Intel-GFX Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Egbert Eich <eich@suse.de>
To: intel-gfx@lists.freedesktop.org
Cc: Egbert Eich <eich@suse.de>,
	Daniel Vetter <daniel.vetter@intel.com>,
	Chris Wilson <chris.wilson@intel.com>,
	Rodrigo Vivi <rodrigo.vivi@intel.com>
Subject: [PATCH 3/8] drm/i915: Add hpd status bit to struct intel_connector.
Date: Thu, 10 Jan 2013 10:02:41 -0500	[thread overview]
Message-ID: <1357830166-18049-4-git-send-email-eich@suse.de> (raw)
In-Reply-To: <1357830166-18049-1-git-send-email-eich@suse.de>

To be able to map an HPD interrupt to a connector add the
hpd status bit to the intel_connector structure.

Signed-off-by: Egbert Eich <eich@suse.de>
---
 drivers/gpu/drm/i915/intel_crt.c  |    3 ++-
 drivers/gpu/drm/i915/intel_dp.c   |    3 ++-
 drivers/gpu/drm/i915/intel_drv.h  |    3 +++
 drivers/gpu/drm/i915/intel_hdmi.c |    3 ++-
 drivers/gpu/drm/i915/intel_sdvo.c |   11 ++++++++++-
 5 files changed, 19 insertions(+), 4 deletions(-)

diff --git a/drivers/gpu/drm/i915/intel_crt.c b/drivers/gpu/drm/i915/intel_crt.c
index 0cd9ff0..75298ce 100644
--- a/drivers/gpu/drm/i915/intel_crt.c
+++ b/drivers/gpu/drm/i915/intel_crt.c
@@ -797,7 +797,8 @@ void intel_crt_init(struct drm_device *dev)
 	 */
 	crt->force_hotplug_required = 0;
 
-	dev_priv->hotplug_supported_mask |= intel_crt_hotplug_int_status(dev);
+	intel_connector->hpd_status_bit = intel_crt_hotplug_int_status(dev);
+	dev_priv->hotplug_supported_mask |= intel_connector->hpd_status_bit;
 
 	/*
 	 * TODO: find a proper way to discover whether we need to set the
diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
index 1946b5b..b97eb76 100644
--- a/drivers/gpu/drm/i915/intel_dp.c
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -2766,7 +2766,8 @@ intel_dp_init_connector(struct intel_digital_port *intel_dig_port,
 		WARN(1, "Invalid port %c\n", port_name(port));
 		break;
 	}
-	dev_priv->hotplug_supported_mask |= intel_hotplug_int_status(dev, port);
+	intel_connector->hpd_status_bit = intel_hotplug_int_status(dev, port);
+	dev_priv->hotplug_supported_mask |= intel_connector->hpd_status_bit;
 
 	if (is_edp(intel_dp))
 		intel_dp_init_panel_power_sequencer(dev, intel_dp);
diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
index 8a1bd4a..a251036 100644
--- a/drivers/gpu/drm/i915/intel_drv.h
+++ b/drivers/gpu/drm/i915/intel_drv.h
@@ -191,6 +191,9 @@ struct intel_connector {
 
 	/* Cached EDID for eDP and LVDS. May hold ERR_PTR for invalid EDID. */
 	struct edid *edid;
+
+	/* hpd status bit for this connector */
+	u32 hpd_status_bit;
 };
 
 struct intel_crtc {
diff --git a/drivers/gpu/drm/i915/intel_hdmi.c b/drivers/gpu/drm/i915/intel_hdmi.c
index d20f9ff..9099b6dc 100644
--- a/drivers/gpu/drm/i915/intel_hdmi.c
+++ b/drivers/gpu/drm/i915/intel_hdmi.c
@@ -992,7 +992,8 @@ void intel_hdmi_init_connector(struct intel_digital_port *intel_dig_port,
 	default:
 		BUG();
 	}
-	dev_priv->hotplug_supported_mask |= intel_hotplug_int_status(dev, port);
+	intel_connector->hpd_status_bit = intel_hotplug_int_status(dev, port);
+	dev_priv->hotplug_supported_mask |= intel_connector->hpd_status_bit;
 
 	if (!HAS_PCH_SPLIT(dev)) {
 		intel_hdmi->write_infoframe = g4x_write_infoframe;
diff --git a/drivers/gpu/drm/i915/intel_sdvo.c b/drivers/gpu/drm/i915/intel_sdvo.c
index 567846e..c99bb9d 100644
--- a/drivers/gpu/drm/i915/intel_sdvo.c
+++ b/drivers/gpu/drm/i915/intel_sdvo.c
@@ -2697,6 +2697,7 @@ bool intel_sdvo_init(struct drm_device *dev, uint32_t sdvo_reg, bool is_sdvob)
 	struct drm_i915_private *dev_priv = dev->dev_private;
 	struct intel_encoder *intel_encoder;
 	struct intel_sdvo *intel_sdvo;
+	struct drm_connector *connector;
 	u32 hotplug_mask;
 	int i;
 
@@ -2749,8 +2750,16 @@ bool intel_sdvo_init(struct drm_device *dev, uint32_t sdvo_reg, bool is_sdvob)
 	/* Only enable the hotplug irq if we need it, to work around noisy
 	 * hotplug lines.
 	 */
-	if (intel_sdvo->hotplug_active)
+	if (intel_sdvo->hotplug_active) {
 		dev_priv->hotplug_supported_mask |= hotplug_mask;
+		list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
+			struct intel_connector *intel_connector = to_intel_connector(connector);
+			if (intel_connector->encoder == intel_encoder) {
+				intel_connector->hpd_status_bit = hotplug_mask;
+				break;
+			}
+		}
+	}
 
 	intel_sdvo_select_ddc_bus(dev_priv, intel_sdvo, sdvo_reg);
 
-- 
1.7.7

  parent reply	other threads:[~2013-01-10 15:04 UTC|newest]

Thread overview: 54+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-01-10 15:02 [PATCH 0/8] Detect and deal with Interrupt 'Storms' from noisy Hotplug Lines Egbert Eich
2013-01-10 15:02 ` [PATCH 1/8] drm/i915: Remove pch_rq_mask from struct drm_i915_private Egbert Eich
2013-01-11 20:13   ` Daniel Vetter
2013-01-10 15:02 ` [PATCH 2/8] drm/i915: Set hotplug_supported_flag for all chipset generations Egbert Eich
2013-03-26 19:51   ` Jesse Barnes
2013-01-10 15:02 ` Egbert Eich [this message]
2013-03-26 19:53   ` [PATCH 3/8] drm/i915: Add hpd status bit to struct intel_connector Jesse Barnes
2013-01-10 15:02 ` [PATCH 4/8] drm/i915: Add Hotplug IRQ Storm detection Egbert Eich
2013-03-26 19:59   ` Jesse Barnes
2013-01-10 15:02 ` [PATCH 5/8] drm/i915: Move hotplug interrupt enable for i915/i965/valleyview into a separate function Egbert Eich
2013-03-26 20:04   ` Jesse Barnes
2013-01-10 15:02 ` [PATCH 6/8] drm/i915: Only enable hotplug irq when needed on Ironlake and later chips Egbert Eich
2013-01-10 15:02 ` [PATCH 7/8] drm/i915: When detecting a hotplug IRQ storm disable respective IRQs Egbert Eich
2013-01-10 15:02 ` [PATCH 8/8] drm/i915: Add Reenable Timer to turn Hotplug Detection back on Egbert Eich
2013-01-11 20:34 ` [PATCH 0/8] Detect and deal with Interrupt 'Storms' from noisy Hotplug Lines Daniel Vetter
2013-01-17 14:01   ` Egbert Eich
2013-01-17 14:45     ` Daniel Vetter
2013-01-22 13:22       ` Egbert Eich
2013-01-22 13:48         ` Daniel Vetter
2013-01-22 15:11           ` Egbert Eich
2013-02-25 17:06           ` [PATCH v.2 00/12] " Egbert Eich
2013-02-25 17:06             ` [PATCH v.2 01/12] DRM/i915: Remove valleyview_hpd_irq_setup Egbert Eich
2013-03-26 20:06               ` Jesse Barnes
2013-02-25 17:06             ` [PATCH v.2 02/12] DRM/I915: Add enum hpd_pin to intel_encoder Egbert Eich
2013-03-26 20:07               ` Jesse Barnes
2013-02-25 17:06             ` [PATCH v.2 03/12] DRM/i915: Convert HPD interrupts to make use of HPD pin assignment in encoders Egbert Eich
2013-02-28  0:12               ` Chris Wilson
2013-02-28  9:17                 ` [PATCH v.2 03/12] DRM/i915: Convert HPD interrupts to make use of HPD pin assignment in encoders (v2) Egbert Eich
2013-03-26 20:08               ` [PATCH v.2 03/12] DRM/i915: Convert HPD interrupts to make use of HPD pin assignment in encoders Jesse Barnes
2013-02-25 17:06             ` [PATCH v.2 04/12] DRM/i915: Remove i965_hpd_irq_setup Egbert Eich
2013-02-25 17:06             ` [PATCH v.2 05/12] DRM/i915: Get rid if the 'hotplug_supported_mask' in struct drm_i915_private Egbert Eich
2013-03-26 21:06               ` Daniel Vetter
2013-03-27 15:08                 ` Egbert Eich
2013-02-25 17:06             ` [PATCH v.2 06/12] DRM/i915: Add HPD IRQ storm detection Egbert Eich
2013-02-28  0:30               ` Chris Wilson
2013-02-28  9:19                 ` [PATCH v.2 06/12] DRM/i915: Add HPD IRQ storm detection (v2) Egbert Eich
2013-03-03 18:07                   ` Daniel Vetter
2013-03-05  7:38                     ` [PATCH v.3 06/12] DRM/i915: Add HPD IRQ storm detection (v3) Egbert Eich
2013-03-05  7:48                       ` [PATCH v.2 10/12] DRM/i915: Add Reenable Timer to turn Hotplug Detection back on (v2) Egbert Eich
2013-03-05 10:28                         ` Ville Syrjälä
2013-03-05 12:26                           ` [PATCH v.3 10/12] DRM/i915: Add Reenable Timer to turn Hotplug Detection back on (v3) Egbert Eich
2013-03-05  7:55                       ` [PATCH v.2 11/12] DRM/i915: Add bit field to record which pins have received HPD events (v2) Egbert Eich
2013-03-05 13:00                         ` [PATCH v.3 11/12] DRM/i915: Add bit field to record which pins have received HPD events (v3) Egbert Eich
2013-03-05 14:52                           ` Egbert Eich
2013-02-25 17:06             ` [PATCH v.2 07/12] DRM/i915: (re)init HPD interrupt storm statistics Egbert Eich
2013-02-25 17:06             ` [PATCH v.2 08/12] DRM/i915: Treat hpd_irq_setup() for ironake and older generations the same way Egbert Eich
2013-02-25 17:06             ` [PATCH v.2 09/12] DRM/i915: Disable HPD interrupt on pin when irq storm is detected Egbert Eich
2013-03-05 12:34               ` [PATCH v.2 09/12] DRM/i915: Disable HPD interrupt on pin when irq storm is detected (v2) Egbert Eich
2013-02-25 17:06             ` [PATCH v.2 10/12] DRM/i915: Add Reenable Timer to turn Hotplug Detection back on Egbert Eich
2013-03-27 15:12               ` Daniel Vetter
2013-02-25 17:06             ` [PATCH v.2 11/12] DRM/i915: Add bit field to record which pins have received HPD events Egbert Eich
2013-02-25 17:06             ` [PATCH v.2 12/12] DRM/i915: Only reprobe display on encoder which has received an HPD event Egbert Eich
2013-03-05 14:18               ` [PATCH v.3 " Egbert Eich
2013-02-28  0:46             ` [PATCH v.2 00/12] Detect and deal with Interrupt 'Storms' from noisy Hotplug Lines Chris Wilson

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1357830166-18049-4-git-send-email-eich@suse.de \
    --to=eich@suse.de \
    --cc=chris.wilson@intel.com \
    --cc=daniel.vetter@intel.com \
    --cc=intel-gfx@lists.freedesktop.org \
    --cc=rodrigo.vivi@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox