From: Daniel Vetter <daniel@ffwll.ch>
To: Jason Gunthorpe <jgg@nvidia.com>
Cc: Maxime Ripard <mripard@kernel.org>,
Thomas Hellstrom <thellstrom@vmware.com>,
Thomas Zimmermann <tzimmermann@suse.de>,
David Airlie <airlied@linux.ie>,
Roland Scheidegger <sroland@vmware.com>,
intel-gfx@lists.freedesktop.org,
Daniel Vetter <daniel.vetter@ffwll.ch>,
VMware Graphics <linux-graphics-maintainer@vmware.com>,
dri-devel@lists.freedesktop.org, Qian Cai <cai@lca.pw>,
Christoph Hellwig <hch@lst.de>, Gerd Hoffmann <kraxel@redhat.com>
Subject: Re: [Intel-gfx] [PATCH] drm: Remove SCATTERLIST_MAX_SEGMENT
Date: Mon, 2 Nov 2020 15:49:20 +0100 [thread overview]
Message-ID: <20201102144920.GS401619@phenom.ffwll.local> (raw)
In-Reply-To: <0-v1-44733fccd781+13d-rm_scatterlist_max_jgg@nvidia.com>
On Wed, Oct 28, 2020 at 04:15:26PM -0300, Jason Gunthorpe wrote:
> Since commit 9a40401cfa13 ("lib/scatterlist: Do not limit max_segment to
> PAGE_ALIGNED values") the max_segment input to sg_alloc_table_from_pages()
> does not have to be any special value. The new algorithm will always
> create something less than what the user provides. Thus eliminate this
> confusing constant.
>
> - vmwgfx should use the HW capability, not mix in the OS page size for
> calling dma_set_max_seg_size()
>
> - i915 uses i915_sg_segment_size() both for sg_alloc_table_from_pages
> and for some open coded sgl construction. This doesn't change the value
> since rounddown(size, UINT_MAX) == SCATTERLIST_MAX_SEGMENT
>
> - drm_prime_pages_to_sg uses it as a default if max_segment is zero,
> UINT_MAX is fine to use directly.
>
> Cc: Gerd Hoffmann <kraxel@redhat.com>
> Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
> Cc: Thomas Hellstrom <thellstrom@vmware.com>
> Cc: Qian Cai <cai@lca.pw>
> Cc: "Ursulin, Tvrtko" <tvrtko.ursulin@intel.com>
> Suggested-by: Christoph Hellwig <hch@lst.de>
> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Merged to drm-misc-next, thanks for your patch.
-Daniel
> ---
> drivers/gpu/drm/drm_prime.c | 4 ++--
> drivers/gpu/drm/i915/i915_scatterlist.h | 2 +-
> drivers/gpu/drm/vmwgfx/vmwgfx_drv.c | 3 +--
> include/linux/scatterlist.h | 6 ------
> tools/testing/scatterlist/main.c | 2 +-
> 5 files changed, 5 insertions(+), 12 deletions(-)
>
> diff --git a/drivers/gpu/drm/drm_prime.c b/drivers/gpu/drm/drm_prime.c
> index d6808f678db541..c3693e5e8b74b0 100644
> --- a/drivers/gpu/drm/drm_prime.c
> +++ b/drivers/gpu/drm/drm_prime.c
> @@ -816,8 +816,8 @@ struct sg_table *drm_prime_pages_to_sg(struct drm_device *dev,
>
> if (dev)
> max_segment = dma_max_mapping_size(dev->dev);
> - if (max_segment == 0 || max_segment > SCATTERLIST_MAX_SEGMENT)
> - max_segment = SCATTERLIST_MAX_SEGMENT;
> + if (max_segment == 0)
> + max_segment = UINT_MAX;
> sge = __sg_alloc_table_from_pages(sg, pages, nr_pages, 0,
> nr_pages << PAGE_SHIFT,
> max_segment,
> diff --git a/drivers/gpu/drm/i915/i915_scatterlist.h b/drivers/gpu/drm/i915/i915_scatterlist.h
> index b7b59328cb76ab..883dd8d09d6bf2 100644
> --- a/drivers/gpu/drm/i915/i915_scatterlist.h
> +++ b/drivers/gpu/drm/i915/i915_scatterlist.h
> @@ -112,7 +112,7 @@ static inline unsigned int i915_sg_segment_size(void)
> unsigned int size = swiotlb_max_segment();
>
> if (size == 0)
> - return SCATTERLIST_MAX_SEGMENT;
> + size = UINT_MAX;
>
> size = rounddown(size, PAGE_SIZE);
> /* swiotlb_max_segment_size can return 1 byte when it means one page. */
> diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_drv.c b/drivers/gpu/drm/vmwgfx/vmwgfx_drv.c
> index 31e3e5c9f36223..c1817f1a3006e0 100644
> --- a/drivers/gpu/drm/vmwgfx/vmwgfx_drv.c
> +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_drv.c
> @@ -792,8 +792,7 @@ static int vmw_driver_load(struct drm_device *dev, unsigned long chipset)
> if (unlikely(ret != 0))
> goto out_err0;
>
> - dma_set_max_seg_size(dev->dev, min_t(unsigned int, U32_MAX & PAGE_MASK,
> - SCATTERLIST_MAX_SEGMENT));
> + dma_set_max_seg_size(dev->dev, U32_MAX);
>
> if (dev_priv->capabilities & SVGA_CAP_GMR2) {
> DRM_INFO("Max GMR ids is %u\n",
> diff --git a/include/linux/scatterlist.h b/include/linux/scatterlist.h
> index 36c47e7e66a203..6f70572b2938be 100644
> --- a/include/linux/scatterlist.h
> +++ b/include/linux/scatterlist.h
> @@ -18,12 +18,6 @@ struct scatterlist {
> #endif
> };
>
> -/*
> - * Since the above length field is an unsigned int, below we define the maximum
> - * length in bytes that can be stored in one scatterlist entry.
> - */
> -#define SCATTERLIST_MAX_SEGMENT (UINT_MAX & PAGE_MASK)
> -
> /*
> * These macros should be used after a dma_map_sg call has been done
> * to get bus addresses of each of the SG entries and their lengths.
> diff --git a/tools/testing/scatterlist/main.c b/tools/testing/scatterlist/main.c
> index b2c7e9f7b8d3dc..d264bf853034bd 100644
> --- a/tools/testing/scatterlist/main.c
> +++ b/tools/testing/scatterlist/main.c
> @@ -50,7 +50,7 @@ static void fail(struct test *test, struct sg_table *st, const char *cond)
>
> int main(void)
> {
> - const unsigned int sgmax = SCATTERLIST_MAX_SEGMENT;
> + const unsigned int sgmax = UINT_MAX;
> struct test *test, tests[] = {
> { -EINVAL, 1, pfn(0), PAGE_SIZE, PAGE_SIZE + 1, 1 },
> { -EINVAL, 1, pfn(0), PAGE_SIZE, 0, 1 },
> --
> 2.28.0
>
--
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
prev parent reply other threads:[~2020-11-02 14:49 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-10-28 19:15 [Intel-gfx] [PATCH] drm: Remove SCATTERLIST_MAX_SEGMENT Jason Gunthorpe
2020-10-28 19:49 ` Daniel Vetter
2020-10-29 18:20 ` Jason Gunthorpe
2020-10-29 18:29 ` Daniel Vetter
2020-10-29 17:02 ` [Intel-gfx] ✗ Fi.CI.CHECKPATCH: warning for " Patchwork
2020-10-29 17:31 ` [Intel-gfx] ✓ Fi.CI.BAT: success " Patchwork
2020-10-29 21:31 ` [Intel-gfx] ✗ Fi.CI.IGT: failure " Patchwork
2020-11-02 14:49 ` Daniel Vetter [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20201102144920.GS401619@phenom.ffwll.local \
--to=daniel@ffwll.ch \
--cc=airlied@linux.ie \
--cc=cai@lca.pw \
--cc=daniel.vetter@ffwll.ch \
--cc=dri-devel@lists.freedesktop.org \
--cc=hch@lst.de \
--cc=intel-gfx@lists.freedesktop.org \
--cc=jgg@nvidia.com \
--cc=kraxel@redhat.com \
--cc=linux-graphics-maintainer@vmware.com \
--cc=mripard@kernel.org \
--cc=sroland@vmware.com \
--cc=thellstrom@vmware.com \
--cc=tzimmermann@suse.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox