Intel-GFX Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Daniel Vetter <daniel.vetter@ffwll.ch>
To: Intel Graphics Development <intel-gfx@lists.freedesktop.org>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Subject: [PATCH 2/2] drm/i915: hw state readout support for pixel_multiplier
Date: Sat,  1 Jun 2013 17:17:05 +0200	[thread overview]
Message-ID: <1370099825-20461-2-git-send-email-daniel.vetter@ffwll.ch> (raw)
In-Reply-To: <1370099825-20461-1-git-send-email-daniel.vetter@ffwll.ch>

Incomplete since ilk+ support needs proper pch dpll tracking first.
SDVO get_config parts based on a patch from Jesse Barnes, but fixed up
to actually work.

Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
---
 drivers/gpu/drm/i915/intel_display.c | 25 +++++++++++++++++++++++++
 drivers/gpu/drm/i915/intel_sdvo.c    | 30 +++++++++++++++++++++++++++++-
 2 files changed, 54 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 9f772eb..f126e18 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -4965,6 +4965,23 @@ static bool i9xx_get_pipe_config(struct intel_crtc *crtc,
 
 	i9xx_get_pfit_config(crtc, pipe_config);
 
+	if (INTEL_INFO(dev)->gen >= 4) {
+		tmp = I915_READ(DPLL_MD(crtc->pipe));
+		pipe_config->pixel_multiplier =
+			((tmp & DPLL_MD_UDI_MULTIPLIER_MASK)
+			 >> DPLL_MD_UDI_MULTIPLIER_SHIFT) + 1;
+	} else if (IS_I945G(dev) || IS_I945GM(dev) || IS_G33(dev)) {
+		tmp = I915_READ(DPLL(crtc->pipe));
+		pipe_config->pixel_multiplier =
+			((tmp & SDVO_MULTIPLIER_MASK)
+			 >> SDVO_MULTIPLIER_SHIFT_HIRES) + 1;
+	} else {
+		/* Note that on i915G/GM the pixel multiplier is in the sdvo
+		 * port and will be fixed up in the encoder->get_config
+		 * function. */
+		pipe_config->pixel_multiplier = 1;
+	}
+
 	return true;
 }
 
@@ -5828,6 +5845,12 @@ static bool ironlake_get_pipe_config(struct intel_crtc *crtc,
 					  FDI_DP_PORT_WIDTH_SHIFT) + 1;
 
 		ironlake_get_fdi_m_n_config(crtc, pipe_config);
+
+		/* XXX: Can't properly read out the pch dpll pixel multiplier
+		 * since we don't have state tracking for pch clocks yet. */
+		pipe_config->pixel_multiplier = 1;
+	} else {
+		pipe_config->pixel_multiplier = 1;
 	}
 
 	intel_get_pipe_timings(crtc, pipe_config);
@@ -5980,6 +6003,8 @@ static bool haswell_get_pipe_config(struct intel_crtc *crtc,
 	pipe_config->ips_enabled = hsw_crtc_supports_ips(crtc) &&
 				   (I915_READ(IPS_CTL) & IPS_ENABLE);
 
+	pipe_config->pixel_multiplier = 1;
+
 	return true;
 }
 
diff --git a/drivers/gpu/drm/i915/intel_sdvo.c b/drivers/gpu/drm/i915/intel_sdvo.c
index f4588a2..5c816dd 100644
--- a/drivers/gpu/drm/i915/intel_sdvo.c
+++ b/drivers/gpu/drm/i915/intel_sdvo.c
@@ -1313,9 +1313,13 @@ static bool intel_sdvo_get_hw_state(struct intel_encoder *encoder,
 static void intel_sdvo_get_config(struct intel_encoder *encoder,
 				  struct intel_crtc_config *pipe_config)
 {
+	struct drm_device *dev = encoder->base.dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
 	struct intel_sdvo *intel_sdvo = to_intel_sdvo(&encoder->base);
 	struct intel_sdvo_dtd dtd;
-	u32 flags = 0;
+	int encoder_pixel_multiplier = 0;
+	u32 flags = 0, sdvox;
+	u8 val;
 	bool ret;
 
 	ret = intel_sdvo_get_input_timing(intel_sdvo, &dtd);
@@ -1335,6 +1339,30 @@ static void intel_sdvo_get_config(struct intel_encoder *encoder,
 		flags |= DRM_MODE_FLAG_NVSYNC;
 
 	pipe_config->adjusted_mode.flags |= flags;
+
+	if (IS_I915G(dev) || IS_I915GM(dev)) {
+		sdvox = I915_READ(intel_sdvo->sdvo_reg);
+		pipe_config->pixel_multiplier =
+			((sdvox & SDVO_PORT_MULTIPLY_MASK)
+			 >> SDVO_PORT_MULTIPLY_SHIFT) + 1;
+	}
+
+	/* Cross check the port pixel multiplier with the sdvo encoder state. */
+	intel_sdvo_get_value(intel_sdvo, SDVO_CMD_GET_CLOCK_RATE_MULT, &val, 1);
+	switch (val) {
+	case SDVO_CLOCK_RATE_MULT_1X:
+		encoder_pixel_multiplier = 1;
+		break;
+	case SDVO_CLOCK_RATE_MULT_2X:
+		encoder_pixel_multiplier = 2;
+		break;
+	case SDVO_CLOCK_RATE_MULT_4X:
+		encoder_pixel_multiplier = 4;
+		break;
+	}
+	WARN(encoder_pixel_multiplier != pipe_config->pixel_multiplier,
+	     "SDVO pixel multiplier mismatch, port: %i, encoder: %i\n",
+	     pipe_config->pixel_multiplier, encoder_pixel_multiplier);
 }
 
 static void intel_disable_sdvo(struct intel_encoder *encoder)
-- 
1.7.11.7

  reply	other threads:[~2013-06-01 15:17 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-06-01 15:17 [PATCH 1/2] drm/i915: set default value for config->pixel_multiplier Daniel Vetter
2013-06-01 15:17 ` Daniel Vetter [this message]
2013-06-05 15:01   ` [PATCH 2/2] drm/i915: hw state readout support for pixel_multiplier Imre Deak
2013-06-05 20:16     ` Daniel Vetter
2013-06-06 10:45     ` [PATCH] " Daniel Vetter
2013-06-06 11:50       ` Imre Deak
2013-06-06 12:59         ` Daniel Vetter

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1370099825-20461-2-git-send-email-daniel.vetter@ffwll.ch \
    --to=daniel.vetter@ffwll.ch \
    --cc=intel-gfx@lists.freedesktop.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox