From: Daniel Vetter <daniel.vetter@ffwll.ch>
To: Intel Graphics Development <intel-gfx@lists.freedesktop.org>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Subject: [PATCH 4/5] drm/i915: rip out dp port enabling cludges^Wchecks
Date: Thu, 6 Sep 2012 22:15:43 +0200 [thread overview]
Message-ID: <1346962544-7439-5-git-send-email-daniel.vetter@ffwll.ch> (raw)
In-Reply-To: <1346962544-7439-1-git-send-email-daniel.vetter@ffwll.ch>
These have been added because dp links are fiddle things and don't
like it when we try to re-train an enabled output (or disable a
disabled output harder). And because the crtc helper code is
ridiculously bad add tracking the modeset state.
But with the new code in place it is simply a bug to disable a disabled
encoder or to enable an enabled encoder again. Hence convert these to
WARNs (and bail out for safety), but flatten all conditionals in the
code itself.
Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
---
drivers/gpu/drm/i915/intel_dp.c | 16 ++++++++--------
1 file changed, 8 insertions(+), 8 deletions(-)
diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
index 7c746d1..07f9521 100644
--- a/drivers/gpu/drm/i915/intel_dp.c
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -1333,15 +1333,15 @@ static void intel_enable_dp(struct intel_encoder *encoder)
struct drm_i915_private *dev_priv = dev->dev_private;
uint32_t dp_reg = I915_READ(intel_dp->output_reg);
+ if (WARN_ON(dp_reg & DP_PORT_EN))
+ return;
+
ironlake_edp_panel_vdd_on(intel_dp);
intel_dp_sink_dpms(intel_dp, DRM_MODE_DPMS_ON);
- if (!(dp_reg & DP_PORT_EN)) {
- intel_dp_start_link_train(intel_dp);
- ironlake_edp_panel_on(intel_dp);
- ironlake_edp_panel_vdd_off(intel_dp, true);
- intel_dp_complete_link_train(intel_dp);
- } else
- ironlake_edp_panel_vdd_off(intel_dp, false);
+ intel_dp_start_link_train(intel_dp);
+ ironlake_edp_panel_on(intel_dp);
+ ironlake_edp_panel_vdd_off(intel_dp, true);
+ intel_dp_complete_link_train(intel_dp);
ironlake_edp_backlight_on(intel_dp);
}
@@ -1913,7 +1913,7 @@ intel_dp_link_down(struct intel_dp *intel_dp)
struct drm_i915_private *dev_priv = dev->dev_private;
uint32_t DP = intel_dp->DP;
- if ((I915_READ(intel_dp->output_reg) & DP_PORT_EN) == 0)
+ if (WARN_ON((I915_READ(intel_dp->output_reg) & DP_PORT_EN) == 0))
return;
DRM_DEBUG_KMS("\n");
--
1.7.11.2
next prev parent reply other threads:[~2012-09-06 21:23 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-09-06 20:15 [PATCH 0/5] cpu edp fixes Daniel Vetter
2012-09-06 20:15 ` [PATCH 1/5] drm/i915: add encoder->pre_enable/post_disable Daniel Vetter
2012-09-12 13:48 ` Paulo Zanoni
2012-09-06 20:15 ` [PATCH 2/5] drm/i915: clean up the cpu edp pll special case Daniel Vetter
2012-09-12 21:00 ` Paulo Zanoni
2012-09-13 15:23 ` Daniel Vetter
2012-09-06 20:15 ` [PATCH 3/5] drm/i915: robustify edp_pll_on/off Daniel Vetter
2012-09-13 17:46 ` Paulo Zanoni
2012-09-13 19:22 ` Daniel Vetter
2012-09-13 19:27 ` Daniel Vetter
2012-09-06 20:15 ` Daniel Vetter [this message]
2012-09-13 18:27 ` [PATCH 4/5] drm/i915: rip out dp port enabling cludges^Wchecks Paulo Zanoni
2012-09-06 20:15 ` [PATCH 5/5] drm/i915: disable the cpu edp port after the cpu pipe Daniel Vetter
2012-09-13 19:11 ` Paulo Zanoni
2012-09-13 19:17 ` Daniel Vetter
2012-09-13 19:43 ` Paulo Zanoni
2012-09-13 21:12 ` Daniel Vetter
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1346962544-7439-5-git-send-email-daniel.vetter@ffwll.ch \
--to=daniel.vetter@ffwll.ch \
--cc=intel-gfx@lists.freedesktop.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox