From: Daniel Vetter <daniel.vetter@ffwll.ch>
To: Intel Graphics Development <intel-gfx@lists.freedesktop.org>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Subject: [PATCH 01/19] drm/i915: introduce struct intel_crtc_config
Date: Wed, 13 Feb 2013 12:32:04 +0100 [thread overview]
Message-ID: <1360755142-19145-2-git-send-email-daniel.vetter@ffwll.ch> (raw)
In-Reply-To: <1360755142-19145-1-git-send-email-daniel.vetter@ffwll.ch>
Currently only containing the requested and the adjusted mode. And
only crtc callbacks are converted somewhat to it, encoders will be
done on a as-needed basis (simply too much churn in one patch
otherwise).
Future patches will add tons more useful stuff to this struct,
starting with the very simple.
v2: Store the pipe_config in the intel_crtc, so that the ->mode-set,
->enable and also ->disable have easy access to it.
v3: Store the pipe config in the right crtc ...
v4: Rebased.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
---
drivers/gpu/drm/i915/i915_drv.h | 4 +-
drivers/gpu/drm/i915/intel_display.c | 81 +++++++++++++++++++++---------------
drivers/gpu/drm/i915/intel_drv.h | 7 ++++
3 files changed, 56 insertions(+), 36 deletions(-)
diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index 0f1d15b..1196d0e 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -271,6 +271,8 @@ struct drm_i915_error_state {
struct intel_display_error_state *display;
};
+struct intel_crtc_config;
+
struct drm_i915_display_funcs {
bool (*fbc_enabled)(struct drm_device *dev);
void (*enable_fbc)(struct drm_crtc *crtc, unsigned long interval);
@@ -284,8 +286,6 @@ struct drm_i915_display_funcs {
struct drm_display_mode *mode);
void (*modeset_global_resources)(struct drm_device *dev);
int (*crtc_mode_set)(struct drm_crtc *crtc,
- struct drm_display_mode *mode,
- struct drm_display_mode *adjusted_mode,
int x, int y,
struct drm_framebuffer *old_fb);
void (*crtc_enable)(struct drm_crtc *crtc);
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 6fe4d07..c79424e 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -3881,15 +3881,15 @@ bool intel_connector_get_hw_state(struct intel_connector *connector)
return encoder->get_hw_state(encoder, &pipe);
}
-static bool intel_crtc_mode_fixup(struct drm_crtc *crtc,
- const struct drm_display_mode *mode,
- struct drm_display_mode *adjusted_mode)
+static bool intel_crtc_compute_config(struct drm_crtc *crtc,
+ struct intel_crtc_config *pipe_config)
{
struct drm_device *dev = crtc->dev;
+ struct drm_display_mode *adjusted_mode = &pipe_config->adjusted_mode;
if (HAS_PCH_SPLIT(dev)) {
/* FDI link clock is fixed at 2.7G */
- if (mode->clock * 3 > IRONLAKE_FDI_FREQ * 4)
+ if (pipe_config->requested_mode.clock * 3 > IRONLAKE_FDI_FREQ * 4)
return false;
}
@@ -4579,14 +4579,15 @@ static void intel_set_pipe_timings(struct intel_crtc *intel_crtc,
}
static int i9xx_crtc_mode_set(struct drm_crtc *crtc,
- struct drm_display_mode *mode,
- struct drm_display_mode *adjusted_mode,
int x, int y,
struct drm_framebuffer *fb)
{
struct drm_device *dev = crtc->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+ struct drm_display_mode *adjusted_mode =
+ &intel_crtc->config.adjusted_mode;
+ struct drm_display_mode *mode = &intel_crtc->config.requested_mode;
int pipe = intel_crtc->pipe;
int plane = intel_crtc->plane;
int refclk, num_connectors = 0;
@@ -5484,14 +5485,15 @@ static uint32_t ironlake_compute_dpll(struct intel_crtc *intel_crtc,
}
static int ironlake_crtc_mode_set(struct drm_crtc *crtc,
- struct drm_display_mode *mode,
- struct drm_display_mode *adjusted_mode,
int x, int y,
struct drm_framebuffer *fb)
{
struct drm_device *dev = crtc->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+ struct drm_display_mode *adjusted_mode =
+ &intel_crtc->config.adjusted_mode;
+ struct drm_display_mode *mode = &intel_crtc->config.requested_mode;
int pipe = intel_crtc->pipe;
int plane = intel_crtc->plane;
int num_connectors = 0;
@@ -5650,14 +5652,15 @@ static void haswell_modeset_global_resources(struct drm_device *dev)
}
static int haswell_crtc_mode_set(struct drm_crtc *crtc,
- struct drm_display_mode *mode,
- struct drm_display_mode *adjusted_mode,
int x, int y,
struct drm_framebuffer *fb)
{
struct drm_device *dev = crtc->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+ struct drm_display_mode *adjusted_mode =
+ &intel_crtc->config.adjusted_mode;
+ struct drm_display_mode *mode = &intel_crtc->config.requested_mode;
int pipe = intel_crtc->pipe;
int plane = intel_crtc->plane;
int num_connectors = 0;
@@ -5732,8 +5735,6 @@ static int haswell_crtc_mode_set(struct drm_crtc *crtc,
}
static int intel_crtc_mode_set(struct drm_crtc *crtc,
- struct drm_display_mode *mode,
- struct drm_display_mode *adjusted_mode,
int x, int y,
struct drm_framebuffer *fb)
{
@@ -5742,6 +5743,9 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc,
struct drm_encoder_helper_funcs *encoder_funcs;
struct intel_encoder *encoder;
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+ struct drm_display_mode *adjusted_mode =
+ &intel_crtc->config.adjusted_mode;
+ struct drm_display_mode *mode = &intel_crtc->config.requested_mode;
int pipe = intel_crtc->pipe;
int ret;
@@ -5752,8 +5756,8 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc,
drm_vblank_pre_modeset(dev, pipe);
- ret = dev_priv->display.crtc_mode_set(crtc, mode, adjusted_mode,
- x, y, fb);
+ ret = dev_priv->display.crtc_mode_set(crtc, x, y, fb);
+
drm_vblank_post_modeset(dev, pipe);
if (ret != 0)
@@ -7382,19 +7386,24 @@ static void intel_modeset_commit_output_state(struct drm_device *dev)
}
}
-static struct drm_display_mode *
-intel_modeset_adjusted_mode(struct drm_crtc *crtc,
- struct drm_display_mode *mode)
+static struct intel_crtc_config *
+intel_modeset_pipe_config(struct drm_crtc *crtc,
+ struct drm_display_mode *mode)
{
struct drm_device *dev = crtc->dev;
- struct drm_display_mode *adjusted_mode;
struct drm_encoder_helper_funcs *encoder_funcs;
struct intel_encoder *encoder;
+ struct intel_crtc_config *pipe_config;
- adjusted_mode = drm_mode_duplicate(dev, mode);
- if (!adjusted_mode)
+ pipe_config = kzalloc(sizeof(*pipe_config), GFP_KERNEL);
+ if (!pipe_config)
return ERR_PTR(-ENOMEM);
+ pipe_config->adjusted_mode = *mode;
+ pipe_config->adjusted_mode.base.id = 0;
+ pipe_config->requested_mode = *mode;
+ pipe_config->requested_mode.base.id = 0;
+
/* Pass our mode to the connectors and the CRTC to give them a chance to
* adjust it according to limitations or connector properties, and also
* a chance to reject the mode entirely.
@@ -7405,22 +7414,23 @@ intel_modeset_adjusted_mode(struct drm_crtc *crtc,
if (&encoder->new_crtc->base != crtc)
continue;
encoder_funcs = encoder->base.helper_private;
- if (!(encoder_funcs->mode_fixup(&encoder->base, mode,
- adjusted_mode))) {
+ if (!(encoder_funcs->mode_fixup(&encoder->base,
+ &pipe_config->requested_mode,
+ &pipe_config->adjusted_mode))) {
DRM_DEBUG_KMS("Encoder fixup failed\n");
goto fail;
}
}
- if (!(intel_crtc_mode_fixup(crtc, mode, adjusted_mode))) {
+ if (!(intel_crtc_compute_config(crtc, pipe_config))) {
DRM_DEBUG_KMS("CRTC fixup failed\n");
goto fail;
}
DRM_DEBUG_KMS("[CRTC:%d]\n", crtc->base.id);
- return adjusted_mode;
+ return pipe_config;
fail:
- drm_mode_destroy(dev, adjusted_mode);
+ kfree(pipe_config);
return ERR_PTR(-EINVAL);
}
@@ -7686,7 +7696,8 @@ int intel_set_mode(struct drm_crtc *crtc,
{
struct drm_device *dev = crtc->dev;
drm_i915_private_t *dev_priv = dev->dev_private;
- struct drm_display_mode *adjusted_mode, *saved_mode, *saved_hwmode;
+ struct drm_display_mode *saved_mode, *saved_hwmode;
+ struct intel_crtc_config *pipe_config;
struct intel_crtc *intel_crtc;
unsigned disable_pipes, prepare_pipes, modeset_pipes;
int ret = 0;
@@ -7713,11 +7724,10 @@ int intel_set_mode(struct drm_crtc *crtc,
* Hence simply check whether any bit is set in modeset_pipes in all the
* pieces of code that are not yet converted to deal with mutliple crtcs
* changing their mode at the same time. */
- adjusted_mode = NULL;
+ pipe_config = NULL;
if (modeset_pipes) {
- adjusted_mode = intel_modeset_adjusted_mode(crtc, mode);
- if (IS_ERR(adjusted_mode)) {
- ret = PTR_ERR(adjusted_mode);
+ pipe_config = intel_modeset_pipe_config(crtc, mode);
+ if (IS_ERR(pipe_config)) {
goto out;
}
}
@@ -7730,8 +7740,12 @@ int intel_set_mode(struct drm_crtc *crtc,
/* crtc->mode is already used by the ->mode_set callbacks, hence we need
* to set it here already despite that we pass it down the callchain.
*/
- if (modeset_pipes)
+ if (modeset_pipes) {
crtc->mode = *mode;
+ /* mode_set/enable/disable functions rely on a correct pipe
+ * config. */
+ to_intel_crtc(crtc)->config = *pipe_config;
+ }
/* Only after disabling all output pipelines that will be changed can we
* update the the output configuration. */
@@ -7745,7 +7759,6 @@ int intel_set_mode(struct drm_crtc *crtc,
*/
for_each_intel_crtc_masked(dev, modeset_pipes, intel_crtc) {
ret = intel_crtc_mode_set(&intel_crtc->base,
- mode, adjusted_mode,
x, y, fb);
if (ret)
goto done;
@@ -7757,7 +7770,7 @@ int intel_set_mode(struct drm_crtc *crtc,
if (modeset_pipes) {
/* Store real post-adjustment hardware mode. */
- crtc->hwmode = *adjusted_mode;
+ crtc->hwmode = pipe_config->adjusted_mode;
/* Calculate and store various constants which
* are later needed by vblank and swap-completion
@@ -7768,7 +7781,6 @@ int intel_set_mode(struct drm_crtc *crtc,
/* FIXME: add subpixel order */
done:
- drm_mode_destroy(dev, adjusted_mode);
if (ret && crtc->enabled) {
crtc->hwmode = *saved_hwmode;
crtc->mode = *saved_mode;
@@ -7777,6 +7789,7 @@ done:
}
out:
+ kfree(pipe_config);
kfree(saved_mode);
return ret;
}
diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
index 13afb37..898fdfe 100644
--- a/drivers/gpu/drm/i915/intel_drv.h
+++ b/drivers/gpu/drm/i915/intel_drv.h
@@ -199,6 +199,11 @@ struct intel_connector {
struct edid *edid;
};
+struct intel_crtc_config {
+ struct drm_display_mode requested_mode;
+ struct drm_display_mode adjusted_mode;
+};
+
struct intel_crtc {
struct drm_crtc base;
enum pipe pipe;
@@ -232,6 +237,8 @@ struct intel_crtc {
bool cursor_visible;
unsigned int bpp;
+ struct intel_crtc_config config;
+
/* We can share PLLs across outputs if the timings match */
struct intel_pch_pll *pch_pll;
uint32_t ddi_pll_sel;
--
1.7.11.7
next prev parent reply other threads:[~2013-02-13 11:43 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-02-13 11:32 [PATCH 00/19] [RFC] introduce struct intel_pipe_config Daniel Vetter
2013-02-13 11:32 ` Daniel Vetter [this message]
2013-02-13 11:32 ` [PATCH 02/19] drm/i915: compute pipe_config earlier Daniel Vetter
2013-02-13 11:32 ` [PATCH 03/19] drm/i915: add pipe_config->timings_set Daniel Vetter
2013-02-13 11:32 ` [PATCH 04/19] drm/i915: add pipe_config->pixel_multiplier Daniel Vetter
2013-02-13 11:32 ` [PATCH 05/19] drm/i915: add pipe_config->has_pch_encoder Daniel Vetter
2013-02-13 11:32 ` [PATCH 06/19] drm/i915: clear up the fdi/dp set_m_n confusion Daniel Vetter
2013-02-13 11:32 ` [PATCH 07/19] drm/i915: move pipe bpp computation to pipe_config Daniel Vetter
2013-02-13 11:32 ` [PATCH 08/19] drm/i915: clean up plane bpp confusion Daniel Vetter
2013-02-13 11:32 ` [PATCH 09/19] drm/i915: clean up pipe " Daniel Vetter
2013-02-13 11:32 ` [PATCH 10/19] drm/i915: move dp_m_n computation to dp_encoder->compute_config Daniel Vetter
2013-02-13 11:32 ` [PATCH 11/19] drm/i915: track dp target_clock in pipe_config Daniel Vetter
2013-02-13 11:32 ` [PATCH 12/19] drm/i915: rip out superflous is_dp&is_cpu_edp tracking Daniel Vetter
2013-02-13 11:32 ` [PATCH 13/19] drm/i915: add hw state readout/checking for pipe_config Daniel Vetter
2013-02-13 11:32 ` [PATCH 14/19] drm/i915: hw readout support for ->has_pch_encoders Daniel Vetter
2013-02-13 11:32 ` [PATCH 15/19] drm/i915: gen2 has no tv out support Daniel Vetter
2013-02-13 11:32 ` [PATCH 16/19] drm/i915: create pipe_config->dpll for clock state Daniel Vetter
2013-02-13 11:32 ` [PATCH 17/19] drm/i915: move dp clock computations to encoder->compute_config Daniel Vetter
2013-02-13 11:32 ` [PATCH 18/19] drm/i915: add pipe_config->limited_color_range Daniel Vetter
2013-02-13 11:32 ` [PATCH 19/19] drm/i915: use pipe_config for lvds dithering Daniel Vetter
2013-02-13 14:03 ` [PATCH 00/19] [RFC] introduce struct intel_pipe_config Chris Wilson
2013-02-13 15:57 ` Daniel Vetter
2013-02-14 22:28 ` Jesse Barnes
2013-02-15 10:05 ` Daniel Vetter
2013-02-15 16:48 ` Jesse Barnes
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1360755142-19145-2-git-send-email-daniel.vetter@ffwll.ch \
--to=daniel.vetter@ffwll.ch \
--cc=intel-gfx@lists.freedesktop.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox