From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
To: Isaac Scott <isaac.scott@ideasonboard.com>
Cc: mchehab@kernel.org, rmfrfs@gmail.com, martink@posteo.de,
kernel@puri.sm, shawnguo@kernel.org, s.hauer@pengutronix.de,
kernel@pengutronix.de, festevam@gmail.com,
sakari.ailus@linux.intel.com, linux-media@vger.kernel.org,
linux-kernel@vger.kernel.org, imx@lists.linux.dev,
linux-arm-kernel@lists.infradead.org, Frank.Li@nxp.com
Subject: Re: [PATCH v5 3/4] media: imx-mipi-csis: Add num_data_lanes to mipi_csis_device
Date: Sun, 26 Oct 2025 23:07:24 +0200 [thread overview]
Message-ID: <20251026210724.GE1025@pendragon.ideasonboard.com> (raw)
In-Reply-To: <20251022102228.275627-4-isaac.scott@ideasonboard.com>
Hi Isaac,
Thank you for the patch.
On Wed, Oct 22, 2025 at 11:22:27AM +0100, Isaac Scott wrote:
> Add the num_data_lanes field to the mipi_csis_device struct, and set it
> equal to csis->bus.num_data_lanes. This is in preparation to support
> cases when the data lanes actively used differs from the maximum
> supported data lanes.
>
> No functional changes intended by this commit.
>
> Signed-off-by: Isaac Scott <isaac.scott@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> ---
> drivers/media/platform/nxp/imx-mipi-csis.c | 11 +++++++----
> 1 file changed, 7 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/media/platform/nxp/imx-mipi-csis.c b/drivers/media/platform/nxp/imx-mipi-csis.c
> index 7c2a679dca2e..838a1ad123b5 100644
> --- a/drivers/media/platform/nxp/imx-mipi-csis.c
> +++ b/drivers/media/platform/nxp/imx-mipi-csis.c
> @@ -351,6 +351,8 @@ struct mipi_csis_device {
> u32 hs_settle;
> u32 clk_settle;
>
> + unsigned int num_data_lanes;
> +
> spinlock_t slock; /* Protect events */
> struct mipi_csis_event events[MIPI_CSIS_NUM_EVENTS];
> struct dentry *debugfs_root;
> @@ -573,7 +575,7 @@ static void mipi_csis_system_enable(struct mipi_csis_device *csis, int on)
> val = mipi_csis_read(csis, MIPI_CSIS_DPHY_CMN_CTRL);
> val &= ~MIPI_CSIS_DPHY_CMN_CTRL_ENABLE;
> if (on) {
> - mask = (1 << (csis->bus.num_data_lanes + 1)) - 1;
> + mask = (1 << (csis->num_data_lanes + 1)) - 1;
> val |= (mask & MIPI_CSIS_DPHY_CMN_CTRL_ENABLE);
> }
> mipi_csis_write(csis, MIPI_CSIS_DPHY_CMN_CTRL, val);
> @@ -623,7 +625,7 @@ static int mipi_csis_calculate_params(struct mipi_csis_device *csis,
>
> /* Calculate the line rate from the pixel rate. */
> link_freq = v4l2_get_link_freq(csis->source.pad, csis_fmt->width,
> - csis->bus.num_data_lanes * 2);
> + csis->num_data_lanes * 2);
> if (link_freq < 0) {
> dev_err(csis->dev, "Unable to obtain link frequency: %d\n",
> (int)link_freq);
> @@ -668,7 +670,7 @@ static void mipi_csis_set_params(struct mipi_csis_device *csis,
> const struct v4l2_mbus_framefmt *format,
> const struct csis_pix_format *csis_fmt)
> {
> - int lanes = csis->bus.num_data_lanes;
> + int lanes = csis->num_data_lanes;
> u32 val;
>
> val = mipi_csis_read(csis, MIPI_CSIS_CMN_CTRL);
> @@ -1366,8 +1368,9 @@ static int mipi_csis_async_register(struct mipi_csis_device *csis)
> }
>
> csis->bus = vep.bus.mipi_csi2;
> + csis->num_data_lanes = csis->bus.num_data_lanes;
>
> - dev_dbg(csis->dev, "data lanes: %d\n", csis->bus.num_data_lanes);
> + dev_dbg(csis->dev, "max data lanes: %d\n", csis->bus.num_data_lanes);
> dev_dbg(csis->dev, "flags: 0x%08x\n", csis->bus.flags);
>
> asd = v4l2_async_nf_add_fwnode_remote(&csis->notifier, ep,
--
Regards,
Laurent Pinchart
next prev parent reply other threads:[~2025-10-26 21:07 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-10-22 10:22 [PATCH v5 0/4] media: imx-mipi-csis: Get the number of active lanes from mbus_config Isaac Scott
2025-10-22 10:22 ` [PATCH v5 1/4] media: v4l: Add helper to get number of active lanes via a pad Isaac Scott
2025-10-22 10:22 ` [PATCH v5 2/4] media: imx-mipi-csis: Move redundant debug print in probe Isaac Scott
2025-10-26 21:05 ` Laurent Pinchart
2025-10-22 10:22 ` [PATCH v5 3/4] media: imx-mipi-csis: Add num_data_lanes to mipi_csis_device Isaac Scott
2025-10-22 14:59 ` Frank Li
2025-10-26 21:07 ` Laurent Pinchart [this message]
2025-10-22 10:22 ` [PATCH v5 4/4] media: imx-mipi-csis: Support active data lanes differing from maximum Isaac Scott
2025-10-22 11:13 ` Sakari Ailus
2025-10-26 21:11 ` Laurent Pinchart
2025-10-22 15:00 ` Frank Li
2025-10-22 16:21 ` Bryan O'Donoghue
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20251026210724.GE1025@pendragon.ideasonboard.com \
--to=laurent.pinchart@ideasonboard.com \
--cc=Frank.Li@nxp.com \
--cc=festevam@gmail.com \
--cc=imx@lists.linux.dev \
--cc=isaac.scott@ideasonboard.com \
--cc=kernel@pengutronix.de \
--cc=kernel@puri.sm \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=martink@posteo.de \
--cc=mchehab@kernel.org \
--cc=rmfrfs@gmail.com \
--cc=s.hauer@pengutronix.de \
--cc=sakari.ailus@linux.intel.com \
--cc=shawnguo@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox