public inbox for intel-gfx@lists.freedesktop.org
 help / color / mirror / Atom feed
From: Jesse Barnes <jbarnes@virtuousgeek.org>
To: intel-gfx@lists.freedesktop.org
Subject: Re: [PATCH 1/2] drm/i915: clear GFX_MODE on IVB at init time
Date: Fri, 12 Aug 2011 15:18:09 -0700	[thread overview]
Message-ID: <20110812151809.7fdab276@jbarnes-desktop> (raw)
In-Reply-To: <1313186133-2724-1-git-send-email-jbarnes@virtuousgeek.org>

On Fri, 12 Aug 2011 14:55:32 -0700
Jesse Barnes <jbarnes@virtuousgeek.org> wrote:

> GFX_MODE controls important behavior like PPGTT, run lists, and TLB
> invalidate behavior.  On the SDV I'm using, the TLB invalidation mode
> was defaulting to "pipe control only" which meant regular MI_FLUSHes
> wouldn't actually flush the TLB, leading to all sorts of stale data
> getting used.
> 
> So initialize it to 0 at ring buffer init time until we actually use
> PIPE_CONTROL for TLB invalidation.

Ignore this one, see below for an updated patch that uses bit
definitions and makes sure the register gets reset at GPU reset time as
well.

-- 
Jesse Barnes, Intel Open Source Technology Center

>From ac1b88dc2f4cd3a00746063899c6e6be4d5f2065 Mon Sep 17 00:00:00 2001
From: Jesse Barnes <jbarnes@virtuousgeek.org>
Date: Fri, 12 Aug 2011 15:15:06 -0700
Subject: [PATCH] drm/i915: set GFX_MODE to pre-Ivybridge default value even on Ivybridge

Prior to Ivybridge, the GFX_MODE would default to 0x800, meaning that
MI_FLUSH would flush the TLBs in addition to the rest of the caches
indicated in the MI_FLUSH command.  However starting with Ivybridge, the
register defaults to 0x2800 out of reset, meaning that to invalidate the
TLB we need to use PIPE_CONTROL.  Since we're not doing that yet, go
back to the old default so things work.

Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
---
 drivers/gpu/drm/i915/i915_reg.h         |    1 +
 drivers/gpu/drm/i915/intel_ringbuffer.c |    3 +++
 2 files changed, 4 insertions(+), 0 deletions(-)

diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index 7033e01..26641ad 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -375,6 +375,7 @@
 # define MI_FLUSH_ENABLE				(1 << 11)
 
 #define GFX_MODE	0x02520
+#define GFX_MODE_GEN7	0x0229c
 #define   GFX_RUN_LIST_ENABLE		(1<<15)
 #define   GFX_TLB_INVALIDATE_ALWAYS	(1<<13)
 #define   GFX_SURFACE_FAULT_ENABLE	(1<<12)
diff --git a/drivers/gpu/drm/i915/intel_ringbuffer.c b/drivers/gpu/drm/i915/intel_ringbuffer.c
index 47b9b27..6dad947 100644
--- a/drivers/gpu/drm/i915/intel_ringbuffer.c
+++ b/drivers/gpu/drm/i915/intel_ringbuffer.c
@@ -290,6 +290,9 @@ static int init_render_ring(struct intel_ring_buffer *ring)
 		if (IS_GEN6(dev) || IS_GEN7(dev))
 			mode |= MI_FLUSH_ENABLE << 16 | MI_FLUSH_ENABLE;
 		I915_WRITE(MI_MODE, mode);
+		if (IS_GEN7(dev))
+			I915_WRITE(GFX_MODE_GEN7, (GFX_REPLAY_MODE << 16) |
+				   GFX_REPLAY_MODE);
 	}
 
 	if (INTEL_INFO(dev)->gen >= 6) {
-- 
1.7.4.1

  parent reply	other threads:[~2011-08-12 22:18 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2011-08-12 21:55 [PATCH 1/2] drm/i915: clear GFX_MODE on IVB at init time Jesse Barnes
2011-08-12 21:55 ` [PATCH 2/2] drm/i915: suspend/resume rps and ring freq state on IVB Jesse Barnes
2011-08-12 22:18 ` Jesse Barnes [this message]
2011-08-12 22:28   ` [PATCH 1/2] drm/i915: clear GFX_MODE on IVB at init time Jesse Barnes
2011-08-12 22:56     ` Chris Wilson
2011-08-15 23:59     ` Kenneth Graunke

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20110812151809.7fdab276@jbarnes-desktop \
    --to=jbarnes@virtuousgeek.org \
    --cc=intel-gfx@lists.freedesktop.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox