From: "Ville Syrjälä" <ville.syrjala@linux.intel.com>
To: Jesse Barnes <jbarnes@virtuousgeek.org>
Cc: intel-gfx@lists.freedesktop.org
Subject: Re: [PATCH 24/26] drm/i915: VLV doesn't have HDMI on port C
Date: Tue, 19 Mar 2013 15:00:51 +0200 [thread overview]
Message-ID: <20130319130051.GL4469@intel.com> (raw)
In-Reply-To: <1362175722-9281-24-git-send-email-jbarnes@virtuousgeek.org>
On Fri, Mar 01, 2013 at 02:08:40PM -0800, Jesse Barnes wrote:
> Port C is for eDP. Port B is shared between HDMI and DP.
My docs are telling me ports B and C should support everything. Is this
just a board level restriction?
> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
> ---
> drivers/gpu/drm/i915/intel_display.c | 2 --
> 1 file changed, 2 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
> index 022349b..1a4a19e 100644
> --- a/drivers/gpu/drm/i915/intel_display.c
> +++ b/drivers/gpu/drm/i915/intel_display.c
> @@ -8564,8 +8564,6 @@ static void intel_setup_outputs(struct drm_device *dev)
> if (I915_READ(VLV_DISPLAY_BASE + DP_B) & DP_DETECTED)
> intel_dp_init(dev, VLV_DISPLAY_BASE + DP_B, PORT_B);
> }
> - if (I915_READ(VLV_DISPLAY_BASE + SDVOC) & PORT_DETECTED)
> - intel_hdmi_init(dev, VLV_DISPLAY_BASE + SDVOC, PORT_C);
> } else if (SUPPORTS_DIGITAL_OUTPUTS(dev)) {
> bool found = false;
>
> --
> 1.7.9.5
>
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx@lists.freedesktop.org
> http://lists.freedesktop.org/mailman/listinfo/intel-gfx
--
Ville Syrjälä
Intel OTC
next prev parent reply other threads:[~2013-03-19 13:01 UTC|newest]
Thread overview: 62+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-03-01 22:08 [PATCH 01/26] drm/i915: sprite support for ValleyView Jesse Barnes
2013-03-01 22:08 ` [PATCH 02/26] drm/i915: add sprite assertion function for VLV Jesse Barnes
2013-03-01 22:08 ` [PATCH 03/26] drm/i915: add constant alpha support to sprite ioctl Jesse Barnes
2013-03-01 22:08 ` [PATCH 04/26] drm/i915: update VLV PLL and DPIO code Jesse Barnes
2013-03-01 22:19 ` Jesse Barnes
2013-03-01 22:19 ` Jesse Barnes
2013-03-03 16:21 ` Daniel Vetter
2013-03-05 15:05 ` Jani Nikula
2013-03-08 13:33 ` Jani Nikula
2013-03-08 16:52 ` Jesse Barnes
2013-03-01 22:08 ` [PATCH 05/26] drm/i915: panel power sequencing for VLV eDP Jesse Barnes
2013-03-08 13:51 ` Jani Nikula
2013-03-08 16:53 ` Jesse Barnes
2013-03-01 22:08 ` [PATCH 06/26] drm/i915: add more VLV IDs Jesse Barnes
2013-03-01 22:08 ` [PATCH 07/26] drm/i915: implement WaDisablePSDDualDispatchEnable on VLV Jesse Barnes
2013-03-06 18:20 ` Ville Syrjälä
2013-03-06 18:28 ` Jesse Barnes
2013-03-01 22:08 ` [PATCH 08/26] drm/i915: VLV has force wake Jesse Barnes
2013-03-01 22:08 ` [PATCH 09/26] drm/i915: add power context allocation and setup on VLV Jesse Barnes
2013-03-05 15:10 ` Jani Nikula
2013-03-07 22:56 ` Jesse Barnes
2013-03-01 22:08 ` [PATCH 10/26] drm/i915: add more clock gating for VLV, allow force wake at init Jesse Barnes
2013-03-08 13:39 ` Jani Nikula
2013-03-08 16:52 ` Jesse Barnes
2013-03-08 17:06 ` Ville Syrjälä
2013-03-08 17:08 ` Jesse Barnes
2013-03-01 22:08 ` [PATCH 11/26] drm/i915: fix VLV limits and m/n/p calculations Jesse Barnes
2013-03-05 12:56 ` Daniel Vetter
2013-03-07 21:41 ` Jesse Barnes
2013-03-01 22:08 ` [PATCH 12/26] drm/i915: disable watermarks on VLV, pondicherry takes care of this Jesse Barnes
2013-03-01 22:08 ` [PATCH 13/26] drm/i915: use gen6 stolen check on VLV Jesse Barnes
2013-03-06 18:45 ` Ville Syrjälä
2013-03-06 19:07 ` Daniel Vetter
2013-03-01 22:08 ` [PATCH 14/26] drm/i915: add Punit read/write routines for VLV Jesse Barnes
2013-03-01 22:08 ` [PATCH 15/26] drm/i915: add media well to VLV force wake routines Jesse Barnes
2013-03-06 18:28 ` Ville Syrjälä
2013-03-06 18:33 ` Jesse Barnes
2013-03-06 18:52 ` Ville Syrjälä
2013-03-06 19:10 ` Daniel Vetter
2013-03-06 20:53 ` Jesse Barnes
2013-03-01 22:08 ` [PATCH 16/26] drm/i915: turbo & RC6 support for VLV Jesse Barnes
2013-03-06 10:51 ` Rohit Jain
2013-03-07 22:27 ` Jesse Barnes
2013-03-11 6:21 ` Jain, Rohit
2013-03-01 22:08 ` [PATCH 17/26] drm/i915: remove VLV MSI IRQ hack Jesse Barnes
2013-04-26 21:40 ` Daniel Vetter
2013-03-01 22:08 ` [PATCH 18/26] drm/i915: don't enumerate VGA on VLV Jesse Barnes
2013-03-01 22:08 ` [PATCH 19/26] drm/i915: DSPFW and BLC regs are in the display offset range Jesse Barnes
2013-03-08 13:57 ` Jani Nikula
2013-03-08 16:54 ` Jesse Barnes
2013-03-01 22:08 ` [PATCH 20/26] drm/i915: don't use plane pipe select on VLV Jesse Barnes
2013-03-01 22:08 ` [PATCH 21/26] drm/i915: use VLV DIP routines " Jesse Barnes
2013-03-01 22:08 ` [PATCH 22/26] drm/i915: export intel_dpio_write for use in intel_dp.c Jesse Barnes
2013-03-01 22:08 ` [PATCH 23/26] drm/i915/dp: program VSwing and Preemphasis control settings on VLV Jesse Barnes
2013-03-01 22:08 ` [PATCH 24/26] drm/i915: VLV doesn't have HDMI on port C Jesse Barnes
2013-03-19 13:00 ` Ville Syrjälä [this message]
2013-03-19 15:27 ` Jesse Barnes
2013-03-01 22:08 ` [PATCH 25/26] drm/i915/dp: don't use ILK paths on VLV Jesse Barnes
2013-03-08 14:12 ` Jani Nikula
2013-03-08 14:57 ` Ville Syrjälä
2013-03-01 22:08 ` [PATCH 26/26] drm/i915/dp: add pre-PCH eDP checking to DP detect for VLV Jesse Barnes
2013-03-08 14:16 ` [PATCH 01/26] drm/i915: sprite support for ValleyView Jani Nikula
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20130319130051.GL4469@intel.com \
--to=ville.syrjala@linux.intel.com \
--cc=intel-gfx@lists.freedesktop.org \
--cc=jbarnes@virtuousgeek.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox