From: Egbert Eich <eich@suse.de>
To: intel-gfx@lists.freedesktop.org
Cc: Egbert Eich <eich@suse.de>, Chris Wilson <chris.wilson@intel.com>,
Rodrigo Vivi <rodrigo.vivi@intel.com>
Subject: [PATCH v.2 03/12] DRM/i915: Convert HPD interrupts to make use of HPD pin assignment in encoders.
Date: Mon, 25 Feb 2013 12:06:50 -0500 [thread overview]
Message-ID: <1361812019-20099-4-git-send-email-eich@suse.de> (raw)
In-Reply-To: <1361812019-20099-1-git-send-email-eich@suse.de>
This allows to enable HPD interrupts for individual pins to only receive
hotplug events from lines which are connected and working.
Signed-off-by: Egbert Eich <eich@suse.de>
---
drivers/gpu/drm/i915/i915_irq.c | 160 ++++++++++++++++++++++++--------------
drivers/gpu/drm/i915/i915_reg.h | 32 ++++++++-
2 files changed, 132 insertions(+), 60 deletions(-)
diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c
index 5fd3267..306cd79 100644
--- a/drivers/gpu/drm/i915/i915_irq.c
+++ b/drivers/gpu/drm/i915/i915_irq.c
@@ -36,6 +36,68 @@
#include "i915_trace.h"
#include "intel_drv.h"
+static const u32 hpd_ibx[] = {
+ 0, /* HPD_NONE */
+ SDE_CRT_HOTPLUG, /* HPD_CRT */
+ SDE_SDVOB_HOTPLUG, /* HPD_SDVO_B */
+ 0, /* HPD_SDVO_C */
+ SDE_PORTB_HOTPLUG, /* HPD_PORT_B */
+ SDE_PORTC_HOTPLUG, /* HPD_PORT_C */
+ SDE_PORTD_HOTPLUG /* HPD_PORT_D */
+};
+
+static const u32 hpd_cpt[] = {
+ 0, /* HPD_NONE */
+ SDE_CRT_HOTPLUG_CPT, /* HPD_CRT */
+ 0, /* HPD_SDVO_B */
+ 0, /* HPD_SDVO_C */
+ SDE_PORTB_HOTPLUG_CPT, /* HPD_PORT_B */
+ SDE_PORTC_HOTPLUG_CPT, /* HPD_PORT_C */
+ SDE_PORTD_HOTPLUG_CPT /* HPD_PORT_D */
+};
+
+static const u32 hpd_mask_i915[] = {
+ 0, /* HPD_NONE */
+ CRT_HOTPLUG_INT_EN, /* HPD_CRT */
+ SDVOB_HOTPLUG_INT_EN, /* HPD_SDVO_B */
+ SDVOC_HOTPLUG_INT_EN, /* HPD_SDVO_C */
+ PORTB_HOTPLUG_INT_EN, /* HPD_PORT_B */
+ PORTC_HOTPLUG_INT_EN, /* HPD_PORT_C */
+ PORTD_HOTPLUG_INT_EN /* HPD_PORT_D */
+};
+
+static const u32 hpd_status_gen4[] = {
+ 0, /* HPD_NONE */
+ CRT_HOTPLUG_INT_STATUS, /* HPD_CRT */
+ SDVOB_HOTPLUG_INT_STATUS_G4X, /* HPD_SDVO_B */
+ SDVOC_HOTPLUG_INT_STATUS_G4X, /* HPD_SDVO_C */
+ PORTB_HOTPLUG_INT_STATUS, /* HPD_PORT_B */
+ PORTC_HOTPLUG_INT_STATUS, /* HPD_PORT_C */
+ PORTD_HOTPLUG_INT_STATUS /* HPD_PORT_D */
+};
+
+static const u32 hpd_status_i965[] = {
+ 0, /* HPD_NONE */
+ CRT_HOTPLUG_INT_STATUS, /* HPD_CRT */
+ SDVOB_HOTPLUG_INT_STATUS_I965, /* HPD_SDVO_B */
+ SDVOC_HOTPLUG_INT_STATUS_I965, /* HPD_SDVO_C */
+ PORTB_HOTPLUG_INT_STATUS, /* HPD_PORT_B */
+ PORTC_HOTPLUG_INT_STATUS, /* HPD_PORT_C */
+ PORTD_HOTPLUG_INT_STATUS /* HPD_PORT_D */
+};
+
+static const u32 hpd_status_i915[] = { /* i915 and valleyview are the same */
+ 0, /* HPD_NONE */
+ CRT_HOTPLUG_INT_STATUS, /* HPD_CRT */
+ SDVOB_HOTPLUG_INT_STATUS_I915, /* HPD_SDVO_B */
+ SDVOC_HOTPLUG_INT_STATUS_I915, /* HPD_SDVO_C */
+ PORTB_HOTPLUG_INT_STATUS, /* HPD_PORT_B */
+ PORTC_HOTPLUG_INT_STATUS, /* HPD_PORT_C */
+ PORTD_HOTPLUG_INT_STATUS /* HPD_PORT_D */
+};
+
+
+
/* For display hotplug interrupt */
static void
ironlake_enable_display_irq(drm_i915_private_t *dev_priv, u32 mask)
@@ -596,7 +658,7 @@ static irqreturn_t valleyview_irq_handler(int irq, void *arg)
DRM_DEBUG_DRIVER("hotplug event received, stat 0x%08x\n",
hotplug_status);
- if (hotplug_status & dev_priv->hotplug_supported_mask)
+ if (hotplug_status & HOTPLUG_INT_STATUS_I915)
queue_work(dev_priv->wq,
&dev_priv->hotplug_work);
@@ -1940,17 +2002,21 @@ static void ibx_enable_hotplug(struct drm_device *dev)
static void ibx_irq_postinstall(struct drm_device *dev)
{
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
- u32 mask;
-
- if (HAS_PCH_IBX(dev))
- mask = SDE_HOTPLUG_MASK |
- SDE_GMBUS |
- SDE_AUX_MASK;
- else
- mask = SDE_HOTPLUG_MASK_CPT |
- SDE_GMBUS_CPT |
- SDE_AUX_MASK_CPT;
+ struct drm_mode_config *mode_config = &dev->mode_config;
+ struct intel_encoder *intel_encoder;
+ u32 mask = I915_READ(SDEIER);
+ if (HAS_PCH_IBX(dev)) {
+ mask &= ~SDE_HOTPLUG_MASK;
+ list_for_each_entry(intel_encoder, &mode_config->encoder_list, base.head)
+ mask |= hpd_ibx[intel_encoder->hpd_pin];
+ mask |= SDE_GMBUS | SDE_AUX_MASK;
+ } else {
+ mask &= ~SDE_HOTPLUG_MASK_CPT;
+ list_for_each_entry(intel_encoder, &mode_config->encoder_list, base.head)
+ mask |= hpd_cpt[intel_encoder->hpd_pin];
+ mask |= SDE_GMBUS_CPT | SDE_AUX_MASK_CPT;
+ }
I915_WRITE(SDEIIR, I915_READ(SDEIIR));
I915_WRITE(SDEIMR, ~mask);
I915_WRITE(SDEIER, mask);
@@ -2360,26 +2426,16 @@ static int i915_irq_postinstall(struct drm_device *dev)
static void i915_hpd_irq_setup(struct drm_device *dev)
{
- drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
- u32 hotplug_en;
-
if (I915_HAS_HOTPLUG(dev)) {
- hotplug_en = I915_READ(PORT_HOTPLUG_EN);
+ drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
+ struct drm_mode_config *mode_config = &dev->mode_config;
+ struct intel_encoder *encoder;
+ u32 hotplug_en = I915_READ(PORT_HOTPLUG_EN);
- if (dev_priv->hotplug_supported_mask & PORTB_HOTPLUG_INT_STATUS)
- hotplug_en |= PORTB_HOTPLUG_INT_EN;
- if (dev_priv->hotplug_supported_mask & PORTC_HOTPLUG_INT_STATUS)
- hotplug_en |= PORTC_HOTPLUG_INT_EN;
- if (dev_priv->hotplug_supported_mask & PORTD_HOTPLUG_INT_STATUS)
- hotplug_en |= PORTD_HOTPLUG_INT_EN;
- if (dev_priv->hotplug_supported_mask & SDVOC_HOTPLUG_INT_STATUS_I915)
- hotplug_en |= SDVOC_HOTPLUG_INT_EN;
- if (dev_priv->hotplug_supported_mask & SDVOB_HOTPLUG_INT_STATUS_I915)
- hotplug_en |= SDVOB_HOTPLUG_INT_EN;
- if (dev_priv->hotplug_supported_mask & CRT_HOTPLUG_INT_STATUS) {
- hotplug_en |= CRT_HOTPLUG_INT_EN;
- hotplug_en |= CRT_HOTPLUG_VOLTAGE_COMPARE_50;
- }
+ hotplug_en &= ~HOTPLUG_INT_EN_MASK;
+ list_for_each_entry(encoder, &mode_config->encoder_list, base.head)
+ hotplug_en |= hpd_mask_i915[encoder->hpd_pin];
+ hotplug_en |= CRT_HOTPLUG_VOLTAGE_COMPARE_50;
/* Ignore TV since it's buggy */
@@ -2443,7 +2499,7 @@ static irqreturn_t i915_irq_handler(int irq, void *arg)
DRM_DEBUG_DRIVER("hotplug event received, stat 0x%08x\n",
hotplug_status);
- if (hotplug_status & dev_priv->hotplug_supported_mask)
+ if (hotplug_status & HOTPLUG_INT_STATUS_I915)
queue_work(dev_priv->wq,
&dev_priv->hotplug_work);
@@ -2596,38 +2652,22 @@ static int i965_irq_postinstall(struct drm_device *dev)
static void i965_hpd_irq_setup(struct drm_device *dev)
{
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
+ struct drm_mode_config *mode_config = &dev->mode_config;
+ struct intel_encoder *encoder;
u32 hotplug_en;
/* Note HDMI and DP share hotplug bits */
hotplug_en = 0;
- if (dev_priv->hotplug_supported_mask & PORTB_HOTPLUG_INT_STATUS)
- hotplug_en |= PORTB_HOTPLUG_INT_EN;
- if (dev_priv->hotplug_supported_mask & PORTC_HOTPLUG_INT_STATUS)
- hotplug_en |= PORTC_HOTPLUG_INT_EN;
- if (dev_priv->hotplug_supported_mask & PORTD_HOTPLUG_INT_STATUS)
- hotplug_en |= PORTD_HOTPLUG_INT_EN;
- if (IS_G4X(dev)) {
- if (dev_priv->hotplug_supported_mask & SDVOC_HOTPLUG_INT_STATUS_G4X)
- hotplug_en |= SDVOC_HOTPLUG_INT_EN;
- if (dev_priv->hotplug_supported_mask & SDVOB_HOTPLUG_INT_STATUS_G4X)
- hotplug_en |= SDVOB_HOTPLUG_INT_EN;
- } else {
- if (dev_priv->hotplug_supported_mask & SDVOC_HOTPLUG_INT_STATUS_I965)
- hotplug_en |= SDVOC_HOTPLUG_INT_EN;
- if (dev_priv->hotplug_supported_mask & SDVOB_HOTPLUG_INT_STATUS_I965)
- hotplug_en |= SDVOB_HOTPLUG_INT_EN;
- }
- if (dev_priv->hotplug_supported_mask & CRT_HOTPLUG_INT_STATUS) {
- hotplug_en |= CRT_HOTPLUG_INT_EN;
-
- /* Programming the CRT detection parameters tends
- to generate a spurious hotplug event about three
- seconds later. So just do it once.
- */
- if (IS_G4X(dev))
- hotplug_en |= CRT_HOTPLUG_ACTIVATION_PERIOD_64;
- hotplug_en |= CRT_HOTPLUG_VOLTAGE_COMPARE_50;
- }
+ list_for_each_entry(encoder, &mode_config->encoder_list, base.head)
+ /* enable bits are the same for all generations */
+ hotplug_en |= hpd_mask_i915[encoder->hpd_pin];
+ /* Programming the CRT detection parameters tends
+ to generate a spurious hotplug event about three
+ seconds later. So just do it once.
+ */
+ if (IS_G4X(dev))
+ hotplug_en |= CRT_HOTPLUG_ACTIVATION_PERIOD_64;
+ hotplug_en |= CRT_HOTPLUG_VOLTAGE_COMPARE_50;
/* Ignore TV since it's buggy */
@@ -2690,7 +2730,9 @@ static irqreturn_t i965_irq_handler(int irq, void *arg)
DRM_DEBUG_DRIVER("hotplug event received, stat 0x%08x\n",
hotplug_status);
- if (hotplug_status & dev_priv->hotplug_supported_mask)
+ if (hotplug_status & (IS_G4X(dev) ?
+ HOTPLUG_INT_STATUS_G4X :
+ HOTPLUG_INT_STATUS_I965))
queue_work(dev_priv->wq,
&dev_priv->hotplug_work);
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index 527b664..c3d2c01 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -1637,6 +1637,12 @@
#define SDVOC_HOTPLUG_INT_EN (1 << 25)
#define TV_HOTPLUG_INT_EN (1 << 18)
#define CRT_HOTPLUG_INT_EN (1 << 9)
+#define HOTPLUG_INT_EN_MASK (PORTB_HOTPLUG_INT_EN | \
+ PORTC_HOTPLUG_INT_EN | \
+ PORTD_HOTPLUG_INT_EN | \
+ SDVOC_HOTPLUG_INT_EN | \
+ SDVOB_HOTPLUG_INT_EN | \
+ CRT_HOTPLUG_INT_EN)
#define CRT_HOTPLUG_FORCE_DETECT (1 << 3)
#define CRT_HOTPLUG_ACTIVATION_PERIOD_32 (0 << 8)
/* must use period 64 on GM45 according to docs */
@@ -1675,6 +1681,26 @@
#define SDVOB_HOTPLUG_INT_STATUS_I965 (3 << 2)
#define SDVOC_HOTPLUG_INT_STATUS_I915 (1 << 7)
#define SDVOB_HOTPLUG_INT_STATUS_I915 (1 << 6)
+#define HOTPLUG_INT_STATUS_G4X (CRT_HOTPLUG_INT_STATUS | \
+ SDVOB_HOTPLUG_INT_STATUS_G4X | \
+ SDVOC_HOTPLUG_INT_STATUS_G4X | \
+ PORTB_HOTPLUG_INT_STATUS | \
+ PORTC_HOTPLUG_INT_STATUS | \
+ PORTD_HOTPLUG_INT_STATUS)
+
+#define HOTPLUG_INT_STATUS_I965 (CRT_HOTPLUG_INT_STATUS | \
+ SDVOB_HOTPLUG_INT_STATUS_I965 | \
+ SDVOC_HOTPLUG_INT_STATUS_I965 | \
+ PORTB_HOTPLUG_INT_STATUS | \
+ PORTC_HOTPLUG_INT_STATUS | \
+ PORTD_HOTPLUG_INT_STATUS)
+
+#define HOTPLUG_INT_STATUS_I915 (CRT_HOTPLUG_INT_STATUS | \
+ SDVOB_HOTPLUG_INT_STATUS_I915 | \
+ SDVOC_HOTPLUG_INT_STATUS_I915 | \
+ PORTB_HOTPLUG_INT_STATUS | \
+ PORTC_HOTPLUG_INT_STATUS | \
+ PORTD_HOTPLUG_INT_STATUS)
/* SDVO port control */
#define SDVOB 0x61140
@@ -3508,7 +3534,11 @@
#define SDE_PORTC_HOTPLUG (1 << 9)
#define SDE_PORTB_HOTPLUG (1 << 8)
#define SDE_SDVOB_HOTPLUG (1 << 6)
-#define SDE_HOTPLUG_MASK (0xf << 8)
+#define SDE_HOTPLUG_MASK (SDE_CRT_HOTPLUG | \
+ SDE_SDVOB_HOTPLUG | \
+ SDE_PORTB_HOTPLUG | \
+ SDE_PORTC_HOTPLUG | \
+ SDE_PORTD_HOTPLUG)
#define SDE_TRANSB_CRC_DONE (1 << 5)
#define SDE_TRANSB_CRC_ERR (1 << 4)
#define SDE_TRANSB_FIFO_UNDER (1 << 3)
--
1.7.7
next prev parent reply other threads:[~2013-02-25 18:06 UTC|newest]
Thread overview: 54+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-01-10 15:02 [PATCH 0/8] Detect and deal with Interrupt 'Storms' from noisy Hotplug Lines Egbert Eich
2013-01-10 15:02 ` [PATCH 1/8] drm/i915: Remove pch_rq_mask from struct drm_i915_private Egbert Eich
2013-01-11 20:13 ` Daniel Vetter
2013-01-10 15:02 ` [PATCH 2/8] drm/i915: Set hotplug_supported_flag for all chipset generations Egbert Eich
2013-03-26 19:51 ` Jesse Barnes
2013-01-10 15:02 ` [PATCH 3/8] drm/i915: Add hpd status bit to struct intel_connector Egbert Eich
2013-03-26 19:53 ` Jesse Barnes
2013-01-10 15:02 ` [PATCH 4/8] drm/i915: Add Hotplug IRQ Storm detection Egbert Eich
2013-03-26 19:59 ` Jesse Barnes
2013-01-10 15:02 ` [PATCH 5/8] drm/i915: Move hotplug interrupt enable for i915/i965/valleyview into a separate function Egbert Eich
2013-03-26 20:04 ` Jesse Barnes
2013-01-10 15:02 ` [PATCH 6/8] drm/i915: Only enable hotplug irq when needed on Ironlake and later chips Egbert Eich
2013-01-10 15:02 ` [PATCH 7/8] drm/i915: When detecting a hotplug IRQ storm disable respective IRQs Egbert Eich
2013-01-10 15:02 ` [PATCH 8/8] drm/i915: Add Reenable Timer to turn Hotplug Detection back on Egbert Eich
2013-01-11 20:34 ` [PATCH 0/8] Detect and deal with Interrupt 'Storms' from noisy Hotplug Lines Daniel Vetter
2013-01-17 14:01 ` Egbert Eich
2013-01-17 14:45 ` Daniel Vetter
2013-01-22 13:22 ` Egbert Eich
2013-01-22 13:48 ` Daniel Vetter
2013-01-22 15:11 ` Egbert Eich
2013-02-25 17:06 ` [PATCH v.2 00/12] " Egbert Eich
2013-02-25 17:06 ` [PATCH v.2 01/12] DRM/i915: Remove valleyview_hpd_irq_setup Egbert Eich
2013-03-26 20:06 ` Jesse Barnes
2013-02-25 17:06 ` [PATCH v.2 02/12] DRM/I915: Add enum hpd_pin to intel_encoder Egbert Eich
2013-03-26 20:07 ` Jesse Barnes
2013-02-25 17:06 ` Egbert Eich [this message]
2013-02-28 0:12 ` [PATCH v.2 03/12] DRM/i915: Convert HPD interrupts to make use of HPD pin assignment in encoders Chris Wilson
2013-02-28 9:17 ` [PATCH v.2 03/12] DRM/i915: Convert HPD interrupts to make use of HPD pin assignment in encoders (v2) Egbert Eich
2013-03-26 20:08 ` [PATCH v.2 03/12] DRM/i915: Convert HPD interrupts to make use of HPD pin assignment in encoders Jesse Barnes
2013-02-25 17:06 ` [PATCH v.2 04/12] DRM/i915: Remove i965_hpd_irq_setup Egbert Eich
2013-02-25 17:06 ` [PATCH v.2 05/12] DRM/i915: Get rid if the 'hotplug_supported_mask' in struct drm_i915_private Egbert Eich
2013-03-26 21:06 ` Daniel Vetter
2013-03-27 15:08 ` Egbert Eich
2013-02-25 17:06 ` [PATCH v.2 06/12] DRM/i915: Add HPD IRQ storm detection Egbert Eich
2013-02-28 0:30 ` Chris Wilson
2013-02-28 9:19 ` [PATCH v.2 06/12] DRM/i915: Add HPD IRQ storm detection (v2) Egbert Eich
2013-03-03 18:07 ` Daniel Vetter
2013-03-05 7:38 ` [PATCH v.3 06/12] DRM/i915: Add HPD IRQ storm detection (v3) Egbert Eich
2013-03-05 7:48 ` [PATCH v.2 10/12] DRM/i915: Add Reenable Timer to turn Hotplug Detection back on (v2) Egbert Eich
2013-03-05 10:28 ` Ville Syrjälä
2013-03-05 12:26 ` [PATCH v.3 10/12] DRM/i915: Add Reenable Timer to turn Hotplug Detection back on (v3) Egbert Eich
2013-03-05 7:55 ` [PATCH v.2 11/12] DRM/i915: Add bit field to record which pins have received HPD events (v2) Egbert Eich
2013-03-05 13:00 ` [PATCH v.3 11/12] DRM/i915: Add bit field to record which pins have received HPD events (v3) Egbert Eich
2013-03-05 14:52 ` Egbert Eich
2013-02-25 17:06 ` [PATCH v.2 07/12] DRM/i915: (re)init HPD interrupt storm statistics Egbert Eich
2013-02-25 17:06 ` [PATCH v.2 08/12] DRM/i915: Treat hpd_irq_setup() for ironake and older generations the same way Egbert Eich
2013-02-25 17:06 ` [PATCH v.2 09/12] DRM/i915: Disable HPD interrupt on pin when irq storm is detected Egbert Eich
2013-03-05 12:34 ` [PATCH v.2 09/12] DRM/i915: Disable HPD interrupt on pin when irq storm is detected (v2) Egbert Eich
2013-02-25 17:06 ` [PATCH v.2 10/12] DRM/i915: Add Reenable Timer to turn Hotplug Detection back on Egbert Eich
2013-03-27 15:12 ` Daniel Vetter
2013-02-25 17:06 ` [PATCH v.2 11/12] DRM/i915: Add bit field to record which pins have received HPD events Egbert Eich
2013-02-25 17:06 ` [PATCH v.2 12/12] DRM/i915: Only reprobe display on encoder which has received an HPD event Egbert Eich
2013-03-05 14:18 ` [PATCH v.3 " Egbert Eich
2013-02-28 0:46 ` [PATCH v.2 00/12] Detect and deal with Interrupt 'Storms' from noisy Hotplug Lines Chris Wilson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1361812019-20099-4-git-send-email-eich@suse.de \
--to=eich@suse.de \
--cc=chris.wilson@intel.com \
--cc=intel-gfx@lists.freedesktop.org \
--cc=rodrigo.vivi@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox