eben@raspberrypi.org>,
Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Subject: Re: [igt-dev] [PATCH i-g-t v3 00/21] Chamelium VC4 plane fuzzy testing, with SAND and T-tiled mode
Date: Mon, 14 Jan 2019 19:46:59 -0500 [thread overview]
Message-ID: <fe5ffd213f59accdd0407fd46e02094fc6f3c2b7.camel@redhat.com> (raw)
In-Reply-To: <20190111090532.19235-1-paul.kocialkowski@bootlin.com>
Got up to patch #8, but I haven't finished reviewing yet. Will try to get that
done first thing tommorrow
For now, 1-7 lgtm
On Fri, 2019-01-11 at 10:05 +0100, Paul Kocialkowski wrote:
> This series introduces the required plumbing for allocating buffers in
> the VC4 T-tiled and SAND_tiled modes, along with helpers to convert to
> these tiling modes.
>
> A new "checkerboard" comparison method is introduced to check whether
> captured frames match their references in cases where pixel-perfect
> results are not possible (e.g. with scaling) and the analog test does
> not provide reliable results.
>
> With that in place, new tests for the Chamelium are introduced to
> perform testing of planes with randomized properties, both with a
> CRC and frame comparison fashion.
>
> This series is based on version 3 of Maxime Ripard's series:
> igt: chamelium: Test YUV buffers using the Chamelium
>
> Changes since v2:
> * Added support for SAND tiling;
> * Generalized T-tiling to support both 16 and 32 bpp;
> * Split the main test into more sub-functions;
> * Removed explicit lists of DRM formats;
> * Added helper to list known DRM formats;
> * Various functional fixes in the main test;
> * Removed unnecessary pointer init in map_bo;
> * Rebased on v3 of Maxime Ripard's YUV series;
> * Added collected Reviewed-By tags;
>
> Changes since v1:
> * Added collected Reviewed-by tags;
> * Removed explicit size and constified tiling read order tables;
> * Removed unnecessary MAP_FAILED addition in map_bo;
> * Added pipe and output helpers to count and iterate planes of a given type;
> * Moved CRC debug prints to the chamelium library;
> * Fixed destination stride description for igt_fb_convert_with_stride;
> * Split planes test into a few sub-routines;
> * Removed explicit underrun detection since general error reporting is
> enough;
> * Removed underrun detection bits due to ongoing Chamelium-specific issues;
> * Deconfigured planes before removing their framebuffer, avoiding kmsg
> errors.
>
> Paul Kocialkowski (21):
> lib: drmtest: Add helpers to check and require the VC4 driver
> lib/igt_fb: Add checks on i915 for i915-specific tiled buffer
> allocation
> lib/igt_fb: Add support for allocating T-tiled VC4 buffers
> lib/igt_fb: Add support for VC4 SAND tiling modes
> lib/igt_fb: Allow interpreting the tile height as a stride equivalent
> lib/igt_fb: Add a stride-provisioned fashion of igt_fb_convert
> lib/igt_fb: Add a helper to retreive the plane bpp for a given format
> lib/igt_fb: Add a helper to fill-in the available DRM formats
> lib/igt_vc4: Add helpers for converting linear to T-tiled RGB buffers
> lib/igt_vc4: Add helper for checking T-tiling support on plane
> lib/igt_vc4: Add helpers for converting linear to SAND-tiled buffers
> lib/igt_vc4: Add helper for checking SAND tiling support on plane
> lib/igt_kms: Add helpers to count and iterate planes from pipe
> lib/igt_kms: Add helpers to count and iterate planes from output
> lib/igt_chamelium: Fixup resources liberation in comparison helpers
> lib/igt_chamelium: Split frames dump logic and rework surroundings
> lib/igt_chamelium: Generalize the frame match helper with check type
> lib/igt_frame: Add a checkerboard frame comparison method
> lib/igt_chamelium: Hook-in checkerboard comparison method in helpers
> chamelium: Move the YUV tests over to the checkerboard checking method
> chamelium: Add a display test for randomized planes
>
> lib/drmtest.c | 10 +
> lib/drmtest.h | 2 +
> lib/igt_chamelium.c | 124 +++++++----
> lib/igt_chamelium.h | 15 +-
> lib/igt_fb.c | 144 ++++++++++++-
> lib/igt_fb.h | 6 +
> lib/igt_frame.c | 121 +++++++++++
> lib/igt_frame.h | 2 +
> lib/igt_kms.c | 84 ++++++++
> lib/igt_kms.h | 6 +
> lib/igt_vc4.c | 242 +++++++++++++++++++++
> lib/igt_vc4.h | 42 ++++
> tests/kms_chamelium.c | 481 ++++++++++++++++++++++++++++++++++++++++--
> 13 files changed, 1204 insertions(+), 75 deletions(-)
>
--
Cheers,
Lyude Paul
_______________________________________________
igt-dev mailing list
igt-dev@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/igt-dev
next prev parent reply other threads:[~2019-01-15 0:47 UTC|newest]
Thread overview: 67+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-01-11 9:05 [igt-dev] [PATCH i-g-t v3 00/21] Chamelium VC4 plane fuzzy testing, with SAND and T-tiled mode Paul Kocialkowski
2019-01-11 9:05 ` [igt-dev] [PATCH i-g-t v3 01/21] lib: drmtest: Add helpers to check and require the VC4 driver Paul Kocialkowski
2019-01-11 9:05 ` [igt-dev] [PATCH i-g-t v3 02/21] lib/igt_fb: Add checks on i915 for i915-specific tiled buffer allocation Paul Kocialkowski
2019-01-11 15:09 ` Maxime Ripard
2019-01-15 0:39 ` Lyude Paul
2019-01-11 9:05 ` [igt-dev] [PATCH i-g-t v3 03/21] lib/igt_fb: Add support for allocating T-tiled VC4 buffers Paul Kocialkowski
2019-01-11 15:09 ` Maxime Ripard
2019-01-15 0:41 ` Lyude Paul
2019-01-11 9:05 ` [igt-dev] [PATCH i-g-t v3 04/21] lib/igt_fb: Add support for VC4 SAND tiling modes Paul Kocialkowski
2019-01-11 15:09 ` Maxime Ripard
2019-01-15 0:43 ` Lyude Paul
2019-01-11 9:05 ` [igt-dev] [PATCH i-g-t v3 05/21] lib/igt_fb: Allow interpreting the tile height as a stride equivalent Paul Kocialkowski
2019-01-11 15:10 ` Maxime Ripard
2019-01-15 0:45 ` Lyude Paul
2019-01-11 9:05 ` [igt-dev] [PATCH i-g-t v3 06/21] lib/igt_fb: Add a stride-provisioned fashion of igt_fb_convert Paul Kocialkowski
2019-01-11 9:05 ` [igt-dev] [PATCH i-g-t v3 07/21] lib/igt_fb: Add a helper to retreive the plane bpp for a given format Paul Kocialkowski
2019-01-11 9:05 ` [igt-dev] [PATCH i-g-t v3 08/21] lib/igt_fb: Add a helper to fill-in the available DRM formats Paul Kocialkowski
2019-01-15 20:49 ` Lyude Paul
2019-01-11 9:05 ` [igt-dev] [PATCH i-g-t v3 09/21] lib/igt_vc4: Add helpers for converting linear to T-tiled RGB buffers Paul Kocialkowski
2019-01-11 15:25 ` Maxime Ripard
2019-01-14 14:57 ` Paul Kocialkowski
2019-01-15 21:20 ` Lyude Paul
2019-01-22 16:07 ` Paul Kocialkowski
2019-01-22 17:47 ` Lyude Paul
2019-01-11 9:05 ` [igt-dev] [PATCH i-g-t v3 10/21] lib/igt_vc4: Add helper for checking T-tiling support on plane Paul Kocialkowski
2019-01-11 15:11 ` Maxime Ripard
2019-01-15 21:49 ` Lyude Paul
2019-01-11 9:05 ` [igt-dev] [PATCH i-g-t v3 11/21] lib/igt_vc4: Add helpers for converting linear to SAND-tiled buffers Paul Kocialkowski
2019-01-15 21:53 ` Lyude Paul
2019-01-11 9:05 ` [igt-dev] [PATCH i-g-t v3 12/21] lib/igt_vc4: Add helper for checking SAND tiling support on plane Paul Kocialkowski
2019-01-11 15:15 ` Maxime Ripard
2019-01-14 15:01 ` Paul Kocialkowski
2019-01-15 8:25 ` Maxime Ripard
2019-01-15 21:54 ` Lyude Paul
2019-01-11 9:05 ` [igt-dev] [PATCH i-g-t v3 13/21] lib/igt_kms: Add helpers to count and iterate planes from pipe Paul Kocialkowski
2019-01-11 15:11 ` Maxime Ripard
2019-01-15 21:57 ` Lyude Paul
2019-01-11 9:05 ` [igt-dev] [PATCH i-g-t v3 14/21] lib/igt_kms: Add helpers to count and iterate planes from output Paul Kocialkowski
2019-01-11 15:12 ` Maxime Ripard
2019-01-15 22:00 ` Lyude Paul
2019-01-11 9:05 ` [igt-dev] [PATCH i-g-t v3 15/21] lib/igt_chamelium: Fixup resources liberation in comparison helpers Paul Kocialkowski
2019-01-11 15:15 ` Maxime Ripard
2019-01-15 22:01 ` Lyude Paul
2019-01-11 9:05 ` [igt-dev] [PATCH i-g-t v3 16/21] lib/igt_chamelium: Split frames dump logic and rework surroundings Paul Kocialkowski
2019-01-11 15:16 ` Maxime Ripard
2019-01-15 22:05 ` Lyude Paul
2019-01-11 9:05 ` [igt-dev] [PATCH i-g-t v3 17/21] lib/igt_chamelium: Generalize the frame match helper with check type Paul Kocialkowski
2019-01-11 15:17 ` Maxime Ripard
2019-01-15 22:07 ` Lyude Paul
2019-01-11 9:05 ` [igt-dev] [PATCH i-g-t v3 18/21] lib/igt_frame: Add a checkerboard frame comparison method Paul Kocialkowski
2019-01-11 15:19 ` Maxime Ripard
2019-01-14 15:04 ` Paul Kocialkowski
2019-01-15 16:13 ` Maxime Ripard
2019-01-15 22:14 ` Lyude Paul
2019-01-11 9:05 ` [igt-dev] [PATCH i-g-t v3 19/21] lib/igt_chamelium: Hook-in checkerboard comparison method in helpers Paul Kocialkowski
2019-01-11 15:19 ` Maxime Ripard
2019-01-15 22:14 ` Lyude Paul
2019-01-11 9:05 ` [igt-dev] [PATCH i-g-t v3 20/21] chamelium: Move the YUV tests over to the checkerboard checking method Paul Kocialkowski
2019-01-11 15:20 ` Maxime Ripard
2019-01-15 22:15 ` Lyude Paul
2019-01-11 9:05 ` [igt-dev] [PATCH i-g-t v3 21/21] chamelium: Add a display test for randomized planes Paul Kocialkowski
2019-01-11 15:23 ` Maxime Ripard
2019-01-15 22:56 ` Lyude Paul
2019-01-25 13:58 ` Paul Kocialkowski
2019-01-11 9:29 ` [igt-dev] ✗ Fi.CI.BAT: failure for Chamelium VC4 plane fuzzy testing, with SAND and T-tiled mode Patchwork
2019-01-15 0:46 ` Lyude Paul [this message]
2019-01-15 9:34 ` [igt-dev] [PATCH i-g-t v3 00/21] " Paul Kocialkowski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=fe5ffd213f59accdd0407fd46e02094fc6f3c2b7.camel@redhat.com \
--to=lyude@redhat.com \
--cc=eben@raspberrypi.org \
--cc=igt-dev@lists.freedesktop.org \
--cc=paul.kocialkowski@bootlin.com \
--cc=petri.latvala@intel.com \
--cc=thomas.petazzoni@bootlin.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox