* More crashes with intel driver 1.10.4 and corrupted stack traces for GM45
@ 2011-12-11 20:32 Marc MERLIN
2011-12-13 22:13 ` Marc MERLIN
0 siblings, 1 reply; 8+ messages in thread
From: Marc MERLIN @ 2011-12-11 20:32 UTC (permalink / raw)
To: intel-gfx
[-- Attachment #1: Type: text/plain, Size: 4601 bytes --]
Hi Eugeni and other folks on this list,
I reported some Xorg crashes on my lenovo W500.
In the past, I thought it might have been virtualbox drivers, so I make
sure I don't load them anymore.
In the meantime, I upgraded to ubuntu oneiric.
Kernel is 3.1.0:
agpgart-intel 0000:00:00.0: Intel GM45 Chipset
agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
agpgart-intel 0000:00:00.0: detected 32768K stolen memory
agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
I have ulimit -c unlimited, so I do get cores.
One of my X logs had some of these:
[1535818.200] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.208] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.208] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
Also, I seem to be getting X hangs from time to time where I have to restart
enlightenment since my mouse cursor turns into a diagonal cross and I get trapped
in the coordinates of my current window (killing and restarting e16 fixes this and it's
a problem I never had with e16 until these recent X problems).
Crashes happen every 2 weeks or so.
I'm also happy to turn off advanced features that are likely to cause my problems
if you can suggest some.
First time I got:
Reading symbols from /usr/bin/Xorg...(no debugging symbols found)...done.
[New LWP 17995]
warning: Can't read pathname for load map: Input/output error.
[Thread debugging using libthread_db enabled]
Core was generated by `/usr/bin/X :0 vt7 -nr -nolisten tcp -auth /var/run/xauth/A:0-J8HpXa'.
Program terminated with signal 11, Segmentation fault.
#0 0x0808266b in ?? ()
(gdb) backtrace full
#0 0x0808266b in ?? ()
No symbol table info available.
#1 0x0807fea0 in ProcUngrabKeyboard ()
No symbol table info available.
#2 0x08072117 in ?? ()
No symbol table info available.
#3 0x0806470c in ?? ()
No symbol table info available.
#4 0xb73d0113 in __libc_start_main (main=0x80643a0, argc=8,
ubp_av=0xbfb63204, init=0x81d7100 <__libc_csu_init>,
fini=0x81d7170 <__libc_csu_fini>, rtld_fini=0xb773ebc0,
stack_end=0xbfb631fc) at libc-start.c:226
result = <optimized out>
unwind_buf = {cancel_jmp_buf = {{jmp_buf = {-1219301388, 0, 0, 0,
309354685, 68363436}, mask_was_saved = 0}}, priv = {pad = {
0x0, 0x0, 0x8, 0x8064a00}, data = {prev = 0x0, cleanup = 0x0,
canceltype = 8}}}
not_first_call = <optimized out>
#5 0x08064a21 in _start ()
No symbol table info available.
Second time I got this in the kernel log:
Xorg[22001]: segfault at 35d ip 0808266b sp bfb093e0 error 4 in Xorg[8048000+1e8000]
Reading symbols from /usr/bin/Xorg...(no debugging symbols found)...done.
[New LWP 22001]
warning: Can't read pathname for load map: Input/output error.
[Thread debugging using libthread_db enabled]
Core was generated by `/usr/bin/X :0 vt7 -nr -nolisten tcp -auth /var/run/xauth/A:0-J8HpXa'.
Program terminated with signal 11, Segmentation fault.
#0 0x0808266b in ?? ()
(gdb) backtrace full
#0 0x0808266b in ?? ()
No symbol table info available.
#1 0x0807fea0 in ProcUngrabKeyboard ()
No symbol table info available.
#2 0x08072117 in ?? ()
No symbol table info available.
#3 0x0806470c in ?? ()
No symbol table info available.
#4 0xb7524113 in __libc_start_main (main=0x80643a0, argc=8,
ubp_av=0xbfb095d4, init=0x81d7100 <__libc_csu_init>,
fini=0x81d7170 <__libc_csu_fini>, rtld_fini=0xb7892bc0,
stack_end=0xbfb095cc) at libc-start.c:226
result = <optimized out>
unwind_buf = {cancel_jmp_buf = {{jmp_buf = {-1217908748, 0, 0, 0,
556057159, -460331434}, mask_was_saved = 0}}, priv = {pad = {
0x0, 0x0, 0x8, 0x8064a00}, data = {prev = 0x0, cleanup = 0x0,
canceltype = 8}}}
not_first_call = <optimized out>
#5 0x08064a21 in _start ()
No symbol table info available.
I installed debug symbols:
/usr/lib/debug/usr/lib/libI810XvMC.so.1.0.0
/usr/lib/debug/usr/lib/libIntelXvMC.so.1.0.0
/usr/lib/debug/usr/lib/xorg
/usr/lib/debug/usr/lib/xorg/modules
/usr/lib/debug/usr/lib/xorg/modules/drivers
/usr/lib/debug/usr/lib/xorg/modules/drivers/intel_drv.so
But I'm not too sure how to get gdb to use them.
Thanks for any help or suggestions.
Marc
--
"A mouse is a device used to point at the xterm you want to type in" - A.S.R.
Microsoft is to operating systems ....
.... what McDonalds is to gourmet cooking
Home page: http://marc.merlins.org/
[-- Attachment #2: xorg.conf --]
[-- Type: text/plain, Size: 4175 bytes --]
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
#Section "Files"
# ModulePath "/usr/lib/xorg/modules"
# FontPath "/usr/share/fonts/X11/misc"
# FontPath "/usr/share/fonts/X11/100dpi/:unscaled"
# FontPath "/usr/share/fonts/X11/75dpi/:unscaled"
# FontPath "/usr/share/fonts/X11/Type1"
# FontPath "/usr/share/fonts/X11/100dpi"
# FontPath "/usr/share/fonts/X11/75dpi"
# FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
# FontPath "built-ins"
#EndSection
Section "Module"
#Load "vnc"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "us"
Option "XkbOptions" "terminate:ctrl_alt_bksp"
EndSection
# This is needed by the new dbus keyboard driver.
Section "InputClass"
Identifier "Keyboard Defaults"
MatchIsKeyboard "yes"
Option "XkbOptions" "terminate:ctrl_alt_bksp"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
EndSection
#Section "Device"
# Identifier "ATI Radeon r6xx"
# #Driver "radeon"
# # radeonhd / exa buggy with 3D in 1.2.5 driver still
# Driver "radeonhd"
# Busid "PCI:1:0:0"
# # better EXA is default now
# Option "AccelMethod" "exa"
# #Option "AccelMethod" "xaa"
# Option "DRI" "true"
# Enabling KMS may break X.org drivers that are not KMS-ready, for instance
# radeonhd or vesa.
#
# In case of trouble KMS can be disabled with the 'nomodeset' kernel
# command line parameter, or by editing /etc/modprobe.d/radeon-kms.conf.
#
#EndSection
#
#
Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "NoAccel" # [<bool>]
#Option "SWcursor" # [<bool>]
#Option "ColorKey" # <i>
#Option "CacheLines" # <i>
#Option "Dac6Bit" # [<bool>]
#Option "DRI" # [<bool>]
#Option "NoDDC" # [<bool>]
#Option "ShowCache" # [<bool>]
#Option "XvMCSurfaces" # <i>
#Option "PageFlip" # [<bool>]
Identifier "Intel GM45"
Driver "intel"
VendorName "Intel Corporation"
BoardName "Mobile 4 Series Chipset Integrated Graphics Controller"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
# SubSection "Display"
# Viewport 0 0
# Depth 1
# EndSubSection
# SubSection "Display"
# Viewport 0 0
# Depth 4
# EndSubSection
# SubSection "Display"
# Viewport 0 0
# Depth 8
# EndSubSection
# SubSection "Display"
# Viewport 0 0
# Depth 15
# EndSubSection
# SubSection "Display"
# Viewport 0 0
# Depth 16
# EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
# Custom
Section "DRI"
Mode 0666
EndSection
Section "ServerFlags"
# Option "AIGLX" "on"
# this would disable hotplugging that creates this:
# (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
# (WW) Disabling Mouse0
# (WW) Disabling Keyboard0
# More info here: https://wiki.archlinux.org/index.php/Xorg#Disabling_Input_Hot-plugging
Option "AutoAddDevices" "False"
# https://wiki.ubuntu.com/X/Backtracing
Option "NoTrapSignals" "true"
#For instance, to start Xorg from within gdb (over a ssh connection), start gdb:
#sudo gdb /usr/bin/Xorg 2>&1 | tee gdb-Xorg.txt
#inside gdm, start up Xorg:
#(gdb) run -keeptty -dumbSched
EndSection
Section "Extensions"
# Option "Composite" "Enable"
EndSection
[-- Attachment #3: core2.log --]
[-- Type: text/plain, Size: 102787 bytes --]
[794061.118]
X.Org X Server 1.10.4
Release Date: 2011-08-19
[794061.118] X Protocol Version 11, Revision 0
[794061.118] Build Operating System: Linux 2.6.24-29-server i686 Ubuntu
[794061.118] Current Operating System: Linux gandalfthegrey.merlins.org 3.1.0-core2-volpreempt-noide-hm64-20111109 #1 SMP Wed Nov 9 09:10:19 PST 2011 i686
[794061.118] Kernel command line: auto BOOT_IMAGE=linux ro root=/dev/mapper/cryptroot panic=20 resume=/dev/sda7 usbcore.autosuspend=1 noplymouth INIT_VERBOSE=yes i915.modeset=1 pcie_aspm=force
[794061.118] Build Date: 19 October 2011 05:09:41AM
[794061.118] xorg-server 2:1.10.4-1ubuntu4.2 (For technical support please see http://www.ubuntu.com/support)
[794061.118] Current version of pixman: 0.22.2
[794061.118] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[794061.118] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[794061.118] (==) Log file: "/var/log/Xorg.0.log", Time: Tue Nov 29 07:57:38 2011
[794061.196] (==) Using config file: "/etc/X11/xorg.conf"
[794061.196] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[794061.334] (==) ServerLayout "X.org Configured"
[794061.334] (**) |-->Screen "Screen0" (0)
[794061.334] (**) | |-->Monitor "Monitor0"
[794061.334] (==) No device specified for screen "Screen0".
Using the first device section listed.
[794061.334] (**) | |-->Device "Intel GM45"
[794061.334] (**) |-->Input Device "Mouse0"
[794061.334] (**) |-->Input Device "Keyboard0"
[794061.334] (**) Option "NoTrapSignals" "true"
[794061.334] (**) Option "AIGLX" "on"
[794061.334] (**) Option "AutoAddDevices" "False"
[794061.334] (**) Not automatically adding devices
[794061.334] (==) Automatically enabling devices
[794061.677] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[794061.677] Entry deleted from font path.
[794061.820] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
built-ins
[794061.820] (==) ModulePath set to "/usr/lib/i386-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
[794061.820] (**) Extension "Composite" is enabled
[794061.820] (II) Loader magic: 0x823ada0
[794061.820] (II) Module ABI versions:
[794061.820] X.Org ANSI C Emulation: 0.4
[794061.820] X.Org Video Driver: 10.0
[794061.820] X.Org XInput driver : 12.3
[794061.820] X.Org Server Extension : 5.0
[794061.823] (--) PCI:*(0:0:2:0) 8086:2a42:17aa:2114 rev 7, Mem @ 0xf4400000/4194304, 0xd0000000/268435456, I/O @ 0x00001800/8
[794061.823] (--) PCI: (0:0:2:1) 8086:2a43:17aa:2114 rev 7, Mem @ 0xf4200000/1048576
[794061.823] (II) Open ACPI successful (/var/run/acpid.socket)
[794061.823] (II) "extmod" will be loaded by default.
[794061.824] (II) "dbe" will be loaded by default.
[794061.824] (II) "glx" will be loaded by default.
[794061.824] (II) "record" will be loaded by default.
[794061.824] (II) "dri" will be loaded by default.
[794061.824] (II) "dri2" will be loaded by default.
[794061.824] (II) LoadModule: "extmod"
[794062.161] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[794062.161] (II) Module extmod: vendor="X.Org Foundation"
[794062.161] compiled for 1.10.4, module version = 1.0.0
[794062.161] Module class: X.Org Server Extension
[794062.161] ABI class: X.Org Server Extension, version 5.0
[794062.161] (II) Loading extension MIT-SCREEN-SAVER
[794062.161] (II) Loading extension XFree86-VidModeExtension
[794062.161] (II) Loading extension XFree86-DGA
[794062.161] (II) Loading extension DPMS
[794062.161] (II) Loading extension XVideo
[794062.161] (II) Loading extension XVideo-MotionCompensation
[794062.161] (II) Loading extension X-Resource
[794062.161] (II) LoadModule: "dbe"
[794062.162] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[794062.187] (II) Module dbe: vendor="X.Org Foundation"
[794062.187] compiled for 1.10.4, module version = 1.0.0
[794062.187] Module class: X.Org Server Extension
[794062.187] ABI class: X.Org Server Extension, version 5.0
[794062.187] (II) Loading extension DOUBLE-BUFFER
[794062.187] (II) LoadModule: "glx"
[794062.187] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[794062.248] (II) Module glx: vendor="X.Org Foundation"
[794062.248] compiled for 1.10.4, module version = 1.0.0
[794062.248] ABI class: X.Org Server Extension, version 5.0
[794062.249] (**) AIGLX enabled
[794062.249] (II) Loading extension GLX
[794062.249] (II) LoadModule: "record"
[794062.249] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[794062.257] (II) Module record: vendor="X.Org Foundation"
[794062.257] compiled for 1.10.4, module version = 1.13.0
[794062.257] Module class: X.Org Server Extension
[794062.257] ABI class: X.Org Server Extension, version 5.0
[794062.257] (II) Loading extension RECORD
[794062.257] (II) LoadModule: "dri"
[794062.257] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[794062.268] (II) Module dri: vendor="X.Org Foundation"
[794062.268] compiled for 1.10.4, module version = 1.0.0
[794062.268] ABI class: X.Org Server Extension, version 5.0
[794062.268] (II) Loading extension XFree86-DRI
[794062.268] (II) LoadModule: "dri2"
[794062.269] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[794062.277] (II) Module dri2: vendor="X.Org Foundation"
[794062.277] compiled for 1.10.4, module version = 1.2.0
[794062.277] ABI class: X.Org Server Extension, version 5.0
[794062.277] (II) Loading extension DRI2
[794062.277] (II) LoadModule: "intel"
[794062.277] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[794062.378] (II) Module intel: vendor="X.Org Foundation"
[794062.378] compiled for 1.10.2.902, module version = 2.15.901
[794062.378] Module class: X.Org Video Driver
[794062.378] ABI class: X.Org Video Driver, version 10.0
[794062.378] (II) LoadModule: "mouse"
[794062.378] (II) Loading /usr/lib/xorg/modules/input/mouse_drv.so
[794062.391] (II) Module mouse: vendor="X.Org Foundation"
[794062.391] compiled for 1.10.2.902, module version = 1.7.1
[794062.391] Module class: X.Org XInput Driver
[794062.391] ABI class: X.Org XInput driver, version 12.3
[794062.391] (II) LoadModule: "kbd"
[794062.391] (II) Loading /usr/lib/xorg/modules/input/kbd_drv.so
[794062.405] (II) Module kbd: vendor="X.Org Foundation"
[794062.405] compiled for 1.10.2, module version = 1.6.0
[794062.405] Module class: X.Org XInput Driver
[794062.405] ABI class: X.Org XInput driver, version 12.3
[794062.405] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server
[794062.405] (++) using VT number 7
[794063.043] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[794063.043] drmOpenDevice: node name is /dev/dri/card0
[794063.043] drmOpenDevice: open result is 9, (OK)
[794063.043] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
[794063.043] drmOpenDevice: node name is /dev/dri/card0
[794063.043] drmOpenDevice: open result is 9, (OK)
[794063.043] drmOpenByBusid: drmOpenMinor returns 9
[794063.043] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[794063.043] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[794063.043] (==) intel(0): RGB weight 888
[794063.043] (==) intel(0): Default visual is TrueColor
[794063.043] (II) intel(0): Integrated Graphics Chipset: Intel(R) GM45
[794063.043] (--) intel(0): Chipset: "GM45"
[794063.043] (**) intel(0): Relaxed fencing enabled
[794063.043] (**) intel(0): Wait on SwapBuffers? enabled
[794063.043] (**) intel(0): Triple buffering? enabled
[794063.043] (**) intel(0): Framebuffer tiled
[794063.043] (**) intel(0): Pixmaps tiled
[794063.043] (**) intel(0): 3D buffers tiled
[794063.043] (**) intel(0): SwapBuffers wait enabled
[794063.043] (==) intel(0): video overlay key set to 0x101fe
[794063.043] (II) intel(0): Output LVDS1 using monitor section Monitor0
[794063.044] (II) intel(0): found backlight control interface /sys/class/backlight/acpi_video0
[794063.058] (II) intel(0): Output VGA1 has no monitor section
[794063.070] (II) intel(0): Output DP1 has no monitor section
[794063.070] (II) intel(0): EDID for output LVDS1
[794063.070] (II) intel(0): Manufacturer: LEN Model: 4055 Serial#: 0
[794063.070] (II) intel(0): Year: 2007 Week: 0
[794063.070] (II) intel(0): EDID Version: 1.3
[794063.070] (II) intel(0): Digital Display Input
[794063.070] (II) intel(0): Max Image Size [cm]: horiz.: 33 vert.: 21
[794063.070] (II) intel(0): Gamma: 2.20
[794063.070] (II) intel(0): DPMS capabilities: StandBy Suspend Off
[794063.070] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[794063.070] (II) intel(0): First detailed timing is preferred mode
[794063.070] (II) intel(0): redX: 0.580 redY: 0.340 greenX: 0.310 greenY: 0.550
[794063.070] (II) intel(0): blueX: 0.155 blueY: 0.155 whiteX: 0.313 whiteY: 0.329
[794063.070] (II) intel(0): Manufacturer's mask: 0
[794063.070] (II) intel(0): Supported detailed timing:
[794063.070] (II) intel(0): clock: 167.8 MHz Image Size: 331 x 207 mm
[794063.070] (II) intel(0): h_active: 1920 h_sync: 1968 h_sync_end 2000 h_blank_end 2298 h_border: 0
[794063.070] (II) intel(0): v_active: 1200 v_sync: 1203 v_sync_end 1206 v_blanking: 1217 v_border: 0
[794063.071] (II) intel(0): Supported detailed timing:
[794063.071] (II) intel(0): clock: 134.3 MHz Image Size: 331 x 207 mm
[794063.071] (II) intel(0): h_active: 1920 h_sync: 1968 h_sync_end 2000 h_blank_end 2208 h_border: 0
[794063.071] (II) intel(0): v_active: 1200 v_sync: 1202 v_sync_end 1208 v_blanking: 1220 v_border: 0
[794063.071] (II) intel(0): Unknown vendor-specific block f
[794063.071] (II) intel(0): LTN154U2-L05
[794063.071] (II) intel(0): EDID (in hex):
[794063.071] (II) intel(0): 00ffffffffffff0030ae554000000000
[794063.071] (II) intel(0): 0011010380211578ea87f594574f8c27
[794063.071] (II) intel(0): 27505400000001010101010101010101
[794063.071] (II) intel(0): 0101010101018c41807a71b011403020
[794063.071] (II) intel(0): 33004bcf100000197434802071b01440
[794063.071] (II) intel(0): 302026004bcf100000190000000f00d1
[794063.071] (II) intel(0): 0a32d10a281101004ca35532000000fe
[794063.071] (II) intel(0): 004c544e31353455322d4c30350a0011
[794063.071] (II) intel(0): EDID vendor "LEN", prod id 16469
[794063.071] (II) intel(0): Printing DDC gathered Modelines:
[794063.071] (II) intel(0): Modeline "1920x1200"x0.0 167.80 1920 1968 2000 2298 1200 1203 1206 1217 -hsync -vsync (73.0 kHz)
[794063.071] (II) intel(0): Modeline "1920x1200"x0.0 134.28 1920 1968 2000 2208 1200 1202 1208 1220 -hsync -vsync (60.8 kHz)
[794063.072] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[794063.072] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[794063.072] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[794063.072] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[794063.072] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
[794063.072] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
[794063.072] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[794063.072] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
[794063.072] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
[794063.072] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
[794063.072] (II) intel(0): Not using default mode "576x432" (doublescan mode not supported)
[794063.072] (II) intel(0): Not using default mode "680x384" (doublescan mode not supported)
[794063.072] (II) intel(0): Not using default mode "680x384" (doublescan mode not supported)
[794063.072] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
[794063.072] (II) intel(0): Not using default mode "720x450" (doublescan mode not supported)
[794063.072] (II) intel(0): Not using default mode "800x512" (doublescan mode not supported)
[794063.072] (II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
[794063.072] (II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
[794063.072] (II) intel(0): Not using default mode "960x540" (doublescan mode not supported)
[794063.072] (II) intel(0): Not using default mode "960x600" (doublescan mode not supported)
[794063.072] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
[794063.072] (II) intel(0): Printing probed modes for output LVDS1
[794063.072] (II) intel(0): Modeline "1920x1200"x60.0 167.80 1920 1968 2000 2298 1200 1203 1206 1217 -hsync -vsync (73.0 kHz)
[794063.072] (II) intel(0): Modeline "1920x1200"x60.0 154.00 1920 1968 2000 2080 1200 1203 1209 1235 +hsync -vsync (74.0 kHz)
[794063.072] (II) intel(0): Modeline "1920x1200"x49.8 134.28 1920 1968 2000 2208 1200 1202 1208 1220 -hsync -vsync (60.8 kHz)
[794063.072] (II) intel(0): Modeline "1920x1080"x59.9 138.50 1920 1968 2000 2080 1080 1083 1088 1111 +hsync -vsync (66.6 kHz)
[794063.073] (II) intel(0): Modeline "1600x1200"x60.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz)
[794063.073] (II) intel(0): Modeline "1680x1050"x60.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
[794063.073] (II) intel(0): Modeline "1680x1050"x59.9 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz)
[794063.073] (II) intel(0): Modeline "1600x1024"x60.2 103.12 1600 1600 1656 1664 1024 1024 1029 1030 +hsync +vsync (62.0 kHz)
[794063.073] (II) intel(0): Modeline "1400x1050"x60.0 122.00 1400 1488 1640 1880 1050 1052 1064 1082 +hsync +vsync (64.9 kHz)
[794063.073] (II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[794063.073] (II) intel(0): Modeline "1440x900"x59.9 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz)
[794063.073] (II) intel(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
[794063.073] (II) intel(0): Modeline "1360x768"x59.8 84.75 1360 1432 1568 1776 768 771 781 798 -hsync +vsync (47.7 kHz)
[794063.073] (II) intel(0): Modeline "1360x768"x60.0 72.00 1360 1408 1440 1520 768 771 781 790 +hsync -vsync (47.4 kHz)
[794063.073] (II) intel(0): Modeline "1152x864"x60.0 81.62 1152 1216 1336 1520 864 865 868 895 -hsync +vsync (53.7 kHz)
[794063.073] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[794063.073] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[794063.073] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
[794063.073] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[794063.089] (II) intel(0): EDID for output VGA1
[794063.101] (II) intel(0): EDID for output DP1
[794063.101] (II) intel(0): Output LVDS1 connected
[794063.101] (II) intel(0): Output VGA1 disconnected
[794063.101] (II) intel(0): Output DP1 disconnected
[794063.101] (II) intel(0): Using exact sizes for initial modes
[794063.101] (II) intel(0): Output LVDS1 using initial mode 1920x1200
[794063.101] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[794063.101] (II) intel(0): Kernel page flipping support detected, enabling
[794063.101] (**) intel(0): Display dimensions: (330, 210) mm
[794063.101] (**) intel(0): DPI set to (147, 145)
[794063.101] (II) Loading sub module "fb"
[794063.101] (II) LoadModule: "fb"
[794063.102] (II) Loading /usr/lib/xorg/modules/libfb.so
[794063.121] (II) Module fb: vendor="X.Org Foundation"
[794063.121] compiled for 1.10.4, module version = 1.0.0
[794063.121] ABI class: X.Org ANSI C Emulation, version 0.4
[794063.122] (II) Loading sub module "dri2"
[794063.122] (II) LoadModule: "dri2"
[794063.123] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[794063.123] (II) Module dri2: vendor="X.Org Foundation"
[794063.123] compiled for 1.10.4, module version = 1.2.0
[794063.123] ABI class: X.Org Server Extension, version 5.0
[794063.123] (==) Depth 24 pixmap format is 32 bpp
[794063.133] (II) intel(0): [DRI2] Setup complete
[794063.133] (II) intel(0): [DRI2] DRI driver: i965
[794063.133] (II) intel(0): Allocated new frame buffer 1920x1200 stride 7680, tiled
[794063.142] (II) UXA(0): Driver registered support for the following operations:
[794063.142] (II) solid
[794063.142] (II) copy
[794063.142] (II) composite (RENDER acceleration)
[794063.142] (II) put_image
[794063.142] (II) get_image
[794063.142] (==) intel(0): Backing store disabled
[794063.142] (==) intel(0): Silken mouse enabled
[794063.142] (II) intel(0): Initializing HW Cursor
[794063.167] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[794063.170] (==) intel(0): DPMS enabled
[794063.170] (==) intel(0): Intel XvMC decoder enabled
[794063.170] (II) intel(0): Set up textured video
[794063.179] (II) intel(0): [XvMC] xvmc_vld driver initialized.
[794063.179] (II) intel(0): direct rendering: DRI2 Enabled
[794063.179] (==) intel(0): hotplug detection: "enabled"
[794063.179] (--) RandR disabled
[794063.179] (II) Initializing built-in extension Generic Event Extension
[794063.179] (II) Initializing built-in extension SHAPE
[794063.179] (II) Initializing built-in extension MIT-SHM
[794063.179] (II) Initializing built-in extension XInputExtension
[794063.179] (II) Initializing built-in extension XTEST
[794063.179] (II) Initializing built-in extension BIG-REQUESTS
[794063.179] (II) Initializing built-in extension SYNC
[794063.179] (II) Initializing built-in extension XKEYBOARD
[794063.179] (II) Initializing built-in extension XC-MISC
[794063.179] (II) Initializing built-in extension SECURITY
[794063.179] (II) Initializing built-in extension XINERAMA
[794063.179] (II) Initializing built-in extension XFIXES
[794063.179] (II) Initializing built-in extension RENDER
[794063.179] (II) Initializing built-in extension RANDR
[794063.179] (II) Initializing built-in extension COMPOSITE
[794063.179] (II) Initializing built-in extension DAMAGE
[794063.179] (II) Initializing built-in extension GESTURE
[794063.188] (II) AIGLX: Trying DRI driver /usr/lib/i386-linux-gnu/dri/i965_dri.so
[794063.316] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[794063.316] (II) AIGLX: enabled GLX_INTEL_swap_event
[794063.316] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[794063.316] (II) AIGLX: enabled GLX_SGI_make_current_read
[794063.316] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[794063.316] (II) AIGLX: Loaded and initialized i965
[794063.316] (II) GLX: Initialized DRI2 GL provider for screen 0
[794063.317] (II) intel(0): Setting screen physical size to 507 x 317
[794063.487] (II) XKB: reuse xkmfile /var/lib/xkb/server-02D8252E59564A234380F1E5417646A9DB3B7452.xkm
[794063.513] (II) Using input driver 'mouse' for 'Mouse0'
[794063.513] (II) Loading /usr/lib/xorg/modules/input/mouse_drv.so
[794063.513] (**) Option "CorePointer"
[794063.513] (**) Mouse0: always reports core events
[794063.513] (**) Option "Protocol" "auto"
[794063.513] (**) Option "Device" "/dev/input/mice"
[794063.513] (II) Mouse0: Setting mouse protocol to "ExplorerPS/2"
[794063.513] (**) Mouse0: Protocol: "auto"
[794063.513] (**) Mouse0: always reports core events
[794063.514] (==) Mouse0: Emulate3Buttons, Emulate3Timeout: 50
[794063.514] (**) Option "ZAxisMapping" "4 5 6 7"
[794063.514] (**) Mouse0: ZAxisMapping: buttons 4, 5, 6 and 7
[794063.514] (**) Mouse0: Buttons: 11
[794063.514] (II) XINPUT: Adding extended input device "Mouse0" (type: MOUSE)
[794063.514] (**) Mouse0: (accel) keeping acceleration scheme 1
[794063.514] (**) Mouse0: (accel) acceleration profile 0
[794063.514] (**) Mouse0: (accel) acceleration factor: 2.000
[794063.514] (**) Mouse0: (accel) acceleration threshold: 4
[794063.514] (II) Mouse0: Setting mouse protocol to "ExplorerPS/2"
[794063.808] (II) Mouse0: ps2EnableDataReporting: succeeded
[794063.808] (II) Using input driver 'kbd' for 'Keyboard0'
[794063.808] (II) Loading /usr/lib/xorg/modules/input/kbd_drv.so
[794063.808] (**) Option "CoreKeyboard"
[794063.808] (**) Keyboard0: always reports core events
[794063.808] (**) Keyboard0: always reports core events
[794063.808] (**) Option "Protocol" "standard"
[794063.808] (**) Option "XkbRules" "xorg"
[794063.808] (**) Option "XkbModel" "pc105"
[794063.808] (**) Option "XkbLayout" "us"
[794063.808] (**) Option "XkbOptions" "terminate:ctrl_alt_bksp"
[794063.808] (II) XINPUT: Adding extended input device "Keyboard0" (type: KEYBOARD)
[794063.819] (II) XKB: reuse xkmfile /var/lib/xkb/server-E6715BBB0C6029B8A19B43D2EE7353165C74B486.xkm
[794063.871] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[794063.871] (II) AutoAddDevices is off - not adding device.
[794063.872] (II) config/udev: Adding input device Video Bus (/dev/input/event4)
[794063.872] (II) AutoAddDevices is off - not adding device.
[794063.881] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
[794063.881] (II) AutoAddDevices is off - not adding device.
[794063.881] (II) config/udev: Adding input device Sleep Button (/dev/input/event2)
[794063.881] (II) AutoAddDevices is off - not adding device.
[794063.886] (II) config/udev: Adding input device UVC Camera (17ef:4807) (/dev/input/event7)
[794063.886] (II) AutoAddDevices is off - not adding device.
[794063.886] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event8)
[794063.886] (II) AutoAddDevices is off - not adding device.
[794063.887] (II) config/udev: Adding input device HDA Intel Mic (/dev/input/event10)
[794063.887] (II) AutoAddDevices is off - not adding device.
[794063.888] (II) config/udev: Adding input device HDA Intel Headphone (/dev/input/event11)
[794063.888] (II) AutoAddDevices is off - not adding device.
[794063.888] (II) config/udev: Adding input device HDA Intel Headphone (/dev/input/event12)
[794063.888] (II) AutoAddDevices is off - not adding device.
[794063.889] (II) config/udev: Adding input device HDA Intel Mic (/dev/input/event9)
[794063.889] (II) AutoAddDevices is off - not adding device.
[794063.897] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[794063.897] (II) AutoAddDevices is off - not adding device.
[794063.898] (II) config/udev: Adding input device TPPS/2 IBM TrackPoint (/dev/input/event5)
[794063.898] (II) AutoAddDevices is off - not adding device.
[794063.898] (II) config/udev: Adding input device TPPS/2 IBM TrackPoint (/dev/input/mouse0)
[794063.898] (II) AutoAddDevices is off - not adding device.
[794063.899] (II) config/udev: Adding input device ThinkPad Extra Buttons (/dev/input/event6)
[794063.899] (II) AutoAddDevices is off - not adding device.
[794063.906] (II) config/udev: Adding input device ThinkPad HDAPS joystick emulation (/dev/input/event13)
[794063.906] (II) AutoAddDevices is off - not adding device.
[794063.906] (II) config/udev: Adding input device ThinkPad HDAPS joystick emulation (/dev/input/js0)
[794063.906] (II) AutoAddDevices is off - not adding device.
[794063.907] (II) config/udev: Adding input device ThinkPad HDAPS accelerometer data (/dev/input/event14)
[794063.907] (II) AutoAddDevices is off - not adding device.
[794063.907] (II) config/udev: Adding input device ThinkPad HDAPS accelerometer data (/dev/input/js1)
[794063.907] (II) AutoAddDevices is off - not adding device.
[794066.524] (II) XKB: reuse xkmfile /var/lib/xkb/server-E6715BBB0C6029B8A19B43D2EE7353165C74B486.xkm
[794066.720] (II) intel(0): EDID vendor "LEN", prod id 16469
[794066.720] (II) intel(0): Printing DDC gathered Modelines:
[794066.720] (II) intel(0): Modeline "1920x1200"x0.0 167.80 1920 1968 2000 2298 1200 1203 1206 1217 -hsync -vsync (73.0 kHz)
[794066.720] (II) intel(0): Modeline "1920x1200"x0.0 134.28 1920 1968 2000 2208 1200 1202 1208 1220 -hsync -vsync (60.8 kHz)
[794066.749] (II) intel(0): EDID vendor "LEN", prod id 16469
[794066.749] (II) intel(0): Printing DDC gathered Modelines:
[794066.749] (II) intel(0): Modeline "1920x1200"x0.0 167.80 1920 1968 2000 2298 1200 1203 1206 1217 -hsync -vsync (73.0 kHz)
[794066.749] (II) intel(0): Modeline "1920x1200"x0.0 134.28 1920 1968 2000 2208 1200 1202 1208 1220 -hsync -vsync (60.8 kHz)
[794073.009] (II) AIGLX: Suspending AIGLX clients for VT switch
[794182.692] (II) Open ACPI successful (/var/run/acpid.socket)
[794182.692] (II) AIGLX: Resuming AIGLX clients after VT switch
[794182.701] (II) intel(0): EDID vendor "LEN", prod id 16469
[794182.701] (II) intel(0): Printing DDC gathered Modelines:
[794182.701] (II) intel(0): Modeline "1920x1200"x0.0 167.80 1920 1968 2000 2298 1200 1203 1206 1217 -hsync -vsync (73.0 kHz)
[794182.701] (II) intel(0): Modeline "1920x1200"x0.0 134.28 1920 1968 2000 2208 1200 1202 1208 1220 -hsync -vsync (60.8 kHz)
[794183.033] (II) Mouse0: ps2EnableDataReporting: succeeded
[794254.123] (II) 3rd Button detected: disabling emulate3Button
[804644.051] (II) AIGLX: Suspending AIGLX clients for VT switch
[804647.770] (II) Open ACPI successful (/var/run/acpid.socket)
[804647.770] (II) AIGLX: Resuming AIGLX clients after VT switch
[804647.882] (II) intel(0): EDID vendor "LEN", prod id 16469
[804647.882] (II) intel(0): Printing DDC gathered Modelines:
[804647.882] (II) intel(0): Modeline "1920x1200"x0.0 167.80 1920 1968 2000 2298 1200 1203 1206 1217 -hsync -vsync (73.0 kHz)
[804647.882] (II) intel(0): Modeline "1920x1200"x0.0 134.28 1920 1968 2000 2208 1200 1202 1208 1220 -hsync -vsync (60.8 kHz)
[804648.211] (II) Mouse0: ps2EnableDataReporting: succeeded
[805102.039] (II) 3rd Button detected: disabling emulate3Button
[855644.468] (II) AIGLX: Suspending AIGLX clients for VT switch
[855648.335] (II) Open ACPI successful (/var/run/acpid.socket)
[855648.335] (II) AIGLX: Resuming AIGLX clients after VT switch
[855648.447] (II) intel(0): EDID vendor "LEN", prod id 16469
[855648.475] (II) intel(0): Printing DDC gathered Modelines:
[855648.549] (II) intel(0): Modeline "1920x1200"x0.0 167.80 1920 1968 2000 2298 1200 1203 1206 1217 -hsync -vsync (73.0 kHz)
[855648.549] (II) intel(0): Modeline "1920x1200"x0.0 134.28 1920 1968 2000 2208 1200 1202 1208 1220 -hsync -vsync (60.8 kHz)
[855648.943] (II) Mouse0: ps2EnableDataReporting: succeeded
[855669.918] (II) 3rd Button detected: disabling emulate3Button
[856960.835] (II) PM Event received: Capability Changed
[856960.873] I830PMEvent: Capability change
[859097.619] (II) AIGLX: Suspending AIGLX clients for VT switch
[859101.489] (II) Open ACPI successful (/var/run/acpid.socket)
[859101.489] (II) AIGLX: Resuming AIGLX clients after VT switch
[859101.512] (II) intel(0): EDID vendor "LEN", prod id 16469
[859101.512] (II) intel(0): Printing DDC gathered Modelines:
[859101.512] (II) intel(0): Modeline "1920x1200"x0.0 167.80 1920 1968 2000 2298 1200 1203 1206 1217 -hsync -vsync (73.0 kHz)
[859101.512] (II) intel(0): Modeline "1920x1200"x0.0 134.28 1920 1968 2000 2208 1200 1202 1208 1220 -hsync -vsync (60.8 kHz)
[859101.847] (II) Mouse0: ps2EnableDataReporting: succeeded
[859195.859] (II) 3rd Button detected: disabling emulate3Button
[860368.237] (II) AIGLX: Suspending AIGLX clients for VT switch
[860372.035] (II) Open ACPI successful (/var/run/acpid.socket)
[860372.035] (II) AIGLX: Resuming AIGLX clients after VT switch
[860372.045] (II) intel(0): EDID vendor "LEN", prod id 16469
[860372.045] (II) intel(0): Printing DDC gathered Modelines:
[860372.045] (II) intel(0): Modeline "1920x1200"x0.0 167.80 1920 1968 2000 2298 1200 1203 1206 1217 -hsync -vsync (73.0 kHz)
[860372.045] (II) intel(0): Modeline "1920x1200"x0.0 134.28 1920 1968 2000 2208 1200 1202 1208 1220 -hsync -vsync (60.8 kHz)
[860372.375] (II) Mouse0: ps2EnableDataReporting: succeeded
[860448.390] (II) AIGLX: Suspending AIGLX clients for VT switch
[860452.099] (II) Open ACPI successful (/var/run/acpid.socket)
[860452.099] (II) AIGLX: Resuming AIGLX clients after VT switch
[860452.119] (II) intel(0): EDID vendor "LEN", prod id 16469
[860452.119] (II) intel(0): Printing DDC gathered Modelines:
[860452.119] (II) intel(0): Modeline "1920x1200"x0.0 167.80 1920 1968 2000 2298 1200 1203 1206 1217 -hsync -vsync (73.0 kHz)
[860452.119] (II) intel(0): Modeline "1920x1200"x0.0 134.28 1920 1968 2000 2208 1200 1202 1208 1220 -hsync -vsync (60.8 kHz)
[860452.448] (II) Mouse0: ps2EnableDataReporting: succeeded
[860851.681] (II) 3rd Button detected: disabling emulate3Button
[864145.230] (II) AIGLX: Suspending AIGLX clients for VT switch
[864149.036] (II) Open ACPI successful (/var/run/acpid.socket)
[864149.036] (II) AIGLX: Resuming AIGLX clients after VT switch
[864149.051] (II) intel(0): EDID vendor "LEN", prod id 16469
[864149.051] (II) intel(0): Printing DDC gathered Modelines:
[864149.051] (II) intel(0): Modeline "1920x1200"x0.0 167.80 1920 1968 2000 2298 1200 1203 1206 1217 -hsync -vsync (73.0 kHz)
[864149.051] (II) intel(0): Modeline "1920x1200"x0.0 134.28 1920 1968 2000 2208 1200 1202 1208 1220 -hsync -vsync (60.8 kHz)
[864149.382] (II) Mouse0: ps2EnableDataReporting: succeeded
[874594.546] (II) AIGLX: Suspending AIGLX clients for VT switch
[874598.307] (II) Open ACPI successful (/var/run/acpid.socket)
[874598.307] (II) AIGLX: Resuming AIGLX clients after VT switch
[874598.316] (II) intel(0): EDID vendor "LEN", prod id 16469
[874598.316] (II) intel(0): Printing DDC gathered Modelines:
[874598.316] (II) intel(0): Modeline "1920x1200"x0.0 167.80 1920 1968 2000 2298 1200 1203 1206 1217 -hsync -vsync (73.0 kHz)
[874598.316] (II) intel(0): Modeline "1920x1200"x0.0 134.28 1920 1968 2000 2208 1200 1202 1208 1220 -hsync -vsync (60.8 kHz)
[874598.653] (II) Mouse0: ps2EnableDataReporting: succeeded
[874603.667] (II) PM Event received: Capability Changed
[874603.667] I830PMEvent: Capability change
[874797.426] (II) 3rd Button detected: disabling emulate3Button
[924731.416] (II) PM Event received: Capability Changed
[924731.581] I830PMEvent: Capability change
[924746.522] (II) AIGLX: Suspending AIGLX clients for VT switch
[924750.810] (II) Open ACPI successful (/var/run/acpid.socket)
[924750.871] (II) AIGLX: Resuming AIGLX clients after VT switch
[924751.110] (II) intel(0): EDID vendor "LEN", prod id 16469
[924751.187] (II) intel(0): Printing DDC gathered Modelines:
[924751.187] (II) intel(0): Modeline "1920x1200"x0.0 167.80 1920 1968 2000 2298 1200 1203 1206 1217 -hsync -vsync (73.0 kHz)
[924751.187] (II) intel(0): Modeline "1920x1200"x0.0 134.28 1920 1968 2000 2208 1200 1202 1208 1220 -hsync -vsync (60.8 kHz)
[924751.574] (II) Mouse0: ps2EnableDataReporting: succeeded
[924811.154] (II) 3rd Button detected: disabling emulate3Button
[927498.896] (II) intel(0): EDID vendor "LEN", prod id 16469
[927498.913] (II) intel(0): Printing DDC gathered Modelines:
[927498.913] (II) intel(0): Modeline "1920x1200"x0.0 167.80 1920 1968 2000 2298 1200 1203 1206 1217 -hsync -vsync (73.0 kHz)
[927498.913] (II) intel(0): Modeline "1920x1200"x0.0 134.28 1920 1968 2000 2208 1200 1202 1208 1220 -hsync -vsync (60.8 kHz)
[927498.956] (II) intel(0): EDID vendor "LEN", prod id 16469
[927498.956] (II) intel(0): Printing DDC gathered Modelines:
[927498.956] (II) intel(0): Modeline "1920x1200"x0.0 167.80 1920 1968 2000 2298 1200 1203 1206 1217 -hsync -vsync (73.0 kHz)
[927498.956] (II) intel(0): Modeline "1920x1200"x0.0 134.28 1920 1968 2000 2208 1200 1202 1208 1220 -hsync -vsync (60.8 kHz)
[973322.323] (II) AIGLX: Suspending AIGLX clients for VT switch
[973326.095] (II) Open ACPI successful (/var/run/acpid.socket)
[973326.095] (II) AIGLX: Resuming AIGLX clients after VT switch
[973326.795] (II) intel(0): EDID vendor "LEN", prod id 16469
[973326.867] (II) intel(0): Printing DDC gathered Modelines:
[973326.881] (II) intel(0): Modeline "1920x1200"x0.0 167.80 1920 1968 2000 2298 1200 1203 1206 1217 -hsync -vsync (73.0 kHz)
[973326.881] (II) intel(0): Modeline "1920x1200"x0.0 134.28 1920 1968 2000 2208 1200 1202 1208 1220 -hsync -vsync (60.8 kHz)
[973327.347] (II) Mouse0: ps2EnableDataReporting: succeeded
[973791.556] (II) 3rd Button detected: disabling emulate3Button
[977013.451] (II) AIGLX: Suspending AIGLX clients for VT switch
[977017.663] (II) Open ACPI successful (/var/run/acpid.socket)
[977017.663] (II) AIGLX: Resuming AIGLX clients after VT switch
[977017.903] (II) intel(0): EDID vendor "LEN", prod id 16469
[977017.990] (II) intel(0): Printing DDC gathered Modelines:
[977017.990] (II) intel(0): Modeline "1920x1200"x0.0 167.80 1920 1968 2000 2298 1200 1203 1206 1217 -hsync -vsync (73.0 kHz)
[977017.990] (II) intel(0): Modeline "1920x1200"x0.0 134.28 1920 1968 2000 2208 1200 1202 1208 1220 -hsync -vsync (60.8 kHz)
[977018.423] (II) Mouse0: ps2EnableDataReporting: succeeded
[983341.451] (II) AIGLX: Suspending AIGLX clients for VT switch
[983345.874] (II) Open ACPI successful (/var/run/acpid.socket)
[983346.215] (II) AIGLX: Resuming AIGLX clients after VT switch
[983346.232] (II) intel(0): EDID vendor "LEN", prod id 16469
[983346.232] (II) intel(0): Printing DDC gathered Modelines:
[983346.232] (II) intel(0): Modeline "1920x1200"x0.0 167.80 1920 1968 2000 2298 1200 1203 1206 1217 -hsync -vsync (73.0 kHz)
[983346.232] (II) intel(0): Modeline "1920x1200"x0.0 134.28 1920 1968 2000 2208 1200 1202 1208 1220 -hsync -vsync (60.8 kHz)
[983346.688] (II) Mouse0: ps2EnableDataReporting: succeeded
[983351.601] (II) PM Event received: Capability Changed
[983351.601] I830PMEvent: Capability change
[983750.380] (II) 3rd Button detected: disabling emulate3Button
[1030584.925] (II) PM Event received: Capability Changed
[1030584.984] I830PMEvent: Capability change
[1060935.938] (II) AIGLX: Suspending AIGLX clients for VT switch
[1060939.752] (II) Open ACPI successful (/var/run/acpid.socket)
[1060939.752] (II) AIGLX: Resuming AIGLX clients after VT switch
[1060940.128] (II) intel(0): EDID vendor "LEN", prod id 16469
[1060940.174] (II) intel(0): Printing DDC gathered Modelines:
[1060940.174] (II) intel(0): Modeline "1920x1200"x0.0 167.80 1920 1968 2000 2298 1200 1203 1206 1217 -hsync -vsync (73.0 kHz)
[1060940.174] (II) intel(0): Modeline "1920x1200"x0.0 134.28 1920 1968 2000 2208 1200 1202 1208 1220 -hsync -vsync (60.8 kHz)
[1060940.590] (II) Mouse0: ps2EnableDataReporting: succeeded
[1060975.911] (II) 3rd Button detected: disabling emulate3Button
[1061120.291] (II) intel(0): EDID vendor "LEN", prod id 16469
[1061120.291] (II) intel(0): Printing DDC gathered Modelines:
[1061120.291] (II) intel(0): Modeline "1920x1200"x0.0 167.80 1920 1968 2000 2298 1200 1203 1206 1217 -hsync -vsync (73.0 kHz)
[1061120.292] (II) intel(0): Modeline "1920x1200"x0.0 134.28 1920 1968 2000 2208 1200 1202 1208 1220 -hsync -vsync (60.8 kHz)
[1064111.186] (II) AIGLX: Suspending AIGLX clients for VT switch
[1064114.667] (II) Open ACPI successful (/var/run/acpid.socket)
[1064114.667] (II) AIGLX: Resuming AIGLX clients after VT switch
[1064114.735] (II) intel(0): EDID vendor "LEN", prod id 16469
[1064114.908] (II) intel(0): Printing DDC gathered Modelines:
[1064114.908] (II) intel(0): Modeline "1920x1200"x0.0 167.80 1920 1968 2000 2298 1200 1203 1206 1217 -hsync -vsync (73.0 kHz)
[1064114.908] (II) intel(0): Modeline "1920x1200"x0.0 134.28 1920 1968 2000 2208 1200 1202 1208 1220 -hsync -vsync (60.8 kHz)
[1064115.250] (II) Mouse0: ps2EnableDataReporting: succeeded
[1066426.109] (II) AIGLX: Suspending AIGLX clients for VT switch
[1066429.767] (II) Open ACPI successful (/var/run/acpid.socket)
[1066429.767] (II) AIGLX: Resuming AIGLX clients after VT switch
[1066429.783] (II) intel(0): EDID vendor "LEN", prod id 16469
[1066429.783] (II) intel(0): Printing DDC gathered Modelines:
[1066429.783] (II) intel(0): Modeline "1920x1200"x0.0 167.80 1920 1968 2000 2298 1200 1203 1206 1217 -hsync -vsync (73.0 kHz)
[1066429.783] (II) intel(0): Modeline "1920x1200"x0.0 134.28 1920 1968 2000 2208 1200 1202 1208 1220 -hsync -vsync (60.8 kHz)
[1066430.113] (II) Mouse0: ps2EnableDataReporting: succeeded
[1092475.226] (II) 3rd Button detected: disabling emulate3Button
[1145483.054] (II) intel(0): EDID vendor "LEN", prod id 16469
[1145483.073] (II) intel(0): Printing DDC gathered Modelines:
[1145483.073] (II) intel(0): Modeline "1920x1200"x0.0 167.80 1920 1968 2000 2298 1200 1203 1206 1217 -hsync -vsync (73.0 kHz)
[1145483.073] (II) intel(0): Modeline "1920x1200"x0.0 134.28 1920 1968 2000 2208 1200 1202 1208 1220 -hsync -vsync (60.8 kHz)
[1145483.439] (II) intel(0): EDID vendor "LEN", prod id 16469
[1145483.439] (II) intel(0): Printing DDC gathered Modelines:
[1145483.439] (II) intel(0): Modeline "1920x1200"x0.0 167.80 1920 1968 2000 2298 1200 1203 1206 1217 -hsync -vsync (73.0 kHz)
[1145483.439] (II) intel(0): Modeline "1920x1200"x0.0 134.28 1920 1968 2000 2208 1200 1202 1208 1220 -hsync -vsync (60.8 kHz)
[1145483.506] (II) intel(0): EDID vendor "LEN", prod id 16469
[1145483.506] (II) intel(0): Printing DDC gathered Modelines:
[1145483.506] (II) intel(0): Modeline "1920x1200"x0.0 167.80 1920 1968 2000 2298 1200 1203 1206 1217 -hsync -vsync (73.0 kHz)
[1145483.506] (II) intel(0): Modeline "1920x1200"x0.0 134.28 1920 1968 2000 2208 1200 1202 1208 1220 -hsync -vsync (60.8 kHz)
[1145484.245] (II) intel(0): EDID vendor "LEN", prod id 16469
[1145484.246] (II) intel(0): Printing DDC gathered Modelines:
[1145484.246] (II) intel(0): Modeline "1920x1200"x0.0 167.80 1920 1968 2000 2298 1200 1203 1206 1217 -hsync -vsync (73.0 kHz)
[1145484.246] (II) intel(0): Modeline "1920x1200"x0.0 134.28 1920 1968 2000 2208 1200 1202 1208 1220 -hsync -vsync (60.8 kHz)
[1190240.285] (II) AIGLX: Suspending AIGLX clients for VT switch
[1190244.013] (II) Open ACPI successful (/var/run/acpid.socket)
[1190244.013] (II) AIGLX: Resuming AIGLX clients after VT switch
[1190245.857] (II) intel(0): EDID vendor "LEN", prod id 16469
[1190246.027] (II) intel(0): Printing DDC gathered Modelines:
[1190246.107] (II) intel(0): Modeline "1920x1200"x0.0 167.80 1920 1968 2000 2298 1200 1203 1206 1217 -hsync -vsync (73.0 kHz)
[1190246.107] (II) intel(0): Modeline "1920x1200"x0.0 134.28 1920 1968 2000 2208 1200 1202 1208 1220 -hsync -vsync (60.8 kHz)
[1190246.702] (II) Mouse0: ps2EnableDataReporting: succeeded
[1191231.841] (II) 3rd Button detected: disabling emulate3Button
[1240105.179] (II) AIGLX: Suspending AIGLX clients for VT switch
[1240109.234] (II) Open ACPI successful (/var/run/acpid.socket)
[1240109.234] (II) AIGLX: Resuming AIGLX clients after VT switch
[1240109.621] (II) intel(0): EDID vendor "LEN", prod id 16469
[1240109.684] (II) intel(0): Printing DDC gathered Modelines:
[1240109.684] (II) intel(0): Modeline "1920x1200"x0.0 167.80 1920 1968 2000 2298 1200 1203 1206 1217 -hsync -vsync (73.0 kHz)
[1240109.684] (II) intel(0): Modeline "1920x1200"x0.0 134.28 1920 1968 2000 2208 1200 1202 1208 1220 -hsync -vsync (60.8 kHz)
[1240110.091] (II) Mouse0: ps2EnableDataReporting: succeeded
[1240277.320] (II) 3rd Button detected: disabling emulate3Button
[1240624.693] (II) AIGLX: Suspending AIGLX clients for VT switch
[1240628.295] (II) Open ACPI successful (/var/run/acpid.socket)
[1240628.295] (II) AIGLX: Resuming AIGLX clients after VT switch
[1240628.307] (II) intel(0): EDID vendor "LEN", prod id 16469
[1240628.307] (II) intel(0): Printing DDC gathered Modelines:
[1240628.307] (II) intel(0): Modeline "1920x1200"x0.0 167.80 1920 1968 2000 2298 1200 1203 1206 1217 -hsync -vsync (73.0 kHz)
[1240628.307] (II) intel(0): Modeline "1920x1200"x0.0 134.28 1920 1968 2000 2208 1200 1202 1208 1220 -hsync -vsync (60.8 kHz)
[1240628.638] (II) Mouse0: ps2EnableDataReporting: succeeded
[1240661.617] (II) 3rd Button detected: disabling emulate3Button
[1241636.671] (II) AIGLX: Suspending AIGLX clients for VT switch
[1241640.595] (II) Open ACPI successful (/var/run/acpid.socket)
[1241640.595] (II) AIGLX: Resuming AIGLX clients after VT switch
[1241640.609] (II) intel(0): EDID vendor "LEN", prod id 16469
[1241640.609] (II) intel(0): Printing DDC gathered Modelines:
[1241640.609] (II) intel(0): Modeline "1920x1200"x0.0 167.80 1920 1968 2000 2298 1200 1203 1206 1217 -hsync -vsync (73.0 kHz)
[1241640.609] (II) intel(0): Modeline "1920x1200"x0.0 134.28 1920 1968 2000 2208 1200 1202 1208 1220 -hsync -vsync (60.8 kHz)
[1241640.944] (II) Mouse0: ps2EnableDataReporting: succeeded
[1268787.822] (II) AIGLX: Suspending AIGLX clients for VT switch
[1268791.566] (II) Open ACPI successful (/var/run/acpid.socket)
[1268791.566] (II) AIGLX: Resuming AIGLX clients after VT switch
[1268791.819] (II) intel(0): EDID vendor "LEN", prod id 16469
[1268791.883] (II) intel(0): Printing DDC gathered Modelines:
[1268791.883] (II) intel(0): Modeline "1920x1200"x0.0 167.80 1920 1968 2000 2298 1200 1203 1206 1217 -hsync -vsync (73.0 kHz)
[1268791.883] (II) intel(0): Modeline "1920x1200"x0.0 134.28 1920 1968 2000 2208 1200 1202 1208 1220 -hsync -vsync (60.8 kHz)
[1268792.208] (II) Mouse0: ps2EnableDataReporting: succeeded
[1268797.394] (II) PM Event received: Capability Changed
[1268797.394] I830PMEvent: Capability change
[1269192.178] (II) 3rd Button detected: disabling emulate3Button
[1273662.506] (II) PM Event received: Capability Changed
[1273662.506] I830PMEvent: Capability change
[1274897.561] (II) XKB: reuse xkmfile /var/lib/xkb/server-8CFD963B902874717C1A175903D64FC6B49C4433.xkm
[1315705.828] (II) AIGLX: Suspending AIGLX clients for VT switch
[1315710.458] (II) Open ACPI successful (/var/run/acpid.socket)
[1315711.340] (II) AIGLX: Resuming AIGLX clients after VT switch
[1315711.658] (II) intel(0): EDID vendor "LEN", prod id 16469
[1315711.851] (II) intel(0): Printing DDC gathered Modelines:
[1315711.851] (II) intel(0): Modeline "1920x1200"x0.0 167.80 1920 1968 2000 2298 1200 1203 1206 1217 -hsync -vsync (73.0 kHz)
[1315711.851] (II) intel(0): Modeline "1920x1200"x0.0 134.28 1920 1968 2000 2208 1200 1202 1208 1220 -hsync -vsync (60.8 kHz)
[1315712.351] (II) Mouse0: ps2EnableDataReporting: succeeded
[1317695.775] (II) 3rd Button detected: disabling emulate3Button
[1322935.862] (II) AIGLX: Suspending AIGLX clients for VT switch
[1322939.695] (II) Open ACPI successful (/var/run/acpid.socket)
[1322939.695] (II) AIGLX: Resuming AIGLX clients after VT switch
[1322941.555] (II) intel(0): EDID vendor "LEN", prod id 16469
[1322941.726] (II) intel(0): Printing DDC gathered Modelines:
[1322941.726] (II) intel(0): Modeline "1920x1200"x0.0 167.80 1920 1968 2000 2298 1200 1203 1206 1217 -hsync -vsync (73.0 kHz)
[1322941.726] (II) intel(0): Modeline "1920x1200"x0.0 134.28 1920 1968 2000 2208 1200 1202 1208 1220 -hsync -vsync (60.8 kHz)
[1322942.057] (II) Mouse0: ps2EnableDataReporting: succeeded
[1322944.365] (II) PM Event received: Capability Changed
[1322944.365] I830PMEvent: Capability change
[1323629.297] (II) AIGLX: Suspending AIGLX clients for VT switch
[1323632.754] (II) Open ACPI successful (/var/run/acpid.socket)
[1323632.754] (II) AIGLX: Resuming AIGLX clients after VT switch
[1323632.774] (II) intel(0): EDID vendor "LEN", prod id 16469
[1323632.774] (II) intel(0): Printing DDC gathered Modelines:
[1323632.774] (II) intel(0): Modeline "1920x1200"x0.0 167.80 1920 1968 2000 2298 1200 1203 1206 1217 -hsync -vsync (73.0 kHz)
[1323632.774] (II) intel(0): Modeline "1920x1200"x0.0 134.28 1920 1968 2000 2208 1200 1202 1208 1220 -hsync -vsync (60.8 kHz)
[1323633.103] (II) Mouse0: ps2EnableDataReporting: succeeded
[1323819.900] (II) AIGLX: Suspending AIGLX clients for VT switch
[1323823.386] (II) Open ACPI successful (/var/run/acpid.socket)
[1323823.386] (II) AIGLX: Resuming AIGLX clients after VT switch
[1323823.407] (II) intel(0): EDID vendor "LEN", prod id 16469
[1323823.407] (II) intel(0): Printing DDC gathered Modelines:
[1323823.407] (II) intel(0): Modeline "1920x1200"x0.0 167.80 1920 1968 2000 2298 1200 1203 1206 1217 -hsync -vsync (73.0 kHz)
[1323823.407] (II) intel(0): Modeline "1920x1200"x0.0 134.28 1920 1968 2000 2208 1200 1202 1208 1220 -hsync -vsync (60.8 kHz)
[1323823.769] (II) Mouse0: ps2EnableDataReporting: succeeded
[1324318.127] (II) 3rd Button detected: disabling emulate3Button
[1327737.644] (II) AIGLX: Suspending AIGLX clients for VT switch
[1327742.655] (II) Open ACPI successful (/var/run/acpid.socket)
[1327742.655] (II) AIGLX: Resuming AIGLX clients after VT switch
[1327742.668] (II) intel(0): EDID vendor "LEN", prod id 16469
[1327742.668] (II) intel(0): Printing DDC gathered Modelines:
[1327742.668] (II) intel(0): Modeline "1920x1200"x0.0 167.80 1920 1968 2000 2298 1200 1203 1206 1217 -hsync -vsync (73.0 kHz)
[1327742.668] (II) intel(0): Modeline "1920x1200"x0.0 134.28 1920 1968 2000 2208 1200 1202 1208 1220 -hsync -vsync (60.8 kHz)
[1327743.019] (II) Mouse0: ps2EnableDataReporting: succeeded
[1329190.925] (II) AIGLX: Suspending AIGLX clients for VT switch
[1329194.953] (II) Open ACPI successful (/var/run/acpid.socket)
[1329194.953] (II) AIGLX: Resuming AIGLX clients after VT switch
[1329195.084] (II) intel(0): EDID vendor "LEN", prod id 16469
[1329195.447] (II) intel(0): Printing DDC gathered Modelines:
[1329195.447] (II) intel(0): Modeline "1920x1200"x0.0 167.80 1920 1968 2000 2298 1200 1203 1206 1217 -hsync -vsync (73.0 kHz)
[1329195.447] (II) intel(0): Modeline "1920x1200"x0.0 134.28 1920 1968 2000 2208 1200 1202 1208 1220 -hsync -vsync (60.8 kHz)
[1329195.821] (II) Mouse0: ps2EnableDataReporting: succeeded
[1329521.836] (II) 3rd Button detected: disabling emulate3Button
[1387606.419] (II) AIGLX: Suspending AIGLX clients for VT switch
[1387610.200] (II) Open ACPI successful (/var/run/acpid.socket)
[1387610.200] (II) AIGLX: Resuming AIGLX clients after VT switch
[1387610.327] (II) intel(0): EDID vendor "LEN", prod id 16469
[1387610.365] (II) intel(0): Printing DDC gathered Modelines:
[1387610.365] (II) intel(0): Modeline "1920x1200"x0.0 167.80 1920 1968 2000 2298 1200 1203 1206 1217 -hsync -vsync (73.0 kHz)
[1387610.365] (II) intel(0): Modeline "1920x1200"x0.0 134.28 1920 1968 2000 2208 1200 1202 1208 1220 -hsync -vsync (60.8 kHz)
[1387610.798] (II) Mouse0: ps2EnableDataReporting: succeeded
[1387759.067] (II) AIGLX: Suspending AIGLX clients for VT switch
[1387762.849] (II) Open ACPI successful (/var/run/acpid.socket)
[1387762.850] (II) AIGLX: Resuming AIGLX clients after VT switch
[1387762.856] (II) intel(0): EDID vendor "LEN", prod id 16469
[1387762.856] (II) intel(0): Printing DDC gathered Modelines:
[1387762.856] (II) intel(0): Modeline "1920x1200"x0.0 167.80 1920 1968 2000 2298 1200 1203 1206 1217 -hsync -vsync (73.0 kHz)
[1387762.856] (II) intel(0): Modeline "1920x1200"x0.0 134.28 1920 1968 2000 2208 1200 1202 1208 1220 -hsync -vsync (60.8 kHz)
[1387763.193] (II) Mouse0: ps2EnableDataReporting: succeeded
[1387791.947] (II) AIGLX: Suspending AIGLX clients for VT switch
[1387795.608] (II) Open ACPI successful (/var/run/acpid.socket)
[1387795.608] (II) AIGLX: Resuming AIGLX clients after VT switch
[1387795.629] (II) intel(0): EDID vendor "LEN", prod id 16469
[1387795.657] (II) intel(0): Printing DDC gathered Modelines:
[1387795.657] (II) intel(0): Modeline "1920x1200"x0.0 167.80 1920 1968 2000 2298 1200 1203 1206 1217 -hsync -vsync (73.0 kHz)
[1387795.657] (II) intel(0): Modeline "1920x1200"x0.0 134.28 1920 1968 2000 2208 1200 1202 1208 1220 -hsync -vsync (60.8 kHz)
[1387795.993] (II) Mouse0: ps2EnableDataReporting: succeeded
[1387984.654] (II) 3rd Button detected: disabling emulate3Button
[1390272.403] (II) AIGLX: Suspending AIGLX clients for VT switch
[1390276.108] (II) Open ACPI successful (/var/run/acpid.socket)
[1390276.108] (II) AIGLX: Resuming AIGLX clients after VT switch
[1390276.125] (II) intel(0): EDID vendor "LEN", prod id 16469
[1390276.133] (II) intel(0): Printing DDC gathered Modelines:
[1390276.133] (II) intel(0): Modeline "1920x1200"x0.0 167.80 1920 1968 2000 2298 1200 1203 1206 1217 -hsync -vsync (73.0 kHz)
[1390276.133] (II) intel(0): Modeline "1920x1200"x0.0 134.28 1920 1968 2000 2208 1200 1202 1208 1220 -hsync -vsync (60.8 kHz)
[1390276.474] (II) Mouse0: ps2EnableDataReporting: succeeded
[1390819.144] (II) AIGLX: Suspending AIGLX clients for VT switch
[1390822.780] (II) Open ACPI successful (/var/run/acpid.socket)
[1390822.780] (II) AIGLX: Resuming AIGLX clients after VT switch
[1390822.788] (II) intel(0): EDID vendor "LEN", prod id 16469
[1390822.788] (II) intel(0): Printing DDC gathered Modelines:
[1390822.788] (II) intel(0): Modeline "1920x1200"x0.0 167.80 1920 1968 2000 2298 1200 1203 1206 1217 -hsync -vsync (73.0 kHz)
[1390822.788] (II) intel(0): Modeline "1920x1200"x0.0 134.28 1920 1968 2000 2208 1200 1202 1208 1220 -hsync -vsync (60.8 kHz)
[1390823.132] (II) Mouse0: ps2EnableDataReporting: succeeded
[1391079.401] (II) AIGLX: Suspending AIGLX clients for VT switch
[1391088.196] (II) Open ACPI successful (/var/run/acpid.socket)
[1391088.196] (II) AIGLX: Resuming AIGLX clients after VT switch
[1391088.202] (II) intel(0): EDID vendor "LEN", prod id 16469
[1391088.202] (II) intel(0): Printing DDC gathered Modelines:
[1391088.202] (II) intel(0): Modeline "1920x1200"x0.0 167.80 1920 1968 2000 2298 1200 1203 1206 1217 -hsync -vsync (73.0 kHz)
[1391088.202] (II) intel(0): Modeline "1920x1200"x0.0 134.28 1920 1968 2000 2208 1200 1202 1208 1220 -hsync -vsync (60.8 kHz)
[1391088.546] (II) Mouse0: ps2EnableDataReporting: succeeded
[1391181.112] (II) AIGLX: Suspending AIGLX clients for VT switch
[1391184.685] (II) Open ACPI successful (/var/run/acpid.socket)
[1391184.685] (II) AIGLX: Resuming AIGLX clients after VT switch
[1391184.708] (II) intel(0): EDID vendor "LEN", prod id 16469
[1391184.708] (II) intel(0): Printing DDC gathered Modelines:
[1391184.708] (II) intel(0): Modeline "1920x1200"x0.0 167.80 1920 1968 2000 2298 1200 1203 1206 1217 -hsync -vsync (73.0 kHz)
[1391184.708] (II) intel(0): Modeline "1920x1200"x0.0 134.28 1920 1968 2000 2208 1200 1202 1208 1220 -hsync -vsync (60.8 kHz)
[1391185.047] (II) Mouse0: ps2EnableDataReporting: succeeded
[1391209.119] (II) 3rd Button detected: disabling emulate3Button
[1391509.297] (II) AIGLX: Suspending AIGLX clients for VT switch
[1391513.502] (II) Open ACPI successful (/var/run/acpid.socket)
[1391513.502] (II) AIGLX: Resuming AIGLX clients after VT switch
[1391513.520] (II) intel(0): EDID vendor "LEN", prod id 16469
[1391513.520] (II) intel(0): Printing DDC gathered Modelines:
[1391513.520] (II) intel(0): Modeline "1920x1200"x0.0 167.80 1920 1968 2000 2298 1200 1203 1206 1217 -hsync -vsync (73.0 kHz)
[1391513.520] (II) intel(0): Modeline "1920x1200"x0.0 134.28 1920 1968 2000 2208 1200 1202 1208 1220 -hsync -vsync (60.8 kHz)
[1391513.871] (II) Mouse0: ps2EnableDataReporting: succeeded
[1392407.232] (II) 3rd Button detected: disabling emulate3Button
[1394990.446] (II) AIGLX: Suspending AIGLX clients for VT switch
[1394994.062] (II) Open ACPI successful (/var/run/acpid.socket)
[1394994.062] (II) AIGLX: Resuming AIGLX clients after VT switch
[1394994.078] (II) intel(0): EDID vendor "LEN", prod id 16469
[1394994.078] (II) intel(0): Printing DDC gathered Modelines:
[1394994.078] (II) intel(0): Modeline "1920x1200"x0.0 167.80 1920 1968 2000 2298 1200 1203 1206 1217 -hsync -vsync (73.0 kHz)
[1394994.078] (II) intel(0): Modeline "1920x1200"x0.0 134.28 1920 1968 2000 2208 1200 1202 1208 1220 -hsync -vsync (60.8 kHz)
[1394994.415] (II) Mouse0: ps2EnableDataReporting: succeeded
[1395073.711] (II) 3rd Button detected: disabling emulate3Button
[1403383.611] (II) AIGLX: Suspending AIGLX clients for VT switch
[1403387.204] (II) Open ACPI successful (/var/run/acpid.socket)
[1403387.204] (II) AIGLX: Resuming AIGLX clients after VT switch
[1403387.213] (II) intel(0): EDID vendor "LEN", prod id 16469
[1403387.213] (II) intel(0): Printing DDC gathered Modelines:
[1403387.213] (II) intel(0): Modeline "1920x1200"x0.0 167.80 1920 1968 2000 2298 1200 1203 1206 1217 -hsync -vsync (73.0 kHz)
[1403387.213] (II) intel(0): Modeline "1920x1200"x0.0 134.28 1920 1968 2000 2208 1200 1202 1208 1220 -hsync -vsync (60.8 kHz)
[1403387.572] (II) Mouse0: ps2EnableDataReporting: succeeded
[1425810.054] (II) AIGLX: Suspending AIGLX clients for VT switch
[1425830.515] (II) Open ACPI successful (/var/run/acpid.socket)
[1425830.515] (II) AIGLX: Resuming AIGLX clients after VT switch
[1425830.526] (II) intel(0): EDID vendor "LEN", prod id 16469
[1425830.593] (II) intel(0): Printing DDC gathered Modelines:
[1425830.958] (II) intel(0): Modeline "1920x1200"x0.0 167.80 1920 1968 2000 2298 1200 1203 1206 1217 -hsync -vsync (73.0 kHz)
[1425830.958] (II) intel(0): Modeline "1920x1200"x0.0 134.28 1920 1968 2000 2208 1200 1202 1208 1220 -hsync -vsync (60.8 kHz)
[1425831.286] (II) Mouse0: ps2EnableDataReporting: succeeded
[1425832.843] (II) PM Event received: Capability Changed
[1425832.843] I830PMEvent: Capability change
[1426080.886] (II) PM Event received: Capability Changed
[1426080.886] I830PMEvent: Capability change
[1426968.948] (II) 3rd Button detected: disabling emulate3Button
[1429731.886] (II) AIGLX: Suspending AIGLX clients for VT switch
[1429752.081] (II) Open ACPI successful (/var/run/acpid.socket)
[1429752.081] (II) AIGLX: Resuming AIGLX clients after VT switch
[1429752.087] (II) intel(0): EDID vendor "LEN", prod id 16469
[1429752.087] (II) intel(0): Printing DDC gathered Modelines:
[1429752.087] (II) intel(0): Modeline "1920x1200"x0.0 167.80 1920 1968 2000 2298 1200 1203 1206 1217 -hsync -vsync (73.0 kHz)
[1429752.087] (II) intel(0): Modeline "1920x1200"x0.0 134.28 1920 1968 2000 2208 1200 1202 1208 1220 -hsync -vsync (60.8 kHz)
[1429752.429] (II) Mouse0: ps2EnableDataReporting: succeeded
[1429981.089] (II) PM Event received: Capability Changed
[1429981.089] I830PMEvent: Capability change
[1430007.346] (II) PM Event received: Capability Changed
[1430007.346] I830PMEvent: Capability change
[1430037.092] (II) 3rd Button detected: disabling emulate3Button
[1434913.065] (II) AIGLX: Suspending AIGLX clients for VT switch
[1434933.118] (II) Open ACPI successful (/var/run/acpid.socket)
[1434933.118] (II) AIGLX: Resuming AIGLX clients after VT switch
[1434933.230] (II) intel(0): EDID vendor "LEN", prod id 16469
[1434933.536] (II) intel(0): Printing DDC gathered Modelines:
[1434933.536] (II) intel(0): Modeline "1920x1200"x0.0 167.80 1920 1968 2000 2298 1200 1203 1206 1217 -hsync -vsync (73.0 kHz)
[1434933.536] (II) intel(0): Modeline "1920x1200"x0.0 134.28 1920 1968 2000 2208 1200 1202 1208 1220 -hsync -vsync (60.8 kHz)
[1434933.969] (II) Mouse0: ps2EnableDataReporting: succeeded
[1436412.438] (II) PM Event received: Capability Changed
[1436412.438] I830PMEvent: Capability change
[1440676.270] (II) PM Event received: Capability Changed
[1440676.270] I830PMEvent: Capability change
[1440814.048] (II) 3rd Button detected: disabling emulate3Button
[1440938.793] (II) AIGLX: Suspending AIGLX clients for VT switch
[1440940.390] (II) Open ACPI successful (/var/run/acpid.socket)
[1440940.390] (II) AIGLX: Resuming AIGLX clients after VT switch
[1440940.406] (II) intel(0): EDID vendor "LEN", prod id 16469
[1440940.406] (II) intel(0): Printing DDC gathered Modelines:
[1440940.406] (II) intel(0): Modeline "1920x1200"x0.0 167.80 1920 1968 2000 2298 1200 1203 1206 1217 -hsync -vsync (73.0 kHz)
[1440940.406] (II) intel(0): Modeline "1920x1200"x0.0 134.28 1920 1968 2000 2208 1200 1202 1208 1220 -hsync -vsync (60.8 kHz)
[1440940.752] (II) Mouse0: ps2EnableDataReporting: succeeded
[1440949.594] (II) AIGLX: Suspending AIGLX clients for VT switch
[1441009.316] (II) Open ACPI successful (/var/run/acpid.socket)
[1441009.316] (II) AIGLX: Resuming AIGLX clients after VT switch
[1441009.333] (II) intel(0): EDID vendor "LEN", prod id 16469
[1441009.333] (II) intel(0): Printing DDC gathered Modelines:
[1441009.333] (II) intel(0): Modeline "1920x1200"x0.0 167.80 1920 1968 2000 2298 1200 1203 1206 1217 -hsync -vsync (73.0 kHz)
[1441009.333] (II) intel(0): Modeline "1920x1200"x0.0 134.28 1920 1968 2000 2208 1200 1202 1208 1220 -hsync -vsync (60.8 kHz)
[1441009.666] (II) Mouse0: ps2EnableDataReporting: succeeded
[1441174.343] (II) 3rd Button detected: disabling emulate3Button
[1480246.000] (II) PM Event received: Capability Changed
[1480246.084] I830PMEvent: Capability change
[1496205.209] (II) intel(0): EDID vendor "LEN", prod id 16469
[1496205.233] (II) intel(0): Printing DDC gathered Modelines:
[1496205.233] (II) intel(0): Modeline "1920x1200"x0.0 167.80 1920 1968 2000 2298 1200 1203 1206 1217 -hsync -vsync (73.0 kHz)
[1496205.233] (II) intel(0): Modeline "1920x1200"x0.0 134.28 1920 1968 2000 2208 1200 1202 1208 1220 -hsync -vsync (60.8 kHz)
[1496205.262] (II) intel(0): EDID vendor "LEN", prod id 16469
[1496205.262] (II) intel(0): Printing DDC gathered Modelines:
[1496205.263] (II) intel(0): Modeline "1920x1200"x0.0 167.80 1920 1968 2000 2298 1200 1203 1206 1217 -hsync -vsync (73.0 kHz)
[1496205.263] (II) intel(0): Modeline "1920x1200"x0.0 134.28 1920 1968 2000 2208 1200 1202 1208 1220 -hsync -vsync (60.8 kHz)
[1496593.969] (II) intel(0): EDID vendor "LEN", prod id 16469
[1496593.969] (II) intel(0): Printing DDC gathered Modelines:
[1496593.969] (II) intel(0): Modeline "1920x1200"x0.0 167.80 1920 1968 2000 2298 1200 1203 1206 1217 -hsync -vsync (73.0 kHz)
[1496593.969] (II) intel(0): Modeline "1920x1200"x0.0 134.28 1920 1968 2000 2208 1200 1202 1208 1220 -hsync -vsync (60.8 kHz)
[1496593.998] (II) intel(0): EDID vendor "LEN", prod id 16469
[1496593.998] (II) intel(0): Printing DDC gathered Modelines:
[1496593.998] (II) intel(0): Modeline "1920x1200"x0.0 167.80 1920 1968 2000 2298 1200 1203 1206 1217 -hsync -vsync (73.0 kHz)
[1496593.999] (II) intel(0): Modeline "1920x1200"x0.0 134.28 1920 1968 2000 2208 1200 1202 1208 1220 -hsync -vsync (60.8 kHz)
[1496682.530] (II) intel(0): EDID vendor "LEN", prod id 16469
[1496682.530] (II) intel(0): Printing DDC gathered Modelines:
[1496682.530] (II) intel(0): Modeline "1920x1200"x0.0 167.80 1920 1968 2000 2298 1200 1203 1206 1217 -hsync -vsync (73.0 kHz)
[1496682.530] (II) intel(0): Modeline "1920x1200"x0.0 134.28 1920 1968 2000 2208 1200 1202 1208 1220 -hsync -vsync (60.8 kHz)
[1496682.559] (II) intel(0): EDID vendor "LEN", prod id 16469
[1496682.559] (II) intel(0): Printing DDC gathered Modelines:
[1496682.559] (II) intel(0): Modeline "1920x1200"x0.0 167.80 1920 1968 2000 2298 1200 1203 1206 1217 -hsync -vsync (73.0 kHz)
[1496682.559] (II) intel(0): Modeline "1920x1200"x0.0 134.28 1920 1968 2000 2208 1200 1202 1208 1220 -hsync -vsync (60.8 kHz)
[1497445.627] (II) intel(0): EDID vendor "LEN", prod id 16469
[1497445.627] (II) intel(0): Printing DDC gathered Modelines:
[1497445.627] (II) intel(0): Modeline "1920x1200"x0.0 167.80 1920 1968 2000 2298 1200 1203 1206 1217 -hsync -vsync (73.0 kHz)
[1497445.627] (II) intel(0): Modeline "1920x1200"x0.0 134.28 1920 1968 2000 2208 1200 1202 1208 1220 -hsync -vsync (60.8 kHz)
[1497445.658] (II) intel(0): EDID vendor "LEN", prod id 16469
[1497445.658] (II) intel(0): Printing DDC gathered Modelines:
[1497445.658] (II) intel(0): Modeline "1920x1200"x0.0 167.80 1920 1968 2000 2298 1200 1203 1206 1217 -hsync -vsync (73.0 kHz)
[1497445.658] (II) intel(0): Modeline "1920x1200"x0.0 134.28 1920 1968 2000 2208 1200 1202 1208 1220 -hsync -vsync (60.8 kHz)
[1497985.921] (II) intel(0): EDID vendor "LEN", prod id 16469
[1497985.921] (II) intel(0): Printing DDC gathered Modelines:
[1497985.921] (II) intel(0): Modeline "1920x1200"x0.0 167.80 1920 1968 2000 2298 1200 1203 1206 1217 -hsync -vsync (73.0 kHz)
[1497985.921] (II) intel(0): Modeline "1920x1200"x0.0 134.28 1920 1968 2000 2208 1200 1202 1208 1220 -hsync -vsync (60.8 kHz)
[1497985.951] (II) intel(0): EDID vendor "LEN", prod id 16469
[1497985.951] (II) intel(0): Printing DDC gathered Modelines:
[1497985.951] (II) intel(0): Modeline "1920x1200"x0.0 167.80 1920 1968 2000 2298 1200 1203 1206 1217 -hsync -vsync (73.0 kHz)
[1497985.951] (II) intel(0): Modeline "1920x1200"x0.0 134.28 1920 1968 2000 2208 1200 1202 1208 1220 -hsync -vsync (60.8 kHz)
[1514424.017] (II) intel(0): EDID vendor "LEN", prod id 16469
[1514424.061] (II) intel(0): Printing DDC gathered Modelines:
[1514424.061] (II) intel(0): Modeline "1920x1200"x0.0 167.80 1920 1968 2000 2298 1200 1203 1206 1217 -hsync -vsync (73.0 kHz)
[1514424.072] (II) intel(0): Modeline "1920x1200"x0.0 134.28 1920 1968 2000 2208 1200 1202 1208 1220 -hsync -vsync (60.8 kHz)
[1514424.105] (II) intel(0): EDID vendor "LEN", prod id 16469
[1514424.105] (II) intel(0): Printing DDC gathered Modelines:
[1514424.105] (II) intel(0): Modeline "1920x1200"x0.0 167.80 1920 1968 2000 2298 1200 1203 1206 1217 -hsync -vsync (73.0 kHz)
[1514424.105] (II) intel(0): Modeline "1920x1200"x0.0 134.28 1920 1968 2000 2208 1200 1202 1208 1220 -hsync -vsync (60.8 kHz)
[1522370.089] (II) AIGLX: Suspending AIGLX clients for VT switch
[1522392.623] (II) Open ACPI successful (/var/run/acpid.socket)
[1522392.623] (II) AIGLX: Resuming AIGLX clients after VT switch
[1522392.693] (II) intel(0): EDID vendor "LEN", prod id 16469
[1522392.702] (II) intel(0): Printing DDC gathered Modelines:
[1522392.702] (II) intel(0): Modeline "1920x1200"x0.0 167.80 1920 1968 2000 2298 1200 1203 1206 1217 -hsync -vsync (73.0 kHz)
[1522392.702] (II) intel(0): Modeline "1920x1200"x0.0 134.28 1920 1968 2000 2208 1200 1202 1208 1220 -hsync -vsync (60.8 kHz)
[1522393.108] (II) Mouse0: ps2EnableDataReporting: succeeded
[1522470.956] (II) AIGLX: Suspending AIGLX clients for VT switch
[1522502.888] (II) Open ACPI successful (/var/run/acpid.socket)
[1522502.888] (II) AIGLX: Resuming AIGLX clients after VT switch
[1522502.940] (II) intel(0): EDID vendor "LEN", prod id 16469
[1522502.940] (II) intel(0): Printing DDC gathered Modelines:
[1522502.940] (II) intel(0): Modeline "1920x1200"x0.0 167.80 1920 1968 2000 2298 1200 1203 1206 1217 -hsync -vsync (73.0 kHz)
[1522502.940] (II) intel(0): Modeline "1920x1200"x0.0 134.28 1920 1968 2000 2208 1200 1202 1208 1220 -hsync -vsync (60.8 kHz)
[1522503.284] (II) Mouse0: ps2EnableDataReporting: succeeded
[1528476.006] (II) 3rd Button detected: disabling emulate3Button
[1535818.200] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.208] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.208] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.208] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.209] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.209] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.217] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.217] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.217] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.217] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.218] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.218] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.221] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.221] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.221] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.221] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.222] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.222] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.223] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.223] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.224] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.224] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.224] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.224] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.237] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.237] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.239] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.239] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.239] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.239] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.239] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.239] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.240] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.240] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.240] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.240] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.241] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.241] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.241] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.241] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.241] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.241] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.241] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.241] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.241] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.241] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.242] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.242] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.242] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.242] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.242] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.242] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.242] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.242] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.242] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.242] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.243] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.243] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.244] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.244] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.244] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.244] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.245] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.245] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.245] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.245] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.245] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.245] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.245] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.245] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.245] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.246] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.246] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.246] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.246] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.246] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.246] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.246] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.246] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.247] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.247] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.247] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.247] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.247] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.247] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.247] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.247] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.247] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.248] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.248] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.248] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.248] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.248] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.248] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.249] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.249] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.249] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.249] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.249] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.249] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.250] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.250] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.250] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.250] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.250] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.250] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.250] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.250] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.251] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.251] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.251] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.251] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.251] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.251] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.251] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.251] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.251] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.251] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.252] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.252] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.252] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.252] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.252] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.252] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.252] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.252] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.253] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.253] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.253] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.253] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.471] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.471] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.471] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.471] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.472] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.472] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.474] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.475] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.475] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.475] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.476] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.476] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.477] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.477] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.478] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.478] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.479] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.479] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.479] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.479] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.479] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.479] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.480] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.480] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.480] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.480] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.480] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.480] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.480] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.480] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.481] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.481] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.481] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.481] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.481] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.481] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.481] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.481] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.482] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.482] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.482] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.482] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.482] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.482] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.482] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.482] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.483] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.483] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.483] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.483] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.483] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.483] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.483] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.483] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.484] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.484] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.484] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.484] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.484] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.484] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.484] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.484] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.485] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.485] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.485] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.485] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.485] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.485] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.485] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.486] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.486] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.486] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.486] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.486] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.486] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.486] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.487] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.487] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.487] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.487] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.487] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.487] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.487] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.487] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.488] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.488] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.488] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.488] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.488] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.488] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.488] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.488] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.488] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.489] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.489] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.489] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.489] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.489] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.489] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.489] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.490] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.490] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.490] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.490] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.490] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.490] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.490] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.490] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.490] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.491] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.491] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.491] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.491] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.491] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.491] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.491] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.491] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.491] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.492] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.492] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.492] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.492] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.492] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.492] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.492] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.493] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.493] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.493] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.493] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.493] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.493] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.493] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.493] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.493] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.494] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.494] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.494] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.494] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.494] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.494] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.494] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.494] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.494] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.495] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.495] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.495] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.495] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.495] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.496] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.496] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.496] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.496] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.496] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.496] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.496] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.496] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.497] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.497] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.497] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.497] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.497] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.497] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.497] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.497] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.497] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.498] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.498] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.498] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.498] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.498] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.498] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.498] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.498] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.498] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.499] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.499] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.499] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.499] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.499] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.499] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.499] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.499] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.500] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.500] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.500] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.500] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.500] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.500] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.500] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.500] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.501] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.501] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.501] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.501] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.501] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.501] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.501] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.501] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.501] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.501] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.502] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.502] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.502] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.502] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.502] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.502] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.503] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.503] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.503] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.503] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.503] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.503] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.503] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.503] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.503] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.504] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.504] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.504] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.504] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.504] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.504] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.504] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.504] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.505] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.505] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.505] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.505] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.505] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.505] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.505] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.505] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.505] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.506] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.506] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.506] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.506] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.506] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.506] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.506] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.506] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.507] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.507] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.507] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.507] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.507] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.507] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.507] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.507] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.508] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.508] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.508] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.508] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.508] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.508] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.508] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.508] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.508] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.508] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.509] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.509] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.509] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.509] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.509] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.509] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.509] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.509] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.510] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.510] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.510] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.510] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.510] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.510] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.510] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.510] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.510] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.511] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.511] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.511] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.511] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.511] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.511] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.511] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.511] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.511] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.512] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.512] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.512] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.512] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.512] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[1535818.512] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
[-- Attachment #4: Type: text/plain, Size: 159 bytes --]
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
^ permalink raw reply [flat|nested] 8+ messages in thread* Re: More crashes with intel driver 1.10.4 and corrupted stack traces for GM45
2011-12-11 20:32 More crashes with intel driver 1.10.4 and corrupted stack traces for GM45 Marc MERLIN
@ 2011-12-13 22:13 ` Marc MERLIN
2011-12-13 23:04 ` Daniel Vetter
2011-12-13 23:16 ` More crashes with intel driver 1.10.4 and corrupted stack traces for GM45 Chris Wilson
0 siblings, 2 replies; 8+ messages in thread
From: Marc MERLIN @ 2011-12-13 22:13 UTC (permalink / raw)
To: intel-gfx
On Sun, Dec 11, 2011 at 12:32:00PM -0800, Marc MERLIN wrote:
> Hi Eugeni and other folks on this list,
Am I sending this to the wrong place or is GM45 unsupported?
Thanks,
Marc
> I reported some Xorg crashes on my lenovo W500.
> In the past, I thought it might have been virtualbox drivers, so I make
> sure I don't load them anymore.
>
> In the meantime, I upgraded to ubuntu oneiric.
>
> Kernel is 3.1.0:
> agpgart-intel 0000:00:00.0: Intel GM45 Chipset
> agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
> agpgart-intel 0000:00:00.0: detected 32768K stolen memory
> agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
>
> I have ulimit -c unlimited, so I do get cores.
>
> One of my X logs had some of these:
> [1535818.200] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.208] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.208] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
>
> Also, I seem to be getting X hangs from time to time where I have to restart
> enlightenment since my mouse cursor turns into a diagonal cross and I get trapped
> in the coordinates of my current window (killing and restarting e16 fixes this and it's
> a problem I never had with e16 until these recent X problems).
>
> Crashes happen every 2 weeks or so.
> I'm also happy to turn off advanced features that are likely to cause my problems
> if you can suggest some.
>
>
> First time I got:
> Reading symbols from /usr/bin/Xorg...(no debugging symbols found)...done.
> [New LWP 17995]
>
> warning: Can't read pathname for load map: Input/output error.
> [Thread debugging using libthread_db enabled]
> Core was generated by `/usr/bin/X :0 vt7 -nr -nolisten tcp -auth /var/run/xauth/A:0-J8HpXa'.
> Program terminated with signal 11, Segmentation fault.
> #0 0x0808266b in ?? ()
> (gdb) backtrace full
> #0 0x0808266b in ?? ()
> No symbol table info available.
> #1 0x0807fea0 in ProcUngrabKeyboard ()
> No symbol table info available.
> #2 0x08072117 in ?? ()
> No symbol table info available.
> #3 0x0806470c in ?? ()
> No symbol table info available.
> #4 0xb73d0113 in __libc_start_main (main=0x80643a0, argc=8,
> ubp_av=0xbfb63204, init=0x81d7100 <__libc_csu_init>,
> fini=0x81d7170 <__libc_csu_fini>, rtld_fini=0xb773ebc0,
> stack_end=0xbfb631fc) at libc-start.c:226
> result = <optimized out>
> unwind_buf = {cancel_jmp_buf = {{jmp_buf = {-1219301388, 0, 0, 0,
> 309354685, 68363436}, mask_was_saved = 0}}, priv = {pad = {
> 0x0, 0x0, 0x8, 0x8064a00}, data = {prev = 0x0, cleanup = 0x0,
> canceltype = 8}}}
> not_first_call = <optimized out>
> #5 0x08064a21 in _start ()
> No symbol table info available.
>
>
> Second time I got this in the kernel log:
> Xorg[22001]: segfault at 35d ip 0808266b sp bfb093e0 error 4 in Xorg[8048000+1e8000]
>
> Reading symbols from /usr/bin/Xorg...(no debugging symbols found)...done.
> [New LWP 22001]
>
> warning: Can't read pathname for load map: Input/output error.
> [Thread debugging using libthread_db enabled]
> Core was generated by `/usr/bin/X :0 vt7 -nr -nolisten tcp -auth /var/run/xauth/A:0-J8HpXa'.
> Program terminated with signal 11, Segmentation fault.
> #0 0x0808266b in ?? ()
> (gdb) backtrace full
> #0 0x0808266b in ?? ()
> No symbol table info available.
> #1 0x0807fea0 in ProcUngrabKeyboard ()
> No symbol table info available.
> #2 0x08072117 in ?? ()
> No symbol table info available.
> #3 0x0806470c in ?? ()
> No symbol table info available.
> #4 0xb7524113 in __libc_start_main (main=0x80643a0, argc=8,
> ubp_av=0xbfb095d4, init=0x81d7100 <__libc_csu_init>,
> fini=0x81d7170 <__libc_csu_fini>, rtld_fini=0xb7892bc0,
> stack_end=0xbfb095cc) at libc-start.c:226
> result = <optimized out>
> unwind_buf = {cancel_jmp_buf = {{jmp_buf = {-1217908748, 0, 0, 0,
> 556057159, -460331434}, mask_was_saved = 0}}, priv = {pad = {
> 0x0, 0x0, 0x8, 0x8064a00}, data = {prev = 0x0, cleanup = 0x0,
> canceltype = 8}}}
> not_first_call = <optimized out>
> #5 0x08064a21 in _start ()
> No symbol table info available.
>
>
> I installed debug symbols:
> /usr/lib/debug/usr/lib/libI810XvMC.so.1.0.0
> /usr/lib/debug/usr/lib/libIntelXvMC.so.1.0.0
> /usr/lib/debug/usr/lib/xorg
> /usr/lib/debug/usr/lib/xorg/modules
> /usr/lib/debug/usr/lib/xorg/modules/drivers
> /usr/lib/debug/usr/lib/xorg/modules/drivers/intel_drv.so
>
> But I'm not too sure how to get gdb to use them.
>
> Thanks for any help or suggestions.
> Marc
> --
> "A mouse is a device used to point at the xterm you want to type in" - A.S.R.
> Microsoft is to operating systems ....
> .... what McDonalds is to gourmet cooking
> Home page: http://marc.merlins.org/
> Section "ServerLayout"
> Identifier "X.org Configured"
> Screen 0 "Screen0" 0 0
> InputDevice "Mouse0" "CorePointer"
> InputDevice "Keyboard0" "CoreKeyboard"
> EndSection
>
> #Section "Files"
> # ModulePath "/usr/lib/xorg/modules"
> # FontPath "/usr/share/fonts/X11/misc"
> # FontPath "/usr/share/fonts/X11/100dpi/:unscaled"
> # FontPath "/usr/share/fonts/X11/75dpi/:unscaled"
> # FontPath "/usr/share/fonts/X11/Type1"
> # FontPath "/usr/share/fonts/X11/100dpi"
> # FontPath "/usr/share/fonts/X11/75dpi"
> # FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
> # FontPath "built-ins"
> #EndSection
>
> Section "Module"
> #Load "vnc"
> EndSection
>
> Section "InputDevice"
> Identifier "Keyboard0"
> Driver "kbd"
> Option "XkbRules" "xorg"
> Option "XkbModel" "pc105"
> Option "XkbLayout" "us"
> Option "XkbOptions" "terminate:ctrl_alt_bksp"
> EndSection
>
> # This is needed by the new dbus keyboard driver.
> Section "InputClass"
> Identifier "Keyboard Defaults"
> MatchIsKeyboard "yes"
> Option "XkbOptions" "terminate:ctrl_alt_bksp"
> EndSection
>
>
> Section "InputDevice"
> Identifier "Mouse0"
> Driver "mouse"
> Option "Protocol" "auto"
> Option "Device" "/dev/input/mice"
> Option "ZAxisMapping" "4 5 6 7"
> EndSection
>
> Section "Monitor"
> Identifier "Monitor0"
> VendorName "Monitor Vendor"
> ModelName "Monitor Model"
> EndSection
>
> #Section "Device"
> # Identifier "ATI Radeon r6xx"
> # #Driver "radeon"
> # # radeonhd / exa buggy with 3D in 1.2.5 driver still
> # Driver "radeonhd"
> # Busid "PCI:1:0:0"
> # # better EXA is default now
> # Option "AccelMethod" "exa"
> # #Option "AccelMethod" "xaa"
> # Option "DRI" "true"
> # Enabling KMS may break X.org drivers that are not KMS-ready, for instance
> # radeonhd or vesa.
> #
> # In case of trouble KMS can be disabled with the 'nomodeset' kernel
> # command line parameter, or by editing /etc/modprobe.d/radeon-kms.conf.
> #
> #EndSection
> #
> #
> Section "Device"
> ### Available Driver options are:-
> ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
> ### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
> ### [arg]: arg optional
> #Option "NoAccel" # [<bool>]
> #Option "SWcursor" # [<bool>]
> #Option "ColorKey" # <i>
> #Option "CacheLines" # <i>
> #Option "Dac6Bit" # [<bool>]
> #Option "DRI" # [<bool>]
> #Option "NoDDC" # [<bool>]
> #Option "ShowCache" # [<bool>]
> #Option "XvMCSurfaces" # <i>
> #Option "PageFlip" # [<bool>]
> Identifier "Intel GM45"
> Driver "intel"
> VendorName "Intel Corporation"
> BoardName "Mobile 4 Series Chipset Integrated Graphics Controller"
> EndSection
>
>
>
> Section "Screen"
> Identifier "Screen0"
> Device "Card0"
> Monitor "Monitor0"
> # SubSection "Display"
> # Viewport 0 0
> # Depth 1
> # EndSubSection
> # SubSection "Display"
> # Viewport 0 0
> # Depth 4
> # EndSubSection
> # SubSection "Display"
> # Viewport 0 0
> # Depth 8
> # EndSubSection
> # SubSection "Display"
> # Viewport 0 0
> # Depth 15
> # EndSubSection
> # SubSection "Display"
> # Viewport 0 0
> # Depth 16
> # EndSubSection
> SubSection "Display"
> Viewport 0 0
> Depth 24
> EndSubSection
> EndSection
>
> # Custom
>
> Section "DRI"
> Mode 0666
> EndSection
>
> Section "ServerFlags"
> # Option "AIGLX" "on"
> # this would disable hotplugging that creates this:
> # (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
> # (WW) Disabling Mouse0
> # (WW) Disabling Keyboard0
> # More info here: https://wiki.archlinux.org/index.php/Xorg#Disabling_Input_Hot-plugging
> Option "AutoAddDevices" "False"
> # https://wiki.ubuntu.com/X/Backtracing
> Option "NoTrapSignals" "true"
> #For instance, to start Xorg from within gdb (over a ssh connection), start gdb:
>
> #sudo gdb /usr/bin/Xorg 2>&1 | tee gdb-Xorg.txt
>
> #inside gdm, start up Xorg:
>
> #(gdb) run -keeptty -dumbSched
> EndSection
>
> Section "Extensions"
> # Option "Composite" "Enable"
> EndSection
> [794061.118]
> X.Org X Server 1.10.4
> Release Date: 2011-08-19
> [794061.118] X Protocol Version 11, Revision 0
> [794061.118] Build Operating System: Linux 2.6.24-29-server i686 Ubuntu
> [794061.118] Current Operating System: Linux gandalfthegrey.merlins.org 3.1.0-core2-volpreempt-noide-hm64-20111109 #1 SMP Wed Nov 9 09:10:19 PST 2011 i686
> [794061.118] Kernel command line: auto BOOT_IMAGE=linux ro root=/dev/mapper/cryptroot panic=20 resume=/dev/sda7 usbcore.autosuspend=1 noplymouth INIT_VERBOSE=yes i915.modeset=1 pcie_aspm=force
> [794061.118] Build Date: 19 October 2011 05:09:41AM
> [794061.118] xorg-server 2:1.10.4-1ubuntu4.2 (For technical support please see http://www.ubuntu.com/support)
> [794061.118] Current version of pixman: 0.22.2
> [794061.118] Before reporting problems, check http://wiki.x.org
> to make sure that you have the latest version.
> [794061.118] Markers: (--) probed, (**) from config file, (==) default setting,
> (++) from command line, (!!) notice, (II) informational,
> (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
> [794061.118] (==) Log file: "/var/log/Xorg.0.log", Time: Tue Nov 29 07:57:38 2011
> [794061.196] (==) Using config file: "/etc/X11/xorg.conf"
> [794061.196] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
> [794061.334] (==) ServerLayout "X.org Configured"
> [794061.334] (**) |-->Screen "Screen0" (0)
> [794061.334] (**) | |-->Monitor "Monitor0"
> [794061.334] (==) No device specified for screen "Screen0".
> Using the first device section listed.
> [794061.334] (**) | |-->Device "Intel GM45"
> [794061.334] (**) |-->Input Device "Mouse0"
> [794061.334] (**) |-->Input Device "Keyboard0"
> [794061.334] (**) Option "NoTrapSignals" "true"
> [794061.334] (**) Option "AIGLX" "on"
> [794061.334] (**) Option "AutoAddDevices" "False"
> [794061.334] (**) Not automatically adding devices
> [794061.334] (==) Automatically enabling devices
> [794061.677] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
> [794061.677] Entry deleted from font path.
> [794061.820] (==) FontPath set to:
> /usr/share/fonts/X11/misc,
> /usr/share/fonts/X11/100dpi/:unscaled,
> /usr/share/fonts/X11/75dpi/:unscaled,
> /usr/share/fonts/X11/Type1,
> /usr/share/fonts/X11/100dpi,
> /usr/share/fonts/X11/75dpi,
> /var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
> built-ins
> [794061.820] (==) ModulePath set to "/usr/lib/i386-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
> [794061.820] (**) Extension "Composite" is enabled
> [794061.820] (II) Loader magic: 0x823ada0
> [794061.820] (II) Module ABI versions:
> [794061.820] X.Org ANSI C Emulation: 0.4
> [794061.820] X.Org Video Driver: 10.0
> [794061.820] X.Org XInput driver : 12.3
> [794061.820] X.Org Server Extension : 5.0
> [794061.823] (--) PCI:*(0:0:2:0) 8086:2a42:17aa:2114 rev 7, Mem @ 0xf4400000/4194304, 0xd0000000/268435456, I/O @ 0x00001800/8
> [794061.823] (--) PCI: (0:0:2:1) 8086:2a43:17aa:2114 rev 7, Mem @ 0xf4200000/1048576
> [794061.823] (II) Open ACPI successful (/var/run/acpid.socket)
> [794061.823] (II) "extmod" will be loaded by default.
> [794061.824] (II) "dbe" will be loaded by default.
> [794061.824] (II) "glx" will be loaded by default.
> [794061.824] (II) "record" will be loaded by default.
> [794061.824] (II) "dri" will be loaded by default.
> [794061.824] (II) "dri2" will be loaded by default.
> [794061.824] (II) LoadModule: "extmod"
> [794062.161] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
> [794062.161] (II) Module extmod: vendor="X.Org Foundation"
> [794062.161] compiled for 1.10.4, module version = 1.0.0
> [794062.161] Module class: X.Org Server Extension
> [794062.161] ABI class: X.Org Server Extension, version 5.0
> [794062.161] (II) Loading extension MIT-SCREEN-SAVER
> [794062.161] (II) Loading extension XFree86-VidModeExtension
> [794062.161] (II) Loading extension XFree86-DGA
> [794062.161] (II) Loading extension DPMS
> [794062.161] (II) Loading extension XVideo
> [794062.161] (II) Loading extension XVideo-MotionCompensation
> [794062.161] (II) Loading extension X-Resource
> [794062.161] (II) LoadModule: "dbe"
> [794062.162] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
> [794062.187] (II) Module dbe: vendor="X.Org Foundation"
> [794062.187] compiled for 1.10.4, module version = 1.0.0
> [794062.187] Module class: X.Org Server Extension
> [794062.187] ABI class: X.Org Server Extension, version 5.0
> [794062.187] (II) Loading extension DOUBLE-BUFFER
> [794062.187] (II) LoadModule: "glx"
> [794062.187] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
> [794062.248] (II) Module glx: vendor="X.Org Foundation"
> [794062.248] compiled for 1.10.4, module version = 1.0.0
> [794062.248] ABI class: X.Org Server Extension, version 5.0
> [794062.249] (**) AIGLX enabled
> [794062.249] (II) Loading extension GLX
> [794062.249] (II) LoadModule: "record"
> [794062.249] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
> [794062.257] (II) Module record: vendor="X.Org Foundation"
> [794062.257] compiled for 1.10.4, module version = 1.13.0
> [794062.257] Module class: X.Org Server Extension
> [794062.257] ABI class: X.Org Server Extension, version 5.0
> [794062.257] (II) Loading extension RECORD
> [794062.257] (II) LoadModule: "dri"
> [794062.257] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
> [794062.268] (II) Module dri: vendor="X.Org Foundation"
> [794062.268] compiled for 1.10.4, module version = 1.0.0
> [794062.268] ABI class: X.Org Server Extension, version 5.0
> [794062.268] (II) Loading extension XFree86-DRI
> [794062.268] (II) LoadModule: "dri2"
> [794062.269] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
> [794062.277] (II) Module dri2: vendor="X.Org Foundation"
> [794062.277] compiled for 1.10.4, module version = 1.2.0
> [794062.277] ABI class: X.Org Server Extension, version 5.0
> [794062.277] (II) Loading extension DRI2
> [794062.277] (II) LoadModule: "intel"
> [794062.277] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
> [794062.378] (II) Module intel: vendor="X.Org Foundation"
> [794062.378] compiled for 1.10.2.902, module version = 2.15.901
> [794062.378] Module class: X.Org Video Driver
> [794062.378] ABI class: X.Org Video Driver, version 10.0
> [794062.378] (II) LoadModule: "mouse"
> [794062.378] (II) Loading /usr/lib/xorg/modules/input/mouse_drv.so
> [794062.391] (II) Module mouse: vendor="X.Org Foundation"
> [794062.391] compiled for 1.10.2.902, module version = 1.7.1
> [794062.391] Module class: X.Org XInput Driver
> [794062.391] ABI class: X.Org XInput driver, version 12.3
> [794062.391] (II) LoadModule: "kbd"
> [794062.391] (II) Loading /usr/lib/xorg/modules/input/kbd_drv.so
> [794062.405] (II) Module kbd: vendor="X.Org Foundation"
> [794062.405] compiled for 1.10.2, module version = 1.6.0
> [794062.405] Module class: X.Org XInput Driver
> [794062.405] ABI class: X.Org XInput driver, version 12.3
> [794062.405] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
> i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
> E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
> 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
> 4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
> Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
> Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
> Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
> Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
> Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server
> [794062.405] (++) using VT number 7
>
> [794063.043] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
> [794063.043] drmOpenDevice: node name is /dev/dri/card0
> [794063.043] drmOpenDevice: open result is 9, (OK)
> [794063.043] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
> [794063.043] drmOpenDevice: node name is /dev/dri/card0
> [794063.043] drmOpenDevice: open result is 9, (OK)
> [794063.043] drmOpenByBusid: drmOpenMinor returns 9
> [794063.043] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
> [794063.043] (==) intel(0): Depth 24, (--) framebuffer bpp 32
> [794063.043] (==) intel(0): RGB weight 888
> [794063.043] (==) intel(0): Default visual is TrueColor
> [794063.043] (II) intel(0): Integrated Graphics Chipset: Intel(R) GM45
> [794063.043] (--) intel(0): Chipset: "GM45"
> [794063.043] (**) intel(0): Relaxed fencing enabled
> [794063.043] (**) intel(0): Wait on SwapBuffers? enabled
> [794063.043] (**) intel(0): Triple buffering? enabled
> [794063.043] (**) intel(0): Framebuffer tiled
> [794063.043] (**) intel(0): Pixmaps tiled
> [794063.043] (**) intel(0): 3D buffers tiled
> [794063.043] (**) intel(0): SwapBuffers wait enabled
> [794063.043] (==) intel(0): video overlay key set to 0x101fe
> [794063.043] (II) intel(0): Output LVDS1 using monitor section Monitor0
> [794063.044] (II) intel(0): found backlight control interface /sys/class/backlight/acpi_video0
> [794063.058] (II) intel(0): Output VGA1 has no monitor section
> [794063.070] (II) intel(0): Output DP1 has no monitor section
> [794063.070] (II) intel(0): EDID for output LVDS1
> [794063.070] (II) intel(0): Manufacturer: LEN Model: 4055 Serial#: 0
> [794063.070] (II) intel(0): Year: 2007 Week: 0
> [794063.070] (II) intel(0): EDID Version: 1.3
> [794063.070] (II) intel(0): Digital Display Input
> [794063.070] (II) intel(0): Max Image Size [cm]: horiz.: 33 vert.: 21
> [794063.070] (II) intel(0): Gamma: 2.20
> [794063.070] (II) intel(0): DPMS capabilities: StandBy Suspend Off
> [794063.070] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
> [794063.070] (II) intel(0): First detailed timing is preferred mode
> [794063.070] (II) intel(0): redX: 0.580 redY: 0.340 greenX: 0.310 greenY: 0.550
> [794063.070] (II) intel(0): blueX: 0.155 blueY: 0.155 whiteX: 0.313 whiteY: 0.329
> [794063.070] (II) intel(0): Manufacturer's mask: 0
> [794063.070] (II) intel(0): Supported detailed timing:
> [794063.070] (II) intel(0): clock: 167.8 MHz Image Size: 331 x 207 mm
> [794063.070] (II) intel(0): h_active: 1920 h_sync: 1968 h_sync_end 2000 h_blank_end 2298 h_border: 0
> [794063.070] (II) intel(0): v_active: 1200 v_sync: 1203 v_sync_end 1206 v_blanking: 1217 v_border: 0
> [794063.071] (II) intel(0): Supported detailed timing:
> [794063.071] (II) intel(0): clock: 134.3 MHz Image Size: 331 x 207 mm
> [794063.071] (II) intel(0): h_active: 1920 h_sync: 1968 h_sync_end 2000 h_blank_end 2208 h_border: 0
> [794063.071] (II) intel(0): v_active: 1200 v_sync: 1202 v_sync_end 1208 v_blanking: 1220 v_border: 0
> [794063.071] (II) intel(0): Unknown vendor-specific block f
> [794063.071] (II) intel(0): LTN154U2-L05
> [794063.071] (II) intel(0): EDID (in hex):
> [794063.071] (II) intel(0): 00ffffffffffff0030ae554000000000
> [794063.071] (II) intel(0): 0011010380211578ea87f594574f8c27
> [794063.071] (II) intel(0): 27505400000001010101010101010101
> [794063.071] (II) intel(0): 0101010101018c41807a71b011403020
> [794063.071] (II) intel(0): 33004bcf100000197434802071b01440
> [794063.071] (II) intel(0): 302026004bcf100000190000000f00d1
> [794063.071] (II) intel(0): 0a32d10a281101004ca35532000000fe
> [794063.071] (II) intel(0): 004c544e31353455322d4c30350a0011
> [794063.071] (II) intel(0): EDID vendor "LEN", prod id 16469
> [794063.071] (II) intel(0): Printing DDC gathered Modelines:
> [794063.071] (II) intel(0): Modeline "1920x1200"x0.0 167.80 1920 1968 2000 2298 1200 1203 1206 1217 -hsync -vsync (73.0 kHz)
> [794063.071] (II) intel(0): Modeline "1920x1200"x0.0 134.28 1920 1968 2000 2208 1200 1202 1208 1220 -hsync -vsync (60.8 kHz)
> [794063.072] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
> [794063.072] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
> [794063.072] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
> [794063.072] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
> [794063.072] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
> [794063.072] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
> [794063.072] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
> [794063.072] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
> [794063.072] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
> [794063.072] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
> [794063.072] (II) intel(0): Not using default mode "576x432" (doublescan mode not supported)
> [794063.072] (II) intel(0): Not using default mode "680x384" (doublescan mode not supported)
> [794063.072] (II) intel(0): Not using default mode "680x384" (doublescan mode not supported)
> [794063.072] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
> [794063.072] (II) intel(0): Not using default mode "720x450" (doublescan mode not supported)
> [794063.072] (II) intel(0): Not using default mode "800x512" (doublescan mode not supported)
> [794063.072] (II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
> [794063.072] (II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
> [794063.072] (II) intel(0): Not using default mode "960x540" (doublescan mode not supported)
> [794063.072] (II) intel(0): Not using default mode "960x600" (doublescan mode not supported)
> [794063.072] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
> [794063.072] (II) intel(0): Printing probed modes for output LVDS1
> [794063.072] (II) intel(0): Modeline "1920x1200"x60.0 167.80 1920 1968 2000 2298 1200 1203 1206 1217 -hsync -vsync (73.0 kHz)
> [794063.072] (II) intel(0): Modeline "1920x1200"x60.0 154.00 1920 1968 2000 2080 1200 1203 1209 1235 +hsync -vsync (74.0 kHz)
> [794063.072] (II) intel(0): Modeline "1920x1200"x49.8 134.28 1920 1968 2000 2208 1200 1202 1208 1220 -hsync -vsync (60.8 kHz)
> [794063.072] (II) intel(0): Modeline "1920x1080"x59.9 138.50 1920 1968 2000 2080 1080 1083 1088 1111 +hsync -vsync (66.6 kHz)
> [794063.073] (II) intel(0): Modeline "1600x1200"x60.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz)
> [794063.073] (II) intel(0): Modeline "1680x1050"x60.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
> [794063.073] (II) intel(0): Modeline "1680x1050"x59.9 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz)
> [794063.073] (II) intel(0): Modeline "1600x1024"x60.2 103.12 1600 1600 1656 1664 1024 1024 1029 1030 +hsync +vsync (62.0 kHz)
> [794063.073] (II) intel(0): Modeline "1400x1050"x60.0 122.00 1400 1488 1640 1880 1050 1052 1064 1082 +hsync +vsync (64.9 kHz)
> [794063.073] (II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
> [794063.073] (II) intel(0): Modeline "1440x900"x59.9 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz)
> [794063.073] (II) intel(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
> [794063.073] (II) intel(0): Modeline "1360x768"x59.8 84.75 1360 1432 1568 1776 768 771 781 798 -hsync +vsync (47.7 kHz)
> [794063.073] (II) intel(0): Modeline "1360x768"x60.0 72.00 1360 1408 1440 1520 768 771 781 790 +hsync -vsync (47.4 kHz)
> [794063.073] (II) intel(0): Modeline "1152x864"x60.0 81.62 1152 1216 1336 1520 864 865 868 895 -hsync +vsync (53.7 kHz)
> [794063.073] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
> [794063.073] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
> [794063.073] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
> [794063.073] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
> [794063.089] (II) intel(0): EDID for output VGA1
> [794063.101] (II) intel(0): EDID for output DP1
> [794063.101] (II) intel(0): Output LVDS1 connected
> [794063.101] (II) intel(0): Output VGA1 disconnected
> [794063.101] (II) intel(0): Output DP1 disconnected
> [794063.101] (II) intel(0): Using exact sizes for initial modes
> [794063.101] (II) intel(0): Output LVDS1 using initial mode 1920x1200
> [794063.101] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
> [794063.101] (II) intel(0): Kernel page flipping support detected, enabling
> [794063.101] (**) intel(0): Display dimensions: (330, 210) mm
> [794063.101] (**) intel(0): DPI set to (147, 145)
> [794063.101] (II) Loading sub module "fb"
> [794063.101] (II) LoadModule: "fb"
> [794063.102] (II) Loading /usr/lib/xorg/modules/libfb.so
> [794063.121] (II) Module fb: vendor="X.Org Foundation"
> [794063.121] compiled for 1.10.4, module version = 1.0.0
> [794063.121] ABI class: X.Org ANSI C Emulation, version 0.4
> [794063.122] (II) Loading sub module "dri2"
> [794063.122] (II) LoadModule: "dri2"
> [794063.123] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
> [794063.123] (II) Module dri2: vendor="X.Org Foundation"
> [794063.123] compiled for 1.10.4, module version = 1.2.0
> [794063.123] ABI class: X.Org Server Extension, version 5.0
> [794063.123] (==) Depth 24 pixmap format is 32 bpp
> [794063.133] (II) intel(0): [DRI2] Setup complete
> [794063.133] (II) intel(0): [DRI2] DRI driver: i965
> [794063.133] (II) intel(0): Allocated new frame buffer 1920x1200 stride 7680, tiled
> [794063.142] (II) UXA(0): Driver registered support for the following operations:
> [794063.142] (II) solid
> [794063.142] (II) copy
> [794063.142] (II) composite (RENDER acceleration)
> [794063.142] (II) put_image
> [794063.142] (II) get_image
> [794063.142] (==) intel(0): Backing store disabled
> [794063.142] (==) intel(0): Silken mouse enabled
> [794063.142] (II) intel(0): Initializing HW Cursor
> [794063.167] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
> [794063.170] (==) intel(0): DPMS enabled
> [794063.170] (==) intel(0): Intel XvMC decoder enabled
> [794063.170] (II) intel(0): Set up textured video
> [794063.179] (II) intel(0): [XvMC] xvmc_vld driver initialized.
> [794063.179] (II) intel(0): direct rendering: DRI2 Enabled
> [794063.179] (==) intel(0): hotplug detection: "enabled"
> [794063.179] (--) RandR disabled
> [794063.179] (II) Initializing built-in extension Generic Event Extension
> [794063.179] (II) Initializing built-in extension SHAPE
> [794063.179] (II) Initializing built-in extension MIT-SHM
> [794063.179] (II) Initializing built-in extension XInputExtension
> [794063.179] (II) Initializing built-in extension XTEST
> [794063.179] (II) Initializing built-in extension BIG-REQUESTS
> [794063.179] (II) Initializing built-in extension SYNC
> [794063.179] (II) Initializing built-in extension XKEYBOARD
> [794063.179] (II) Initializing built-in extension XC-MISC
> [794063.179] (II) Initializing built-in extension SECURITY
> [794063.179] (II) Initializing built-in extension XINERAMA
> [794063.179] (II) Initializing built-in extension XFIXES
> [794063.179] (II) Initializing built-in extension RENDER
> [794063.179] (II) Initializing built-in extension RANDR
> [794063.179] (II) Initializing built-in extension COMPOSITE
> [794063.179] (II) Initializing built-in extension DAMAGE
> [794063.179] (II) Initializing built-in extension GESTURE
> [794063.188] (II) AIGLX: Trying DRI driver /usr/lib/i386-linux-gnu/dri/i965_dri.so
> [794063.316] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
> [794063.316] (II) AIGLX: enabled GLX_INTEL_swap_event
> [794063.316] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
> [794063.316] (II) AIGLX: enabled GLX_SGI_make_current_read
> [794063.316] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
> [794063.316] (II) AIGLX: Loaded and initialized i965
> [794063.316] (II) GLX: Initialized DRI2 GL provider for screen 0
> [794063.317] (II) intel(0): Setting screen physical size to 507 x 317
> [794063.487] (II) XKB: reuse xkmfile /var/lib/xkb/server-02D8252E59564A234380F1E5417646A9DB3B7452.xkm
> [794063.513] (II) Using input driver 'mouse' for 'Mouse0'
> [794063.513] (II) Loading /usr/lib/xorg/modules/input/mouse_drv.so
> [794063.513] (**) Option "CorePointer"
> [794063.513] (**) Mouse0: always reports core events
> [794063.513] (**) Option "Protocol" "auto"
> [794063.513] (**) Option "Device" "/dev/input/mice"
> [794063.513] (II) Mouse0: Setting mouse protocol to "ExplorerPS/2"
> [794063.513] (**) Mouse0: Protocol: "auto"
> [794063.513] (**) Mouse0: always reports core events
> [794063.514] (==) Mouse0: Emulate3Buttons, Emulate3Timeout: 50
> [794063.514] (**) Option "ZAxisMapping" "4 5 6 7"
> [794063.514] (**) Mouse0: ZAxisMapping: buttons 4, 5, 6 and 7
> [794063.514] (**) Mouse0: Buttons: 11
> [794063.514] (II) XINPUT: Adding extended input device "Mouse0" (type: MOUSE)
> [794063.514] (**) Mouse0: (accel) keeping acceleration scheme 1
> [794063.514] (**) Mouse0: (accel) acceleration profile 0
> [794063.514] (**) Mouse0: (accel) acceleration factor: 2.000
> [794063.514] (**) Mouse0: (accel) acceleration threshold: 4
> [794063.514] (II) Mouse0: Setting mouse protocol to "ExplorerPS/2"
> [794063.808] (II) Mouse0: ps2EnableDataReporting: succeeded
> [794063.808] (II) Using input driver 'kbd' for 'Keyboard0'
> [794063.808] (II) Loading /usr/lib/xorg/modules/input/kbd_drv.so
> [794063.808] (**) Option "CoreKeyboard"
> [794063.808] (**) Keyboard0: always reports core events
> [794063.808] (**) Keyboard0: always reports core events
> [794063.808] (**) Option "Protocol" "standard"
> [794063.808] (**) Option "XkbRules" "xorg"
> [794063.808] (**) Option "XkbModel" "pc105"
> [794063.808] (**) Option "XkbLayout" "us"
> [794063.808] (**) Option "XkbOptions" "terminate:ctrl_alt_bksp"
> [794063.808] (II) XINPUT: Adding extended input device "Keyboard0" (type: KEYBOARD)
> [794063.819] (II) XKB: reuse xkmfile /var/lib/xkb/server-E6715BBB0C6029B8A19B43D2EE7353165C74B486.xkm
> [794063.871] (II) config/udev: Adding input device Power Button (/dev/input/event3)
> [794063.871] (II) AutoAddDevices is off - not adding device.
> [794063.872] (II) config/udev: Adding input device Video Bus (/dev/input/event4)
> [794063.872] (II) AutoAddDevices is off - not adding device.
> [794063.881] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
> [794063.881] (II) AutoAddDevices is off - not adding device.
> [794063.881] (II) config/udev: Adding input device Sleep Button (/dev/input/event2)
> [794063.881] (II) AutoAddDevices is off - not adding device.
> [794063.886] (II) config/udev: Adding input device UVC Camera (17ef:4807) (/dev/input/event7)
> [794063.886] (II) AutoAddDevices is off - not adding device.
> [794063.886] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event8)
> [794063.886] (II) AutoAddDevices is off - not adding device.
> [794063.887] (II) config/udev: Adding input device HDA Intel Mic (/dev/input/event10)
> [794063.887] (II) AutoAddDevices is off - not adding device.
> [794063.888] (II) config/udev: Adding input device HDA Intel Headphone (/dev/input/event11)
> [794063.888] (II) AutoAddDevices is off - not adding device.
> [794063.888] (II) config/udev: Adding input device HDA Intel Headphone (/dev/input/event12)
> [794063.888] (II) AutoAddDevices is off - not adding device.
> [794063.889] (II) config/udev: Adding input device HDA Intel Mic (/dev/input/event9)
> [794063.889] (II) AutoAddDevices is off - not adding device.
> [794063.897] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
> [794063.897] (II) AutoAddDevices is off - not adding device.
> [794063.898] (II) config/udev: Adding input device TPPS/2 IBM TrackPoint (/dev/input/event5)
> [794063.898] (II) AutoAddDevices is off - not adding device.
> [794063.898] (II) config/udev: Adding input device TPPS/2 IBM TrackPoint (/dev/input/mouse0)
> [794063.898] (II) AutoAddDevices is off - not adding device.
> [794063.899] (II) config/udev: Adding input device ThinkPad Extra Buttons (/dev/input/event6)
> [794063.899] (II) AutoAddDevices is off - not adding device.
> [794063.906] (II) config/udev: Adding input device ThinkPad HDAPS joystick emulation (/dev/input/event13)
> [794063.906] (II) AutoAddDevices is off - not adding device.
> [794063.906] (II) config/udev: Adding input device ThinkPad HDAPS joystick emulation (/dev/input/js0)
> [794063.906] (II) AutoAddDevices is off - not adding device.
> [794063.907] (II) config/udev: Adding input device ThinkPad HDAPS accelerometer data (/dev/input/event14)
> [794063.907] (II) AutoAddDevices is off - not adding device.
> [794063.907] (II) config/udev: Adding input device ThinkPad HDAPS accelerometer data (/dev/input/js1)
> [794063.907] (II) AutoAddDevices is off - not adding device.
> [794066.524] (II) XKB: reuse xkmfile /var/lib/xkb/server-E6715BBB0C6029B8A19B43D2EE7353165C74B486.xkm
> [794066.720] (II) intel(0): EDID vendor "LEN", prod id 16469
> [794066.720] (II) intel(0): Printing DDC gathered Modelines:
> [794066.720] (II) intel(0): Modeline "1920x1200"x0.0 167.80 1920 1968 2000 2298 1200 1203 1206 1217 -hsync -vsync (73.0 kHz)
> [794066.720] (II) intel(0): Modeline "1920x1200"x0.0 134.28 1920 1968 2000 2208 1200 1202 1208 1220 -hsync -vsync (60.8 kHz)
> [794066.749] (II) intel(0): EDID vendor "LEN", prod id 16469
> [794066.749] (II) intel(0): Printing DDC gathered Modelines:
> [794066.749] (II) intel(0): Modeline "1920x1200"x0.0 167.80 1920 1968 2000 2298 1200 1203 1206 1217 -hsync -vsync (73.0 kHz)
> [794066.749] (II) intel(0): Modeline "1920x1200"x0.0 134.28 1920 1968 2000 2208 1200 1202 1208 1220 -hsync -vsync (60.8 kHz)
> [794073.009] (II) AIGLX: Suspending AIGLX clients for VT switch
> [794182.692] (II) Open ACPI successful (/var/run/acpid.socket)
> [794182.692] (II) AIGLX: Resuming AIGLX clients after VT switch
> [794182.701] (II) intel(0): EDID vendor "LEN", prod id 16469
> [794182.701] (II) intel(0): Printing DDC gathered Modelines:
> [794182.701] (II) intel(0): Modeline "1920x1200"x0.0 167.80 1920 1968 2000 2298 1200 1203 1206 1217 -hsync -vsync (73.0 kHz)
> [794182.701] (II) intel(0): Modeline "1920x1200"x0.0 134.28 1920 1968 2000 2208 1200 1202 1208 1220 -hsync -vsync (60.8 kHz)
> [794183.033] (II) Mouse0: ps2EnableDataReporting: succeeded
> [794254.123] (II) 3rd Button detected: disabling emulate3Button
> [804644.051] (II) AIGLX: Suspending AIGLX clients for VT switch
> [804647.770] (II) Open ACPI successful (/var/run/acpid.socket)
> [804647.770] (II) AIGLX: Resuming AIGLX clients after VT switch
> [804647.882] (II) intel(0): EDID vendor "LEN", prod id 16469
> [804647.882] (II) intel(0): Printing DDC gathered Modelines:
> [804647.882] (II) intel(0): Modeline "1920x1200"x0.0 167.80 1920 1968 2000 2298 1200 1203 1206 1217 -hsync -vsync (73.0 kHz)
> [804647.882] (II) intel(0): Modeline "1920x1200"x0.0 134.28 1920 1968 2000 2208 1200 1202 1208 1220 -hsync -vsync (60.8 kHz)
> [804648.211] (II) Mouse0: ps2EnableDataReporting: succeeded
> [805102.039] (II) 3rd Button detected: disabling emulate3Button
> [855644.468] (II) AIGLX: Suspending AIGLX clients for VT switch
> [855648.335] (II) Open ACPI successful (/var/run/acpid.socket)
> [855648.335] (II) AIGLX: Resuming AIGLX clients after VT switch
> [855648.447] (II) intel(0): EDID vendor "LEN", prod id 16469
> [855648.475] (II) intel(0): Printing DDC gathered Modelines:
> [855648.549] (II) intel(0): Modeline "1920x1200"x0.0 167.80 1920 1968 2000 2298 1200 1203 1206 1217 -hsync -vsync (73.0 kHz)
> [855648.549] (II) intel(0): Modeline "1920x1200"x0.0 134.28 1920 1968 2000 2208 1200 1202 1208 1220 -hsync -vsync (60.8 kHz)
> [855648.943] (II) Mouse0: ps2EnableDataReporting: succeeded
> [855669.918] (II) 3rd Button detected: disabling emulate3Button
> [856960.835] (II) PM Event received: Capability Changed
> [856960.873] I830PMEvent: Capability change
> [859097.619] (II) AIGLX: Suspending AIGLX clients for VT switch
> [859101.489] (II) Open ACPI successful (/var/run/acpid.socket)
> [859101.489] (II) AIGLX: Resuming AIGLX clients after VT switch
> [859101.512] (II) intel(0): EDID vendor "LEN", prod id 16469
> [859101.512] (II) intel(0): Printing DDC gathered Modelines:
> [859101.512] (II) intel(0): Modeline "1920x1200"x0.0 167.80 1920 1968 2000 2298 1200 1203 1206 1217 -hsync -vsync (73.0 kHz)
> [859101.512] (II) intel(0): Modeline "1920x1200"x0.0 134.28 1920 1968 2000 2208 1200 1202 1208 1220 -hsync -vsync (60.8 kHz)
> [859101.847] (II) Mouse0: ps2EnableDataReporting: succeeded
> [859195.859] (II) 3rd Button detected: disabling emulate3Button
> [860368.237] (II) AIGLX: Suspending AIGLX clients for VT switch
> [860372.035] (II) Open ACPI successful (/var/run/acpid.socket)
> [860372.035] (II) AIGLX: Resuming AIGLX clients after VT switch
> [860372.045] (II) intel(0): EDID vendor "LEN", prod id 16469
> [860372.045] (II) intel(0): Printing DDC gathered Modelines:
> [860372.045] (II) intel(0): Modeline "1920x1200"x0.0 167.80 1920 1968 2000 2298 1200 1203 1206 1217 -hsync -vsync (73.0 kHz)
> [860372.045] (II) intel(0): Modeline "1920x1200"x0.0 134.28 1920 1968 2000 2208 1200 1202 1208 1220 -hsync -vsync (60.8 kHz)
> [860372.375] (II) Mouse0: ps2EnableDataReporting: succeeded
> [860448.390] (II) AIGLX: Suspending AIGLX clients for VT switch
> [860452.099] (II) Open ACPI successful (/var/run/acpid.socket)
> [860452.099] (II) AIGLX: Resuming AIGLX clients after VT switch
> [860452.119] (II) intel(0): EDID vendor "LEN", prod id 16469
> [860452.119] (II) intel(0): Printing DDC gathered Modelines:
> [860452.119] (II) intel(0): Modeline "1920x1200"x0.0 167.80 1920 1968 2000 2298 1200 1203 1206 1217 -hsync -vsync (73.0 kHz)
> [860452.119] (II) intel(0): Modeline "1920x1200"x0.0 134.28 1920 1968 2000 2208 1200 1202 1208 1220 -hsync -vsync (60.8 kHz)
> [860452.448] (II) Mouse0: ps2EnableDataReporting: succeeded
> [860851.681] (II) 3rd Button detected: disabling emulate3Button
> [864145.230] (II) AIGLX: Suspending AIGLX clients for VT switch
> [864149.036] (II) Open ACPI successful (/var/run/acpid.socket)
> [864149.036] (II) AIGLX: Resuming AIGLX clients after VT switch
> [864149.051] (II) intel(0): EDID vendor "LEN", prod id 16469
> [864149.051] (II) intel(0): Printing DDC gathered Modelines:
> [864149.051] (II) intel(0): Modeline "1920x1200"x0.0 167.80 1920 1968 2000 2298 1200 1203 1206 1217 -hsync -vsync (73.0 kHz)
> [864149.051] (II) intel(0): Modeline "1920x1200"x0.0 134.28 1920 1968 2000 2208 1200 1202 1208 1220 -hsync -vsync (60.8 kHz)
> [864149.382] (II) Mouse0: ps2EnableDataReporting: succeeded
> [874594.546] (II) AIGLX: Suspending AIGLX clients for VT switch
> [874598.307] (II) Open ACPI successful (/var/run/acpid.socket)
> [874598.307] (II) AIGLX: Resuming AIGLX clients after VT switch
> [874598.316] (II) intel(0): EDID vendor "LEN", prod id 16469
> [874598.316] (II) intel(0): Printing DDC gathered Modelines:
> [874598.316] (II) intel(0): Modeline "1920x1200"x0.0 167.80 1920 1968 2000 2298 1200 1203 1206 1217 -hsync -vsync (73.0 kHz)
> [874598.316] (II) intel(0): Modeline "1920x1200"x0.0 134.28 1920 1968 2000 2208 1200 1202 1208 1220 -hsync -vsync (60.8 kHz)
> [874598.653] (II) Mouse0: ps2EnableDataReporting: succeeded
> [874603.667] (II) PM Event received: Capability Changed
> [874603.667] I830PMEvent: Capability change
> [874797.426] (II) 3rd Button detected: disabling emulate3Button
> [924731.416] (II) PM Event received: Capability Changed
> [924731.581] I830PMEvent: Capability change
> [924746.522] (II) AIGLX: Suspending AIGLX clients for VT switch
> [924750.810] (II) Open ACPI successful (/var/run/acpid.socket)
> [924750.871] (II) AIGLX: Resuming AIGLX clients after VT switch
> [924751.110] (II) intel(0): EDID vendor "LEN", prod id 16469
> [924751.187] (II) intel(0): Printing DDC gathered Modelines:
> [924751.187] (II) intel(0): Modeline "1920x1200"x0.0 167.80 1920 1968 2000 2298 1200 1203 1206 1217 -hsync -vsync (73.0 kHz)
> [924751.187] (II) intel(0): Modeline "1920x1200"x0.0 134.28 1920 1968 2000 2208 1200 1202 1208 1220 -hsync -vsync (60.8 kHz)
> [924751.574] (II) Mouse0: ps2EnableDataReporting: succeeded
> [924811.154] (II) 3rd Button detected: disabling emulate3Button
> [927498.896] (II) intel(0): EDID vendor "LEN", prod id 16469
> [927498.913] (II) intel(0): Printing DDC gathered Modelines:
> [927498.913] (II) intel(0): Modeline "1920x1200"x0.0 167.80 1920 1968 2000 2298 1200 1203 1206 1217 -hsync -vsync (73.0 kHz)
> [927498.913] (II) intel(0): Modeline "1920x1200"x0.0 134.28 1920 1968 2000 2208 1200 1202 1208 1220 -hsync -vsync (60.8 kHz)
> [927498.956] (II) intel(0): EDID vendor "LEN", prod id 16469
> [927498.956] (II) intel(0): Printing DDC gathered Modelines:
> [927498.956] (II) intel(0): Modeline "1920x1200"x0.0 167.80 1920 1968 2000 2298 1200 1203 1206 1217 -hsync -vsync (73.0 kHz)
> [927498.956] (II) intel(0): Modeline "1920x1200"x0.0 134.28 1920 1968 2000 2208 1200 1202 1208 1220 -hsync -vsync (60.8 kHz)
> [973322.323] (II) AIGLX: Suspending AIGLX clients for VT switch
> [973326.095] (II) Open ACPI successful (/var/run/acpid.socket)
> [973326.095] (II) AIGLX: Resuming AIGLX clients after VT switch
> [973326.795] (II) intel(0): EDID vendor "LEN", prod id 16469
> [973326.867] (II) intel(0): Printing DDC gathered Modelines:
> [973326.881] (II) intel(0): Modeline "1920x1200"x0.0 167.80 1920 1968 2000 2298 1200 1203 1206 1217 -hsync -vsync (73.0 kHz)
> [973326.881] (II) intel(0): Modeline "1920x1200"x0.0 134.28 1920 1968 2000 2208 1200 1202 1208 1220 -hsync -vsync (60.8 kHz)
> [973327.347] (II) Mouse0: ps2EnableDataReporting: succeeded
> [973791.556] (II) 3rd Button detected: disabling emulate3Button
> [977013.451] (II) AIGLX: Suspending AIGLX clients for VT switch
> [977017.663] (II) Open ACPI successful (/var/run/acpid.socket)
> [977017.663] (II) AIGLX: Resuming AIGLX clients after VT switch
> [977017.903] (II) intel(0): EDID vendor "LEN", prod id 16469
> [977017.990] (II) intel(0): Printing DDC gathered Modelines:
> [977017.990] (II) intel(0): Modeline "1920x1200"x0.0 167.80 1920 1968 2000 2298 1200 1203 1206 1217 -hsync -vsync (73.0 kHz)
> [977017.990] (II) intel(0): Modeline "1920x1200"x0.0 134.28 1920 1968 2000 2208 1200 1202 1208 1220 -hsync -vsync (60.8 kHz)
> [977018.423] (II) Mouse0: ps2EnableDataReporting: succeeded
> [983341.451] (II) AIGLX: Suspending AIGLX clients for VT switch
> [983345.874] (II) Open ACPI successful (/var/run/acpid.socket)
> [983346.215] (II) AIGLX: Resuming AIGLX clients after VT switch
> [983346.232] (II) intel(0): EDID vendor "LEN", prod id 16469
> [983346.232] (II) intel(0): Printing DDC gathered Modelines:
> [983346.232] (II) intel(0): Modeline "1920x1200"x0.0 167.80 1920 1968 2000 2298 1200 1203 1206 1217 -hsync -vsync (73.0 kHz)
> [983346.232] (II) intel(0): Modeline "1920x1200"x0.0 134.28 1920 1968 2000 2208 1200 1202 1208 1220 -hsync -vsync (60.8 kHz)
> [983346.688] (II) Mouse0: ps2EnableDataReporting: succeeded
> [983351.601] (II) PM Event received: Capability Changed
> [983351.601] I830PMEvent: Capability change
> [983750.380] (II) 3rd Button detected: disabling emulate3Button
> [1030584.925] (II) PM Event received: Capability Changed
> [1030584.984] I830PMEvent: Capability change
> [1060935.938] (II) AIGLX: Suspending AIGLX clients for VT switch
> [1060939.752] (II) Open ACPI successful (/var/run/acpid.socket)
> [1060939.752] (II) AIGLX: Resuming AIGLX clients after VT switch
> [1060940.128] (II) intel(0): EDID vendor "LEN", prod id 16469
> [1060940.174] (II) intel(0): Printing DDC gathered Modelines:
> [1060940.174] (II) intel(0): Modeline "1920x1200"x0.0 167.80 1920 1968 2000 2298 1200 1203 1206 1217 -hsync -vsync (73.0 kHz)
> [1060940.174] (II) intel(0): Modeline "1920x1200"x0.0 134.28 1920 1968 2000 2208 1200 1202 1208 1220 -hsync -vsync (60.8 kHz)
> [1060940.590] (II) Mouse0: ps2EnableDataReporting: succeeded
> [1060975.911] (II) 3rd Button detected: disabling emulate3Button
> [1061120.291] (II) intel(0): EDID vendor "LEN", prod id 16469
> [1061120.291] (II) intel(0): Printing DDC gathered Modelines:
> [1061120.291] (II) intel(0): Modeline "1920x1200"x0.0 167.80 1920 1968 2000 2298 1200 1203 1206 1217 -hsync -vsync (73.0 kHz)
> [1061120.292] (II) intel(0): Modeline "1920x1200"x0.0 134.28 1920 1968 2000 2208 1200 1202 1208 1220 -hsync -vsync (60.8 kHz)
> [1064111.186] (II) AIGLX: Suspending AIGLX clients for VT switch
> [1064114.667] (II) Open ACPI successful (/var/run/acpid.socket)
> [1064114.667] (II) AIGLX: Resuming AIGLX clients after VT switch
> [1064114.735] (II) intel(0): EDID vendor "LEN", prod id 16469
> [1064114.908] (II) intel(0): Printing DDC gathered Modelines:
> [1064114.908] (II) intel(0): Modeline "1920x1200"x0.0 167.80 1920 1968 2000 2298 1200 1203 1206 1217 -hsync -vsync (73.0 kHz)
> [1064114.908] (II) intel(0): Modeline "1920x1200"x0.0 134.28 1920 1968 2000 2208 1200 1202 1208 1220 -hsync -vsync (60.8 kHz)
> [1064115.250] (II) Mouse0: ps2EnableDataReporting: succeeded
> [1066426.109] (II) AIGLX: Suspending AIGLX clients for VT switch
> [1066429.767] (II) Open ACPI successful (/var/run/acpid.socket)
> [1066429.767] (II) AIGLX: Resuming AIGLX clients after VT switch
> [1066429.783] (II) intel(0): EDID vendor "LEN", prod id 16469
> [1066429.783] (II) intel(0): Printing DDC gathered Modelines:
> [1066429.783] (II) intel(0): Modeline "1920x1200"x0.0 167.80 1920 1968 2000 2298 1200 1203 1206 1217 -hsync -vsync (73.0 kHz)
> [1066429.783] (II) intel(0): Modeline "1920x1200"x0.0 134.28 1920 1968 2000 2208 1200 1202 1208 1220 -hsync -vsync (60.8 kHz)
> [1066430.113] (II) Mouse0: ps2EnableDataReporting: succeeded
> [1092475.226] (II) 3rd Button detected: disabling emulate3Button
> [1145483.054] (II) intel(0): EDID vendor "LEN", prod id 16469
> [1145483.073] (II) intel(0): Printing DDC gathered Modelines:
> [1145483.073] (II) intel(0): Modeline "1920x1200"x0.0 167.80 1920 1968 2000 2298 1200 1203 1206 1217 -hsync -vsync (73.0 kHz)
> [1145483.073] (II) intel(0): Modeline "1920x1200"x0.0 134.28 1920 1968 2000 2208 1200 1202 1208 1220 -hsync -vsync (60.8 kHz)
> [1145483.439] (II) intel(0): EDID vendor "LEN", prod id 16469
> [1145483.439] (II) intel(0): Printing DDC gathered Modelines:
> [1145483.439] (II) intel(0): Modeline "1920x1200"x0.0 167.80 1920 1968 2000 2298 1200 1203 1206 1217 -hsync -vsync (73.0 kHz)
> [1145483.439] (II) intel(0): Modeline "1920x1200"x0.0 134.28 1920 1968 2000 2208 1200 1202 1208 1220 -hsync -vsync (60.8 kHz)
> [1145483.506] (II) intel(0): EDID vendor "LEN", prod id 16469
> [1145483.506] (II) intel(0): Printing DDC gathered Modelines:
> [1145483.506] (II) intel(0): Modeline "1920x1200"x0.0 167.80 1920 1968 2000 2298 1200 1203 1206 1217 -hsync -vsync (73.0 kHz)
> [1145483.506] (II) intel(0): Modeline "1920x1200"x0.0 134.28 1920 1968 2000 2208 1200 1202 1208 1220 -hsync -vsync (60.8 kHz)
> [1145484.245] (II) intel(0): EDID vendor "LEN", prod id 16469
> [1145484.246] (II) intel(0): Printing DDC gathered Modelines:
> [1145484.246] (II) intel(0): Modeline "1920x1200"x0.0 167.80 1920 1968 2000 2298 1200 1203 1206 1217 -hsync -vsync (73.0 kHz)
> [1145484.246] (II) intel(0): Modeline "1920x1200"x0.0 134.28 1920 1968 2000 2208 1200 1202 1208 1220 -hsync -vsync (60.8 kHz)
> [1190240.285] (II) AIGLX: Suspending AIGLX clients for VT switch
> [1190244.013] (II) Open ACPI successful (/var/run/acpid.socket)
> [1190244.013] (II) AIGLX: Resuming AIGLX clients after VT switch
> [1190245.857] (II) intel(0): EDID vendor "LEN", prod id 16469
> [1190246.027] (II) intel(0): Printing DDC gathered Modelines:
> [1190246.107] (II) intel(0): Modeline "1920x1200"x0.0 167.80 1920 1968 2000 2298 1200 1203 1206 1217 -hsync -vsync (73.0 kHz)
> [1190246.107] (II) intel(0): Modeline "1920x1200"x0.0 134.28 1920 1968 2000 2208 1200 1202 1208 1220 -hsync -vsync (60.8 kHz)
> [1190246.702] (II) Mouse0: ps2EnableDataReporting: succeeded
> [1191231.841] (II) 3rd Button detected: disabling emulate3Button
> [1240105.179] (II) AIGLX: Suspending AIGLX clients for VT switch
> [1240109.234] (II) Open ACPI successful (/var/run/acpid.socket)
> [1240109.234] (II) AIGLX: Resuming AIGLX clients after VT switch
> [1240109.621] (II) intel(0): EDID vendor "LEN", prod id 16469
> [1240109.684] (II) intel(0): Printing DDC gathered Modelines:
> [1240109.684] (II) intel(0): Modeline "1920x1200"x0.0 167.80 1920 1968 2000 2298 1200 1203 1206 1217 -hsync -vsync (73.0 kHz)
> [1240109.684] (II) intel(0): Modeline "1920x1200"x0.0 134.28 1920 1968 2000 2208 1200 1202 1208 1220 -hsync -vsync (60.8 kHz)
> [1240110.091] (II) Mouse0: ps2EnableDataReporting: succeeded
> [1240277.320] (II) 3rd Button detected: disabling emulate3Button
> [1240624.693] (II) AIGLX: Suspending AIGLX clients for VT switch
> [1240628.295] (II) Open ACPI successful (/var/run/acpid.socket)
> [1240628.295] (II) AIGLX: Resuming AIGLX clients after VT switch
> [1240628.307] (II) intel(0): EDID vendor "LEN", prod id 16469
> [1240628.307] (II) intel(0): Printing DDC gathered Modelines:
> [1240628.307] (II) intel(0): Modeline "1920x1200"x0.0 167.80 1920 1968 2000 2298 1200 1203 1206 1217 -hsync -vsync (73.0 kHz)
> [1240628.307] (II) intel(0): Modeline "1920x1200"x0.0 134.28 1920 1968 2000 2208 1200 1202 1208 1220 -hsync -vsync (60.8 kHz)
> [1240628.638] (II) Mouse0: ps2EnableDataReporting: succeeded
> [1240661.617] (II) 3rd Button detected: disabling emulate3Button
> [1241636.671] (II) AIGLX: Suspending AIGLX clients for VT switch
> [1241640.595] (II) Open ACPI successful (/var/run/acpid.socket)
> [1241640.595] (II) AIGLX: Resuming AIGLX clients after VT switch
> [1241640.609] (II) intel(0): EDID vendor "LEN", prod id 16469
> [1241640.609] (II) intel(0): Printing DDC gathered Modelines:
> [1241640.609] (II) intel(0): Modeline "1920x1200"x0.0 167.80 1920 1968 2000 2298 1200 1203 1206 1217 -hsync -vsync (73.0 kHz)
> [1241640.609] (II) intel(0): Modeline "1920x1200"x0.0 134.28 1920 1968 2000 2208 1200 1202 1208 1220 -hsync -vsync (60.8 kHz)
> [1241640.944] (II) Mouse0: ps2EnableDataReporting: succeeded
> [1268787.822] (II) AIGLX: Suspending AIGLX clients for VT switch
> [1268791.566] (II) Open ACPI successful (/var/run/acpid.socket)
> [1268791.566] (II) AIGLX: Resuming AIGLX clients after VT switch
> [1268791.819] (II) intel(0): EDID vendor "LEN", prod id 16469
> [1268791.883] (II) intel(0): Printing DDC gathered Modelines:
> [1268791.883] (II) intel(0): Modeline "1920x1200"x0.0 167.80 1920 1968 2000 2298 1200 1203 1206 1217 -hsync -vsync (73.0 kHz)
> [1268791.883] (II) intel(0): Modeline "1920x1200"x0.0 134.28 1920 1968 2000 2208 1200 1202 1208 1220 -hsync -vsync (60.8 kHz)
> [1268792.208] (II) Mouse0: ps2EnableDataReporting: succeeded
> [1268797.394] (II) PM Event received: Capability Changed
> [1268797.394] I830PMEvent: Capability change
> [1269192.178] (II) 3rd Button detected: disabling emulate3Button
> [1273662.506] (II) PM Event received: Capability Changed
> [1273662.506] I830PMEvent: Capability change
> [1274897.561] (II) XKB: reuse xkmfile /var/lib/xkb/server-8CFD963B902874717C1A175903D64FC6B49C4433.xkm
> [1315705.828] (II) AIGLX: Suspending AIGLX clients for VT switch
> [1315710.458] (II) Open ACPI successful (/var/run/acpid.socket)
> [1315711.340] (II) AIGLX: Resuming AIGLX clients after VT switch
> [1315711.658] (II) intel(0): EDID vendor "LEN", prod id 16469
> [1315711.851] (II) intel(0): Printing DDC gathered Modelines:
> [1315711.851] (II) intel(0): Modeline "1920x1200"x0.0 167.80 1920 1968 2000 2298 1200 1203 1206 1217 -hsync -vsync (73.0 kHz)
> [1315711.851] (II) intel(0): Modeline "1920x1200"x0.0 134.28 1920 1968 2000 2208 1200 1202 1208 1220 -hsync -vsync (60.8 kHz)
> [1315712.351] (II) Mouse0: ps2EnableDataReporting: succeeded
> [1317695.775] (II) 3rd Button detected: disabling emulate3Button
> [1322935.862] (II) AIGLX: Suspending AIGLX clients for VT switch
> [1322939.695] (II) Open ACPI successful (/var/run/acpid.socket)
> [1322939.695] (II) AIGLX: Resuming AIGLX clients after VT switch
> [1322941.555] (II) intel(0): EDID vendor "LEN", prod id 16469
> [1322941.726] (II) intel(0): Printing DDC gathered Modelines:
> [1322941.726] (II) intel(0): Modeline "1920x1200"x0.0 167.80 1920 1968 2000 2298 1200 1203 1206 1217 -hsync -vsync (73.0 kHz)
> [1322941.726] (II) intel(0): Modeline "1920x1200"x0.0 134.28 1920 1968 2000 2208 1200 1202 1208 1220 -hsync -vsync (60.8 kHz)
> [1322942.057] (II) Mouse0: ps2EnableDataReporting: succeeded
> [1322944.365] (II) PM Event received: Capability Changed
> [1322944.365] I830PMEvent: Capability change
> [1323629.297] (II) AIGLX: Suspending AIGLX clients for VT switch
> [1323632.754] (II) Open ACPI successful (/var/run/acpid.socket)
> [1323632.754] (II) AIGLX: Resuming AIGLX clients after VT switch
> [1323632.774] (II) intel(0): EDID vendor "LEN", prod id 16469
> [1323632.774] (II) intel(0): Printing DDC gathered Modelines:
> [1323632.774] (II) intel(0): Modeline "1920x1200"x0.0 167.80 1920 1968 2000 2298 1200 1203 1206 1217 -hsync -vsync (73.0 kHz)
> [1323632.774] (II) intel(0): Modeline "1920x1200"x0.0 134.28 1920 1968 2000 2208 1200 1202 1208 1220 -hsync -vsync (60.8 kHz)
> [1323633.103] (II) Mouse0: ps2EnableDataReporting: succeeded
> [1323819.900] (II) AIGLX: Suspending AIGLX clients for VT switch
> [1323823.386] (II) Open ACPI successful (/var/run/acpid.socket)
> [1323823.386] (II) AIGLX: Resuming AIGLX clients after VT switch
> [1323823.407] (II) intel(0): EDID vendor "LEN", prod id 16469
> [1323823.407] (II) intel(0): Printing DDC gathered Modelines:
> [1323823.407] (II) intel(0): Modeline "1920x1200"x0.0 167.80 1920 1968 2000 2298 1200 1203 1206 1217 -hsync -vsync (73.0 kHz)
> [1323823.407] (II) intel(0): Modeline "1920x1200"x0.0 134.28 1920 1968 2000 2208 1200 1202 1208 1220 -hsync -vsync (60.8 kHz)
> [1323823.769] (II) Mouse0: ps2EnableDataReporting: succeeded
> [1324318.127] (II) 3rd Button detected: disabling emulate3Button
> [1327737.644] (II) AIGLX: Suspending AIGLX clients for VT switch
> [1327742.655] (II) Open ACPI successful (/var/run/acpid.socket)
> [1327742.655] (II) AIGLX: Resuming AIGLX clients after VT switch
> [1327742.668] (II) intel(0): EDID vendor "LEN", prod id 16469
> [1327742.668] (II) intel(0): Printing DDC gathered Modelines:
> [1327742.668] (II) intel(0): Modeline "1920x1200"x0.0 167.80 1920 1968 2000 2298 1200 1203 1206 1217 -hsync -vsync (73.0 kHz)
> [1327742.668] (II) intel(0): Modeline "1920x1200"x0.0 134.28 1920 1968 2000 2208 1200 1202 1208 1220 -hsync -vsync (60.8 kHz)
> [1327743.019] (II) Mouse0: ps2EnableDataReporting: succeeded
> [1329190.925] (II) AIGLX: Suspending AIGLX clients for VT switch
> [1329194.953] (II) Open ACPI successful (/var/run/acpid.socket)
> [1329194.953] (II) AIGLX: Resuming AIGLX clients after VT switch
> [1329195.084] (II) intel(0): EDID vendor "LEN", prod id 16469
> [1329195.447] (II) intel(0): Printing DDC gathered Modelines:
> [1329195.447] (II) intel(0): Modeline "1920x1200"x0.0 167.80 1920 1968 2000 2298 1200 1203 1206 1217 -hsync -vsync (73.0 kHz)
> [1329195.447] (II) intel(0): Modeline "1920x1200"x0.0 134.28 1920 1968 2000 2208 1200 1202 1208 1220 -hsync -vsync (60.8 kHz)
> [1329195.821] (II) Mouse0: ps2EnableDataReporting: succeeded
> [1329521.836] (II) 3rd Button detected: disabling emulate3Button
> [1387606.419] (II) AIGLX: Suspending AIGLX clients for VT switch
> [1387610.200] (II) Open ACPI successful (/var/run/acpid.socket)
> [1387610.200] (II) AIGLX: Resuming AIGLX clients after VT switch
> [1387610.327] (II) intel(0): EDID vendor "LEN", prod id 16469
> [1387610.365] (II) intel(0): Printing DDC gathered Modelines:
> [1387610.365] (II) intel(0): Modeline "1920x1200"x0.0 167.80 1920 1968 2000 2298 1200 1203 1206 1217 -hsync -vsync (73.0 kHz)
> [1387610.365] (II) intel(0): Modeline "1920x1200"x0.0 134.28 1920 1968 2000 2208 1200 1202 1208 1220 -hsync -vsync (60.8 kHz)
> [1387610.798] (II) Mouse0: ps2EnableDataReporting: succeeded
> [1387759.067] (II) AIGLX: Suspending AIGLX clients for VT switch
> [1387762.849] (II) Open ACPI successful (/var/run/acpid.socket)
> [1387762.850] (II) AIGLX: Resuming AIGLX clients after VT switch
> [1387762.856] (II) intel(0): EDID vendor "LEN", prod id 16469
> [1387762.856] (II) intel(0): Printing DDC gathered Modelines:
> [1387762.856] (II) intel(0): Modeline "1920x1200"x0.0 167.80 1920 1968 2000 2298 1200 1203 1206 1217 -hsync -vsync (73.0 kHz)
> [1387762.856] (II) intel(0): Modeline "1920x1200"x0.0 134.28 1920 1968 2000 2208 1200 1202 1208 1220 -hsync -vsync (60.8 kHz)
> [1387763.193] (II) Mouse0: ps2EnableDataReporting: succeeded
> [1387791.947] (II) AIGLX: Suspending AIGLX clients for VT switch
> [1387795.608] (II) Open ACPI successful (/var/run/acpid.socket)
> [1387795.608] (II) AIGLX: Resuming AIGLX clients after VT switch
> [1387795.629] (II) intel(0): EDID vendor "LEN", prod id 16469
> [1387795.657] (II) intel(0): Printing DDC gathered Modelines:
> [1387795.657] (II) intel(0): Modeline "1920x1200"x0.0 167.80 1920 1968 2000 2298 1200 1203 1206 1217 -hsync -vsync (73.0 kHz)
> [1387795.657] (II) intel(0): Modeline "1920x1200"x0.0 134.28 1920 1968 2000 2208 1200 1202 1208 1220 -hsync -vsync (60.8 kHz)
> [1387795.993] (II) Mouse0: ps2EnableDataReporting: succeeded
> [1387984.654] (II) 3rd Button detected: disabling emulate3Button
> [1390272.403] (II) AIGLX: Suspending AIGLX clients for VT switch
> [1390276.108] (II) Open ACPI successful (/var/run/acpid.socket)
> [1390276.108] (II) AIGLX: Resuming AIGLX clients after VT switch
> [1390276.125] (II) intel(0): EDID vendor "LEN", prod id 16469
> [1390276.133] (II) intel(0): Printing DDC gathered Modelines:
> [1390276.133] (II) intel(0): Modeline "1920x1200"x0.0 167.80 1920 1968 2000 2298 1200 1203 1206 1217 -hsync -vsync (73.0 kHz)
> [1390276.133] (II) intel(0): Modeline "1920x1200"x0.0 134.28 1920 1968 2000 2208 1200 1202 1208 1220 -hsync -vsync (60.8 kHz)
> [1390276.474] (II) Mouse0: ps2EnableDataReporting: succeeded
> [1390819.144] (II) AIGLX: Suspending AIGLX clients for VT switch
> [1390822.780] (II) Open ACPI successful (/var/run/acpid.socket)
> [1390822.780] (II) AIGLX: Resuming AIGLX clients after VT switch
> [1390822.788] (II) intel(0): EDID vendor "LEN", prod id 16469
> [1390822.788] (II) intel(0): Printing DDC gathered Modelines:
> [1390822.788] (II) intel(0): Modeline "1920x1200"x0.0 167.80 1920 1968 2000 2298 1200 1203 1206 1217 -hsync -vsync (73.0 kHz)
> [1390822.788] (II) intel(0): Modeline "1920x1200"x0.0 134.28 1920 1968 2000 2208 1200 1202 1208 1220 -hsync -vsync (60.8 kHz)
> [1390823.132] (II) Mouse0: ps2EnableDataReporting: succeeded
> [1391079.401] (II) AIGLX: Suspending AIGLX clients for VT switch
> [1391088.196] (II) Open ACPI successful (/var/run/acpid.socket)
> [1391088.196] (II) AIGLX: Resuming AIGLX clients after VT switch
> [1391088.202] (II) intel(0): EDID vendor "LEN", prod id 16469
> [1391088.202] (II) intel(0): Printing DDC gathered Modelines:
> [1391088.202] (II) intel(0): Modeline "1920x1200"x0.0 167.80 1920 1968 2000 2298 1200 1203 1206 1217 -hsync -vsync (73.0 kHz)
> [1391088.202] (II) intel(0): Modeline "1920x1200"x0.0 134.28 1920 1968 2000 2208 1200 1202 1208 1220 -hsync -vsync (60.8 kHz)
> [1391088.546] (II) Mouse0: ps2EnableDataReporting: succeeded
> [1391181.112] (II) AIGLX: Suspending AIGLX clients for VT switch
> [1391184.685] (II) Open ACPI successful (/var/run/acpid.socket)
> [1391184.685] (II) AIGLX: Resuming AIGLX clients after VT switch
> [1391184.708] (II) intel(0): EDID vendor "LEN", prod id 16469
> [1391184.708] (II) intel(0): Printing DDC gathered Modelines:
> [1391184.708] (II) intel(0): Modeline "1920x1200"x0.0 167.80 1920 1968 2000 2298 1200 1203 1206 1217 -hsync -vsync (73.0 kHz)
> [1391184.708] (II) intel(0): Modeline "1920x1200"x0.0 134.28 1920 1968 2000 2208 1200 1202 1208 1220 -hsync -vsync (60.8 kHz)
> [1391185.047] (II) Mouse0: ps2EnableDataReporting: succeeded
> [1391209.119] (II) 3rd Button detected: disabling emulate3Button
> [1391509.297] (II) AIGLX: Suspending AIGLX clients for VT switch
> [1391513.502] (II) Open ACPI successful (/var/run/acpid.socket)
> [1391513.502] (II) AIGLX: Resuming AIGLX clients after VT switch
> [1391513.520] (II) intel(0): EDID vendor "LEN", prod id 16469
> [1391513.520] (II) intel(0): Printing DDC gathered Modelines:
> [1391513.520] (II) intel(0): Modeline "1920x1200"x0.0 167.80 1920 1968 2000 2298 1200 1203 1206 1217 -hsync -vsync (73.0 kHz)
> [1391513.520] (II) intel(0): Modeline "1920x1200"x0.0 134.28 1920 1968 2000 2208 1200 1202 1208 1220 -hsync -vsync (60.8 kHz)
> [1391513.871] (II) Mouse0: ps2EnableDataReporting: succeeded
> [1392407.232] (II) 3rd Button detected: disabling emulate3Button
> [1394990.446] (II) AIGLX: Suspending AIGLX clients for VT switch
> [1394994.062] (II) Open ACPI successful (/var/run/acpid.socket)
> [1394994.062] (II) AIGLX: Resuming AIGLX clients after VT switch
> [1394994.078] (II) intel(0): EDID vendor "LEN", prod id 16469
> [1394994.078] (II) intel(0): Printing DDC gathered Modelines:
> [1394994.078] (II) intel(0): Modeline "1920x1200"x0.0 167.80 1920 1968 2000 2298 1200 1203 1206 1217 -hsync -vsync (73.0 kHz)
> [1394994.078] (II) intel(0): Modeline "1920x1200"x0.0 134.28 1920 1968 2000 2208 1200 1202 1208 1220 -hsync -vsync (60.8 kHz)
> [1394994.415] (II) Mouse0: ps2EnableDataReporting: succeeded
> [1395073.711] (II) 3rd Button detected: disabling emulate3Button
> [1403383.611] (II) AIGLX: Suspending AIGLX clients for VT switch
> [1403387.204] (II) Open ACPI successful (/var/run/acpid.socket)
> [1403387.204] (II) AIGLX: Resuming AIGLX clients after VT switch
> [1403387.213] (II) intel(0): EDID vendor "LEN", prod id 16469
> [1403387.213] (II) intel(0): Printing DDC gathered Modelines:
> [1403387.213] (II) intel(0): Modeline "1920x1200"x0.0 167.80 1920 1968 2000 2298 1200 1203 1206 1217 -hsync -vsync (73.0 kHz)
> [1403387.213] (II) intel(0): Modeline "1920x1200"x0.0 134.28 1920 1968 2000 2208 1200 1202 1208 1220 -hsync -vsync (60.8 kHz)
> [1403387.572] (II) Mouse0: ps2EnableDataReporting: succeeded
> [1425810.054] (II) AIGLX: Suspending AIGLX clients for VT switch
> [1425830.515] (II) Open ACPI successful (/var/run/acpid.socket)
> [1425830.515] (II) AIGLX: Resuming AIGLX clients after VT switch
> [1425830.526] (II) intel(0): EDID vendor "LEN", prod id 16469
> [1425830.593] (II) intel(0): Printing DDC gathered Modelines:
> [1425830.958] (II) intel(0): Modeline "1920x1200"x0.0 167.80 1920 1968 2000 2298 1200 1203 1206 1217 -hsync -vsync (73.0 kHz)
> [1425830.958] (II) intel(0): Modeline "1920x1200"x0.0 134.28 1920 1968 2000 2208 1200 1202 1208 1220 -hsync -vsync (60.8 kHz)
> [1425831.286] (II) Mouse0: ps2EnableDataReporting: succeeded
> [1425832.843] (II) PM Event received: Capability Changed
> [1425832.843] I830PMEvent: Capability change
> [1426080.886] (II) PM Event received: Capability Changed
> [1426080.886] I830PMEvent: Capability change
> [1426968.948] (II) 3rd Button detected: disabling emulate3Button
> [1429731.886] (II) AIGLX: Suspending AIGLX clients for VT switch
> [1429752.081] (II) Open ACPI successful (/var/run/acpid.socket)
> [1429752.081] (II) AIGLX: Resuming AIGLX clients after VT switch
> [1429752.087] (II) intel(0): EDID vendor "LEN", prod id 16469
> [1429752.087] (II) intel(0): Printing DDC gathered Modelines:
> [1429752.087] (II) intel(0): Modeline "1920x1200"x0.0 167.80 1920 1968 2000 2298 1200 1203 1206 1217 -hsync -vsync (73.0 kHz)
> [1429752.087] (II) intel(0): Modeline "1920x1200"x0.0 134.28 1920 1968 2000 2208 1200 1202 1208 1220 -hsync -vsync (60.8 kHz)
> [1429752.429] (II) Mouse0: ps2EnableDataReporting: succeeded
> [1429981.089] (II) PM Event received: Capability Changed
> [1429981.089] I830PMEvent: Capability change
> [1430007.346] (II) PM Event received: Capability Changed
> [1430007.346] I830PMEvent: Capability change
> [1430037.092] (II) 3rd Button detected: disabling emulate3Button
> [1434913.065] (II) AIGLX: Suspending AIGLX clients for VT switch
> [1434933.118] (II) Open ACPI successful (/var/run/acpid.socket)
> [1434933.118] (II) AIGLX: Resuming AIGLX clients after VT switch
> [1434933.230] (II) intel(0): EDID vendor "LEN", prod id 16469
> [1434933.536] (II) intel(0): Printing DDC gathered Modelines:
> [1434933.536] (II) intel(0): Modeline "1920x1200"x0.0 167.80 1920 1968 2000 2298 1200 1203 1206 1217 -hsync -vsync (73.0 kHz)
> [1434933.536] (II) intel(0): Modeline "1920x1200"x0.0 134.28 1920 1968 2000 2208 1200 1202 1208 1220 -hsync -vsync (60.8 kHz)
> [1434933.969] (II) Mouse0: ps2EnableDataReporting: succeeded
> [1436412.438] (II) PM Event received: Capability Changed
> [1436412.438] I830PMEvent: Capability change
> [1440676.270] (II) PM Event received: Capability Changed
> [1440676.270] I830PMEvent: Capability change
> [1440814.048] (II) 3rd Button detected: disabling emulate3Button
> [1440938.793] (II) AIGLX: Suspending AIGLX clients for VT switch
> [1440940.390] (II) Open ACPI successful (/var/run/acpid.socket)
> [1440940.390] (II) AIGLX: Resuming AIGLX clients after VT switch
> [1440940.406] (II) intel(0): EDID vendor "LEN", prod id 16469
> [1440940.406] (II) intel(0): Printing DDC gathered Modelines:
> [1440940.406] (II) intel(0): Modeline "1920x1200"x0.0 167.80 1920 1968 2000 2298 1200 1203 1206 1217 -hsync -vsync (73.0 kHz)
> [1440940.406] (II) intel(0): Modeline "1920x1200"x0.0 134.28 1920 1968 2000 2208 1200 1202 1208 1220 -hsync -vsync (60.8 kHz)
> [1440940.752] (II) Mouse0: ps2EnableDataReporting: succeeded
> [1440949.594] (II) AIGLX: Suspending AIGLX clients for VT switch
> [1441009.316] (II) Open ACPI successful (/var/run/acpid.socket)
> [1441009.316] (II) AIGLX: Resuming AIGLX clients after VT switch
> [1441009.333] (II) intel(0): EDID vendor "LEN", prod id 16469
> [1441009.333] (II) intel(0): Printing DDC gathered Modelines:
> [1441009.333] (II) intel(0): Modeline "1920x1200"x0.0 167.80 1920 1968 2000 2298 1200 1203 1206 1217 -hsync -vsync (73.0 kHz)
> [1441009.333] (II) intel(0): Modeline "1920x1200"x0.0 134.28 1920 1968 2000 2208 1200 1202 1208 1220 -hsync -vsync (60.8 kHz)
> [1441009.666] (II) Mouse0: ps2EnableDataReporting: succeeded
> [1441174.343] (II) 3rd Button detected: disabling emulate3Button
> [1480246.000] (II) PM Event received: Capability Changed
> [1480246.084] I830PMEvent: Capability change
> [1496205.209] (II) intel(0): EDID vendor "LEN", prod id 16469
> [1496205.233] (II) intel(0): Printing DDC gathered Modelines:
> [1496205.233] (II) intel(0): Modeline "1920x1200"x0.0 167.80 1920 1968 2000 2298 1200 1203 1206 1217 -hsync -vsync (73.0 kHz)
> [1496205.233] (II) intel(0): Modeline "1920x1200"x0.0 134.28 1920 1968 2000 2208 1200 1202 1208 1220 -hsync -vsync (60.8 kHz)
> [1496205.262] (II) intel(0): EDID vendor "LEN", prod id 16469
> [1496205.262] (II) intel(0): Printing DDC gathered Modelines:
> [1496205.263] (II) intel(0): Modeline "1920x1200"x0.0 167.80 1920 1968 2000 2298 1200 1203 1206 1217 -hsync -vsync (73.0 kHz)
> [1496205.263] (II) intel(0): Modeline "1920x1200"x0.0 134.28 1920 1968 2000 2208 1200 1202 1208 1220 -hsync -vsync (60.8 kHz)
> [1496593.969] (II) intel(0): EDID vendor "LEN", prod id 16469
> [1496593.969] (II) intel(0): Printing DDC gathered Modelines:
> [1496593.969] (II) intel(0): Modeline "1920x1200"x0.0 167.80 1920 1968 2000 2298 1200 1203 1206 1217 -hsync -vsync (73.0 kHz)
> [1496593.969] (II) intel(0): Modeline "1920x1200"x0.0 134.28 1920 1968 2000 2208 1200 1202 1208 1220 -hsync -vsync (60.8 kHz)
> [1496593.998] (II) intel(0): EDID vendor "LEN", prod id 16469
> [1496593.998] (II) intel(0): Printing DDC gathered Modelines:
> [1496593.998] (II) intel(0): Modeline "1920x1200"x0.0 167.80 1920 1968 2000 2298 1200 1203 1206 1217 -hsync -vsync (73.0 kHz)
> [1496593.999] (II) intel(0): Modeline "1920x1200"x0.0 134.28 1920 1968 2000 2208 1200 1202 1208 1220 -hsync -vsync (60.8 kHz)
> [1496682.530] (II) intel(0): EDID vendor "LEN", prod id 16469
> [1496682.530] (II) intel(0): Printing DDC gathered Modelines:
> [1496682.530] (II) intel(0): Modeline "1920x1200"x0.0 167.80 1920 1968 2000 2298 1200 1203 1206 1217 -hsync -vsync (73.0 kHz)
> [1496682.530] (II) intel(0): Modeline "1920x1200"x0.0 134.28 1920 1968 2000 2208 1200 1202 1208 1220 -hsync -vsync (60.8 kHz)
> [1496682.559] (II) intel(0): EDID vendor "LEN", prod id 16469
> [1496682.559] (II) intel(0): Printing DDC gathered Modelines:
> [1496682.559] (II) intel(0): Modeline "1920x1200"x0.0 167.80 1920 1968 2000 2298 1200 1203 1206 1217 -hsync -vsync (73.0 kHz)
> [1496682.559] (II) intel(0): Modeline "1920x1200"x0.0 134.28 1920 1968 2000 2208 1200 1202 1208 1220 -hsync -vsync (60.8 kHz)
> [1497445.627] (II) intel(0): EDID vendor "LEN", prod id 16469
> [1497445.627] (II) intel(0): Printing DDC gathered Modelines:
> [1497445.627] (II) intel(0): Modeline "1920x1200"x0.0 167.80 1920 1968 2000 2298 1200 1203 1206 1217 -hsync -vsync (73.0 kHz)
> [1497445.627] (II) intel(0): Modeline "1920x1200"x0.0 134.28 1920 1968 2000 2208 1200 1202 1208 1220 -hsync -vsync (60.8 kHz)
> [1497445.658] (II) intel(0): EDID vendor "LEN", prod id 16469
> [1497445.658] (II) intel(0): Printing DDC gathered Modelines:
> [1497445.658] (II) intel(0): Modeline "1920x1200"x0.0 167.80 1920 1968 2000 2298 1200 1203 1206 1217 -hsync -vsync (73.0 kHz)
> [1497445.658] (II) intel(0): Modeline "1920x1200"x0.0 134.28 1920 1968 2000 2208 1200 1202 1208 1220 -hsync -vsync (60.8 kHz)
> [1497985.921] (II) intel(0): EDID vendor "LEN", prod id 16469
> [1497985.921] (II) intel(0): Printing DDC gathered Modelines:
> [1497985.921] (II) intel(0): Modeline "1920x1200"x0.0 167.80 1920 1968 2000 2298 1200 1203 1206 1217 -hsync -vsync (73.0 kHz)
> [1497985.921] (II) intel(0): Modeline "1920x1200"x0.0 134.28 1920 1968 2000 2208 1200 1202 1208 1220 -hsync -vsync (60.8 kHz)
> [1497985.951] (II) intel(0): EDID vendor "LEN", prod id 16469
> [1497985.951] (II) intel(0): Printing DDC gathered Modelines:
> [1497985.951] (II) intel(0): Modeline "1920x1200"x0.0 167.80 1920 1968 2000 2298 1200 1203 1206 1217 -hsync -vsync (73.0 kHz)
> [1497985.951] (II) intel(0): Modeline "1920x1200"x0.0 134.28 1920 1968 2000 2208 1200 1202 1208 1220 -hsync -vsync (60.8 kHz)
> [1514424.017] (II) intel(0): EDID vendor "LEN", prod id 16469
> [1514424.061] (II) intel(0): Printing DDC gathered Modelines:
> [1514424.061] (II) intel(0): Modeline "1920x1200"x0.0 167.80 1920 1968 2000 2298 1200 1203 1206 1217 -hsync -vsync (73.0 kHz)
> [1514424.072] (II) intel(0): Modeline "1920x1200"x0.0 134.28 1920 1968 2000 2208 1200 1202 1208 1220 -hsync -vsync (60.8 kHz)
> [1514424.105] (II) intel(0): EDID vendor "LEN", prod id 16469
> [1514424.105] (II) intel(0): Printing DDC gathered Modelines:
> [1514424.105] (II) intel(0): Modeline "1920x1200"x0.0 167.80 1920 1968 2000 2298 1200 1203 1206 1217 -hsync -vsync (73.0 kHz)
> [1514424.105] (II) intel(0): Modeline "1920x1200"x0.0 134.28 1920 1968 2000 2208 1200 1202 1208 1220 -hsync -vsync (60.8 kHz)
> [1522370.089] (II) AIGLX: Suspending AIGLX clients for VT switch
> [1522392.623] (II) Open ACPI successful (/var/run/acpid.socket)
> [1522392.623] (II) AIGLX: Resuming AIGLX clients after VT switch
> [1522392.693] (II) intel(0): EDID vendor "LEN", prod id 16469
> [1522392.702] (II) intel(0): Printing DDC gathered Modelines:
> [1522392.702] (II) intel(0): Modeline "1920x1200"x0.0 167.80 1920 1968 2000 2298 1200 1203 1206 1217 -hsync -vsync (73.0 kHz)
> [1522392.702] (II) intel(0): Modeline "1920x1200"x0.0 134.28 1920 1968 2000 2208 1200 1202 1208 1220 -hsync -vsync (60.8 kHz)
> [1522393.108] (II) Mouse0: ps2EnableDataReporting: succeeded
> [1522470.956] (II) AIGLX: Suspending AIGLX clients for VT switch
> [1522502.888] (II) Open ACPI successful (/var/run/acpid.socket)
> [1522502.888] (II) AIGLX: Resuming AIGLX clients after VT switch
> [1522502.940] (II) intel(0): EDID vendor "LEN", prod id 16469
> [1522502.940] (II) intel(0): Printing DDC gathered Modelines:
> [1522502.940] (II) intel(0): Modeline "1920x1200"x0.0 167.80 1920 1968 2000 2298 1200 1203 1206 1217 -hsync -vsync (73.0 kHz)
> [1522502.940] (II) intel(0): Modeline "1920x1200"x0.0 134.28 1920 1968 2000 2208 1200 1202 1208 1220 -hsync -vsync (60.8 kHz)
> [1522503.284] (II) Mouse0: ps2EnableDataReporting: succeeded
> [1528476.006] (II) 3rd Button detected: disabling emulate3Button
> [1535818.200] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.208] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.208] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.208] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.209] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.209] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.217] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.217] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.217] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.217] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.218] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.218] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.221] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.221] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.221] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.221] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.222] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.222] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.223] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.223] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.224] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.224] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.224] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.224] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.237] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.237] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.239] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.239] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.239] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.239] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.239] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.239] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.240] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.240] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.240] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.240] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.241] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.241] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.241] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.241] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.241] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.241] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.241] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.241] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.241] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.241] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.242] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.242] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.242] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.242] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.242] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.242] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.242] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.242] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.242] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.242] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.243] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.243] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.244] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.244] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.244] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.244] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.245] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.245] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.245] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.245] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.245] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.245] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.245] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.245] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.245] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.246] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.246] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.246] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.246] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.246] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.246] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.246] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.246] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.247] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.247] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.247] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.247] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.247] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.247] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.247] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.247] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.247] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.248] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.248] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.248] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.248] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.248] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.248] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.249] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.249] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.249] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.249] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.249] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.249] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.250] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.250] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.250] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.250] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.250] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.250] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.250] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.250] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.251] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.251] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.251] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.251] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.251] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.251] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.251] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.251] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.251] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.251] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.252] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.252] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.252] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.252] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.252] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.252] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.252] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.252] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.253] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.253] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.253] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.253] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.471] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.471] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.471] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.471] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.472] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.472] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.474] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.475] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.475] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.475] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.476] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.476] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.477] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.477] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.478] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.478] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.479] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.479] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.479] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.479] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.479] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.479] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.480] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.480] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.480] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.480] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.480] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.480] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.480] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.480] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.481] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.481] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.481] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.481] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.481] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.481] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.481] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.481] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.482] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.482] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.482] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.482] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.482] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.482] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.482] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.482] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.483] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.483] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.483] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.483] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.483] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.483] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.483] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.483] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.484] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.484] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.484] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.484] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.484] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.484] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.484] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.484] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.485] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.485] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.485] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.485] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.485] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.485] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.485] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.486] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.486] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.486] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.486] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.486] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.486] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.486] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.487] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.487] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.487] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.487] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.487] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.487] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.487] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.487] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.488] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.488] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.488] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.488] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.488] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.488] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.488] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.488] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.488] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.489] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.489] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.489] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.489] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.489] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.489] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.489] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.490] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.490] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.490] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.490] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.490] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.490] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.490] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.490] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.490] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.491] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.491] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.491] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.491] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.491] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.491] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.491] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.491] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.491] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.492] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.492] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.492] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.492] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.492] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.492] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.492] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.493] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.493] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.493] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.493] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.493] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.493] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.493] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.493] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.493] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.494] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.494] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.494] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.494] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.494] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.494] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.494] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.494] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.494] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.495] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.495] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.495] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.495] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.495] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.496] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.496] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.496] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.496] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.496] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.496] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.496] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.496] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.497] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.497] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.497] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.497] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.497] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.497] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.497] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.497] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.497] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.498] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.498] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.498] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.498] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.498] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.498] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.498] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.498] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.498] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.499] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.499] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.499] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.499] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.499] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.499] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.499] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.499] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.500] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.500] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.500] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.500] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.500] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.500] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.500] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.500] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.501] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.501] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.501] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.501] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.501] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.501] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.501] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.501] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.501] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.501] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.502] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.502] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.502] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.502] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.502] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.502] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.503] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.503] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.503] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.503] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.503] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.503] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.503] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.503] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.503] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.504] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.504] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.504] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.504] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.504] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.504] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.504] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.504] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.505] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.505] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.505] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.505] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.505] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.505] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.505] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.505] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.505] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.506] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.506] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.506] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.506] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.506] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.506] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.506] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.506] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.507] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.507] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.507] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.507] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.507] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.507] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.507] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.507] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.508] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.508] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.508] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.508] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.508] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.508] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.508] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.508] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.508] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.508] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.509] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.509] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.509] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.509] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.509] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.509] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.509] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.509] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.510] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.510] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.510] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.510] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.510] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.510] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.510] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.510] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.510] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.511] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.511] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.511] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.511] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.511] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.511] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.511] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.511] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.511] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.512] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.512] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.512] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.512] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.512] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> [1535818.512] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx@lists.freedesktop.org
> http://lists.freedesktop.org/mailman/listinfo/intel-gfx
--
"A mouse is a device used to point at the xterm you want to type in" - A.S.R.
Microsoft is to operating systems ....
.... what McDonalds is to gourmet cooking
Home page: http://marc.merlins.org/
^ permalink raw reply [flat|nested] 8+ messages in thread* Re: More crashes with intel driver 1.10.4 and corrupted stack traces for GM45
2011-12-13 22:13 ` Marc MERLIN
@ 2011-12-13 23:04 ` Daniel Vetter
2011-12-14 3:05 ` Marc MERLIN
2011-12-13 23:16 ` More crashes with intel driver 1.10.4 and corrupted stack traces for GM45 Chris Wilson
1 sibling, 1 reply; 8+ messages in thread
From: Daniel Vetter @ 2011-12-13 23:04 UTC (permalink / raw)
To: Marc MERLIN; +Cc: intel-gfx
On Tue, Dec 13, 2011 at 02:13:18PM -0800, Marc MERLIN wrote:
> On Sun, Dec 11, 2011 at 12:32:00PM -0800, Marc MERLIN wrote:
> Am I sending this to the wrong place or is GM45 unsupported?
Sorry for missing this one, we're busy people. In the future, just prod us
again like you've done.
> > I reported some Xorg crashes on my lenovo W500.
> > In the past, I thought it might have been virtualbox drivers, so I make
> > sure I don't load them anymore.
> >
> > In the meantime, I upgraded to ubuntu oneiric.
> >
> > Kernel is 3.1.0:
> > agpgart-intel 0000:00:00.0: Intel GM45 Chipset
> > agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
> > agpgart-intel 0000:00:00.0: detected 32768K stolen memory
> > agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
> >
> > I have ulimit -c unlimited, so I do get cores.
> >
> > One of my X logs had some of these:
> > [1535818.200] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> > [1535818.208] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> > [1535818.208] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
This one sounds like a vma exhausting issue Chris Wilson recently fixed.
Please retest with the latest versions of xf86-video-intel and libdrm from
git.
Thanks, Daniel
--
Daniel Vetter
Mail: daniel@ffwll.ch
Mobile: +41 (0)79 365 57 48
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: More crashes with intel driver 1.10.4 and corrupted stack traces for GM45
2011-12-13 23:04 ` Daniel Vetter
@ 2011-12-14 3:05 ` Marc MERLIN
2011-12-14 8:36 ` Chris Wilson
2011-12-26 23:15 ` intel_drv 2.17.0 hangs X at boot while 2.15.901 works but crashes (GM45) Marc MERLIN
0 siblings, 2 replies; 8+ messages in thread
From: Marc MERLIN @ 2011-12-14 3:05 UTC (permalink / raw)
To: Daniel Vetter, Chris Wilson; +Cc: intel-gfx
On Wed, Dec 14, 2011 at 12:04:03AM +0100, Daniel Vetter wrote:
> > > One of my X logs had some of these:
> > > [1535818.200] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> > > [1535818.208] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> > > [1535818.208] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
>
> This one sounds like a vma exhausting issue Chris Wilson recently fixed.
> Please retest with the latest versions of xf86-video-intel and libdrm from
> git.
On Tue, Dec 13, 2011 at 11:16:17PM +0000, Chris Wilson wrote:
> On Tue, 13 Dec 2011 14:13:18 -0800, Marc MERLIN <marc_xorg@merlins.org> wrote:
> > On Sun, Dec 11, 2011 at 12:32:00PM -0800, Marc MERLIN wrote:
> > > Hi Eugeni and other folks on this list,
> >
> > Am I sending this to the wrong place or is GM45 unsupported?
>
> Apologies, it is a known issue. I was thrown by the bizarre stack trace,
> but it seems like it just the mmap failure blowing up in spectacular
> fashion. The ENOSPC issues arises from when we have either exhausted
> or badly fragmented the (on your system presumably) 32-bits of address
> space for GTT mappings such that we are no longer able to allocate new
> ones. I have recently begun to take a similar issue whereby we exhausted
> the per-process map limit with over 65,000 vma keep open. The solution
> there of capping the number of cached vma is likely to resolve this
> problem as well.
Since I'm a newbie at thie, there isn't a 'head' per se, and I see that
not all patches are production ready.
Could you point me on what I could sync from and that would be
reasonably likely to work? :)
Thanks,
Marc
--
"A mouse is a device used to point at the xterm you want to type in" - A.S.R.
Microsoft is to operating systems ....
.... what McDonalds is to gourmet cooking
Home page: http://marc.merlins.org/
^ permalink raw reply [flat|nested] 8+ messages in thread* Re: More crashes with intel driver 1.10.4 and corrupted stack traces for GM45
2011-12-14 3:05 ` Marc MERLIN
@ 2011-12-14 8:36 ` Chris Wilson
2011-12-26 23:15 ` intel_drv 2.17.0 hangs X at boot while 2.15.901 works but crashes (GM45) Marc MERLIN
1 sibling, 0 replies; 8+ messages in thread
From: Chris Wilson @ 2011-12-14 8:36 UTC (permalink / raw)
To: Marc MERLIN, Daniel Vetter; +Cc: intel-gfx
On Tue, 13 Dec 2011 19:05:34 -0800, Marc MERLIN <marc_xorg@merlins.org> wrote:
> Since I'm a newbie at thie, there isn't a 'head' per se, and I see that
> not all patches are production ready.
> Could you point me on what I could sync from and that would be
> reasonably likely to work? :)
If you checkout the master branch of both
git://anongit.freedesktop.org/mesa/drm
and
git://anongit.freedesktop.org/xorg/driver/xf86-video-intel
You should have a working driver.
-Chris
--
Chris Wilson, Intel Open Source Technology Centre
^ permalink raw reply [flat|nested] 8+ messages in thread
* intel_drv 2.17.0 hangs X at boot while 2.15.901 works but crashes (GM45)
2011-12-14 3:05 ` Marc MERLIN
2011-12-14 8:36 ` Chris Wilson
@ 2011-12-26 23:15 ` Marc MERLIN
2012-01-01 21:40 ` Marc MERLIN
1 sibling, 1 reply; 8+ messages in thread
From: Marc MERLIN @ 2011-12-26 23:15 UTC (permalink / raw)
To: Daniel Vetter, Chris Wilson; +Cc: intel-gfx
On Wed, Dec 14, 2011 at 12:04:03AM +0100, Daniel Vetter wrote:
> > > One of my X logs had some of these:
> > > [1535818.200] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> > > [1535818.208] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> > > [1535818.208] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
>
> This one sounds like a vma exhausting issue Chris Wilson recently fixed.
> Please retest with the latest versions of xf86-video-intel and libdrm from
> git.
On Tue, Dec 13, 2011 at 11:16:17PM +0000, Chris Wilson wrote:
> Apologies, it is a known issue. I was thrown by the bizarre stack trace,
> but it seems like it just the mmap failure blowing up in spectacular
> fashion. The ENOSPC issues arises from when we have either exhausted
> or badly fragmented the (on your system presumably) 32-bits of address
> space for GTT mappings such that we are no longer able to allocate new
> ones. I have recently begun to take a similar issue whereby we exhausted
> the per-process map limit with over 65,000 vma keep open. The solution
> there of capping the number of cached vma is likely to resolve this
> problem as well.
On Wed, Dec 14, 2011 at 08:36:41AM +0000, Chris Wilson wrote:
> On Tue, 13 Dec 2011 19:05:34 -0800, Marc MERLIN <marc_xorg@merlins.org> wrote:
> > Since I'm a newbie at thie, there isn't a 'head' per se, and I see that
> > not all patches are production ready.
> > Could you point me on what I could sync from and that would be
> > reasonably likely to work? :)
>
> If you checkout the master branch of both
>
> git://anongit.freedesktop.org/mesa/drm
> and
> git://anongit.freedesktop.org/xorg/driver/xf86-video-intel
>
> You should have a working driver.
Hi folks,
I got the chance to compile git and install it.
I installed the 4 binaries like so:
/usr/lib/libdrm_intel.so.1.0.0-git
/usr/lib/xorg/modules/drivers/intel_drv.so-git
/usr/lib/libdrm.so.2.4.0-git
/usr/lib/libdrm_radeon.so.1.0.0-git
and symlinked the ubuntu oneiric files to those new versions (moving the originals out
fo the way).
So everything works if I use all 4 binaries except intel_drv.so-git and
link intel_drv.so to the binary from oneric.
With driver 2.15.901, I still get the same crash than before:
Core was generated by `/usr/bin/X :0 vt8 -nr -nolisten tcp -auth /var/run/xauth/A:0-TaSDmc'.
Program terminated with signal 11, Segmentation fault.
#0 0x0808266b in ?? ()
(gdb) backtrace full
#0 0x0808266b in ?? ()
No symbol table info available.
#1 0x0807fea0 in ProcUngrabKeyboard ()
No symbol table info available.
#2 0x08072117 in ?? ()
No symbol table info available.
#3 0x0806470c in ?? ()
No symbol table info available.
#4 0xb7422113 in __libc_start_main (main=0x80643a0, argc=8, ubp_av=0xbfe63454,
init=0x81d7100 <__libc_csu_init>, fini=0x81d7170 <__libc_csu_fini>, rtld_fini=0xb7791bc0,
stack_end=0xbfe6344c) at libc-start.c:226
result = <optimized out>
unwind_buf = {cancel_jmp_buf = {{jmp_buf = {-1218965516, 0, 0, 0, 1950853741, 1013026428},
mask_was_saved = 0}}, priv = {pad = {0x0, 0x0, 0x8, 0x8064a00}, data = {prev = 0x0,
cleanup = 0x0, canceltype = 8}}}
not_first_call = <optimized out>
#5 0x08064a21 in _start ()
No symbol table info available.
So, new versions of libdrm.so and libdrm_intel.so did not help.
Unfortunately when I try to start X with 2.17.0, it just hard hangs to the
point where the console is hung, but I can still reboot the machine, so it's not a hard
linux hang.
Is there better debug I can give or things I can try to see why X just hangs?
If I change to a 64bit kernel, can I keep my 32bit userland and would this fix this
problem I'm having here?
[234673.242] (II) LoadModule: "intel"
[234673.242] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[234673.265] (II) Module intel: vendor="X.Org Foundation"
[234673.265] compiled for 1.10.4, module version = 2.17.0
[234673.265] Module class: X.Org Video Driver
[234673.265] ABI class: X.Org Video Driver, version 10.0
[234673.266] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server
[234673.267] (--) using VT number 7
[234673.278] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[234673.279] drmOpenDevice: node name is /dev/dri/card0
[234673.279] drmOpenDevice: open result is 11, (OK)
[234673.279] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
[234673.279] drmOpenDevice: node name is /dev/dri/card0
[234673.279] drmOpenDevice: open result is 11, (OK)
[234673.279] drmOpenByBusid: drmOpenMinor returns 11
[234673.279] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[234673.279] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[234673.279] (==) intel(0): RGB weight 888
[234673.279] (==) intel(0): Default visual is TrueColor
[234673.279] (II) intel(0): Integrated Graphics Chipset: Intel(R) GM45
[234673.279] (--) intel(0): Chipset: "GM45"
X hangs here ^^^^^^^
With:
17 /usr/lib/libdrm_intel.so -> libdrm_intel.so.1*
21 /usr/lib/libdrm_intel.so.1 -> libdrm_intel.so.1.0.0*
25 /usr/lib/libdrm_intel.so.1.0.0 -> libdrm_intel.so.1.0.0-git*
135193 /usr/lib/libdrm_intel.so.1.0.0-git*
34148 /usr/lib/libdrm_intel.so.1.0.0.oneric
22 /usr/lib/libdrm_radeon.so -> libdrm_radeon.so.1.0.0*
31 /usr/lib/libdrm_radeon.so.1 -> /usr/lib/libdrm_radeon.so.1.0.0*
26 /usr/lib/libdrm_radeon.so.1.0.0 -> libdrm_radeon.so.1.0.0-git*
78245 /usr/lib/libdrm_radeon.so.1.0.0-git*
13760 /usr/lib/libdrm_radeon.so.1.0.0.oneric
15 /usr/lib/libdrm.so.2 -> libdrm.so.2.4.0*
19 /usr/lib/libdrm.so.2.4.0 -> libdrm.so.2.4.0-git*
129400 /usr/lib/libdrm.so.2.4.0-git*
34224 /usr/lib/libdrm.so.2.4.0.oneric
19 /usr/lib/xorg/modules/drivers/intel_drv.so -> intel_drv.so.oneric
443205 /usr/lib/xorg/modules/drivers/intel_drv.so-git*
327752 /usr/lib/xorg/modules/drivers/intel_drv.so.oneric
For comparison, with driver 2.15.901, startup looks like this:
[ 235.405] (II) LoadModule: "intel"
[ 235.406] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 235.431] (II) Module intel: vendor="X.Org Foundation"
[ 235.431] compiled for 1.10.4, module version = 2.15.901
[ 235.431] Module class: X.Org Video Driver
[ 235.431] ABI class: X.Org Video Driver, version 10.0
[ 235.431] (II) LoadModule: "mouse"
[ 235.432] (II) Loading /usr/lib/xorg/modules/input/mouse_drv.so
[ 235.443] (II) Module mouse: vendor="X.Org Foundation"
[ 235.443] compiled for 1.10.2.902, module version = 1.7.1
[ 235.443] Module class: X.Org XInput Driver
[ 235.443] ABI class: X.Org XInput driver, version 12.3
[ 235.443] (II) LoadModule: "kbd"
[ 235.443] (II) Loading /usr/lib/xorg/modules/input/kbd_drv.so
[ 235.449] (II) Module kbd: vendor="X.Org Foundation"
[ 235.449] compiled for 1.10.2, module version = 1.6.0
[ 235.449] Module class: X.Org XInput Driver
[ 235.449] ABI class: X.Org XInput driver, version 12.3
[ 235.449] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server
[ 235.449] (++) using VT number 8
[ 235.464] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 235.465] drmOpenDevice: node name is /dev/dri/card0
[ 235.465] drmOpenDevice: open result is 9, (OK)
[ 235.465] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
[ 235.465] drmOpenDevice: node name is /dev/dri/card0
[ 235.465] drmOpenDevice: open result is 9, (OK)
[ 235.465] drmOpenByBusid: drmOpenMinor returns 9
[ 235.465] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[ 235.465] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 235.465] (==) intel(0): RGB weight 888
[ 235.465] (==) intel(0): Default visual is TrueColor
[ 235.465] (II) intel(0): Integrated Graphics Chipset: Intel(R) GM45
[ 235.465] (--) intel(0): Chipset: "GM45"
[ 235.465] (**) intel(0): Relaxed fencing enabled
[ 235.465] (**) intel(0): Wait on SwapBuffers? enabled
[ 235.465] (**) intel(0): Triple buffering? enabled
[ 235.465] (**) intel(0): Framebuffer tiled
[ 235.465] (**) intel(0): Pixmaps tiled
[ 235.465] (**) intel(0): 3D buffers tiled
[ 235.465] (**) intel(0): SwapBuffers wait enabled
[ 235.465] (==) intel(0): video overlay key set to 0x101fe
[ 235.465] (II) intel(0): Output LVDS1 using monitor section Monitor0
[ 235.465] (II) intel(0): found backlight control interface /sys/class/backlight/acpi_video0
[ 235.482] (II) intel(0): Output VGA1 has no monitor section
[ 235.494] (II) intel(0): Output DP1 has no monitor section
[ 235.494] (II) intel(0): EDID for output LVDS1
[ 235.494] (II) intel(0): Manufacturer: LEN Model: 4055 Serial#: 0
[ 235.494] (II) intel(0): Year: 2007 Week: 0
[ 235.494] (II) intel(0): EDID Version: 1.3
[ 235.494] (II) intel(0): Digital Display Input
[ 235.494] (II) intel(0): Max Image Size [cm]: horiz.: 33 vert.: 21
[ 235.494] (II) intel(0): Gamma: 2.20
[ 235.494] (II) intel(0): DPMS capabilities: StandBy Suspend Off
[ 235.494] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 235.494] (II) intel(0): First detailed timing is preferred mode
[ 235.494] (II) intel(0): redX: 0.580 redY: 0.340 greenX: 0.310 greenY: 0.550
[ 235.494] (II) intel(0): blueX: 0.155 blueY: 0.155 whiteX: 0.313 whiteY: 0.329
[ 235.494] (II) intel(0): Manufacturer's mask: 0
[ 235.494] (II) intel(0): Supported detailed timing:
[ 235.494] (II) intel(0): clock: 167.8 MHz Image Size: 331 x 207 mm
[ 235.494] (II) intel(0): h_active: 1920 h_sync: 1968 h_sync_end 2000 h_blank_end 2298 h_border: 0
[ 235.494] (II) intel(0): v_active: 1200 v_sync: 1203 v_sync_end 1206 v_blanking: 1217 v_border: 0
[ 235.494] (II) intel(0): Supported detailed timing:
[ 235.494] (II) intel(0): clock: 134.3 MHz Image Size: 331 x 207 mm
[ 235.494] (II) intel(0): h_active: 1920 h_sync: 1968 h_sync_end 2000 h_blank_end 2208 h_border: 0
[ 235.494] (II) intel(0): v_active: 1200 v_sync: 1202 v_sync_end 1208 v_blanking: 1220 v_border: 0
[ 235.494] (II) intel(0): Unknown vendor-specific block f
[ 235.494] (II) intel(0): LTN154U2-L05
[ 235.494] (II) intel(0): EDID (in hex):
[ 235.494] (II) intel(0): 00ffffffffffff0030ae554000000000
[ 235.494] (II) intel(0): 0011010380211578ea87f594574f8c27
[ 235.494] (II) intel(0): 27505400000001010101010101010101
[ 235.494] (II) intel(0): 0101010101018c41807a71b011403020
[ 235.494] (II) intel(0): 33004bcf100000197434802071b01440
[ 235.494] (II) intel(0): 302026004bcf100000190000000f00d1
[ 235.494] (II) intel(0): 0a32d10a281101004ca35532000000fe
[ 235.494] (II) intel(0): 004c544e31353455322d4c30350a0011
[ 235.494] (II) intel(0): EDID vendor "LEN", prod id 16469
[ 235.494] (II) intel(0): Printing DDC gathered Modelines:
[ 235.494] (II) intel(0): Modeline "1920x1200"x0.0 167.80 1920 1968 2000 2298 1200 1203 1206 1217 -hsync -vsync (73.0 kHz)
[ 235.494] (II) intel(0): Modeline "1920x1200"x0.0 134.28 1920 1968 2000 2208 1200 1202 1208 1220 -hsync -vsync (60.8 kHz)
[ 235.495] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[ 235.495] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 235.495] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 235.495] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[ 235.495] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
[ 235.495] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
[ 235.495] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[ 235.495] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
[ 235.495] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
[ 235.495] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
[ 235.495] (II) intel(0): Not using default mode "576x432" (doublescan mode not supported)
[ 235.495] (II) intel(0): Not using default mode "680x384" (doublescan mode not supported)
[ 235.495] (II) intel(0): Not using default mode "680x384" (doublescan mode not supported)
[ 235.495] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
[ 235.495] (II) intel(0): Not using default mode "720x450" (doublescan mode not supported)
[ 235.495] (II) intel(0): Not using default mode "800x512" (doublescan mode not supported)
[ 235.495] (II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
[ 235.495] (II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
[ 235.495] (II) intel(0): Not using default mode "960x540" (doublescan mode not supported)
[ 235.495] (II) intel(0): Not using default mode "960x600" (doublescan mode not supported)
[ 235.495] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
[ 235.495] (II) intel(0): Printing probed modes for output LVDS1
[ 235.495] (II) intel(0): Modeline "1920x1200"x60.0 167.80 1920 1968 2000 2298 1200 1203 1206 1217 -hsync -vsync (73.0 kHz)
[ 235.495] (II) intel(0): Modeline "1920x1200"x60.0 154.00 1920 1968 2000 2080 1200 1203 1209 1235 +hsync -vsync (74.0 kHz)
[ 235.495] (II) intel(0): Modeline "1920x1200"x49.8 134.28 1920 1968 2000 2208 1200 1202 1208 1220 -hsync -vsync (60.8 kHz)
[ 235.495] (II) intel(0): Modeline "1920x1080"x59.9 138.50 1920 1968 2000 2080 1080 1083 1088 1111 +hsync -vsync (66.6 kHz)
[ 235.495] (II) intel(0): Modeline "1600x1200"x60.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz)
[ 235.495] (II) intel(0): Modeline "1680x1050"x60.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
[ 235.496] (II) intel(0): Modeline "1680x1050"x59.9 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz)
[ 235.496] (II) intel(0): Modeline "1600x1024"x60.2 103.12 1600 1600 1656 1664 1024 1024 1029 1030 +hsync +vsync (62.0 kHz)
[ 235.496] (II) intel(0): Modeline "1400x1050"x60.0 122.00 1400 1488 1640 1880 1050 1052 1064 1082 +hsync +vsync (64.9 kHz)
[ 235.496] (II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[ 235.496] (II) intel(0): Modeline "1440x900"x59.9 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz)
[ 235.496] (II) intel(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
[ 235.496] (II) intel(0): Modeline "1360x768"x59.8 84.75 1360 1432 1568 1776 768 771 781 798 -hsync +vsync (47.7 kHz)
[ 235.496] (II) intel(0): Modeline "1360x768"x60.0 72.00 1360 1408 1440 1520 768 771 781 790 +hsync -vsync (47.4 kHz)
[ 235.496] (II) intel(0): Modeline "1152x864"x60.0 81.62 1152 1216 1336 1520 864 865 868 895 -hsync +vsync (53.7 kHz)
[ 235.496] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 235.496] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 235.496] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
[ 235.496] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 235.513] (II) intel(0): EDID for output VGA1
[ 235.525] (II) intel(0): EDID for output DP1
[ 235.525] (II) intel(0): Output LVDS1 connected
[ 235.525] (II) intel(0): Output VGA1 disconnected
[ 235.525] (II) intel(0): Output DP1 disconnected
[ 235.525] (II) intel(0): Using exact sizes for initial modes
[ 235.525] (II) intel(0): Output LVDS1 using initial mode 1920x1200
[ 235.525] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 235.525] (II) intel(0): Kernel page flipping support detected, enabling
[ 235.525] (**) intel(0): Display dimensions: (330, 210) mm
[ 235.525] (**) intel(0): DPI set to (147, 145)
[ 235.525] (II) Loading sub module "fb"
[ 235.525] (II) LoadModule: "fb"
[ 235.525] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 235.534] (II) Module fb: vendor="X.Org Foundation"
[ 235.534] compiled for 1.10.4, module version = 1.0.0
[ 235.534] ABI class: X.Org ANSI C Emulation, version 0.4
[ 235.534] (II) Loading sub module "dri2"
[ 235.534] (II) LoadModule: "dri2"
[ 235.536] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 235.536] (II) Module dri2: vendor="X.Org Foundation"
[ 235.536] compiled for 1.10.4, module version = 1.2.0
[ 235.536] ABI class: X.Org Server Extension, version 5.0
[ 235.536] (==) Depth 24 pixmap format is 32 bpp
[ 235.536] (II) intel(0): [DRI2] Setup complete
[ 235.536] (II) intel(0): [DRI2] DRI driver: i965
[ 235.536] (II) intel(0): Allocated new frame buffer 1920x1200 stride 7680, tiled
[ 235.566] (II) UXA(0): Driver registered support for the following operations:
[ 235.567] (II) solid
[ 235.567] (II) copy
[ 235.567] (II) composite (RENDER acceleration)
[ 235.567] (II) put_image
[ 235.567] (II) get_image
[ 235.567] (==) intel(0): Backing store disabled
[ 235.567] (==) intel(0): Silken mouse enabled
[ 235.568] (II) intel(0): Initializing HW Cursor
[ 235.590] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 235.592] (==) intel(0): DPMS enabled
[ 235.592] (==) intel(0): Intel XvMC decoder enabled
[ 235.592] (II) intel(0): Set up textured video
[ 235.592] (II) intel(0): [XvMC] xvmc_vld driver initialized.
[ 235.592] (II) intel(0): direct rendering: DRI2 Enabled
[ 235.592] (==) intel(0): hotplug detection: "enabled"
--
"A mouse is a device used to point at the xterm you want to type in" - A.S.R.
Microsoft is to operating systems ....
.... what McDonalds is to gourmet cooking
Home page: http://marc.merlins.org/
^ permalink raw reply [flat|nested] 8+ messages in thread* Re: intel_drv 2.17.0 hangs X at boot while 2.15.901 works but crashes (GM45)
2011-12-26 23:15 ` intel_drv 2.17.0 hangs X at boot while 2.15.901 works but crashes (GM45) Marc MERLIN
@ 2012-01-01 21:40 ` Marc MERLIN
0 siblings, 0 replies; 8+ messages in thread
From: Marc MERLIN @ 2012-01-01 21:40 UTC (permalink / raw)
To: Daniel Vetter, Chris Wilson; +Cc: intel-gfx
I had one more crash today, lost all my work again, this is crippling :(
At this point the repeated data loss linked to X crashes makes me
desperate, i'm willing to downgrade to an X that just does not crash
like this, or do anything.
The new core I have looks just like the old one below.
intel_drv.so 2.17 prevents X from starting.
intel_drv.so 2.15.901 crashes repeatedly, although just late enough that
when it does, I have a lot of work opened.
What can I do now?
Thanks,
Marc
On Mon, Dec 26, 2011 at 03:15:12PM -0800, Marc MERLIN wrote:
> On Wed, Dec 14, 2011 at 12:04:03AM +0100, Daniel Vetter wrote:
> > > > One of my X logs had some of these:
> > > > [1535818.200] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> > > > [1535818.208] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> > > > [1535818.208] (WW) intel(0): intel_uxa_prepare_access: bo map failed: No space left on device
> >
> > This one sounds like a vma exhausting issue Chris Wilson recently fixed.
> > Please retest with the latest versions of xf86-video-intel and libdrm from
> > git.
>
> On Tue, Dec 13, 2011 at 11:16:17PM +0000, Chris Wilson wrote:
> > Apologies, it is a known issue. I was thrown by the bizarre stack trace,
> > but it seems like it just the mmap failure blowing up in spectacular
> > fashion. The ENOSPC issues arises from when we have either exhausted
> > or badly fragmented the (on your system presumably) 32-bits of address
> > space for GTT mappings such that we are no longer able to allocate new
> > ones. I have recently begun to take a similar issue whereby we exhausted
> > the per-process map limit with over 65,000 vma keep open. The solution
> > there of capping the number of cached vma is likely to resolve this
> > problem as well.
>
> On Wed, Dec 14, 2011 at 08:36:41AM +0000, Chris Wilson wrote:
> > On Tue, 13 Dec 2011 19:05:34 -0800, Marc MERLIN <marc_xorg@merlins.org> wrote:
> > > Since I'm a newbie at thie, there isn't a 'head' per se, and I see that
> > > not all patches are production ready.
> > > Could you point me on what I could sync from and that would be
> > > reasonably likely to work? :)
> >
> > If you checkout the master branch of both
> >
> > git://anongit.freedesktop.org/mesa/drm
> > and
> > git://anongit.freedesktop.org/xorg/driver/xf86-video-intel
> >
> > You should have a working driver.
>
> Hi folks,
>
> I got the chance to compile git and install it.
>
> I installed the 4 binaries like so:
> /usr/lib/libdrm_intel.so.1.0.0-git
> /usr/lib/xorg/modules/drivers/intel_drv.so-git
> /usr/lib/libdrm.so.2.4.0-git
> /usr/lib/libdrm_radeon.so.1.0.0-git
>
> and symlinked the ubuntu oneiric files to those new versions (moving the originals out
> fo the way).
>
> So everything works if I use all 4 binaries except intel_drv.so-git and
> link intel_drv.so to the binary from oneric.
>
> With driver 2.15.901, I still get the same crash than before:
> Core was generated by `/usr/bin/X :0 vt8 -nr -nolisten tcp -auth /var/run/xauth/A:0-TaSDmc'.
> Program terminated with signal 11, Segmentation fault.
> #0 0x0808266b in ?? ()
> (gdb) backtrace full
> #0 0x0808266b in ?? ()
> No symbol table info available.
> #1 0x0807fea0 in ProcUngrabKeyboard ()
> No symbol table info available.
> #2 0x08072117 in ?? ()
> No symbol table info available.
> #3 0x0806470c in ?? ()
> No symbol table info available.
> #4 0xb7422113 in __libc_start_main (main=0x80643a0, argc=8, ubp_av=0xbfe63454,
> init=0x81d7100 <__libc_csu_init>, fini=0x81d7170 <__libc_csu_fini>, rtld_fini=0xb7791bc0,
> stack_end=0xbfe6344c) at libc-start.c:226
> result = <optimized out>
> unwind_buf = {cancel_jmp_buf = {{jmp_buf = {-1218965516, 0, 0, 0, 1950853741, 1013026428},
> mask_was_saved = 0}}, priv = {pad = {0x0, 0x0, 0x8, 0x8064a00}, data = {prev = 0x0,
> cleanup = 0x0, canceltype = 8}}}
> not_first_call = <optimized out>
> #5 0x08064a21 in _start ()
> No symbol table info available.
>
> So, new versions of libdrm.so and libdrm_intel.so did not help.
>
> Unfortunately when I try to start X with 2.17.0, it just hard hangs to the
> point where the console is hung, but I can still reboot the machine, so it's not a hard
> linux hang.
> Is there better debug I can give or things I can try to see why X just hangs?
>
> If I change to a 64bit kernel, can I keep my 32bit userland and would this fix this
> problem I'm having here?
>
>
> [234673.242] (II) LoadModule: "intel"
> [234673.242] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
> [234673.265] (II) Module intel: vendor="X.Org Foundation"
> [234673.265] compiled for 1.10.4, module version = 2.17.0
> [234673.265] Module class: X.Org Video Driver
> [234673.265] ABI class: X.Org Video Driver, version 10.0
> [234673.266] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
> i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
> E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
> 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
> 4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
> Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
> Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
> Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
> Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
> Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server
> [234673.267] (--) using VT number 7
>
> [234673.278] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
> [234673.279] drmOpenDevice: node name is /dev/dri/card0
> [234673.279] drmOpenDevice: open result is 11, (OK)
> [234673.279] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
> [234673.279] drmOpenDevice: node name is /dev/dri/card0
> [234673.279] drmOpenDevice: open result is 11, (OK)
> [234673.279] drmOpenByBusid: drmOpenMinor returns 11
> [234673.279] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
> [234673.279] (==) intel(0): Depth 24, (--) framebuffer bpp 32
> [234673.279] (==) intel(0): RGB weight 888
> [234673.279] (==) intel(0): Default visual is TrueColor
> [234673.279] (II) intel(0): Integrated Graphics Chipset: Intel(R) GM45
> [234673.279] (--) intel(0): Chipset: "GM45"
> X hangs here ^^^^^^^
>
> With:
> 17 /usr/lib/libdrm_intel.so -> libdrm_intel.so.1*
> 21 /usr/lib/libdrm_intel.so.1 -> libdrm_intel.so.1.0.0*
> 25 /usr/lib/libdrm_intel.so.1.0.0 -> libdrm_intel.so.1.0.0-git*
> 135193 /usr/lib/libdrm_intel.so.1.0.0-git*
> 34148 /usr/lib/libdrm_intel.so.1.0.0.oneric
>
> 22 /usr/lib/libdrm_radeon.so -> libdrm_radeon.so.1.0.0*
> 31 /usr/lib/libdrm_radeon.so.1 -> /usr/lib/libdrm_radeon.so.1.0.0*
> 26 /usr/lib/libdrm_radeon.so.1.0.0 -> libdrm_radeon.so.1.0.0-git*
> 78245 /usr/lib/libdrm_radeon.so.1.0.0-git*
> 13760 /usr/lib/libdrm_radeon.so.1.0.0.oneric
>
> 15 /usr/lib/libdrm.so.2 -> libdrm.so.2.4.0*
> 19 /usr/lib/libdrm.so.2.4.0 -> libdrm.so.2.4.0-git*
> 129400 /usr/lib/libdrm.so.2.4.0-git*
> 34224 /usr/lib/libdrm.so.2.4.0.oneric
>
> 19 /usr/lib/xorg/modules/drivers/intel_drv.so -> intel_drv.so.oneric
> 443205 /usr/lib/xorg/modules/drivers/intel_drv.so-git*
> 327752 /usr/lib/xorg/modules/drivers/intel_drv.so.oneric
>
>
> For comparison, with driver 2.15.901, startup looks like this:
>
> [ 235.405] (II) LoadModule: "intel"
> [ 235.406] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
> [ 235.431] (II) Module intel: vendor="X.Org Foundation"
> [ 235.431] compiled for 1.10.4, module version = 2.15.901
> [ 235.431] Module class: X.Org Video Driver
> [ 235.431] ABI class: X.Org Video Driver, version 10.0
> [ 235.431] (II) LoadModule: "mouse"
> [ 235.432] (II) Loading /usr/lib/xorg/modules/input/mouse_drv.so
> [ 235.443] (II) Module mouse: vendor="X.Org Foundation"
> [ 235.443] compiled for 1.10.2.902, module version = 1.7.1
> [ 235.443] Module class: X.Org XInput Driver
> [ 235.443] ABI class: X.Org XInput driver, version 12.3
> [ 235.443] (II) LoadModule: "kbd"
> [ 235.443] (II) Loading /usr/lib/xorg/modules/input/kbd_drv.so
> [ 235.449] (II) Module kbd: vendor="X.Org Foundation"
> [ 235.449] compiled for 1.10.2, module version = 1.6.0
> [ 235.449] Module class: X.Org XInput Driver
> [ 235.449] ABI class: X.Org XInput driver, version 12.3
> [ 235.449] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
> i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
> E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
> 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
> 4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
> Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
> Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
> Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
> Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
> Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server
> [ 235.449] (++) using VT number 8
>
> [ 235.464] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
> [ 235.465] drmOpenDevice: node name is /dev/dri/card0
> [ 235.465] drmOpenDevice: open result is 9, (OK)
> [ 235.465] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
> [ 235.465] drmOpenDevice: node name is /dev/dri/card0
> [ 235.465] drmOpenDevice: open result is 9, (OK)
> [ 235.465] drmOpenByBusid: drmOpenMinor returns 9
> [ 235.465] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
> [ 235.465] (==) intel(0): Depth 24, (--) framebuffer bpp 32
> [ 235.465] (==) intel(0): RGB weight 888
> [ 235.465] (==) intel(0): Default visual is TrueColor
> [ 235.465] (II) intel(0): Integrated Graphics Chipset: Intel(R) GM45
> [ 235.465] (--) intel(0): Chipset: "GM45"
> [ 235.465] (**) intel(0): Relaxed fencing enabled
> [ 235.465] (**) intel(0): Wait on SwapBuffers? enabled
> [ 235.465] (**) intel(0): Triple buffering? enabled
> [ 235.465] (**) intel(0): Framebuffer tiled
> [ 235.465] (**) intel(0): Pixmaps tiled
> [ 235.465] (**) intel(0): 3D buffers tiled
> [ 235.465] (**) intel(0): SwapBuffers wait enabled
> [ 235.465] (==) intel(0): video overlay key set to 0x101fe
> [ 235.465] (II) intel(0): Output LVDS1 using monitor section Monitor0
> [ 235.465] (II) intel(0): found backlight control interface /sys/class/backlight/acpi_video0
> [ 235.482] (II) intel(0): Output VGA1 has no monitor section
> [ 235.494] (II) intel(0): Output DP1 has no monitor section
> [ 235.494] (II) intel(0): EDID for output LVDS1
> [ 235.494] (II) intel(0): Manufacturer: LEN Model: 4055 Serial#: 0
> [ 235.494] (II) intel(0): Year: 2007 Week: 0
> [ 235.494] (II) intel(0): EDID Version: 1.3
> [ 235.494] (II) intel(0): Digital Display Input
> [ 235.494] (II) intel(0): Max Image Size [cm]: horiz.: 33 vert.: 21
> [ 235.494] (II) intel(0): Gamma: 2.20
> [ 235.494] (II) intel(0): DPMS capabilities: StandBy Suspend Off
> [ 235.494] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
> [ 235.494] (II) intel(0): First detailed timing is preferred mode
> [ 235.494] (II) intel(0): redX: 0.580 redY: 0.340 greenX: 0.310 greenY: 0.550
> [ 235.494] (II) intel(0): blueX: 0.155 blueY: 0.155 whiteX: 0.313 whiteY: 0.329
> [ 235.494] (II) intel(0): Manufacturer's mask: 0
> [ 235.494] (II) intel(0): Supported detailed timing:
> [ 235.494] (II) intel(0): clock: 167.8 MHz Image Size: 331 x 207 mm
> [ 235.494] (II) intel(0): h_active: 1920 h_sync: 1968 h_sync_end 2000 h_blank_end 2298 h_border: 0
> [ 235.494] (II) intel(0): v_active: 1200 v_sync: 1203 v_sync_end 1206 v_blanking: 1217 v_border: 0
> [ 235.494] (II) intel(0): Supported detailed timing:
> [ 235.494] (II) intel(0): clock: 134.3 MHz Image Size: 331 x 207 mm
> [ 235.494] (II) intel(0): h_active: 1920 h_sync: 1968 h_sync_end 2000 h_blank_end 2208 h_border: 0
> [ 235.494] (II) intel(0): v_active: 1200 v_sync: 1202 v_sync_end 1208 v_blanking: 1220 v_border: 0
> [ 235.494] (II) intel(0): Unknown vendor-specific block f
> [ 235.494] (II) intel(0): LTN154U2-L05
> [ 235.494] (II) intel(0): EDID (in hex):
> [ 235.494] (II) intel(0): 00ffffffffffff0030ae554000000000
> [ 235.494] (II) intel(0): 0011010380211578ea87f594574f8c27
> [ 235.494] (II) intel(0): 27505400000001010101010101010101
> [ 235.494] (II) intel(0): 0101010101018c41807a71b011403020
> [ 235.494] (II) intel(0): 33004bcf100000197434802071b01440
> [ 235.494] (II) intel(0): 302026004bcf100000190000000f00d1
> [ 235.494] (II) intel(0): 0a32d10a281101004ca35532000000fe
> [ 235.494] (II) intel(0): 004c544e31353455322d4c30350a0011
> [ 235.494] (II) intel(0): EDID vendor "LEN", prod id 16469
> [ 235.494] (II) intel(0): Printing DDC gathered Modelines:
> [ 235.494] (II) intel(0): Modeline "1920x1200"x0.0 167.80 1920 1968 2000 2298 1200 1203 1206 1217 -hsync -vsync (73.0 kHz)
> [ 235.494] (II) intel(0): Modeline "1920x1200"x0.0 134.28 1920 1968 2000 2208 1200 1202 1208 1220 -hsync -vsync (60.8 kHz)
> [ 235.495] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
> [ 235.495] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
> [ 235.495] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
> [ 235.495] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
> [ 235.495] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
> [ 235.495] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
> [ 235.495] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
> [ 235.495] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
> [ 235.495] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
> [ 235.495] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
> [ 235.495] (II) intel(0): Not using default mode "576x432" (doublescan mode not supported)
> [ 235.495] (II) intel(0): Not using default mode "680x384" (doublescan mode not supported)
> [ 235.495] (II) intel(0): Not using default mode "680x384" (doublescan mode not supported)
> [ 235.495] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
> [ 235.495] (II) intel(0): Not using default mode "720x450" (doublescan mode not supported)
> [ 235.495] (II) intel(0): Not using default mode "800x512" (doublescan mode not supported)
> [ 235.495] (II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
> [ 235.495] (II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
> [ 235.495] (II) intel(0): Not using default mode "960x540" (doublescan mode not supported)
> [ 235.495] (II) intel(0): Not using default mode "960x600" (doublescan mode not supported)
> [ 235.495] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
> [ 235.495] (II) intel(0): Printing probed modes for output LVDS1
> [ 235.495] (II) intel(0): Modeline "1920x1200"x60.0 167.80 1920 1968 2000 2298 1200 1203 1206 1217 -hsync -vsync (73.0 kHz)
> [ 235.495] (II) intel(0): Modeline "1920x1200"x60.0 154.00 1920 1968 2000 2080 1200 1203 1209 1235 +hsync -vsync (74.0 kHz)
> [ 235.495] (II) intel(0): Modeline "1920x1200"x49.8 134.28 1920 1968 2000 2208 1200 1202 1208 1220 -hsync -vsync (60.8 kHz)
> [ 235.495] (II) intel(0): Modeline "1920x1080"x59.9 138.50 1920 1968 2000 2080 1080 1083 1088 1111 +hsync -vsync (66.6 kHz)
> [ 235.495] (II) intel(0): Modeline "1600x1200"x60.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz)
> [ 235.495] (II) intel(0): Modeline "1680x1050"x60.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
> [ 235.496] (II) intel(0): Modeline "1680x1050"x59.9 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz)
> [ 235.496] (II) intel(0): Modeline "1600x1024"x60.2 103.12 1600 1600 1656 1664 1024 1024 1029 1030 +hsync +vsync (62.0 kHz)
> [ 235.496] (II) intel(0): Modeline "1400x1050"x60.0 122.00 1400 1488 1640 1880 1050 1052 1064 1082 +hsync +vsync (64.9 kHz)
> [ 235.496] (II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
> [ 235.496] (II) intel(0): Modeline "1440x900"x59.9 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz)
> [ 235.496] (II) intel(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
> [ 235.496] (II) intel(0): Modeline "1360x768"x59.8 84.75 1360 1432 1568 1776 768 771 781 798 -hsync +vsync (47.7 kHz)
> [ 235.496] (II) intel(0): Modeline "1360x768"x60.0 72.00 1360 1408 1440 1520 768 771 781 790 +hsync -vsync (47.4 kHz)
> [ 235.496] (II) intel(0): Modeline "1152x864"x60.0 81.62 1152 1216 1336 1520 864 865 868 895 -hsync +vsync (53.7 kHz)
> [ 235.496] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
> [ 235.496] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
> [ 235.496] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
> [ 235.496] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
> [ 235.513] (II) intel(0): EDID for output VGA1
> [ 235.525] (II) intel(0): EDID for output DP1
> [ 235.525] (II) intel(0): Output LVDS1 connected
> [ 235.525] (II) intel(0): Output VGA1 disconnected
> [ 235.525] (II) intel(0): Output DP1 disconnected
> [ 235.525] (II) intel(0): Using exact sizes for initial modes
> [ 235.525] (II) intel(0): Output LVDS1 using initial mode 1920x1200
> [ 235.525] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
> [ 235.525] (II) intel(0): Kernel page flipping support detected, enabling
> [ 235.525] (**) intel(0): Display dimensions: (330, 210) mm
> [ 235.525] (**) intel(0): DPI set to (147, 145)
> [ 235.525] (II) Loading sub module "fb"
> [ 235.525] (II) LoadModule: "fb"
> [ 235.525] (II) Loading /usr/lib/xorg/modules/libfb.so
> [ 235.534] (II) Module fb: vendor="X.Org Foundation"
> [ 235.534] compiled for 1.10.4, module version = 1.0.0
> [ 235.534] ABI class: X.Org ANSI C Emulation, version 0.4
> [ 235.534] (II) Loading sub module "dri2"
> [ 235.534] (II) LoadModule: "dri2"
> [ 235.536] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
> [ 235.536] (II) Module dri2: vendor="X.Org Foundation"
> [ 235.536] compiled for 1.10.4, module version = 1.2.0
> [ 235.536] ABI class: X.Org Server Extension, version 5.0
> [ 235.536] (==) Depth 24 pixmap format is 32 bpp
> [ 235.536] (II) intel(0): [DRI2] Setup complete
> [ 235.536] (II) intel(0): [DRI2] DRI driver: i965
> [ 235.536] (II) intel(0): Allocated new frame buffer 1920x1200 stride 7680, tiled
> [ 235.566] (II) UXA(0): Driver registered support for the following operations:
> [ 235.567] (II) solid
> [ 235.567] (II) copy
> [ 235.567] (II) composite (RENDER acceleration)
> [ 235.567] (II) put_image
> [ 235.567] (II) get_image
> [ 235.567] (==) intel(0): Backing store disabled
> [ 235.567] (==) intel(0): Silken mouse enabled
> [ 235.568] (II) intel(0): Initializing HW Cursor
> [ 235.590] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
> [ 235.592] (==) intel(0): DPMS enabled
> [ 235.592] (==) intel(0): Intel XvMC decoder enabled
> [ 235.592] (II) intel(0): Set up textured video
> [ 235.592] (II) intel(0): [XvMC] xvmc_vld driver initialized.
> [ 235.592] (II) intel(0): direct rendering: DRI2 Enabled
> [ 235.592] (==) intel(0): hotplug detection: "enabled"
>
> --
> "A mouse is a device used to point at the xterm you want to type in" - A.S.R.
> Microsoft is to operating systems ....
> .... what McDonalds is to gourmet cooking
> Home page: http://marc.merlins.org/
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx@lists.freedesktop.org
> http://lists.freedesktop.org/mailman/listinfo/intel-gfx
--
"A mouse is a device used to point at the xterm you want to type in" - A.S.R.
Microsoft is to operating systems ....
.... what McDonalds is to gourmet cooking
Home page: http://marc.merlins.org/
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: More crashes with intel driver 1.10.4 and corrupted stack traces for GM45
2011-12-13 22:13 ` Marc MERLIN
2011-12-13 23:04 ` Daniel Vetter
@ 2011-12-13 23:16 ` Chris Wilson
1 sibling, 0 replies; 8+ messages in thread
From: Chris Wilson @ 2011-12-13 23:16 UTC (permalink / raw)
To: Marc MERLIN, intel-gfx
On Tue, 13 Dec 2011 14:13:18 -0800, Marc MERLIN <marc_xorg@merlins.org> wrote:
> On Sun, Dec 11, 2011 at 12:32:00PM -0800, Marc MERLIN wrote:
> > Hi Eugeni and other folks on this list,
>
> Am I sending this to the wrong place or is GM45 unsupported?
Apologies, it is a known issue. I was thrown by the bizarre stack trace,
but it seems like it just the mmap failure blowing up in spectacular
fashion. The ENOSPC issues arises from when we have either exhausted
or badly fragmented the (on your system presumably) 32-bits of address
space for GTT mappings such that we are no longer able to allocate new
ones. I have recently begun to take a similar issue whereby we exhausted
the per-process map limit with over 65,000 vma keep open. The solution
there of capping the number of cached vma is likely to resolve this
problem as well.
-Chris
--
Chris Wilson, Intel Open Source Technology Centre
^ permalink raw reply [flat|nested] 8+ messages in thread
end of thread, other threads:[~2012-01-01 21:40 UTC | newest]
Thread overview: 8+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2011-12-11 20:32 More crashes with intel driver 1.10.4 and corrupted stack traces for GM45 Marc MERLIN
2011-12-13 22:13 ` Marc MERLIN
2011-12-13 23:04 ` Daniel Vetter
2011-12-14 3:05 ` Marc MERLIN
2011-12-14 8:36 ` Chris Wilson
2011-12-26 23:15 ` intel_drv 2.17.0 hangs X at boot while 2.15.901 works but crashes (GM45) Marc MERLIN
2012-01-01 21:40 ` Marc MERLIN
2011-12-13 23:16 ` More crashes with intel driver 1.10.4 and corrupted stack traces for GM45 Chris Wilson
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox