Re: [PATCH v2 11/18] arm64: dts: ti: k3-am68-sk: Add overlay for dual Arducam V3link fusion

[sashiko-bot@kernel.org]

Thank you for your contribution! Sashiko AI review found 1 potential issue(s) to consider:
- [Low] Missing space around '=' in property assignment.
--

--- Patch [11]: [PATCH v2 11/18] arm64: dts: ti: k3-am68-sk: Add overlay for dual Arducam V3link fusion ---
commit f16de548646cfb8ded4d412b513b2b6f314dbb9d
Author: Vaishnav Achath <vaishnav.a@ti.com>

arm64: dts: ti: k3-am68-sk: Add overlay for dual Arducam V3link fusion

This commit adds a device tree overlay supporting two Arducam V3Link mini
fusion boards, each connected to one of the two CSI RX inputs on the AM68-SK.
The overlay configures the DS90UB960 deserializers to aggregate inputs from
up to four cameras over a single CSI-2 connector.

Link: https://www.arducam.com/downloads/datasheet/Arducam_V3Link_Datasheet.pdf

> diff --git a/arch/arm64/boot/dts/ti/k3-am68-sk-v3link-fusion.dtso b/arch/arm64/boot/dts/ti/k3-am68-sk-v3link-fusion.dtso
> new file mode 100644
> index 0000000000000..b293deede6380
> --- /dev/null
> +++ b/arch/arm64/boot/dts/ti/k3-am68-sk-v3link-fusion.dtso
[ ... ]
> +&cam1_i2c {
> +	#address-cells = <1>;
> +	#size-cells = <0>;
> +
> +	deser@30 {
> +		compatible = "ti,ds90ub960-q1";
> +		reg = <0x30>;
[ ... ]
> +		deserializer_1_ports: ports {
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +
> +			port@0 {
> +				reg = <0>;
> +				status = "disabled";
> +			};
> +
> +			port@1 {
> +				reg= <1>;

[Severity: Low]
This isn't a bug, but there is a missing space before the equals sign here.
The v2 changelog mentions fixing minor DTS styling and whitespace
inconsistencies in port definitions, so was this one missed?

> +				status = "disabled";
> +			};
> +
> +			port@2 {
> +				reg = <2>;
> +				status = "disabled";
> +			};

-- 
Sashiko AI review · https://sashiko.dev/#/patchset/20260713113423.2310443-1-y-abhilashchandra@ti.com?part=11