Intel-GFX Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Simon Farnsworth <simon.farnsworth@onelan.co.uk>
To: Chris Wilson <chris@chris-wilson.co.uk>
Cc: intel-gfx@lists.freedesktop.org
Subject: Re: [PATCH] drm/i915/sdvo: Only enable HDMI encodings only if the commandset is supported
Date: Mon, 22 Nov 2010 13:16:43 +0000	[thread overview]
Message-ID: <201011221316.43859.simon.farnsworth@onelan.co.uk> (raw)
In-Reply-To: <1290425438-28937-1-git-send-email-chris@chris-wilson.co.uk>

On Monday 22 November 2010, Chris Wilson <chris@chris-wilson.co.uk> wrote:
> As we conflated intel_sdvo->is_hdmi with both having HDMI support on the
> ADD along with having HDMI support on the monitor, we would attempt to
> use HDMI encodings even if the interface did not support those commands.
> 
> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>

This fixes my problems with the image being in the middle third or so of the 
screen. I've also read the patch and resulting state of code, and it looks 
like the right thing to do, so take your pick of:

Tested-by: Simon Farnsworth <simon.farnsworth@onelan.co.uk>
Reviewed-by: Simon Farnsworth <simon.farnsworth@onelan.co.uk>

> ---
>  drivers/gpu/drm/i915/intel_sdvo.c |   25 ++++++++++++++-----------
>  1 files changed, 14 insertions(+), 11 deletions(-)
> 
> diff --git a/drivers/gpu/drm/i915/intel_sdvo.c
> b/drivers/gpu/drm/i915/intel_sdvo.c index de158b7..8431825 100644
> --- a/drivers/gpu/drm/i915/intel_sdvo.c
> +++ b/drivers/gpu/drm/i915/intel_sdvo.c
> @@ -107,7 +107,8 @@ struct intel_sdvo {
>  	 * This is set if we treat the device as HDMI, instead of DVI.
>  	 */
>  	bool is_hdmi;
> -	bool has_audio;
> +	bool has_hdmi_monitor;
> +	bool has_hdmi_audio;
> 
>  	/**
>  	 * This is set if we detect output of sdvo device as LVDS and
> @@ -1023,7 +1024,7 @@ static void intel_sdvo_mode_set(struct drm_encoder
> *encoder, if (!intel_sdvo_set_target_input(intel_sdvo))
>  		return;
> 
> -	if (intel_sdvo->is_hdmi &&
> +	if (intel_sdvo->has_hdmi_monitor &&
>  	    !intel_sdvo_set_avi_infoframe(intel_sdvo))
>  		return;
> 
> @@ -1063,7 +1064,7 @@ static void intel_sdvo_mode_set(struct drm_encoder
> *encoder, }
>  	if (intel_crtc->pipe == 1)
>  		sdvox |= SDVO_PIPE_B_SELECT;
> -	if (intel_sdvo->has_audio)
> +	if (intel_sdvo->has_hdmi_audio)
>  		sdvox |= SDVO_AUDIO_ENABLE;
> 
>  	if (INTEL_INFO(dev)->gen >= 4) {
> @@ -1388,8 +1389,10 @@ intel_sdvo_hdmi_sink_detect(struct drm_connector
> *connector) /* DDC bus is shared, match EDID to connector type */
>  		if (edid->input & DRM_EDID_INPUT_DIGITAL) {
>  			status = connector_status_connected;
> -			intel_sdvo->is_hdmi = drm_detect_hdmi_monitor(edid);
> -			intel_sdvo->has_audio = drm_detect_monitor_audio(edid);
> +			if (intel_sdvo->is_hdmi) {
> +				intel_sdvo->has_hdmi_monitor = 
drm_detect_hdmi_monitor(edid);
> +				intel_sdvo->has_hdmi_audio = 
drm_detect_monitor_audio(edid);
> +			}
>  		}
>  		connector->display_info.raw_edid = NULL;
>  		kfree(edid);
> @@ -1398,7 +1401,7 @@ intel_sdvo_hdmi_sink_detect(struct drm_connector
> *connector) if (status == connector_status_connected) {
>  		struct intel_sdvo_connector *intel_sdvo_connector =
> to_intel_sdvo_connector(connector); if (intel_sdvo_connector->force_audio)
> -			intel_sdvo->has_audio = intel_sdvo_connector->force_audio > 0;
> +			intel_sdvo->has_hdmi_audio = intel_sdvo_connector->force_audio > 
0;
>  	}
> 
>  	return status;
> @@ -1713,12 +1716,12 @@ intel_sdvo_set_property(struct drm_connector
> *connector,
> 
>  		intel_sdvo_connector->force_audio = val;
> 
> -		if (val > 0 && intel_sdvo->has_audio)
> +		if (val > 0 && intel_sdvo->has_hdmi_audio)
>  			return 0;
> -		if (val < 0 && !intel_sdvo->has_audio)
> +		if (val < 0 && !intel_sdvo->has_hdmi_audio)
>  			return 0;
> 
> -		intel_sdvo->has_audio = val > 0;
> +		intel_sdvo->has_hdmi_audio = val > 0;
>  		goto done;
>  	}
> 
> @@ -2070,6 +2073,8 @@ intel_sdvo_dvi_init(struct intel_sdvo *intel_sdvo,
> int device) intel_sdvo_set_colorimetry(intel_sdvo,
>  					   SDVO_COLORIMETRY_RGB256);
>  		connector->connector_type = DRM_MODE_CONNECTOR_HDMIA;
> +
> +		intel_sdvo_add_hdmi_properties(intel_sdvo_connector);
>  		intel_sdvo->is_hdmi = true;
>  	}
>  	intel_sdvo->base.clone_mask = ((1 << INTEL_SDVO_NON_TV_CLONE_BIT) |
> @@ -2077,8 +2082,6 @@ intel_sdvo_dvi_init(struct intel_sdvo *intel_sdvo,
> int device)
> 
>  	intel_sdvo_connector_init(intel_sdvo_connector, intel_sdvo);
> 
> -	intel_sdvo_add_hdmi_properties(intel_sdvo_connector);
> -
>  	return true;
>  }
-- 
Simon Farnsworth
Software Engineer
ONELAN Limited
http://www.onelan.com/

  reply	other threads:[~2010-11-22 13:16 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <id:0d30dc$k89l8c@orsmga001.jf.intel.com>
2010-11-22 11:30 ` [PATCH] drm/i915/sdvo: Only enable HDMI encodings only if the commandset is supported Chris Wilson
2010-11-22 13:16   ` Simon Farnsworth [this message]
2010-11-22 13:31     ` Chris Wilson

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=201011221316.43859.simon.farnsworth@onelan.co.uk \
    --to=simon.farnsworth@onelan.co.uk \
    --cc=chris@chris-wilson.co.uk \
    --cc=intel-gfx@lists.freedesktop.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox