Intel-GFX Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Ben Widawsky <ben@bwidawsk.net>
To: intel-gfx@lists.freedesktop.org
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>, Ben Widawsky <ben@bwidawsk.net>
Subject: [PATCH 6/7 v4] drm/i915: Add setters for min/max frequency
Date: Wed, 12 Sep 2012 18:12:07 -0700	[thread overview]
Message-ID: <1347498727-10131-1-git-send-email-ben@bwidawsk.net> (raw)
In-Reply-To: <20120912144619.GO5533@phenom.ffwll.local>

Provide a standardized sysfs interface for setting min, and max
frequencies.  The code which reads the limits were lifted from the
debugfs files. As a brief explanation, the limits are similar to the CPU
p-states. We have 3 states:

RP0 - ie. max frequency
RP1 - ie. "preferred min" frequency
RPn - seriously lowest frequency

Initially Daniel asked me to clamp the writes to supported values, but
in conforming to the way the cpufreq drivers seem to work, instead
return -EINVAL (noticed by Jesse in discussion).
The values can be used by userspace wishing to control the limits of the
GPU (see the CC list for people who care).

v4: Make exceeding the soft limits return -EINVAL as well (Daniel)

v3: bug fix (Ben) -  was passing the MHz value to gen6_set_rps instead of
the step value. To fix, deal only with step values by doing the divide
at the top.

v2: add the dropped mutex_unlock in error cases (Chris)
EINVAL on both too min, or too max (Daniel)

v2 Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
CC: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
---
 drivers/gpu/drm/i915/i915_sysfs.c | 83 ++++++++++++++++++++++++++++++++++++++-
 1 file changed, 81 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/i915/i915_sysfs.c b/drivers/gpu/drm/i915/i915_sysfs.c
index 1da07e3..1ffb988 100644
--- a/drivers/gpu/drm/i915/i915_sysfs.c
+++ b/drivers/gpu/drm/i915/i915_sysfs.c
@@ -238,6 +238,45 @@ static ssize_t gt_max_freq_mhz_show(struct device *kdev, struct device_attribute
 	return snprintf(buf, PAGE_SIZE, "%d", ret);
 }
 
+static ssize_t gt_max_freq_mhz_store(struct device *kdev,
+				     struct device_attribute *attr,
+				     const char *buf, size_t count)
+{
+	struct drm_minor *minor = container_of(kdev, struct drm_minor, kdev);
+	struct drm_device *dev = minor->dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	u32 val, rp_state_cap, hw_max, hw_min;
+	ssize_t ret;
+
+	ret = kstrtou32(buf, 0, &val);
+	if (ret)
+		return ret;
+
+	val /= GT_FREQUENCY_MULTIPLIER;
+
+	ret = mutex_lock_interruptible(&dev->struct_mutex);
+	if (ret)
+		return ret;
+
+	rp_state_cap = I915_READ(GEN6_RP_STATE_CAP);
+	hw_max = (rp_state_cap & 0xff);
+	hw_min = ((rp_state_cap & 0xff0000) >> 16);
+
+	if (val < hw_min || val > hw_max || val < dev_priv->rps.min_delay) {
+		mutex_unlock(&dev->struct_mutex);
+		return -EINVAL;
+	}
+
+	if (dev_priv->rps.cur_delay > val)
+		gen6_set_rps(dev_priv->dev, val);
+
+	dev_priv->rps.max_delay = val;
+
+	mutex_unlock(&dev->struct_mutex);
+
+	return count;
+}
+
 static ssize_t gt_min_freq_mhz_show(struct device *kdev, struct device_attribute *attr, char *buf)
 {
 	struct drm_minor *minor = container_of(kdev, struct drm_minor, kdev);
@@ -255,9 +294,49 @@ static ssize_t gt_min_freq_mhz_show(struct device *kdev, struct device_attribute
 	return snprintf(buf, PAGE_SIZE, "%d", ret);
 }
 
+static ssize_t gt_min_freq_mhz_store(struct device *kdev,
+				     struct device_attribute *attr,
+				     const char *buf, size_t count)
+{
+	struct drm_minor *minor = container_of(kdev, struct drm_minor, kdev);
+	struct drm_device *dev = minor->dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	u32 val, rp_state_cap, hw_max, hw_min;
+	ssize_t ret;
+
+	ret = kstrtou32(buf, 0, &val);
+	if (ret)
+		return ret;
+
+	val /= GT_FREQUENCY_MULTIPLIER;
+
+	ret = mutex_lock_interruptible(&dev->struct_mutex);
+	if (ret)
+		return ret;
+
+	rp_state_cap = I915_READ(GEN6_RP_STATE_CAP);
+	hw_max = (rp_state_cap & 0xff);
+	hw_min = ((rp_state_cap & 0xff0000) >> 16);
+
+	if (val < hw_min || val > hw_max || val > dev_priv->rps.max_delay) {
+		mutex_unlock(&dev->struct_mutex);
+		return -EINVAL;
+	}
+
+	if (dev_priv->rps.cur_delay < val)
+		gen6_set_rps(dev_priv->dev, val);
+
+	dev_priv->rps.min_delay = val;
+
+	mutex_unlock(&dev->struct_mutex);
+
+	return count;
+
+}
+
 static DEVICE_ATTR(gt_cur_freq_mhz, S_IRUGO, gt_cur_freq_mhz_show, NULL);
-static DEVICE_ATTR(gt_max_freq_mhz, S_IRUGO | S_IWUSR, gt_max_freq_mhz_show, NULL);
-static DEVICE_ATTR(gt_min_freq_mhz, S_IRUGO | S_IWUSR, gt_min_freq_mhz_show, NULL);
+static DEVICE_ATTR(gt_max_freq_mhz, S_IRUGO | S_IWUSR, gt_max_freq_mhz_show, gt_max_freq_mhz_store);
+static DEVICE_ATTR(gt_min_freq_mhz, S_IRUGO | S_IWUSR, gt_min_freq_mhz_show, gt_min_freq_mhz_store);
 
 static const struct attribute *gen6_attrs[] = {
 	&dev_attr_gt_cur_freq_mhz.attr,
-- 
1.7.12

  reply	other threads:[~2012-09-13  1:12 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-09-08  2:43 [PATCH 0/8 v2] Moar sysfs stuff Ben Widawsky
2012-09-08  2:43 ` [REPOST PATCH 1/7] drm/i915: variable renames Ben Widawsky
2012-09-08  2:43 ` [REPOST PATCH 2/7] drm/i915: #define gpu freq multipler Ben Widawsky
2012-09-08  2:43 ` [REPOST PATCH 3/7 v2] drm/i915: Add current/max/min GPU freq to sysfs Ben Widawsky
2012-09-08  2:43 ` [PATCH 4/7] drm/i915: POSTING_READ the new rps value Ben Widawsky
2012-09-09 18:26   ` Chris Wilson
2012-09-08  2:43 ` [PATCH 5/7] drm/i915: Error checks in gen6_set_rps Ben Widawsky
2012-09-09 18:25   ` Chris Wilson
2012-09-12 21:37     ` Daniel Vetter
2012-09-08  2:43 ` [PATCH 6/7 v3] drm/i915: Add setters for min/max frequency Ben Widawsky
2012-09-12 14:46   ` Daniel Vetter
2012-09-13  1:12     ` Ben Widawsky [this message]
2012-09-08  2:43 ` [REPOST PATCH 7/7] drm/i915: Show render P state thresholds in sysfs Ben Widawsky
2012-09-14 16:51   ` Daniel Vetter
2012-09-08  2:43 ` [PATCH] sysfs rps test added Ben Widawsky
2012-09-14 18:32   ` Daniel Vetter

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1347498727-10131-1-git-send-email-ben@bwidawsk.net \
    --to=ben@bwidawsk.net \
    --cc=daniel.vetter@ffwll.ch \
    --cc=intel-gfx@lists.freedesktop.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox