[PATCH] drm/i915: Unpin the flip target if we fail to queue the flip

[PATCH] drm/i915: Unpin the flip target if we fail to queue the flip

[Chris Wilson]

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
---
 drivers/gpu/drm/i915/intel_display.c |   50 ++++++++++++++++++++++++----------
 1 file changed, 35 insertions(+), 15 deletions(-)

diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 85f1814..b2c29a5 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -7761,14 +7761,14 @@ static int intel_gen2_queue_flip(struct drm_device *dev,
 
 	ret = intel_pin_and_fence_fb_obj(dev, obj, LP_RING(dev_priv));
 	if (ret)
-		goto out;
+		goto err;
 
 	/* Offset into the new buffer for cases of shared fbs between CRTCs */
 	offset = crtc->y * fb->pitches[0] + crtc->x * fb->bits_per_pixel/8;
 
 	ret = BEGIN_LP_RING(6);
 	if (ret)
-		goto out;
+		goto err_unpin;
 
 	/* Can't queue multiple flips, so wait for the previous
 	 * one to finish before executing the next.
@@ -7785,7 +7785,11 @@ static int intel_gen2_queue_flip(struct drm_device *dev,
 	OUT_RING(obj->gtt_offset + offset);
 	OUT_RING(0); /* aux display base address, unused */
 	ADVANCE_LP_RING();
-out:
+	return 0;
+
+err_unpin:
+	intel_unpin_fb_obj(obj);
+err:
 	return ret;
 }
 
@@ -7802,14 +7806,14 @@ static int intel_gen3_queue_flip(struct drm_device *dev,
 
 	ret = intel_pin_and_fence_fb_obj(dev, obj, LP_RING(dev_priv));
 	if (ret)
-		goto out;
+		goto err;
 
 	/* Offset into the new buffer for cases of shared fbs between CRTCs */
 	offset = crtc->y * fb->pitches[0] + crtc->x * fb->bits_per_pixel/8;
 
 	ret = BEGIN_LP_RING(6);
 	if (ret)
-		goto out;
+		goto err_unpin;
 
 	if (intel_crtc->plane)
 		flip_mask = MI_WAIT_FOR_PLANE_B_FLIP;
@@ -7824,7 +7828,11 @@ static int intel_gen3_queue_flip(struct drm_device *dev,
 	OUT_RING(MI_NOOP);
 
 	ADVANCE_LP_RING();
-out:
+	return 0;
+
+err_unpin:
+	intel_unpin_fb_obj(obj);
+err:
 	return ret;
 }
 
@@ -7840,11 +7848,11 @@ static int intel_gen4_queue_flip(struct drm_device *dev,
 
 	ret = intel_pin_and_fence_fb_obj(dev, obj, LP_RING(dev_priv));
 	if (ret)
-		goto out;
+		goto err;
 
 	ret = BEGIN_LP_RING(4);
 	if (ret)
-		goto out;
+		goto err_unpin;
 
 	/* i965+ uses the linear or tiled offsets from the
 	 * Display Registers (which do not change across a page-flip)
@@ -7863,7 +7871,11 @@ static int intel_gen4_queue_flip(struct drm_device *dev,
 	pipesrc = I915_READ(PIPESRC(intel_crtc->pipe)) & 0x0fff0fff;
 	OUT_RING(pf | pipesrc);
 	ADVANCE_LP_RING();
-out:
+	return 0;
+
+err_unpin:
+	intel_unpin_fb_obj(obj);
+err:
 	return ret;
 }
 
@@ -7879,11 +7891,11 @@ static int intel_gen6_queue_flip(struct drm_device *dev,
 
 	ret = intel_pin_and_fence_fb_obj(dev, obj, LP_RING(dev_priv));
 	if (ret)
-		goto out;
+		goto err;
 
 	ret = BEGIN_LP_RING(4);
 	if (ret)
-		goto out;
+		goto err_unpin;
 
 	OUT_RING(MI_DISPLAY_FLIP |
 		 MI_DISPLAY_FLIP_PLANE(intel_crtc->plane));
@@ -7894,7 +7906,11 @@ static int intel_gen6_queue_flip(struct drm_device *dev,
 	pipesrc = I915_READ(PIPESRC(intel_crtc->pipe)) & 0x0fff0fff;
 	OUT_RING(pf | pipesrc);
 	ADVANCE_LP_RING();
-out:
+	return 0;
+
+err_unpin:
+	intel_unpin_fb_obj(obj);
+err:
 	return ret;
 }
 
@@ -7920,18 +7936,22 @@ static int intel_gen7_queue_flip(struct drm_device *dev,
 
 	ret = intel_pin_and_fence_fb_obj(dev, obj, ring);
 	if (ret)
-		goto out;
+		goto err;
 
 	ret = intel_ring_begin(ring, 4);
 	if (ret)
-		goto out;
+		goto err_unpin;
 
 	intel_ring_emit(ring, MI_DISPLAY_FLIP_I915 | (intel_crtc->plane << 19));
 	intel_ring_emit(ring, (fb->pitches[0] | obj->tiling_mode));
 	intel_ring_emit(ring, (obj->gtt_offset));
 	intel_ring_emit(ring, (MI_NOOP));
 	intel_ring_advance(ring);
-out:
+	return 0;
+
+err_unpin:
+	intel_unpin_fb_obj(obj);
+err:
 	return ret;
 }
 
-- 
1.7.10

Re: [PATCH] drm/i915: Unpin the flip target if we fail to queue the flip

[Daniel Vetter]

On Tue, Apr 17, 2012 at 07:35:53PM +0100, Chris Wilson wrote:
> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
> Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Queued for -next, thanks for the patch.
-Daniel
-- 
Daniel Vetter
Mail: daniel@ffwll.ch
Mobile: +41 (0)79 365 57 48