From: ville.syrjala@linux.intel.com
To: intel-gfx@lists.freedesktop.org
Subject: [PATCH i-g-t 3/3] tests/gem_tiling_max_stride: Add a test for max fence stride
Date: Tue, 9 Apr 2013 15:25:39 +0300 [thread overview]
Message-ID: <1365510339-10576-4-git-send-email-ville.syrjala@linux.intel.com> (raw)
In-Reply-To: <1365510339-10576-1-git-send-email-ville.syrjala@linux.intel.com>
From: Ville Syrjälä <ville.syrjala@linux.intel.com>
gem_tiling_max_stride writes a data pattern to an X-tiled buffer using
the maximum supported stride, reads the data back as linear, and
verifies that the data didn't get scrambled on the way.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
---
tests/Makefile.am | 1 +
tests/gem_tiling_max_stride.c | 118 ++++++++++++++++++++++++++++++++++++++++++
2 files changed, 119 insertions(+)
create mode 100644 tests/gem_tiling_max_stride.c
diff --git a/tests/Makefile.am b/tests/Makefile.am
index f8758cd..e147e4e 100644
--- a/tests/Makefile.am
+++ b/tests/Makefile.am
@@ -99,6 +99,7 @@ TESTS_progs = \
gem_ctx_bad_exec \
gem_ctx_basic \
gem_reg_read \
+ gem_tiling_max_stride \
$(NOUVEAU_TESTS) \
prime_self_import \
prime_udl \
diff --git a/tests/gem_tiling_max_stride.c b/tests/gem_tiling_max_stride.c
new file mode 100644
index 0000000..3ba8c10
--- /dev/null
+++ b/tests/gem_tiling_max_stride.c
@@ -0,0 +1,118 @@
+/*
+ * Copyright © 2013 Intel Corporation
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the next
+ * paragraph) shall be included in all copies or substantial portions of the
+ * Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
+ * IN THE SOFTWARE.
+ *
+ * Authors:
+ * Ville Syrjälä <ville.syrjala@linux.intel.com>
+ *
+ */
+
+#include <unistd.h>
+#include <stdlib.h>
+#include <stdio.h>
+#include <string.h>
+#include <assert.h>
+#include <fcntl.h>
+#include <inttypes.h>
+#include <errno.h>
+#include <sys/stat.h>
+#include <sys/ioctl.h>
+#include <sys/mman.h>
+#include "drm.h"
+#include "i915_drm.h"
+#include "drmtest.h"
+#include "intel_gpu_tools.h"
+
+/**
+ * Testcase: Check that max fence stride works
+ */
+
+int main(int argc, char *argv[])
+{
+ int fd;
+ uint32_t *ptr;
+ uint32_t *data;
+ uint32_t handle;
+ uint32_t stride;
+ uint32_t size;
+ uint32_t devid;
+ int i = 0, x, y;
+ int tile_width = 512;
+ int tile_height = 8;
+
+ fd = drm_open_any();
+
+ devid = intel_get_drm_devid(fd);
+
+ if (intel_gen(devid) >= 7)
+ stride = 256 * 1024;
+ else if (intel_gen(devid) >= 4)
+ stride = 128 * 1024;
+ else {
+ tile_width = 128;
+ tile_height = 16;
+ stride = 8 * 1024;
+ }
+
+ size = stride * tile_height;
+
+ data = malloc(size);
+ assert(data);
+
+ /* Fill each line with the line number */
+ for (y = 0; y < tile_height; y++) {
+ for (x = 0; x < stride / 4; x++)
+ data[i++] = y;
+ }
+
+ handle = gem_create(fd, size);
+
+ ptr = gem_mmap(fd, handle, size, PROT_READ | PROT_WRITE);
+ assert(ptr);
+
+ gem_set_tiling(fd, handle, I915_TILING_X, stride);
+
+ gem_set_domain(fd, handle, I915_GEM_DOMAIN_GTT, I915_GEM_DOMAIN_GTT);
+
+ memcpy(ptr, data, size);
+
+ memset(data, 0, size);
+
+ gem_set_tiling(fd, handle, I915_TILING_NONE, 0);
+
+ memcpy(data, ptr, size);
+
+ /* Check that each tile contains the expected pattern */
+ for (i = 0; i < size / 4; ) {
+ for (y = 0; y < tile_height; y++) {
+ for (x = 0; x < tile_width / 4; x++) {
+ assert(y == data[i]);
+ i++;
+ }
+ }
+ }
+
+ munmap(ptr, size);
+
+ close(fd);
+
+ return 0;
+}
--
1.8.1.5
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
next prev parent reply other threads:[~2013-04-09 12:26 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-04-09 12:25 [PATCH i-g-t 0/3] Fence register stuff ville.syrjala
2013-04-09 12:25 ` [PATCH i-g-t 1/3] tests/gem_fenced_exec_thrash: Increase MAX_FENCES to 32 ville.syrjala
2013-04-09 13:05 ` Chris Wilson
2013-04-11 17:43 ` [PATCH] tests/gem_fenced_exec_thrash: Test with > max fences ville.syrjala
2013-04-11 18:22 ` Daniel Vetter
2013-04-09 12:25 ` [PATCH i-g-t 2/3] tests: Use gem_available_fences() ville.syrjala
2013-04-09 12:25 ` ville.syrjala [this message]
2013-04-09 13:06 ` [PATCH i-g-t 3/3] tests/gem_tiling_max_stride: Add a test for max fence stride Chris Wilson
2013-04-09 13:41 ` [PATCH i-g-t v2] " ville.syrjala
2013-04-09 13:51 ` Chris Wilson
2013-04-09 14:45 ` [PATCH i-g-t v4] " ville.syrjala
2013-04-09 18:06 ` Chris Wilson
2013-04-09 18:21 ` Daniel Vetter
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1365510339-10576-4-git-send-email-ville.syrjala@linux.intel.com \
--to=ville.syrjala@linux.intel.com \
--cc=intel-gfx@lists.freedesktop.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox