From: Jason Gunthorpe <jgg@nvidia.com>
To: David Airlie <airlied@linux.ie>, Daniel Vetter <daniel@ffwll.ch>,
<dri-devel@lists.freedesktop.org>,
<intel-gfx@lists.freedesktop.org>,
"Jani Nikula" <jani.nikula@linux.intel.com>,
Joonas Lahtinen <joonas.lahtinen@linux.intel.com>,
VMware Graphics <linux-graphics-maintainer@vmware.com>,
Maarten Lankhorst <maarten.lankhorst@linux.intel.com>,
Maxime Ripard <mripard@kernel.org>,
Rodrigo Vivi <rodrigo.vivi@intel.com>,
Christoph Hellwig <hch@lst.de>,
Roland Scheidegger <sroland@vmware.com>,
Thomas Zimmermann <tzimmermann@suse.de>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>,
Thomas Hellstrom <thellstrom@vmware.com>, Qian Cai <cai@lca.pw>,
Gerd Hoffmann <kraxel@redhat.com>
Subject: [Intel-gfx] [PATCH] drm: Remove SCATTERLIST_MAX_SEGMENT
Date: Wed, 28 Oct 2020 16:15:26 -0300 [thread overview]
Message-ID: <0-v1-44733fccd781+13d-rm_scatterlist_max_jgg@nvidia.com> (raw)
Since commit 9a40401cfa13 ("lib/scatterlist: Do not limit max_segment to
PAGE_ALIGNED values") the max_segment input to sg_alloc_table_from_pages()
does not have to be any special value. The new algorithm will always
create something less than what the user provides. Thus eliminate this
confusing constant.
- vmwgfx should use the HW capability, not mix in the OS page size for
calling dma_set_max_seg_size()
- i915 uses i915_sg_segment_size() both for sg_alloc_table_from_pages
and for some open coded sgl construction. This doesn't change the value
since rounddown(size, UINT_MAX) == SCATTERLIST_MAX_SEGMENT
- drm_prime_pages_to_sg uses it as a default if max_segment is zero,
UINT_MAX is fine to use directly.
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Thomas Hellstrom <thellstrom@vmware.com>
Cc: Qian Cai <cai@lca.pw>
Cc: "Ursulin, Tvrtko" <tvrtko.ursulin@intel.com>
Suggested-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
---
drivers/gpu/drm/drm_prime.c | 4 ++--
drivers/gpu/drm/i915/i915_scatterlist.h | 2 +-
drivers/gpu/drm/vmwgfx/vmwgfx_drv.c | 3 +--
include/linux/scatterlist.h | 6 ------
tools/testing/scatterlist/main.c | 2 +-
5 files changed, 5 insertions(+), 12 deletions(-)
diff --git a/drivers/gpu/drm/drm_prime.c b/drivers/gpu/drm/drm_prime.c
index d6808f678db541..c3693e5e8b74b0 100644
--- a/drivers/gpu/drm/drm_prime.c
+++ b/drivers/gpu/drm/drm_prime.c
@@ -816,8 +816,8 @@ struct sg_table *drm_prime_pages_to_sg(struct drm_device *dev,
if (dev)
max_segment = dma_max_mapping_size(dev->dev);
- if (max_segment == 0 || max_segment > SCATTERLIST_MAX_SEGMENT)
- max_segment = SCATTERLIST_MAX_SEGMENT;
+ if (max_segment == 0)
+ max_segment = UINT_MAX;
sge = __sg_alloc_table_from_pages(sg, pages, nr_pages, 0,
nr_pages << PAGE_SHIFT,
max_segment,
diff --git a/drivers/gpu/drm/i915/i915_scatterlist.h b/drivers/gpu/drm/i915/i915_scatterlist.h
index b7b59328cb76ab..883dd8d09d6bf2 100644
--- a/drivers/gpu/drm/i915/i915_scatterlist.h
+++ b/drivers/gpu/drm/i915/i915_scatterlist.h
@@ -112,7 +112,7 @@ static inline unsigned int i915_sg_segment_size(void)
unsigned int size = swiotlb_max_segment();
if (size == 0)
- return SCATTERLIST_MAX_SEGMENT;
+ size = UINT_MAX;
size = rounddown(size, PAGE_SIZE);
/* swiotlb_max_segment_size can return 1 byte when it means one page. */
diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_drv.c b/drivers/gpu/drm/vmwgfx/vmwgfx_drv.c
index 31e3e5c9f36223..c1817f1a3006e0 100644
--- a/drivers/gpu/drm/vmwgfx/vmwgfx_drv.c
+++ b/drivers/gpu/drm/vmwgfx/vmwgfx_drv.c
@@ -792,8 +792,7 @@ static int vmw_driver_load(struct drm_device *dev, unsigned long chipset)
if (unlikely(ret != 0))
goto out_err0;
- dma_set_max_seg_size(dev->dev, min_t(unsigned int, U32_MAX & PAGE_MASK,
- SCATTERLIST_MAX_SEGMENT));
+ dma_set_max_seg_size(dev->dev, U32_MAX);
if (dev_priv->capabilities & SVGA_CAP_GMR2) {
DRM_INFO("Max GMR ids is %u\n",
diff --git a/include/linux/scatterlist.h b/include/linux/scatterlist.h
index 36c47e7e66a203..6f70572b2938be 100644
--- a/include/linux/scatterlist.h
+++ b/include/linux/scatterlist.h
@@ -18,12 +18,6 @@ struct scatterlist {
#endif
};
-/*
- * Since the above length field is an unsigned int, below we define the maximum
- * length in bytes that can be stored in one scatterlist entry.
- */
-#define SCATTERLIST_MAX_SEGMENT (UINT_MAX & PAGE_MASK)
-
/*
* These macros should be used after a dma_map_sg call has been done
* to get bus addresses of each of the SG entries and their lengths.
diff --git a/tools/testing/scatterlist/main.c b/tools/testing/scatterlist/main.c
index b2c7e9f7b8d3dc..d264bf853034bd 100644
--- a/tools/testing/scatterlist/main.c
+++ b/tools/testing/scatterlist/main.c
@@ -50,7 +50,7 @@ static void fail(struct test *test, struct sg_table *st, const char *cond)
int main(void)
{
- const unsigned int sgmax = SCATTERLIST_MAX_SEGMENT;
+ const unsigned int sgmax = UINT_MAX;
struct test *test, tests[] = {
{ -EINVAL, 1, pfn(0), PAGE_SIZE, PAGE_SIZE + 1, 1 },
{ -EINVAL, 1, pfn(0), PAGE_SIZE, 0, 1 },
--
2.28.0
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
next reply other threads:[~2020-10-29 13:41 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-10-28 19:15 Jason Gunthorpe [this message]
2020-10-28 19:49 ` [Intel-gfx] [PATCH] drm: Remove SCATTERLIST_MAX_SEGMENT Daniel Vetter
2020-10-29 18:20 ` Jason Gunthorpe
2020-10-29 18:29 ` Daniel Vetter
2020-10-29 17:02 ` [Intel-gfx] ✗ Fi.CI.CHECKPATCH: warning for " Patchwork
2020-10-29 17:31 ` [Intel-gfx] ✓ Fi.CI.BAT: success " Patchwork
2020-10-29 21:31 ` [Intel-gfx] ✗ Fi.CI.IGT: failure " Patchwork
2020-11-02 14:49 ` [Intel-gfx] [PATCH] " Daniel Vetter
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=0-v1-44733fccd781+13d-rm_scatterlist_max_jgg@nvidia.com \
--to=jgg@nvidia.com \
--cc=airlied@linux.ie \
--cc=cai@lca.pw \
--cc=daniel.vetter@ffwll.ch \
--cc=daniel@ffwll.ch \
--cc=dri-devel@lists.freedesktop.org \
--cc=hch@lst.de \
--cc=intel-gfx@lists.freedesktop.org \
--cc=jani.nikula@linux.intel.com \
--cc=joonas.lahtinen@linux.intel.com \
--cc=kraxel@redhat.com \
--cc=linux-graphics-maintainer@vmware.com \
--cc=maarten.lankhorst@linux.intel.com \
--cc=mripard@kernel.org \
--cc=rodrigo.vivi@intel.com \
--cc=sroland@vmware.com \
--cc=thellstrom@vmware.com \
--cc=tzimmermann@suse.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox