From: Liu Ying <victor.liu@nxp.com>
To: Alexander Stein <alexander.stein@ew.tq-group.com>
Cc: Frank Li <Frank.Li@nxp.com>,
Sascha Hauer <s.hauer@pengutronix.de>,
Pengutronix Kernel Team <kernel@pengutronix.de>,
Fabio Estevam <festevam@gmail.com>, Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Dong Aisheng <aisheng.dong@nxp.com>,
imx@lists.linux.dev, linux-arm-kernel@lists.infradead.org,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
linux@ew.tq-group.com
Subject: Re: [PATCH v2 2/5] arm64: dts: imx8qxp: Add display controller subsystem
Date: Thu, 15 Oct 2026 11:41:54 +0800 [thread overview]
Message-ID: <atBLglf0gSLS7XkW@raspi> (raw)
In-Reply-To: <20261014071657.118378-3-alexander.stein@ew.tq-group.com>
Hi Alexander,
On Wed, Oct 14, 2026 at 09:16:46AM +0200, Alexander Stein wrote:
[...]
> + dc0: display-controller@56180000 {
> + reg = <0x56180000 0x40000>;
> + clocks = <&dc0_lpcg IMX_LPCG_CLK_4>;
> + power-domains = <&pd IMX_SC_R_DC_0>;
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges;
> + status = "disabled";
> +
> + dc0_intc: interrupt-controller@56180040 {
> + reg = <0x56180040 0x60>;
> + clocks = <&dc0_lpcg IMX_LPCG_CLK_5>;
> + interrupt-controller;
> + interrupt-parent = <&dc0_irqsteer>;
> + #interrupt-cells = <1>;
> + interrupts = <448>, <449>, <450>, <64>,
> + <65>, <66>, <67>, <68>,
> + <69>, <70>, <193>, <194>,
> + <195>, <196>, <197>, <72>,
> + <73>, <74>, <75>, <76>,
> + <77>, <78>, <79>, <80>,
> + <81>, <199>, <200>, <201>,
> + <202>, <203>, <204>, <205>,
> + <206>, <207>, <208>, <5>,
> + <0>, <1>, <2>, <3>,
> + <4>, <82>, <83>, <84>,
> + <85>, <209>, <210>, <211>,
> + <212>;
> + interrupt-names = "store9_shdload",
> + "store9_framecomplete",
> + "store9_seqcomplete",
> + "extdst0_shdload",
> + "extdst0_framecomplete",
> + "extdst0_seqcomplete",
> + "extdst4_shdload",
> + "extdst4_framecomplete",
> + "extdst4_seqcomplete",
> + "extdst1_shdload",
> + "extdst1_framecomplete",
> + "extdst1_seqcomplete",
> + "extdst5_shdload",
> + "extdst5_framecomplete",
> + "extdst5_seqcomplete",
> + "disengcfg_shdload0",
> + "disengcfg_framecomplete0",
> + "disengcfg_seqcomplete0",
> + "framegen0_int0",
> + "framegen0_int1",
> + "framegen0_int2",
> + "framegen0_int3",
> + "sig0_shdload",
> + "sig0_valid",
> + "sig0_error",
> + "disengcfg_shdload1",
> + "disengcfg_framecomplete1",
> + "disengcfg_seqcomplete1",
> + "framegen1_int0",
> + "framegen1_int1",
> + "framegen1_int2",
> + "framegen1_int3",
> + "sig1_shdload",
> + "sig1_valid",
> + "sig1_error",
> + "reserved",
> + "cmdseq_error",
> + "comctrl_sw0",
> + "comctrl_sw1",
> + "comctrl_sw2",
> + "comctrl_sw3",
> + "framegen0_primsync_on",
> + "framegen0_primsync_off",
> + "framegen0_secsync_on",
> + "framegen0_secsync_off",
> + "framegen1_primsync_on",
> + "framegen1_primsync_off",
> + "framegen1_secsync_on",
> + "framegen1_secsync_off";
> + };
> +
> + dc0_pixel_engine: pixel-engine@56180800 {
> + reg = <0x56180800 0xac00>;
> + clocks = <&dc0_lpcg IMX_LPCG_CLK_5>;
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges;
> +
> + dc0_constframe0: constframe@56180960 {
> + reg = <0x56180960 0xc>, <0x56184400 0x20>;
> + reg-names = "pec", "cfg";
> + };
> +
> + dc0_extdst0: extdst@56180980 {
> + reg = <0x56180980 0x1c>, <0x56184800 0x28>;
> + reg-names = "pec", "cfg";
> + interrupt-parent = <&dc0_intc>;
> + interrupts = <3>, <4>, <5>;
> + interrupt-names = "shdload", "framecomplete", "seqcomplete";
> + };
> +
> + dc0_constframe4: constframe@561809a0 {
> + reg = <0x561809a0 0xc>, <0x56184c00 0x20>;
> + reg-names = "pec", "cfg";
> + };
> +
> + dc0_extdst4: extdst@561809c0 {
> + reg = <0x561809c0 0x1c>, <0x56185000 0x28>;
> + reg-names = "pec", "cfg";
> + interrupt-parent = <&dc0_intc>;
> + interrupts = <6>, <7>, <8>;
> + interrupt-names = "shdload", "framecomplete", "seqcomplete";
> + };
> +
> + dc0_constframe1: constframe@561809e0 {
> + reg = <0x561809e0 0xc>, <0x56185400 0x20>;
> + reg-names = "pec", "cfg";
> + };
> +
> + dc0_extdst1: extdst@56180a00 {
> + reg = <0x56180a00 0x1c>, <0x56185800 0x28>;
> + reg-names = "pec", "cfg";
> + interrupt-parent = <&dc0_intc>;
> + interrupts = <9>, <10>, <11>;
> + interrupt-names = "shdload", "framecomplete", "seqcomplete";
> + };
> +
> + dc0_constframe5: constframe@56180a20 {
> + reg = <0x56180a20 0xc>, <0x56185c00 0x20>;
> + reg-names = "pec", "cfg";
> + };
> +
> + dc0_extdst5: extdst@56180a40 {
> + reg = <0x56180a40 0x1c>, <0x56186000 0x28>;
> + reg-names = "pec", "cfg";
> + interrupt-parent = <&dc0_intc>;
> + interrupts = <12>, <13>, <14>;
> + interrupt-names = "shdload", "framecomplete", "seqcomplete";
> + };
> +
> + dc0_fetchwarp2: fetchwarp@56180a60 {
> + reg = <0x56180a60 0x10>, <0x56186400 0x190>;
> + reg-names = "pec", "cfg";
> + };
> +
> + dc0_fetchlayer0: fetchlayer@56180ac0 {
> + reg = <0x56180ac0 0xc>, <0x56188400 0x404>;
> + reg-names = "pec", "cfg";
> + };
> +
> + dc0_layerblend0: layerblend@56180ba0 {
> + reg = <0x56180ba0 0x10>, <0x5618a400 0x20>;
> + reg-names = "pec", "cfg";
> + };
> +
> + dc0_layerblend1: layerblend@56180bc0 {
> + reg = <0x56180bc0 0x10>, <0x5618a800 0x20>;
> + reg-names = "pec", "cfg";
> + };
> +
> + dc0_layerblend2: layerblend@56180be0 {
> + reg = <0x56180be0 0x10>, <0x5618ac00 0x20>;
> + reg-names = "pec", "cfg";
> + };
> +
> + dc0_layerblend3: layerblend@56180c00 {
> + reg = <0x56180c00 0x10>, <0x5618b000 0x20>;
> + reg-names = "pec", "cfg";
> + };
> + };
> +
> + dc0_display_engine0: display-engine@5618b400 {
> + reg = <0x5618b400 0x14>, <0x5618b800 0x1c00>;
> + reg-names = "top", "cfg";
> + interrupt-parent = <&dc0_intc>;
> + interrupts = <15>, <16>, <17>;
> + interrupt-names = "shdload", "framecomplete", "seqcomplete";
> + power-domains = <&pd IMX_SC_R_DC_0_PLL_0>;
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges;
> +
> + dc0_framegen0: framegen@5618b800 {
> + reg = <0x5618b800 0x98>;
> + clocks = <&dc0_disp_lpcg IMX_LPCG_CLK_0>;
> + interrupt-parent = <&dc0_intc>;
> + interrupts = <18>, <19>, <20>, <21>,
> + <41>, <42>, <43>, <44>;
> + interrupt-names = "int0", "int1", "int2", "int3",
> + "primsync_on", "primsync_off",
> + "secsync_on", "secsync_off";
> + };
> +
> + dc0_tcon0: tcon@5618c800 {
> + reg = <0x5618c800 0x588>;
> +
> + port {
> + dc0_disp0_dc0_pixel_combiner_ch0: endpoint {
> + remote-endpoint = <&dc0_pixel_combiner_ch0_dc0_disp0>;
> + };
> + };
> + };
> + };
> +
> + dc0_display_engine1: display-engine@5618b420 {
> + reg = <0x5618b420 0x14>, <0x5618d400 0x1c00>;
> + reg-names = "top", "cfg";
> + interrupt-parent = <&dc0_intc>;
> + interrupts = <25>, <26>, <27>;
> + interrupt-names = "shdload", "framecomplete", "seqcomplete";
> + power-domains = <&pd IMX_SC_R_DC_0_PLL_1>;
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges;
> +
> + dc0_framegen1: framegen@5618d400 {
> + reg = <0x5618d400 0x98>;
> + clocks = <&dc0_disp_lpcg IMX_LPCG_CLK_1>;
> + interrupt-parent = <&dc0_intc>;
> + interrupts = <28>, <29>, <30>, <31>,
> + <45>, <46>, <47>, <48>;
> + interrupt-names = "int0", "int1", "int2", "int3",
> + "primsync_on", "primsync_off",
> + "secsync_on", "secsync_off";
> + };
> +
> + dc0_tcon1: tcon@5618e400 {
> + reg = <0x5618e400 0x588>;
> +
> + port {
> + dc0_disp1_dc0_pixel_combiner_ch1: endpoint {
> + remote-endpoint = <&dc0_pixel_combiner_ch1_dc0_disp1>;
> + };
> + };
> + };
> + };
> + };
I'm thinking that it would be good to have a complete display controller
DT node in the first place, including those prefetch engines attached to
fetchunits through the fsl,prg property. In this way, display controller
driver's life would be easier - all child/grandchild devices are always
available. I'm considering to adding a check to the Linux display controller
driver to ensure the availability(at least for critical child/grandchild
devices).
--
Regards,
Liu Ying
next prev parent reply other threads:[~2026-10-15 3:40 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-10-14 7:16 [PATCH v2 0/5] LVDS support for TQMa8Xx Alexander Stein
2026-10-14 7:16 ` [PATCH v2 1/5] dt-bindings: firmware: imx: Add SCU controlled display pixel link nodes Alexander Stein
2026-10-14 7:24 ` sashiko-bot
2026-10-14 9:39 ` Alexander Stein
2026-10-14 7:16 ` [PATCH v2 2/5] arm64: dts: imx8qxp: Add display controller subsystem Alexander Stein
2026-10-14 13:55 ` Frank Li
2026-10-15 6:31 ` Francesco Dolcini
2026-10-15 8:25 ` Alexander Stein
2026-10-15 3:41 ` Liu Ying [this message]
2026-10-15 16:22 ` Frank Li
2026-10-14 7:16 ` [PATCH v2 3/5] arm64: dts: imx8qxp: Add MIPI-LVDS combo subsystems Alexander Stein
2026-10-14 7:29 ` sashiko-bot
2026-10-14 9:25 ` Alexander Stein
2026-10-14 14:01 ` Frank Li
2026-10-15 8:09 ` Alexander Stein
2026-10-14 7:16 ` [PATCH v2 4/5] arm64: dts: freescale: Add LVDS overlays for TQMa8Xx Alexander Stein
2026-10-14 7:16 ` [PATCH v2 5/5] arm64: dts: freescale: Add dual-channel LVDS overlay " Alexander Stein
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=atBLglf0gSLS7XkW@raspi \
--to=victor.liu@nxp.com \
--cc=Frank.Li@nxp.com \
--cc=aisheng.dong@nxp.com \
--cc=alexander.stein@ew.tq-group.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=festevam@gmail.com \
--cc=imx@lists.linux.dev \
--cc=kernel@pengutronix.de \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@ew.tq-group.com \
--cc=robh@kernel.org \
--cc=s.hauer@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox