public inbox for intel-gfx@lists.freedesktop.org
 help / color / mirror / Atom feed
From: Paulo Zanoni <przanoni@gmail.com>
To: intel-gfx@lists.freedesktop.org
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Subject: [PATCH 05/14] drm/i915: add DP support to intel_ddi_mode_set
Date: Mon, 15 Oct 2012 15:51:33 -0300	[thread overview]
Message-ID: <1350327102-4463-6-git-send-email-przanoni@gmail.com> (raw)
In-Reply-To: <1350327102-4463-1-git-send-email-przanoni@gmail.com>

From: Paulo Zanoni <paulo.r.zanoni@intel.com>

Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
---
 drivers/gpu/drm/i915/intel_ddi.c | 61 +++++++++++++++++++++++++++++-----------
 drivers/gpu/drm/i915/intel_dp.c  | 28 ++++++++++--------
 drivers/gpu/drm/i915/intel_drv.h |  1 +
 3 files changed, 62 insertions(+), 28 deletions(-)

diff --git a/drivers/gpu/drm/i915/intel_ddi.c b/drivers/gpu/drm/i915/intel_ddi.c
index 4f03b1b..c6ddba9 100644
--- a/drivers/gpu/drm/i915/intel_ddi.c
+++ b/drivers/gpu/drm/i915/intel_ddi.c
@@ -644,28 +644,55 @@ void intel_ddi_mode_set(struct drm_encoder *encoder,
 {
 	struct drm_crtc *crtc = encoder->crtc;
 	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
-	struct intel_hdmi *intel_hdmi = enc_to_intel_hdmi(encoder);
-	int port = intel_hdmi->ddi_port;
+	struct intel_encoder *intel_encoder = to_intel_encoder(encoder);
+	int port = intel_ddi_get_encoder_port(intel_encoder);
 	int pipe = intel_crtc->pipe;
+	int type = intel_encoder->type;
 
-	/* On Haswell, we need to enable the clocks and prepare DDI function to
-	 * work in HDMI mode for this pipe.
-	 */
-	DRM_DEBUG_KMS("Preparing HDMI DDI mode for Haswell on port %c, pipe %c\n", port_name(port), pipe_name(pipe));
+	DRM_DEBUG_KMS("Preparing DDI mode for Haswell on port %c, pipe %c\n",
+		      port_name(port), pipe_name(pipe));
 
-	if (intel_hdmi->has_audio) {
-		/* Proper support for digital audio needs a new logic and a new set
-		 * of registers, so we leave it for future patch bombing.
-		 */
-		DRM_DEBUG_DRIVER("HDMI audio on pipe %c on DDI\n",
-				 pipe_name(intel_crtc->pipe));
+	if (type == INTEL_OUTPUT_DISPLAYPORT || type == INTEL_OUTPUT_EDP) {
+		struct intel_dp *intel_dp = enc_to_intel_dp(encoder);
 
-		/* write eld */
-		DRM_DEBUG_DRIVER("HDMI audio: write eld information\n");
-		intel_write_eld(encoder, adjusted_mode);
-	}
+		intel_dp->DP = DDI_BUF_CTL_ENABLE | DDI_BUF_EMP_400MV_0DB_HSW;
+		switch (intel_dp->lane_count) {
+		case 1:
+			intel_dp->DP |= DDI_PORT_WIDTH_X1;
+			break;
+		case 2:
+			intel_dp->DP |= DDI_PORT_WIDTH_X2;
+			break;
+		case 4:
+			intel_dp->DP |= DDI_PORT_WIDTH_X4;
+			break;
+		default:
+			intel_dp->DP |= DDI_PORT_WIDTH_X4;
+			WARN(1, "Unexpected DP lane count %d\n",
+			     intel_dp->lane_count);
+			break;
+		}
+
+		intel_dp_init_link_config(intel_dp);
 
-	intel_hdmi->set_infoframes(encoder, adjusted_mode);
+	} else if (type == INTEL_OUTPUT_HDMI) {
+		struct intel_hdmi *intel_hdmi = enc_to_intel_hdmi(encoder);
+
+		if (intel_hdmi->has_audio) {
+			/* Proper support for digital audio needs a new logic
+			 * and a new set of registers, so we leave it for future
+			 * patch bombing.
+			 */
+			DRM_DEBUG_DRIVER("HDMI audio on pipe %c on DDI\n",
+					 pipe_name(intel_crtc->pipe));
+
+			/* write eld */
+			DRM_DEBUG_DRIVER("HDMI audio: write eld information\n");
+			intel_write_eld(encoder, adjusted_mode);
+		}
+
+		intel_hdmi->set_infoframes(encoder, adjusted_mode);
+	}
 }
 
 static struct intel_encoder *
diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
index 871bc17..3fa71cd 100644
--- a/drivers/gpu/drm/i915/intel_dp.c
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -815,6 +815,21 @@ intel_dp_set_m_n(struct drm_crtc *crtc, struct drm_display_mode *mode,
 	}
 }
 
+void intel_dp_init_link_config(struct intel_dp *intel_dp)
+{
+	memset(intel_dp->link_configuration, 0, DP_LINK_CONFIGURATION_SIZE);
+	intel_dp->link_configuration[0] = intel_dp->link_bw;
+	intel_dp->link_configuration[1] = intel_dp->lane_count;
+	intel_dp->link_configuration[8] = DP_SET_ANSI_8B10B;
+	/*
+	 * Check for DPCD version > 1.1 and enhanced framing support
+	 */
+	if (intel_dp->dpcd[DP_DPCD_REV] >= 0x11 &&
+	    (intel_dp->dpcd[DP_MAX_LANE_COUNT] & DP_ENHANCED_FRAME_CAP)) {
+		intel_dp->link_configuration[1] |= DP_LANE_COUNT_ENHANCED_FRAME_EN;
+	}
+}
+
 static void
 intel_dp_mode_set(struct drm_encoder *encoder, struct drm_display_mode *mode,
 		  struct drm_display_mode *adjusted_mode)
@@ -867,17 +882,8 @@ intel_dp_mode_set(struct drm_encoder *encoder, struct drm_display_mode *mode,
 		intel_dp->DP |= DP_AUDIO_OUTPUT_ENABLE;
 		intel_write_eld(encoder, adjusted_mode);
 	}
-	memset(intel_dp->link_configuration, 0, DP_LINK_CONFIGURATION_SIZE);
-	intel_dp->link_configuration[0] = intel_dp->link_bw;
-	intel_dp->link_configuration[1] = intel_dp->lane_count;
-	intel_dp->link_configuration[8] = DP_SET_ANSI_8B10B;
-	/*
-	 * Check for DPCD version > 1.1 and enhanced framing support
-	 */
-	if (intel_dp->dpcd[DP_DPCD_REV] >= 0x11 &&
-	    (intel_dp->dpcd[DP_MAX_LANE_COUNT] & DP_ENHANCED_FRAME_CAP)) {
-		intel_dp->link_configuration[1] |= DP_LANE_COUNT_ENHANCED_FRAME_EN;
-	}
+
+	intel_dp_init_link_config(intel_dp);
 
 	/* Split out the IBX/CPU vs CPT settings */
 
diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
index ed75a36..d89d428 100644
--- a/drivers/gpu/drm/i915/intel_drv.h
+++ b/drivers/gpu/drm/i915/intel_drv.h
@@ -422,6 +422,7 @@ extern void intel_dp_init(struct drm_device *dev, int output_reg,
 void
 intel_dp_set_m_n(struct drm_crtc *crtc, struct drm_display_mode *mode,
 		 struct drm_display_mode *adjusted_mode);
+extern void intel_dp_init_link_config(struct intel_dp *intel_dp);
 extern bool intel_dpd_is_edp(struct drm_device *dev);
 extern void intel_edp_link_config(struct intel_encoder *, int *, int *);
 extern int intel_edp_target_clock(struct intel_encoder *,
-- 
1.7.11.4

  parent reply	other threads:[~2012-10-15 18:52 UTC|newest]

Thread overview: 34+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-10-15 18:51 [PATCH 00/14] Haswell DP enablement Paulo Zanoni
2012-10-15 18:51 ` [PATCH 01/14] drm/i915: add DP support to intel_ddi_enable_pipe_func Paulo Zanoni
2012-10-16 10:04   ` Jani Nikula
2012-10-15 18:51 ` [PATCH 02/14] drm/i915: add intel_ddi_set_pipe_settings Paulo Zanoni
2012-10-16  8:05   ` Jani Nikula
2012-10-15 18:51 ` [PATCH 03/14] drm/i915: add DP support to intel_ddi_pll_mode_set Paulo Zanoni
2012-10-15 18:51 ` [PATCH 04/14] drm/i915: add DP support to intel_ddi_disable_port Paulo Zanoni
2012-10-16 10:05   ` Jani Nikula
2012-10-15 18:51 ` Paulo Zanoni [this message]
2012-10-18 18:00   ` [PATCH 05/14] drm/i915: add DP support to intel_ddi_mode_set Lespiau, Damien
2012-10-15 18:51 ` [PATCH 06/14] drm/i915: add basic Haswell DP link train bits Paulo Zanoni
2012-10-16 11:47   ` Jani Nikula
2012-10-15 18:51 ` [PATCH 07/14] drm/i915: use TU_SIZE macro at intel_dp_set_m_n Paulo Zanoni
2012-10-16 11:49   ` Jani Nikula
2012-10-17 20:27     ` Daniel Vetter
2012-10-18 17:14       ` Paulo Zanoni
2012-10-18 19:36         ` Daniel Vetter
2012-10-15 18:51 ` [PATCH 08/14] drm/i915: fix Haswell DP M/N registers Paulo Zanoni
2012-10-15 20:29   ` Adam Jackson
2012-10-15 20:39     ` Daniel Vetter
2012-10-15 20:45       ` Paulo Zanoni
2012-10-18 15:42   ` [PATCH 08/83] " Paulo Zanoni
2012-10-15 18:51 ` [PATCH 09/14] drm/i915: fix DP AUX register definitions on Haswell Paulo Zanoni
2012-10-18 13:57   ` Lespiau, Damien
2012-10-15 18:51 ` [PATCH 10/14] drm/i915: add DP support to intel_ddi_get_encoder_port Paulo Zanoni
2012-10-18 14:06   ` Lespiau, Damien
2012-10-15 18:51 ` [PATCH 11/14] drm/i915: add DP support to intel_ddi_get_hw_state Paulo Zanoni
2012-10-18 14:14   ` Lespiau, Damien
2012-10-15 18:51 ` [PATCH 12/14] drm/i915: add DP support to intel_enable_ddi Paulo Zanoni
2012-10-18 14:20   ` Lespiau, Damien
2012-10-15 18:51 ` [PATCH 13/14] drm/i915: implement Haswell DP link train sequence Paulo Zanoni
2012-10-18 17:34   ` Lespiau, Damien
2012-10-15 18:51 ` [PATCH 14/14] drm/i915: set the correct function pointers for Haswell DP Paulo Zanoni
2012-10-18 17:36   ` Lespiau, Damien

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1350327102-4463-6-git-send-email-przanoni@gmail.com \
    --to=przanoni@gmail.com \
    --cc=intel-gfx@lists.freedesktop.org \
    --cc=paulo.r.zanoni@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox