* [PATCH] drm/i915: Allow user to override PWM backlight frequency and duty cycle
@ 2018-01-16 13:40 Alex Ivanov
2018-01-16 14:41 ` ✗ Fi.CI.BAT: failure for " Patchwork
` (4 more replies)
0 siblings, 5 replies; 9+ messages in thread
From: Alex Ivanov @ 2018-01-16 13:40 UTC (permalink / raw)
To: intel-gfx
Since vendor may set bad defaults or user just generally may prefer her health over
display life.
1. Allow overriding of PWM frequency otherwise people use solutions like
http://devbraindom.blogspot.ru/2013/03/eliminate-led-screen-flicker-with-intel.html
which are bad because
I. frequency convertation logic varies from chip to chip, so people set totally wrong
frequences in most cases
II. writing to backlight control registers directly goes into conflict with
i915 driver doing the same
2. Allow to override minimal brightness. Even if vendor limit was totally correct,
it may be too bright to use in night, plus the default will become most likely wrong
now, since frequency was overriden
---
drivers/gpu/drm/i915/i915_params.c | 6 ++++++
drivers/gpu/drm/i915/i915_params.h | 2 ++
drivers/gpu/drm/i915/intel_panel.c | 17 +++++++++++++++++
3 files changed, 25 insertions(+)
diff --git a/drivers/gpu/drm/i915/i915_params.c b/drivers/gpu/drm/i915/i915_params.c
index b4faeb6aa2bd..ba37257846b0 100644
--- a/drivers/gpu/drm/i915/i915_params.c
+++ b/drivers/gpu/drm/i915/i915_params.c
@@ -190,3 +190,9 @@ i915_param_named(enable_dpcd_backlight, bool, 0600,
i915_param_named(enable_gvt, bool, 0400,
"Enable support for Intel GVT-g graphics virtualization host support(default:false)");
+
+i915_param_named_unsafe(backlight_freq, uint, 0400,
+ "Override PWM backlight frequency (set in Hz, 0=ignore [default])");
+
+i915_param_named_unsafe(backlight_min_level, uint, 0400,
+ "Override PWM backlight minimum level (duty cycle, 0=ignore [default])");
diff --git a/drivers/gpu/drm/i915/i915_params.h b/drivers/gpu/drm/i915/i915_params.h
index c7292268ed43..7aba85db3da2 100644
--- a/drivers/gpu/drm/i915/i915_params.h
+++ b/drivers/gpu/drm/i915/i915_params.h
@@ -53,6 +53,8 @@
param(int, edp_vswing, 0) \
param(int, reset, 2) \
param(unsigned int, inject_load_failure, 0) \
+ param(unsigned int, backlight_freq, 0) \
+ param(unsigned int, backlight_min_level, 0) \
/* leave bools at the end to not create holes */ \
param(bool, alpha_support, IS_ENABLED(CONFIG_DRM_I915_ALPHA_SUPPORT)) \
param(bool, enable_cmd_parser, true) \
diff --git a/drivers/gpu/drm/i915/intel_panel.c b/drivers/gpu/drm/i915/intel_panel.c
index adc51e452e3e..f188d7c1d2de 100644
--- a/drivers/gpu/drm/i915/intel_panel.c
+++ b/drivers/gpu/drm/i915/intel_panel.c
@@ -1479,6 +1479,12 @@ static u32 get_backlight_min_vbt(struct intel_connector *connector)
WARN_ON(panel->backlight.max == 0);
+ if (i915_modparams.backlight_min_level) {
+ DRM_DEBUG_KMS("Override backlight duty cycle %u\n",
+ i915_modparams.backlight_min_level);
+ return i915_modparams.backlight_min_level;
+ }
+
/*
* XXX: If the vbt value is 255, it makes min equal to max, which leads
* to problems. There are such machines out there. Either our
@@ -1795,6 +1801,7 @@ int intel_panel_setup_backlight(struct drm_connector *connector, enum pipe pipe)
struct intel_connector *intel_connector = to_intel_connector(connector);
struct intel_panel *panel = &intel_connector->panel;
int ret;
+ u32 pwm;
if (!dev_priv->vbt.backlight.present) {
if (dev_priv->quirks & QUIRK_BACKLIGHT_PRESENT) {
@@ -1812,6 +1819,16 @@ int intel_panel_setup_backlight(struct drm_connector *connector, enum pipe pipe)
/* set level and max in panel struct */
mutex_lock(&dev_priv->backlight_lock);
ret = panel->backlight.setup(intel_connector, pipe);
+ if (i915_modparams.backlight_freq) {
+ if (panel->backlight.hz_to_pwm &&
+ (pwm = panel->backlight.hz_to_pwm(intel_connector, i915_modparams.backlight_freq))) {
+ panel->backlight.max = pwm;
+ DRM_DEBUG_KMS("Override backlight frequency %u Hz\n",
+ i915_modparams.backlight_freq);
+ } else {
+ DRM_DEBUG_KMS("failed to override backlight frequency\n");
+ }
+ }
mutex_unlock(&dev_priv->backlight_lock);
if (ret) {
--
2.15.1
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
^ permalink raw reply related [flat|nested] 9+ messages in thread* ✗ Fi.CI.BAT: failure for drm/i915: Allow user to override PWM backlight frequency and duty cycle 2018-01-16 13:40 [PATCH] drm/i915: Allow user to override PWM backlight frequency and duty cycle Alex Ivanov @ 2018-01-16 14:41 ` Patchwork 2018-01-16 15:36 ` gnidorah 2018-01-17 7:22 ` [PATCH] " Alex Ivanov ` (3 subsequent siblings) 4 siblings, 1 reply; 9+ messages in thread From: Patchwork @ 2018-01-16 14:41 UTC (permalink / raw) To: Alex Ivanov; +Cc: intel-gfx == Series Details == Series: drm/i915: Allow user to override PWM backlight frequency and duty cycle URL : https://patchwork.freedesktop.org/series/36540/ State : failure == Summary == Applying: drm/i915: Allow user to override PWM backlight frequency and duty cycle error: Failed to merge in the changes. Using index info to reconstruct a base tree... M drivers/gpu/drm/i915/i915_params.c M drivers/gpu/drm/i915/i915_params.h M drivers/gpu/drm/i915/intel_panel.c Falling back to patching base and 3-way merge... Auto-merging drivers/gpu/drm/i915/intel_panel.c Auto-merging drivers/gpu/drm/i915/i915_params.h Auto-merging drivers/gpu/drm/i915/i915_params.c CONFLICT (content): Merge conflict in drivers/gpu/drm/i915/i915_params.c Patch failed at 0001 drm/i915: Allow user to override PWM backlight frequency and duty cycle The copy of the patch that failed is found in: .git/rebase-apply/patch When you have resolved this problem, run "git am --continue". If you prefer to skip this patch, run "git am --skip" instead. To restore the original branch and stop patching, run "git am --abort". _______________________________________________ Intel-gfx mailing list Intel-gfx@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/intel-gfx ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: ✗ Fi.CI.BAT: failure for drm/i915: Allow user to override PWM backlight frequency and duty cycle 2018-01-16 14:41 ` ✗ Fi.CI.BAT: failure for " Patchwork @ 2018-01-16 15:36 ` gnidorah 2018-01-16 19:26 ` Saarinen, Jani 0 siblings, 1 reply; 9+ messages in thread From: gnidorah @ 2018-01-16 15:36 UTC (permalink / raw) To: intel-gfx@lists.freedesktop.org What branch CI tests against? I've created the patch against current torvalds/linux 16.01.2018, 17:42, "Patchwork" <patchwork@emeril.freedesktop.org>: > == Series Details == > > Series: drm/i915: Allow user to override PWM backlight frequency and duty cycle > URL : https://patchwork.freedesktop.org/series/36540/ > State : failure > > == Summary == > > Applying: drm/i915: Allow user to override PWM backlight frequency and duty cycle > error: Failed to merge in the changes. > Using index info to reconstruct a base tree... > M drivers/gpu/drm/i915/i915_params.c > M drivers/gpu/drm/i915/i915_params.h > M drivers/gpu/drm/i915/intel_panel.c > Falling back to patching base and 3-way merge... > Auto-merging drivers/gpu/drm/i915/intel_panel.c > Auto-merging drivers/gpu/drm/i915/i915_params.h > Auto-merging drivers/gpu/drm/i915/i915_params.c > CONFLICT (content): Merge conflict in drivers/gpu/drm/i915/i915_params.c > Patch failed at 0001 drm/i915: Allow user to override PWM backlight frequency and duty cycle > The copy of the patch that failed is found in: .git/rebase-apply/patch > When you have resolved this problem, run "git am --continue". > If you prefer to skip this patch, run "git am --skip" instead. > To restore the original branch and stop patching, run "git am --abort". _______________________________________________ Intel-gfx mailing list Intel-gfx@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/intel-gfx ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: ✗ Fi.CI.BAT: failure for drm/i915: Allow user to override PWM backlight frequency and duty cycle 2018-01-16 15:36 ` gnidorah @ 2018-01-16 19:26 ` Saarinen, Jani 0 siblings, 0 replies; 9+ messages in thread From: Saarinen, Jani @ 2018-01-16 19:26 UTC (permalink / raw) To: gnidorah@ya.ru, intel-gfx@lists.freedesktop.org HI, > -----Original Message----- > From: Intel-gfx [mailto:intel-gfx-bounces@lists.freedesktop.org] On Behalf Of > gnidorah@ya.ru > Sent: tiistai 16. tammikuuta 2018 17.36 > To: intel-gfx@lists.freedesktop.org > Subject: Re: [Intel-gfx] ✗ Fi.CI.BAT: failure for drm/i915: Allow user to override > PWM backlight frequency and duty cycle > > What branch CI tests against? https://cgit.freedesktop.org/drm-tip > I've created the patch against current torvalds/linux > > 16.01.2018, 17:42, "Patchwork" <patchwork@emeril.freedesktop.org>: > > == Series Details == > > > > Series: drm/i915: Allow user to override PWM backlight frequency and > > duty cycle URL : https://patchwork.freedesktop.org/series/36540/ > > State : failure > > > > == Summary == > > > > Applying: drm/i915: Allow user to override PWM backlight frequency and > > duty cycle > > error: Failed to merge in the changes. > > Using index info to reconstruct a base tree... > > M drivers/gpu/drm/i915/i915_params.c > > M drivers/gpu/drm/i915/i915_params.h > > M drivers/gpu/drm/i915/intel_panel.c > > Falling back to patching base and 3-way merge... > > Auto-merging drivers/gpu/drm/i915/intel_panel.c > > Auto-merging drivers/gpu/drm/i915/i915_params.h > > Auto-merging drivers/gpu/drm/i915/i915_params.c > > CONFLICT (content): Merge conflict in > > drivers/gpu/drm/i915/i915_params.c > > Patch failed at 0001 drm/i915: Allow user to override PWM backlight > > frequency and duty cycle The copy of the patch that failed is found > > in: .git/rebase-apply/patch When you have resolved this problem, run "git am > --continue". > > If you prefer to skip this patch, run "git am --skip" instead. > > To restore the original branch and stop patching, run "git am --abort". Jani Saarinen Intel Finland Oy - BIC 0357606-4 - Westendinkatu 7, 02160 Espoo _______________________________________________ Intel-gfx mailing list Intel-gfx@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/intel-gfx ^ permalink raw reply [flat|nested] 9+ messages in thread
* [PATCH] drm/i915: Allow user to override PWM backlight frequency and duty cycle 2018-01-16 13:40 [PATCH] drm/i915: Allow user to override PWM backlight frequency and duty cycle Alex Ivanov 2018-01-16 14:41 ` ✗ Fi.CI.BAT: failure for " Patchwork @ 2018-01-17 7:22 ` Alex Ivanov 2018-01-17 7:46 ` ✓ Fi.CI.BAT: success for drm/i915: Allow user to override PWM backlight frequency and duty cycle (rev2) Patchwork ` (2 subsequent siblings) 4 siblings, 0 replies; 9+ messages in thread From: Alex Ivanov @ 2018-01-17 7:22 UTC (permalink / raw) To: intel-gfx Fixed to merge against drm-tip branch Signed-off-by: Alex Ivanov <gnidorah@ya.ru> --- drivers/gpu/drm/i915/i915_params.c | 6 ++++++ drivers/gpu/drm/i915/i915_params.h | 2 ++ drivers/gpu/drm/i915/intel_panel.c | 17 +++++++++++++++++ 3 files changed, 25 insertions(+) diff --git a/drivers/gpu/drm/i915/i915_params.c b/drivers/gpu/drm/i915/i915_params.c index b5f3eb4fa8a3..2a7b0c20f1d0 100644 --- a/drivers/gpu/drm/i915/i915_params.c +++ b/drivers/gpu/drm/i915/i915_params.c @@ -175,6 +175,12 @@ i915_param_named(enable_dpcd_backlight, bool, 0600, i915_param_named(enable_gvt, bool, 0400, "Enable support for Intel GVT-g graphics virtualization host support(default:false)"); +i915_param_named_unsafe(backlight_freq, uint, 0400, + "Override PWM backlight frequency (set in Hz, 0=ignore [default])"); + +i915_param_named_unsafe(backlight_min_level, uint, 0400, + "Override PWM backlight minimum level (duty cycle, 0=ignore [default])"); + static __always_inline void _print_param(struct drm_printer *p, const char *name, const char *type, diff --git a/drivers/gpu/drm/i915/i915_params.h b/drivers/gpu/drm/i915/i915_params.h index c96360398072..5e2c077c6f2c 100644 --- a/drivers/gpu/drm/i915/i915_params.h +++ b/drivers/gpu/drm/i915/i915_params.h @@ -55,6 +55,8 @@ struct drm_printer; param(int, edp_vswing, 0) \ param(int, reset, 2) \ param(unsigned int, inject_load_failure, 0) \ + param(unsigned int, backlight_freq, 0) \ + param(unsigned int, backlight_min_level, 0) \ /* leave bools at the end to not create holes */ \ param(bool, alpha_support, IS_ENABLED(CONFIG_DRM_I915_ALPHA_SUPPORT)) \ param(bool, enable_cmd_parser, true) \ diff --git a/drivers/gpu/drm/i915/intel_panel.c b/drivers/gpu/drm/i915/intel_panel.c index fa6831f8c004..eb5f0665b5f9 100644 --- a/drivers/gpu/drm/i915/intel_panel.c +++ b/drivers/gpu/drm/i915/intel_panel.c @@ -1479,6 +1479,12 @@ static u32 get_backlight_min_vbt(struct intel_connector *connector) WARN_ON(panel->backlight.max == 0); + if (i915_modparams.backlight_min_level) { + DRM_DEBUG_KMS("Override backlight duty cycle %u\n", + i915_modparams.backlight_min_level); + return i915_modparams.backlight_min_level; + } + /* * XXX: If the vbt value is 255, it makes min equal to max, which leads * to problems. There are such machines out there. Either our @@ -1795,6 +1801,7 @@ int intel_panel_setup_backlight(struct drm_connector *connector, enum pipe pipe) struct intel_connector *intel_connector = to_intel_connector(connector); struct intel_panel *panel = &intel_connector->panel; int ret; + u32 pwm; if (!dev_priv->vbt.backlight.present) { if (dev_priv->quirks & QUIRK_BACKLIGHT_PRESENT) { @@ -1812,6 +1819,16 @@ int intel_panel_setup_backlight(struct drm_connector *connector, enum pipe pipe) /* set level and max in panel struct */ mutex_lock(&dev_priv->backlight_lock); ret = panel->backlight.setup(intel_connector, pipe); + if (i915_modparams.backlight_freq) { + if (panel->backlight.hz_to_pwm && + (pwm = panel->backlight.hz_to_pwm(intel_connector, i915_modparams.backlight_freq))) { + panel->backlight.max = pwm; + DRM_DEBUG_KMS("Override backlight frequency %u Hz\n", + i915_modparams.backlight_freq); + } else { + DRM_DEBUG_KMS("failed to override backlight frequency\n"); + } + } mutex_unlock(&dev_priv->backlight_lock); if (ret) { -- 2.15.1 _______________________________________________ Intel-gfx mailing list Intel-gfx@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/intel-gfx ^ permalink raw reply related [flat|nested] 9+ messages in thread
* ✓ Fi.CI.BAT: success for drm/i915: Allow user to override PWM backlight frequency and duty cycle (rev2) 2018-01-16 13:40 [PATCH] drm/i915: Allow user to override PWM backlight frequency and duty cycle Alex Ivanov 2018-01-16 14:41 ` ✗ Fi.CI.BAT: failure for " Patchwork 2018-01-17 7:22 ` [PATCH] " Alex Ivanov @ 2018-01-17 7:46 ` Patchwork 2018-01-17 8:59 ` ✗ Fi.CI.IGT: warning " Patchwork 2018-01-17 13:12 ` [PATCH] drm/i915: Allow user to override PWM backlight frequency and duty cycle Jani Nikula 4 siblings, 0 replies; 9+ messages in thread From: Patchwork @ 2018-01-17 7:46 UTC (permalink / raw) To: Alex Ivanov; +Cc: intel-gfx == Series Details == Series: drm/i915: Allow user to override PWM backlight frequency and duty cycle (rev2) URL : https://patchwork.freedesktop.org/series/36540/ State : success == Summary == Series 36540v2 drm/i915: Allow user to override PWM backlight frequency and duty cycle https://patchwork.freedesktop.org/api/1.0/series/36540/revisions/2/mbox/ fi-bdw-5557u total:288 pass:267 dwarn:0 dfail:0 fail:0 skip:21 time:419s fi-bdw-gvtdvm total:288 pass:264 dwarn:0 dfail:0 fail:0 skip:24 time:425s fi-blb-e6850 total:288 pass:223 dwarn:1 dfail:0 fail:0 skip:64 time:374s fi-bsw-n3050 total:288 pass:242 dwarn:0 dfail:0 fail:0 skip:46 time:484s fi-bwr-2160 total:288 pass:183 dwarn:0 dfail:0 fail:0 skip:105 time:283s fi-bxt-dsi total:288 pass:258 dwarn:0 dfail:0 fail:0 skip:30 time:485s fi-bxt-j4205 total:288 pass:259 dwarn:0 dfail:0 fail:0 skip:29 time:483s fi-byt-j1900 total:288 pass:253 dwarn:0 dfail:0 fail:0 skip:35 time:464s fi-byt-n2820 total:288 pass:249 dwarn:0 dfail:0 fail:0 skip:39 time:461s fi-elk-e7500 total:224 pass:168 dwarn:10 dfail:0 fail:0 skip:45 fi-gdg-551 total:288 pass:179 dwarn:0 dfail:0 fail:1 skip:108 time:276s fi-glk-1 total:288 pass:260 dwarn:0 dfail:0 fail:0 skip:28 time:512s fi-hsw-4770 total:288 pass:261 dwarn:0 dfail:0 fail:0 skip:27 time:390s fi-hsw-4770r total:288 pass:261 dwarn:0 dfail:0 fail:0 skip:27 time:398s fi-ilk-650 total:288 pass:228 dwarn:0 dfail:0 fail:0 skip:60 time:411s fi-ivb-3520m total:288 pass:259 dwarn:0 dfail:0 fail:0 skip:29 time:456s fi-ivb-3770 total:288 pass:255 dwarn:0 dfail:0 fail:0 skip:33 time:411s fi-kbl-7500u total:288 pass:263 dwarn:1 dfail:0 fail:0 skip:24 time:457s fi-kbl-7560u total:288 pass:269 dwarn:0 dfail:0 fail:0 skip:19 time:498s fi-kbl-7567u total:288 pass:268 dwarn:0 dfail:0 fail:0 skip:20 time:452s fi-kbl-r total:288 pass:261 dwarn:0 dfail:0 fail:0 skip:27 time:505s fi-pnv-d510 total:288 pass:222 dwarn:1 dfail:0 fail:0 skip:65 time:573s fi-skl-6260u total:288 pass:268 dwarn:0 dfail:0 fail:0 skip:20 time:436s fi-skl-6600u total:288 pass:261 dwarn:0 dfail:0 fail:0 skip:27 time:510s fi-skl-6700hq total:288 pass:262 dwarn:0 dfail:0 fail:0 skip:26 time:530s fi-skl-6700k2 total:288 pass:264 dwarn:0 dfail:0 fail:0 skip:24 time:486s fi-skl-6770hq total:288 pass:268 dwarn:0 dfail:0 fail:0 skip:20 time:475s fi-skl-gvtdvm total:288 pass:265 dwarn:0 dfail:0 fail:0 skip:23 time:430s fi-snb-2520m total:288 pass:248 dwarn:0 dfail:0 fail:0 skip:40 time:515s fi-snb-2600 total:288 pass:248 dwarn:0 dfail:0 fail:0 skip:40 time:393s Blacklisted hosts: fi-cfl-s2 total:288 pass:262 dwarn:0 dfail:0 fail:0 skip:26 time:573s fi-glk-dsi total:288 pass:257 dwarn:0 dfail:0 fail:1 skip:30 time:483s bf4fa7c9c108a7c8f9a966f940d8df733b4a4b89 drm-tip: 2018y-01m-17d-07h-03m-28s UTC integration manifest c412cd65075d drm/i915: Allow user to override PWM backlight frequency and duty cycle == Logs == For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_7691/issues.html _______________________________________________ Intel-gfx mailing list Intel-gfx@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/intel-gfx ^ permalink raw reply [flat|nested] 9+ messages in thread
* ✗ Fi.CI.IGT: warning for drm/i915: Allow user to override PWM backlight frequency and duty cycle (rev2) 2018-01-16 13:40 [PATCH] drm/i915: Allow user to override PWM backlight frequency and duty cycle Alex Ivanov ` (2 preceding siblings ...) 2018-01-17 7:46 ` ✓ Fi.CI.BAT: success for drm/i915: Allow user to override PWM backlight frequency and duty cycle (rev2) Patchwork @ 2018-01-17 8:59 ` Patchwork 2018-01-17 13:12 ` [PATCH] drm/i915: Allow user to override PWM backlight frequency and duty cycle Jani Nikula 4 siblings, 0 replies; 9+ messages in thread From: Patchwork @ 2018-01-17 8:59 UTC (permalink / raw) To: Alex Ivanov; +Cc: intel-gfx == Series Details == Series: drm/i915: Allow user to override PWM backlight frequency and duty cycle (rev2) URL : https://patchwork.freedesktop.org/series/36540/ State : warning == Summary == Warning: bzip Patchwork_7691/shard-snb5/results0.json.bz2 wasn't in correct JSON format Test gem_eio: Subgroup in-flight: pass -> DMESG-WARN (shard-snb) fdo#104058 Test gem_softpin: Subgroup noreloc-s3: pass -> SKIP (shard-snb) fdo#103375 fail -> SKIP (shard-hsw) fdo#103540 Test pm_rc6_residency: Subgroup rc6-accuracy: pass -> SKIP (shard-snb) Test kms_frontbuffer_tracking: Subgroup fbc-1p-offscren-pri-shrfb-draw-render: fail -> PASS (shard-snb) fdo#101623 fdo#104058 https://bugs.freedesktop.org/show_bug.cgi?id=104058 fdo#103375 https://bugs.freedesktop.org/show_bug.cgi?id=103375 fdo#103540 https://bugs.freedesktop.org/show_bug.cgi?id=103540 fdo#101623 https://bugs.freedesktop.org/show_bug.cgi?id=101623 shard-hsw total:2729 pass:1547 dwarn:1 dfail:0 fail:11 skip:1170 time:8986s shard-snb total:2652 pass:1283 dwarn:2 dfail:0 fail:10 skip:1357 time:7618s Blacklisted hosts: shard-apl total:2630 pass:1634 dwarn:1 dfail:0 fail:23 skip:971 time:13086s shard-kbl total:2726 pass:1800 dwarn:16 dfail:2 fail:26 skip:881 time:10508s == Logs == For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_7691/shards.html _______________________________________________ Intel-gfx mailing list Intel-gfx@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/intel-gfx ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [PATCH] drm/i915: Allow user to override PWM backlight frequency and duty cycle 2018-01-16 13:40 [PATCH] drm/i915: Allow user to override PWM backlight frequency and duty cycle Alex Ivanov ` (3 preceding siblings ...) 2018-01-17 8:59 ` ✗ Fi.CI.IGT: warning " Patchwork @ 2018-01-17 13:12 ` Jani Nikula 2018-01-17 17:49 ` Alex Ivanov 4 siblings, 1 reply; 9+ messages in thread From: Jani Nikula @ 2018-01-17 13:12 UTC (permalink / raw) To: Alex Ivanov, intel-gfx On Tue, 16 Jan 2018, Alex Ivanov <gnidorah@ya.ru> wrote: > Since vendor may set bad defaults or user just generally may prefer her health over > display life. > 1. Allow overriding of PWM frequency otherwise people use solutions like > http://devbraindom.blogspot.ru/2013/03/eliminate-led-screen-flicker-with-intel.html > which are bad because > I. frequency convertation logic varies from chip to chip, so people set totally wrong > frequences in most cases > II. writing to backlight control registers directly goes into conflict with > i915 driver doing the same > 2. Allow to override minimal brightness. Even if vendor limit was totally correct, > it may be too bright to use in night, plus the default will become most likely wrong > now, since frequency was overriden I'm divided. Clearly, the patch at hand is a technically better solution than what the blog post has. But I also think the folks over at the blog know they're directly hacking on graphics registers, and whatever it is they're doing is not supported. There's also warranted speculation this might be harmful to their displays. The modulation frequency and the minimum duty cycle have been chosen by the OEM to work with their board design and display specs. We don't have enough data to validate the values given by the user are within spec. If we add this, it'll get used, it'll be expected to be supported, the "unsafe" there will go unnoticed by folks copy-pasting the parameters from blogs and forums, and if it breaks displays for folks, they'll be angry at us, not at some random blog poster. I guess damned if you do, damned if you don't. BR, Jani. > > --- > drivers/gpu/drm/i915/i915_params.c | 6 ++++++ > drivers/gpu/drm/i915/i915_params.h | 2 ++ > drivers/gpu/drm/i915/intel_panel.c | 17 +++++++++++++++++ > 3 files changed, 25 insertions(+) > > diff --git a/drivers/gpu/drm/i915/i915_params.c b/drivers/gpu/drm/i915/i915_params.c > index b4faeb6aa2bd..ba37257846b0 100644 > --- a/drivers/gpu/drm/i915/i915_params.c > +++ b/drivers/gpu/drm/i915/i915_params.c > @@ -190,3 +190,9 @@ i915_param_named(enable_dpcd_backlight, bool, 0600, > > i915_param_named(enable_gvt, bool, 0400, > "Enable support for Intel GVT-g graphics virtualization host support(default:false)"); > + > +i915_param_named_unsafe(backlight_freq, uint, 0400, > + "Override PWM backlight frequency (set in Hz, 0=ignore [default])"); > + > +i915_param_named_unsafe(backlight_min_level, uint, 0400, > + "Override PWM backlight minimum level (duty cycle, 0=ignore [default])"); > diff --git a/drivers/gpu/drm/i915/i915_params.h b/drivers/gpu/drm/i915/i915_params.h > index c7292268ed43..7aba85db3da2 100644 > --- a/drivers/gpu/drm/i915/i915_params.h > +++ b/drivers/gpu/drm/i915/i915_params.h > @@ -53,6 +53,8 @@ > param(int, edp_vswing, 0) \ > param(int, reset, 2) \ > param(unsigned int, inject_load_failure, 0) \ > + param(unsigned int, backlight_freq, 0) \ > + param(unsigned int, backlight_min_level, 0) \ > /* leave bools at the end to not create holes */ \ > param(bool, alpha_support, IS_ENABLED(CONFIG_DRM_I915_ALPHA_SUPPORT)) \ > param(bool, enable_cmd_parser, true) \ > diff --git a/drivers/gpu/drm/i915/intel_panel.c b/drivers/gpu/drm/i915/intel_panel.c > index adc51e452e3e..f188d7c1d2de 100644 > --- a/drivers/gpu/drm/i915/intel_panel.c > +++ b/drivers/gpu/drm/i915/intel_panel.c > @@ -1479,6 +1479,12 @@ static u32 get_backlight_min_vbt(struct intel_connector *connector) > > WARN_ON(panel->backlight.max == 0); > > + if (i915_modparams.backlight_min_level) { > + DRM_DEBUG_KMS("Override backlight duty cycle %u\n", > + i915_modparams.backlight_min_level); > + return i915_modparams.backlight_min_level; > + } > + > /* > * XXX: If the vbt value is 255, it makes min equal to max, which leads > * to problems. There are such machines out there. Either our > @@ -1795,6 +1801,7 @@ int intel_panel_setup_backlight(struct drm_connector *connector, enum pipe pipe) > struct intel_connector *intel_connector = to_intel_connector(connector); > struct intel_panel *panel = &intel_connector->panel; > int ret; > + u32 pwm; > > if (!dev_priv->vbt.backlight.present) { > if (dev_priv->quirks & QUIRK_BACKLIGHT_PRESENT) { > @@ -1812,6 +1819,16 @@ int intel_panel_setup_backlight(struct drm_connector *connector, enum pipe pipe) > /* set level and max in panel struct */ > mutex_lock(&dev_priv->backlight_lock); > ret = panel->backlight.setup(intel_connector, pipe); > + if (i915_modparams.backlight_freq) { > + if (panel->backlight.hz_to_pwm && > + (pwm = panel->backlight.hz_to_pwm(intel_connector, i915_modparams.backlight_freq))) { > + panel->backlight.max = pwm; > + DRM_DEBUG_KMS("Override backlight frequency %u Hz\n", > + i915_modparams.backlight_freq); > + } else { > + DRM_DEBUG_KMS("failed to override backlight frequency\n"); > + } > + } > mutex_unlock(&dev_priv->backlight_lock); > > if (ret) { -- Jani Nikula, Intel Open Source Technology Center _______________________________________________ Intel-gfx mailing list Intel-gfx@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/intel-gfx ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [PATCH] drm/i915: Allow user to override PWM backlight frequency and duty cycle 2018-01-17 13:12 ` [PATCH] drm/i915: Allow user to override PWM backlight frequency and duty cycle Jani Nikula @ 2018-01-17 17:49 ` Alex Ivanov 0 siblings, 0 replies; 9+ messages in thread From: Alex Ivanov @ 2018-01-17 17:49 UTC (permalink / raw) To: Jani Nikula, intel-gfx@lists.freedesktop.org 17.01.2018, 16:13, "Jani Nikula" <jani.nikula@linux.intel.com>: > I'm divided. Clearly, the patch at hand is a technically better solution > than what the blog post has. > > But I also think the folks over at the blog know they're directly > hacking on graphics registers, and whatever it is they're doing is not > supported. There's also warranted speculation this might be harmful to > their displays. But those using such calculators and guides don't know what precisely they are doing, because authors only provided setup logic for *their own* hardware, and not for other chips. This leads to more harm than it should would be there an official way for doing overrides. > The modulation frequency and the minimum duty cycle have been chosen by > the OEM to work with their board design and display specs. Unfortunately some vendors tend to use "whatever defaults" that are not good for humans. That's the reason why people poke with PWM registers. > We don't have enough data to validate the values given by the user are within spec. If > we add this, it'll get used, it'll be expected to be supported, the > "unsafe" there will go unnoticed by folks copy-pasting the parameters > from blogs and forums I can rename the knobs into e.g. "debug_backlight_freq" and "debug_backlight_min_level" and add warnings to descriptions so there will be FAT warnings. > and if it breaks displays for folks, they'll be > angry at us, not at some random blog poster. The license on i915 driver says that its provided "as is" without any warranty. With added warnings on kernel parameters people MUST know what they're doing and take all responsibility. > > I guess damned if you do, damned if you don't. > > BR, > Jani. > _______________________________________________ Intel-gfx mailing list Intel-gfx@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/intel-gfx ^ permalink raw reply [flat|nested] 9+ messages in thread
end of thread, other threads:[~2018-01-17 17:49 UTC | newest] Thread overview: 9+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2018-01-16 13:40 [PATCH] drm/i915: Allow user to override PWM backlight frequency and duty cycle Alex Ivanov 2018-01-16 14:41 ` ✗ Fi.CI.BAT: failure for " Patchwork 2018-01-16 15:36 ` gnidorah 2018-01-16 19:26 ` Saarinen, Jani 2018-01-17 7:22 ` [PATCH] " Alex Ivanov 2018-01-17 7:46 ` ✓ Fi.CI.BAT: success for drm/i915: Allow user to override PWM backlight frequency and duty cycle (rev2) Patchwork 2018-01-17 8:59 ` ✗ Fi.CI.IGT: warning " Patchwork 2018-01-17 13:12 ` [PATCH] drm/i915: Allow user to override PWM backlight frequency and duty cycle Jani Nikula 2018-01-17 17:49 ` Alex Ivanov
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox