[PATCH 1/2] drm/i915: Fix sprite offset on HSW

[Damien Lespiau <damien.lespiau@gmail.com>]

From: Damien Lespiau <damien.lespiau@intel.com>

HSW consolidates SPRTILEOFF and SPRLINOFF into a single SPROFFSET
register.

v2: Remove a useless level of indentation (Paulo Zanoni)

Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com> (v1)
---
 drivers/gpu/drm/i915/i915_reg.h     | 3 +++
 drivers/gpu/drm/i915/intel_sprite.c | 8 +++++++-
 2 files changed, 10 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index 1c20df2..9995209 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -3223,6 +3223,7 @@
 #define _SPRA_SURF		0x7029c
 #define _SPRA_KEYMAX		0x702a0
 #define _SPRA_TILEOFF		0x702a4
+#define _SPRA_OFFSET		0x702a4
 #define _SPRA_SCALE		0x70304
 #define   SPRITE_SCALE_ENABLE	(1<<31)
 #define   SPRITE_FILTER_MASK	(3<<29)
@@ -3243,6 +3244,7 @@
 #define _SPRB_SURF		0x7129c
 #define _SPRB_KEYMAX		0x712a0
 #define _SPRB_TILEOFF		0x712a4
+#define _SPRB_OFFSET		0x712a4
 #define _SPRB_SCALE		0x71304
 #define _SPRB_GAMC		0x71400
 
@@ -3256,6 +3258,7 @@
 #define SPRSURF(pipe) _PIPE(pipe, _SPRA_SURF, _SPRB_SURF)
 #define SPRKEYMAX(pipe) _PIPE(pipe, _SPRA_KEYMAX, _SPRB_KEYMAX)
 #define SPRTILEOFF(pipe) _PIPE(pipe, _SPRA_TILEOFF, _SPRB_TILEOFF)
+#define SPROFFSET(pipe) _PIPE(pipe, _SPRA_OFFSET, _SPRB_OFFSET)
 #define SPRSCALE(pipe) _PIPE(pipe, _SPRA_SCALE, _SPRB_SCALE)
 #define SPRGAMC(pipe) _PIPE(pipe, _SPRA_GAMC, _SPRB_GAMC)
 
diff --git a/drivers/gpu/drm/i915/intel_sprite.c b/drivers/gpu/drm/i915/intel_sprite.c
index fa68e2a..1cb8ac2 100644
--- a/drivers/gpu/drm/i915/intel_sprite.c
+++ b/drivers/gpu/drm/i915/intel_sprite.c
@@ -127,7 +127,12 @@ ivb_update_plane(struct drm_plane *plane, struct drm_framebuffer *fb,
 
 	I915_WRITE(SPRSTRIDE(pipe), fb->pitches[0]);
 	I915_WRITE(SPRPOS(pipe), (crtc_y << 16) | crtc_x);
-	if (obj->tiling_mode != I915_TILING_NONE) {
+
+	if (IS_HASWELL(dev)) {
+		/* HSW consolidates SPRTILEOFF and SPRLINOFF into a single
+		 * SPROFFSET register */
+		I915_WRITE(SPROFFSET(pipe), (y << 16) | x);
+	} else if (obj->tiling_mode != I915_TILING_NONE) {
 		I915_WRITE(SPRTILEOFF(pipe), (y << 16) | x);
 	} else {
 		unsigned long offset;
@@ -135,6 +140,7 @@ ivb_update_plane(struct drm_plane *plane, struct drm_framebuffer *fb,
 		offset = y * fb->pitches[0] + x * (fb->bits_per_pixel / 8);
 		I915_WRITE(SPRLINOFF(pipe), offset);
 	}
+
 	I915_WRITE(SPRSIZE(pipe), (crtc_h << 16) | crtc_w);
 	if (intel_plane->can_scale)
 		I915_WRITE(SPRSCALE(pipe), sprscale);
-- 
1.7.11.7