Re: [PATCH-v2 0/3] drm/i915: interlaced mode support

[Jesse Barnes <jbarnes@virtuousgeek.org>]

[-- Attachment #1.1: Type: text/plain, Size: 1414 bytes --]

On Thu, 19 Jan 2012 00:29:23 +1100
Peter Ross <pross@xvid.org> wrote:

> This patch set enables enables interlaced mode output on
> generation 3 and above chipsets.
> 
> History here: https://bugs.freedesktop.org/show_bug.cgi?id=11220
> 
> It has been tested on the following hardware:
> * ASUS P5E-VM-HDMI (G35_G) and LG 32FS4D (VGA and SDVO connectors)
> * Intel DQ45CB (Q45_G) and Sony GDM 5411 (VGA connector)
> * Toshiba Portege R500 (I935_GM) and Sony GDM 5411 CRT (VGA connector)
> 
> PATCH HISTORY
> Version 1. Initial cut.
> Version 2. Set timings for gen3 and ILK/SB chipsets.
>            Allow interlaced output on HDMI connector.
> 
> Peter Ross (3):
>   drm/i915: specify vertical timings in frame units for interlaced
>     modes (gen3+)
>   drm/i915: allow interlaced mode output on the SDVO connector
>   drm/i915: allow interlaced mode output on the HDMI connector
> 
>  drivers/gpu/drm/i915/intel_display.c |   14 ++++++++++++++
>  drivers/gpu/drm/i915/intel_hdmi.c    |    2 +-
>  drivers/gpu/drm/i915/intel_sdvo.c    |    2 +-
>  3 files changed, 16 insertions(+), 2 deletions(-)

Cool, this series looks good.

Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>

Yi, can you give these patches a try with interlaced modes on SDVO and
HDMI attached displays and reply with your tested-by?

Thanks,
-- 
Jesse Barnes, Intel Open Source Technology Center

[-- Attachment #1.2: signature.asc --]
[-- Type: application/pgp-signature, Size: 836 bytes --]

[-- Attachment #2: Type: text/plain, Size: 159 bytes --]

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx