From: Frank Li <Frank.Li@nxp.com>
To: Shawn Guo <shawnguo@kernel.org>, Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
linux-arm-kernel@lists.infradead.org (moderated
list:ARM/FREESCALE LAYERSCAPE ARM ARCHITECTURE),
devicetree@vger.kernel.org (open list:OPEN FIRMWARE AND
FLATTENED DEVICE TREE BINDINGS),
linux-kernel@vger.kernel.org (open list)
Cc: imx@lists.linux.dev
Subject: [PATCH v2 06/13] arm64: dts: layerscape: remove compatible string 'fsl,fman-xmdio' for fman3
Date: Wed, 26 Jun 2024 16:25:26 -0400 [thread overview]
Message-ID: <20240626202533.2182846-7-Frank.Li@nxp.com> (raw)
In-Reply-To: <20240626202533.2182846-1-Frank.Li@nxp.com>
Fman3 should use 'fsl,fman-memac-mdio'. 'fsl,fman-xmdio' is for fman2.
Fix below CHECK_DTBS warning.
fman@1a00000: mdio@eb000:compatible: ['fsl,fman-memac-mdio', 'fsl,fman-xmdio'] is too long
Signed-off-by: Frank Li <Frank.Li@nxp.com>
---
arch/arm64/boot/dts/freescale/qoriq-fman3-0-10g-0.dtsi | 2 +-
arch/arm64/boot/dts/freescale/qoriq-fman3-0-10g-1.dtsi | 2 +-
arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-0.dtsi | 2 +-
arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-1.dtsi | 2 +-
arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-2.dtsi | 2 +-
arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-3.dtsi | 2 +-
arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-4.dtsi | 2 +-
arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-5.dtsi | 2 +-
arch/arm64/boot/dts/freescale/qoriq-fman3-0.dtsi | 4 ++--
9 files changed, 10 insertions(+), 10 deletions(-)
diff --git a/arch/arm64/boot/dts/freescale/qoriq-fman3-0-10g-0.dtsi b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-10g-0.dtsi
index dbd2fc3ba790e..65f7b5a50eb51 100644
--- a/arch/arm64/boot/dts/freescale/qoriq-fman3-0-10g-0.dtsi
+++ b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-10g-0.dtsi
@@ -32,7 +32,7 @@ ethernet@f0000 {
mdio@f1000 {
#address-cells = <1>;
#size-cells = <0>;
- compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
+ compatible = "fsl,fman-memac-mdio";
reg = <0xf1000 0x1000>;
pcsphy6: ethernet-phy@0 {
diff --git a/arch/arm64/boot/dts/freescale/qoriq-fman3-0-10g-1.dtsi b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-10g-1.dtsi
index 6fc5d25600571..3f70482c98c30 100644
--- a/arch/arm64/boot/dts/freescale/qoriq-fman3-0-10g-1.dtsi
+++ b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-10g-1.dtsi
@@ -32,7 +32,7 @@ ethernet@f2000 {
mdio@f3000 {
#address-cells = <1>;
#size-cells = <0>;
- compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
+ compatible = "fsl,fman-memac-mdio";
reg = <0xf3000 0x1000>;
pcsphy7: ethernet-phy@0 {
diff --git a/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-0.dtsi b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-0.dtsi
index 4e02276fcf993..78841c1f32527 100644
--- a/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-0.dtsi
+++ b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-0.dtsi
@@ -31,7 +31,7 @@ ethernet@e0000 {
mdio@e1000 {
#address-cells = <1>;
#size-cells = <0>;
- compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
+ compatible = "fsl,fman-memac-mdio";
reg = <0xe1000 0x1000>;
pcsphy0: ethernet-phy@0 {
diff --git a/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-1.dtsi b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-1.dtsi
index 0312fa43fa777..1f43fa6662221 100644
--- a/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-1.dtsi
+++ b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-1.dtsi
@@ -31,7 +31,7 @@ ethernet@e2000 {
mdio@e3000 {
#address-cells = <1>;
#size-cells = <0>;
- compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
+ compatible = "fsl,fman-memac-mdio";
reg = <0xe3000 0x1000>;
pcsphy1: ethernet-phy@0 {
diff --git a/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-2.dtsi b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-2.dtsi
index af2df07971dd9..de0aa017701dd 100644
--- a/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-2.dtsi
+++ b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-2.dtsi
@@ -31,7 +31,7 @@ ethernet@e4000 {
mdio@e5000 {
#address-cells = <1>;
#size-cells = <0>;
- compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
+ compatible = "fsl,fman-memac-mdio";
reg = <0xe5000 0x1000>;
pcsphy2: ethernet-phy@0 {
diff --git a/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-3.dtsi b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-3.dtsi
index 4ac98dc8b2279..6904aa5d8e547 100644
--- a/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-3.dtsi
+++ b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-3.dtsi
@@ -31,7 +31,7 @@ ethernet@e6000 {
mdio@e7000 {
#address-cells = <1>;
#size-cells = <0>;
- compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
+ compatible = "fsl,fman-memac-mdio";
reg = <0xe7000 0x1000>;
pcsphy3: ethernet-phy@0 {
diff --git a/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-4.dtsi b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-4.dtsi
index bd932d8b0160b..a3d29d470297e 100644
--- a/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-4.dtsi
+++ b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-4.dtsi
@@ -31,7 +31,7 @@ ethernet@e8000 {
mdio@e9000 {
#address-cells = <1>;
#size-cells = <0>;
- compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
+ compatible = "fsl,fman-memac-mdio";
reg = <0xe9000 0x1000>;
pcsphy4: ethernet-phy@0 {
diff --git a/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-5.dtsi b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-5.dtsi
index 7de1c5203f3e2..01b78c0463a74 100644
--- a/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-5.dtsi
+++ b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-5.dtsi
@@ -31,7 +31,7 @@ ethernet@ea000 {
mdio@eb000 {
#address-cells = <1>;
#size-cells = <0>;
- compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
+ compatible = "fsl,fman-memac-mdio";
reg = <0xeb000 0x1000>;
pcsphy5: ethernet-phy@0 {
diff --git a/arch/arm64/boot/dts/freescale/qoriq-fman3-0.dtsi b/arch/arm64/boot/dts/freescale/qoriq-fman3-0.dtsi
index ae1c2abaaf362..b0390b711fef4 100644
--- a/arch/arm64/boot/dts/freescale/qoriq-fman3-0.dtsi
+++ b/arch/arm64/boot/dts/freescale/qoriq-fman3-0.dtsi
@@ -67,14 +67,14 @@ fman0_oh_0x7: port@87000 {
mdio0: mdio@fc000 {
#address-cells = <1>;
#size-cells = <0>;
- compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
+ compatible = "fsl,fman-memac-mdio";
reg = <0xfc000 0x1000>;
};
xmdio0: mdio@fd000 {
#address-cells = <1>;
#size-cells = <0>;
- compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
+ compatible = "fsl,fman-memac-mdio";
reg = <0xfd000 0x1000>;
};
};
--
2.34.1
next prev parent reply other threads:[~2024-06-26 20:26 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-06-26 20:25 [PATCH v2 00/13] arm64: dts: layerscaple: clean up some simple CHECK_WARNING Frank Li
2024-06-26 20:25 ` [PATCH v2 01/13] arm64: dts: layerscape: rename node 'timer' as 'rtc' Frank Li
2024-06-26 20:28 ` [PATCH v2 00/13] arm64: dts: layerscaple: clean up some simple CHECK_WARNING Frank Li
2024-06-27 10:37 ` Shawn Guo
2024-06-26 20:25 ` [PATCH v2 02/13] arm64: dts: layerscape: add platform special compatible string for gpio Frank Li
2024-07-01 16:43 ` Rob Herring
2024-07-01 18:51 ` Frank Li
2024-06-26 20:25 ` [PATCH v2 03/13] arm64: dts: fsl-lx2160a: fix #address-cells for pinctrl-single Frank Li
2024-06-26 20:25 ` [PATCH v2 04/13] arm64: dts: fsl-ls1012a: remove property 'snps,host-vbus-glitches' Frank Li
2024-06-26 20:25 ` [PATCH v2 05/13] arm64: dts: layerscape: replace node name 'nor' with 'flash' Frank Li
2024-06-26 20:25 ` Frank Li [this message]
2024-06-26 20:25 ` [PATCH v2 07/13] arm64: dts: layerscaple: add #dma-cells for qdma Frank Li
2024-06-27 17:17 ` Rob Herring
2024-06-27 17:22 ` Rob Herring
2024-06-27 18:27 ` Frank Li
2024-06-28 2:34 ` Shawn Guo
2024-06-26 20:25 ` [PATCH v2 08/13] arm64: dts: layerscape: rename node name "wdt" to "watchdog" Frank Li
2024-06-26 20:25 ` [PATCH v2 09/13] arm64: dts: layerscape: change pcie interrupt order Frank Li
2024-06-26 20:25 ` [PATCH v2 10/13] arm64: dts: layerscape: rename aux_bus to aux-bus Frank Li
2024-06-26 20:25 ` [PATCH v2 11/13] arm64: dts: fsl-ls1043a: remove unused clk-name at watchdog node Frank Li
2024-06-26 20:25 ` [PATCH v2 12/13] arm64: dts: fsl-ls1046a: rename thermal node name Frank Li
2024-06-26 20:25 ` [PATCH v2 13/13] arm64: dts: layerscape: rename b(q)man-portals to b(q)man-portals-bus Frank Li
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240626202533.2182846-7-Frank.Li@nxp.com \
--to=frank.li@nxp.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=imx@lists.linux.dev \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=robh@kernel.org \
--cc=shawnguo@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox