From: Sagar Arun Kamble <sagar.a.kamble@intel.com>
To: Lionel Landwerlin <lionel.g.landwerlin@intel.com>,
Robert Bragg <robert@sixbynine.org>
Cc: Intel Graphics Development <intel-gfx@lists.freedesktop.org>
Subject: Re: [RFC 0/4] GPU/CPU timestamps correlation for relating OA samples with system events
Date: Tue, 26 Dec 2017 11:02:08 +0530 [thread overview]
Message-ID: <04eca028-3705-5a28-b500-089ca19e712c@intel.com> (raw)
In-Reply-To: <30446e83-3d0f-ae39-5c0d-a23bc4c89557@intel.com>
[-- Attachment #1.1: Type: text/plain, Size: 3852 bytes --]
On 12/22/2017 3:46 PM, Lionel Landwerlin wrote:
> On 22/12/17 09:30, Sagar Arun Kamble wrote:
>>
>>
>>
>> On 12/21/2017 6:29 PM, Lionel Landwerlin wrote:
>>> Some more findings I made while playing with this series & GPUTop.
>>> Turns out the 2ms drift per second is due to timecounter. Adding the
>>> delta this way :
>>>
>>> https://github.com/djdeath/linux/commit/7b002cb360483e331053aec0f98433a5bd5c5c3f#diff-9b74bd0cfaa90b601d80713c7bd56be4R607
>>>
>>> Eliminates the drift.
>> I see two imp. changes 1. approximation of start time during
>> init_timecounter 2. overflow handling in delta accumulation.
>> With these incorporated, I guess timecounter should also work in same
>> fashion.
>
> I think the arithmetic in timecounter is inherently lossy and that's
> why we're seeing a drift.
Could you share details about platform, scenario in which 2ms drift per
second is being seen with timecounter.
I did not observe this on SKL.
> Could we be using it wrong?
>
if we use two changes highlighted above with timecounter maybe we will
get same results as your current implementation.
> In the patch above, I think there is still a drift because of the
> potential fractional part loss at every delta we add.
> But it should only be a fraction of a nanosecond multiplied by the
> number of reports over a period of time.
> With a report every 1us, that should still be much less than a 1ms of
> drift over 1s.
>
timecounter interface takes care of fractional parts so that should help us.
we can either go with timecounter or our own implementation provided
conversions are precise.
> We can probably do better by always computing the clock using the
> entire delta rather than the accumulated delta.
>
issue is that the reported clock cycles in the OA report is 32bits LSB
of GPU TS whereas counter is 36bits. Hence we will need to
accumulate the delta. ofc there is assumption that two reports can't be
spaced with count value of 0xffffffff apart.
>>> Timelines of perf i915 tracepoints & OA reports now make a lot more
>>> sense.
>>>
>>> There is still the issue that reading the CPU clock & the RCS
>>> timestamp is inherently not atomic. So there is a delta there.
>>> I think we should add a new i915 perf record type to express the
>>> delta that we measure this way :
>>>
>>> https://github.com/djdeath/linux/commit/7b002cb360483e331053aec0f98433a5bd5c5c3f#diff-9b74bd0cfaa90b601d80713c7bd56be4R2475
>>>
>>> So that userspace knows there might be a global offset between the 2
>>> times and is able to present it.
>> agree on this. Delta ns1-ns0 can be interpreted as max drift.
>>> Measurement on my KBL system were in the order of a few microseconds
>>> (~30us).
>>> I guess we might be able to setup the correlation point better
>>> (masking interruption?) to reduce the delta.
>> already using spin_lock. Do you mean NMI?
>
> I don't actually know much on this point.
> if spin_lock is the best we can do, then that's it :)
>
>>>
>>> Thanks,
>>>
>>> -
>>> Lionel
>>>
>>>
>>> On 07/12/17 00:57, Robert Bragg wrote:
>>>>
>>>>
>>>> On Thu, Dec 7, 2017 at 12:48 AM, Robert Bragg <robert@sixbynine.org
>>>> <mailto:robert@sixbynine.org>> wrote:
>>>>
>>>>
>>>> at least from what I wrote back then it looks like I was seeing
>>>> a drift of a few milliseconds per second on SKL. I vaguely
>>>> recall it being much worse given the frequency constants we had
>>>> for Haswell.
>>>>
>>>>
>>>> Sorry I didn't actually re-read my own message properly before
>>>> referencing it :) Apparently the 2ms per second drift was for
>>>> Haswell, so presumably not quite so bad for SKL.
>>>>
>>>> - Robert
>>>>
>>>>
>>>>
>>>> _______________________________________________
>>>> Intel-gfx mailing list
>>>> Intel-gfx@lists.freedesktop.org
>>>> https://lists.freedesktop.org/mailman/listinfo/intel-gfx
>>>
>>>
>>
>
[-- Attachment #1.2: Type: text/html, Size: 8793 bytes --]
[-- Attachment #2: Type: text/plain, Size: 160 bytes --]
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
next prev parent reply other threads:[~2017-12-26 5:32 UTC|newest]
Thread overview: 35+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-11-15 12:13 [RFC 0/4] GPU/CPU timestamps correlation for relating OA samples with system events Sagar Arun Kamble
2017-11-15 12:13 ` [RFC 1/4] drm/i915/perf: Add support to correlate GPU timestamp with system time Sagar Arun Kamble
2017-11-15 12:25 ` Chris Wilson
2017-11-15 16:41 ` Sagar Arun Kamble
2017-12-05 13:58 ` Lionel Landwerlin
2017-12-06 8:17 ` Sagar Arun Kamble
2017-11-15 12:13 ` [RFC 2/4] drm/i915/perf: Add support for collecting 64 bit timestamps with OA reports Sagar Arun Kamble
2017-12-06 16:01 ` Lionel Landwerlin
2017-12-21 8:38 ` Sagar Arun Kamble
2017-11-15 12:13 ` [RFC 3/4] drm/i915/perf: Extract raw GPU timestamps from " Sagar Arun Kamble
2017-12-06 19:55 ` Lionel Landwerlin
2017-12-21 8:50 ` Sagar Arun Kamble
2017-11-15 12:13 ` [RFC 4/4] drm/i915/perf: Send system clock monotonic time in perf samples Sagar Arun Kamble
2017-11-15 12:31 ` Chris Wilson
2017-11-15 16:51 ` Sagar Arun Kamble
2017-11-15 17:54 ` Sagar Arun Kamble
2017-12-05 14:22 ` Lionel Landwerlin
2017-12-06 8:31 ` Sagar Arun Kamble
2017-11-15 12:30 ` ✗ Fi.CI.BAT: warning for GPU/CPU timestamps correlation for relating OA samples with system events Patchwork
2017-12-05 14:16 ` [RFC 0/4] " Lionel Landwerlin
2017-12-05 14:28 ` Robert Bragg
2017-12-05 14:37 ` Lionel Landwerlin
2017-12-06 9:01 ` Sagar Arun Kamble
2017-12-06 20:02 ` Lionel Landwerlin
2017-12-22 5:15 ` Sagar Arun Kamble
2017-12-22 5:26 ` Sagar Arun Kamble
2017-12-07 0:48 ` Robert Bragg
2017-12-07 0:57 ` Robert Bragg
2017-12-21 12:59 ` Lionel Landwerlin
2017-12-22 9:30 ` Sagar Arun Kamble
2017-12-22 10:16 ` Lionel Landwerlin
2017-12-26 5:32 ` Sagar Arun Kamble [this message]
2017-12-28 17:13 ` Lionel Landwerlin
2018-01-03 5:38 ` Sagar Arun Kamble
2017-12-22 6:06 ` Sagar Arun Kamble
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=04eca028-3705-5a28-b500-089ca19e712c@intel.com \
--to=sagar.a.kamble@intel.com \
--cc=intel-gfx@lists.freedesktop.org \
--cc=lionel.g.landwerlin@intel.com \
--cc=robert@sixbynine.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox