From: Frank Li <Frank.Li@nxp.com>
To: Shawn Guo <shawnguo@kernel.org>, Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
linux-arm-kernel@lists.infradead.org (moderated
list:ARM/FREESCALE LAYERSCAPE ARM ARCHITECTURE),
devicetree@vger.kernel.org (open list:OPEN FIRMWARE AND
FLATTENED DEVICE TREE BINDINGS),
linux-kernel@vger.kernel.org (open list)
Cc: imx@lists.linux.dev
Subject: [PATCH v2 05/13] arm64: dts: layerscape: replace node name 'nor' with 'flash'
Date: Wed, 26 Jun 2024 16:25:25 -0400 [thread overview]
Message-ID: <20240626202533.2182846-6-Frank.Li@nxp.com> (raw)
In-Reply-To: <20240626202533.2182846-1-Frank.Li@nxp.com>
Replace node name 'nor' with 'flash' to fix below CHECK_DTBS warning.
nor@0,0: $nodename:0: 'nor@0,0' does not match '^(flash|.*sram|nand)(@.*)?$'
Signed-off-by: Frank Li <Frank.Li@nxp.com>
---
arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts | 2 +-
arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts | 2 +-
arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts | 2 +-
arch/arm64/boot/dts/freescale/fsl-ls1088a-qds.dts | 2 +-
arch/arm64/boot/dts/freescale/fsl-ls208xa-qds.dtsi | 2 +-
arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi | 2 +-
6 files changed, 6 insertions(+), 6 deletions(-)
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts
index dda27ed7aaf2b..11b1356e95d5b 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts
@@ -64,7 +64,7 @@ &ifc {
0x2 0x0 0x0 0x7fb00000 0x00000100>;
status = "okay";
- nor@0,0 {
+ flash@0,0 {
compatible = "cfi-flash";
reg = <0x0 0x0 0x8000000>;
big-endian;
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts
index 26f8540cb101b..5f6e57cf91981 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts
@@ -71,7 +71,7 @@ &ifc {
0x1 0x0 0x0 0x7e800000 0x00010000
0x2 0x0 0x0 0x7fb00000 0x00000100>;
- nor@0,0 {
+ flash@0,0 {
compatible = "cfi-flash";
#address-cells = <1>;
#size-cells = <1>;
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts
index 3b0ed9305f2bd..e5296e51f656f 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts
@@ -151,7 +151,7 @@ &ifc {
0x2 0x0 0x0 0x7fb00000 0x00000100>;
status = "okay";
- nor@0,0 {
+ flash@0,0 {
compatible = "cfi-flash";
reg = <0x0 0x0 0x8000000>;
big-endian;
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1088a-qds.dts
index aa52ff73ff9e0..d238a8440a814 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1088a-qds.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a-qds.dts
@@ -113,7 +113,7 @@ &ifc {
3 0 0x5 0x20000000 0x00010000>;
status = "okay";
- nor@0,0 {
+ flash@0,0 {
compatible = "cfi-flash";
reg = <0x0 0x0 0x8000000>;
bank-width = <2>;
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls208xa-qds.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls208xa-qds.dtsi
index e2c94da6d6e82..9178cd61c7869 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls208xa-qds.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls208xa-qds.dtsi
@@ -43,7 +43,7 @@ &ifc {
0x2 0x0 0x5 0x30000000 0x00010000
0x3 0x0 0x5 0x20000000 0x00010000>;
- nor@0,0 {
+ flash@0,0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "cfi-flash";
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi
index 537cecb13dd08..69cd05a30b853 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi
@@ -21,7 +21,7 @@ &ifc {
0x2 0x0 0x5 0x30000000 0x00010000
0x3 0x0 0x5 0x20000000 0x00010000>;
- nor@0,0 {
+ flash@0,0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "cfi-flash";
--
2.34.1
next prev parent reply other threads:[~2024-06-26 20:26 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-06-26 20:25 [PATCH v2 00/13] arm64: dts: layerscaple: clean up some simple CHECK_WARNING Frank Li
2024-06-26 20:25 ` [PATCH v2 01/13] arm64: dts: layerscape: rename node 'timer' as 'rtc' Frank Li
2024-06-26 20:28 ` [PATCH v2 00/13] arm64: dts: layerscaple: clean up some simple CHECK_WARNING Frank Li
2024-06-27 10:37 ` Shawn Guo
2024-06-26 20:25 ` [PATCH v2 02/13] arm64: dts: layerscape: add platform special compatible string for gpio Frank Li
2024-07-01 16:43 ` Rob Herring
2024-07-01 18:51 ` Frank Li
2024-06-26 20:25 ` [PATCH v2 03/13] arm64: dts: fsl-lx2160a: fix #address-cells for pinctrl-single Frank Li
2024-06-26 20:25 ` [PATCH v2 04/13] arm64: dts: fsl-ls1012a: remove property 'snps,host-vbus-glitches' Frank Li
2024-06-26 20:25 ` Frank Li [this message]
2024-06-26 20:25 ` [PATCH v2 06/13] arm64: dts: layerscape: remove compatible string 'fsl,fman-xmdio' for fman3 Frank Li
2024-06-26 20:25 ` [PATCH v2 07/13] arm64: dts: layerscaple: add #dma-cells for qdma Frank Li
2024-06-27 17:17 ` Rob Herring
2024-06-27 17:22 ` Rob Herring
2024-06-27 18:27 ` Frank Li
2024-06-28 2:34 ` Shawn Guo
2024-06-26 20:25 ` [PATCH v2 08/13] arm64: dts: layerscape: rename node name "wdt" to "watchdog" Frank Li
2024-06-26 20:25 ` [PATCH v2 09/13] arm64: dts: layerscape: change pcie interrupt order Frank Li
2024-06-26 20:25 ` [PATCH v2 10/13] arm64: dts: layerscape: rename aux_bus to aux-bus Frank Li
2024-06-26 20:25 ` [PATCH v2 11/13] arm64: dts: fsl-ls1043a: remove unused clk-name at watchdog node Frank Li
2024-06-26 20:25 ` [PATCH v2 12/13] arm64: dts: fsl-ls1046a: rename thermal node name Frank Li
2024-06-26 20:25 ` [PATCH v2 13/13] arm64: dts: layerscape: rename b(q)man-portals to b(q)man-portals-bus Frank Li
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240626202533.2182846-6-Frank.Li@nxp.com \
--to=frank.li@nxp.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=imx@lists.linux.dev \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=robh@kernel.org \
--cc=shawnguo@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox