* [PATCH 1/2] drm/atomic: Update old_fb after setting a property.
@ 2015-06-24 6:59 Maarten Lankhorst
2015-06-24 6:59 ` [PATCH 2/2] drm/atomic: Cleanup on error properly in the atomic ioctl Maarten Lankhorst
2015-07-02 14:26 ` [PATCH 1/2] drm/atomic: Update old_fb after setting a property Rob Clark
0 siblings, 2 replies; 4+ messages in thread
From: Maarten Lankhorst @ 2015-06-24 6:59 UTC (permalink / raw)
To: dri-devel; +Cc: intel-gfx
This change updates the old_fb pointer only after acquiring the plane lock,
if there are no properties the fb cannot have been changed either, so
this works out correctly.
Found in a discussion with Rob Clark.
Cc: Rob Clark <robdclark@gmail.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
---
drivers/gpu/drm/drm_atomic.c | 12 ++++++------
1 file changed, 6 insertions(+), 6 deletions(-)
diff --git a/drivers/gpu/drm/drm_atomic.c b/drivers/gpu/drm/drm_atomic.c
index f6f2fb58eb37..bd7f723c708e 100644
--- a/drivers/gpu/drm/drm_atomic.c
+++ b/drivers/gpu/drm/drm_atomic.c
@@ -1472,12 +1472,6 @@ retry:
goto fail;
}
- if (obj->type == DRM_MODE_OBJECT_PLANE) {
- plane = obj_to_plane(obj);
- plane_mask |= (1 << drm_plane_index(plane));
- plane->old_fb = plane->fb;
- }
-
if (get_user(count_props, count_props_ptr + copied_objs)) {
ret = -EFAULT;
goto fail;
@@ -1514,6 +1508,12 @@ retry:
copied_props++;
}
+
+ if (obj->type == DRM_MODE_OBJECT_PLANE && count_props) {
+ plane = obj_to_plane(obj);
+ plane_mask |= (1 << drm_plane_index(plane));
+ plane->old_fb = plane->fb;
+ }
}
if (arg->flags & DRM_MODE_PAGE_FLIP_EVENT) {
--
2.1.0
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply related [flat|nested] 4+ messages in thread
* [PATCH 2/2] drm/atomic: Cleanup on error properly in the atomic ioctl.
2015-06-24 6:59 [PATCH 1/2] drm/atomic: Update old_fb after setting a property Maarten Lankhorst
@ 2015-06-24 6:59 ` Maarten Lankhorst
2015-07-07 6:56 ` Daniel Vetter
2015-07-02 14:26 ` [PATCH 1/2] drm/atomic: Update old_fb after setting a property Rob Clark
1 sibling, 1 reply; 4+ messages in thread
From: Maarten Lankhorst @ 2015-06-24 6:59 UTC (permalink / raw)
To: dri-devel; +Cc: intel-gfx
It's probably allowed to leave old_fb set to garbage when unlocking,
but to prevent undefined behavior unset it just in case.
Also crtc_state->event could be NULL on memory allocation failure,
in which case event_space is increased for no reason.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
---
drivers/gpu/drm/drm_atomic.c | 63 ++++++++++++++++++++------------------------
1 file changed, 29 insertions(+), 34 deletions(-)
diff --git a/drivers/gpu/drm/drm_atomic.c b/drivers/gpu/drm/drm_atomic.c
index bd7f723c708e..a89f73f1dca1 100644
--- a/drivers/gpu/drm/drm_atomic.c
+++ b/drivers/gpu/drm/drm_atomic.c
@@ -1463,18 +1463,18 @@ retry:
if (get_user(obj_id, objs_ptr + copied_objs)) {
ret = -EFAULT;
- goto fail;
+ goto out;
}
obj = drm_mode_object_find(dev, obj_id, DRM_MODE_OBJECT_ANY);
if (!obj || !obj->properties) {
ret = -ENOENT;
- goto fail;
+ goto out;
}
if (get_user(count_props, count_props_ptr + copied_objs)) {
ret = -EFAULT;
- goto fail;
+ goto out;
}
copied_objs++;
@@ -1486,25 +1486,25 @@ retry:
if (get_user(prop_id, props_ptr + copied_props)) {
ret = -EFAULT;
- goto fail;
+ goto out;
}
prop = drm_property_find(dev, prop_id);
if (!prop) {
ret = -ENOENT;
- goto fail;
+ goto out;
}
if (copy_from_user(&prop_value,
prop_values_ptr + copied_props,
sizeof(prop_value))) {
ret = -EFAULT;
- goto fail;
+ goto out;
}
ret = atomic_set_prop(state, obj, prop, prop_value);
if (ret)
- goto fail;
+ goto out;
copied_props++;
}
@@ -1523,7 +1523,7 @@ retry:
e = create_vblank_event(dev, file_priv, arg->user_data);
if (!e) {
ret = -ENOMEM;
- goto fail;
+ goto out;
}
crtc_state->event = e;
@@ -1533,13 +1533,15 @@ retry:
if (arg->flags & DRM_MODE_ATOMIC_TEST_ONLY) {
ret = drm_atomic_check_only(state);
/* _check_only() does not free state, unlike _commit() */
- drm_atomic_state_free(state);
+ if (!ret)
+ drm_atomic_state_free(state);
} else if (arg->flags & DRM_MODE_ATOMIC_NONBLOCK) {
ret = drm_atomic_async_commit(state);
} else {
ret = drm_atomic_commit(state);
}
+out:
/* if succeeded, fixup legacy plane crtc/fb ptrs before dropping
* locks (ie. while it is still safe to deref plane->state). We
* need to do this here because the driver entry points cannot
@@ -1552,41 +1554,34 @@ retry:
drm_framebuffer_reference(new_fb);
plane->fb = new_fb;
plane->crtc = plane->state->crtc;
- } else {
- plane->old_fb = NULL;
- }
- if (plane->old_fb) {
- drm_framebuffer_unreference(plane->old_fb);
- plane->old_fb = NULL;
+
+ if (plane->old_fb)
+ drm_framebuffer_unreference(plane->old_fb);
}
+ plane->old_fb = NULL;
}
- drm_modeset_drop_locks(&ctx);
- drm_modeset_acquire_fini(&ctx);
-
- return ret;
+ if (ret == -EDEADLK) {
+ drm_atomic_state_clear(state);
+ drm_modeset_backoff(&ctx);
+ goto retry;
+ }
-fail:
- if (ret == -EDEADLK)
- goto backoff;
+ if (ret) {
+ if (arg->flags & DRM_MODE_PAGE_FLIP_EVENT) {
+ for_each_crtc_in_state(state, crtc, crtc_state, i) {
+ if (!crtc_state->event)
+ continue;
- if (arg->flags & DRM_MODE_PAGE_FLIP_EVENT) {
- for_each_crtc_in_state(state, crtc, crtc_state, i) {
- destroy_vblank_event(dev, file_priv, crtc_state->event);
- crtc_state->event = NULL;
+ destroy_vblank_event(dev, file_priv, crtc_state->event);
+ }
}
- }
- drm_atomic_state_free(state);
+ drm_atomic_state_free(state);
+ }
drm_modeset_drop_locks(&ctx);
drm_modeset_acquire_fini(&ctx);
return ret;
-
-backoff:
- drm_atomic_state_clear(state);
- drm_modeset_backoff(&ctx);
-
- goto retry;
}
--
2.1.0
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
^ permalink raw reply related [flat|nested] 4+ messages in thread
* Re: [PATCH 1/2] drm/atomic: Update old_fb after setting a property.
2015-06-24 6:59 [PATCH 1/2] drm/atomic: Update old_fb after setting a property Maarten Lankhorst
2015-06-24 6:59 ` [PATCH 2/2] drm/atomic: Cleanup on error properly in the atomic ioctl Maarten Lankhorst
@ 2015-07-02 14:26 ` Rob Clark
1 sibling, 0 replies; 4+ messages in thread
From: Rob Clark @ 2015-07-02 14:26 UTC (permalink / raw)
To: Maarten Lankhorst
Cc: Intel Graphics Development, dri-devel@lists.freedesktop.org
On Wed, Jun 24, 2015 at 2:59 AM, Maarten Lankhorst
<maarten.lankhorst@linux.intel.com> wrote:
> This change updates the old_fb pointer only after acquiring the plane lock,
> if there are no properties the fb cannot have been changed either, so
> this works out correctly.
>
> Found in a discussion with Rob Clark.
>
> Cc: Rob Clark <robdclark@gmail.com>
> Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Rob Clark <robdclark@gmail.com>
> ---
> drivers/gpu/drm/drm_atomic.c | 12 ++++++------
> 1 file changed, 6 insertions(+), 6 deletions(-)
>
> diff --git a/drivers/gpu/drm/drm_atomic.c b/drivers/gpu/drm/drm_atomic.c
> index f6f2fb58eb37..bd7f723c708e 100644
> --- a/drivers/gpu/drm/drm_atomic.c
> +++ b/drivers/gpu/drm/drm_atomic.c
> @@ -1472,12 +1472,6 @@ retry:
> goto fail;
> }
>
> - if (obj->type == DRM_MODE_OBJECT_PLANE) {
> - plane = obj_to_plane(obj);
> - plane_mask |= (1 << drm_plane_index(plane));
> - plane->old_fb = plane->fb;
> - }
> -
> if (get_user(count_props, count_props_ptr + copied_objs)) {
> ret = -EFAULT;
> goto fail;
> @@ -1514,6 +1508,12 @@ retry:
>
> copied_props++;
> }
> +
> + if (obj->type == DRM_MODE_OBJECT_PLANE && count_props) {
> + plane = obj_to_plane(obj);
> + plane_mask |= (1 << drm_plane_index(plane));
> + plane->old_fb = plane->fb;
> + }
> }
>
> if (arg->flags & DRM_MODE_PAGE_FLIP_EVENT) {
> --
> 2.1.0
>
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [PATCH 2/2] drm/atomic: Cleanup on error properly in the atomic ioctl.
2015-06-24 6:59 ` [PATCH 2/2] drm/atomic: Cleanup on error properly in the atomic ioctl Maarten Lankhorst
@ 2015-07-07 6:56 ` Daniel Vetter
0 siblings, 0 replies; 4+ messages in thread
From: Daniel Vetter @ 2015-07-07 6:56 UTC (permalink / raw)
To: Maarten Lankhorst; +Cc: intel-gfx, dri-devel
On Wed, Jun 24, 2015 at 08:59:25AM +0200, Maarten Lankhorst wrote:
> It's probably allowed to leave old_fb set to garbage when unlocking,
> but to prevent undefined behavior unset it just in case.
>
> Also crtc_state->event could be NULL on memory allocation failure,
> in which case event_space is increased for no reason.
>
> Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Grumpy reviewer comment: You've failed to mention that you rework a few
things just because, makes it harder to spot the actual changes. Anyway,
applied to drm-misc.
-Daniel
> ---
> drivers/gpu/drm/drm_atomic.c | 63 ++++++++++++++++++++------------------------
> 1 file changed, 29 insertions(+), 34 deletions(-)
>
> diff --git a/drivers/gpu/drm/drm_atomic.c b/drivers/gpu/drm/drm_atomic.c
> index bd7f723c708e..a89f73f1dca1 100644
> --- a/drivers/gpu/drm/drm_atomic.c
> +++ b/drivers/gpu/drm/drm_atomic.c
> @@ -1463,18 +1463,18 @@ retry:
>
> if (get_user(obj_id, objs_ptr + copied_objs)) {
> ret = -EFAULT;
> - goto fail;
> + goto out;
> }
>
> obj = drm_mode_object_find(dev, obj_id, DRM_MODE_OBJECT_ANY);
> if (!obj || !obj->properties) {
> ret = -ENOENT;
> - goto fail;
> + goto out;
> }
>
> if (get_user(count_props, count_props_ptr + copied_objs)) {
> ret = -EFAULT;
> - goto fail;
> + goto out;
> }
>
> copied_objs++;
> @@ -1486,25 +1486,25 @@ retry:
>
> if (get_user(prop_id, props_ptr + copied_props)) {
> ret = -EFAULT;
> - goto fail;
> + goto out;
> }
>
> prop = drm_property_find(dev, prop_id);
> if (!prop) {
> ret = -ENOENT;
> - goto fail;
> + goto out;
> }
>
> if (copy_from_user(&prop_value,
> prop_values_ptr + copied_props,
> sizeof(prop_value))) {
> ret = -EFAULT;
> - goto fail;
> + goto out;
> }
>
> ret = atomic_set_prop(state, obj, prop, prop_value);
> if (ret)
> - goto fail;
> + goto out;
>
> copied_props++;
> }
> @@ -1523,7 +1523,7 @@ retry:
> e = create_vblank_event(dev, file_priv, arg->user_data);
> if (!e) {
> ret = -ENOMEM;
> - goto fail;
> + goto out;
> }
>
> crtc_state->event = e;
> @@ -1533,13 +1533,15 @@ retry:
> if (arg->flags & DRM_MODE_ATOMIC_TEST_ONLY) {
> ret = drm_atomic_check_only(state);
> /* _check_only() does not free state, unlike _commit() */
> - drm_atomic_state_free(state);
> + if (!ret)
> + drm_atomic_state_free(state);
> } else if (arg->flags & DRM_MODE_ATOMIC_NONBLOCK) {
> ret = drm_atomic_async_commit(state);
> } else {
> ret = drm_atomic_commit(state);
> }
>
> +out:
> /* if succeeded, fixup legacy plane crtc/fb ptrs before dropping
> * locks (ie. while it is still safe to deref plane->state). We
> * need to do this here because the driver entry points cannot
> @@ -1552,41 +1554,34 @@ retry:
> drm_framebuffer_reference(new_fb);
> plane->fb = new_fb;
> plane->crtc = plane->state->crtc;
> - } else {
> - plane->old_fb = NULL;
> - }
> - if (plane->old_fb) {
> - drm_framebuffer_unreference(plane->old_fb);
> - plane->old_fb = NULL;
> +
> + if (plane->old_fb)
> + drm_framebuffer_unreference(plane->old_fb);
> }
> + plane->old_fb = NULL;
> }
>
> - drm_modeset_drop_locks(&ctx);
> - drm_modeset_acquire_fini(&ctx);
> -
> - return ret;
> + if (ret == -EDEADLK) {
> + drm_atomic_state_clear(state);
> + drm_modeset_backoff(&ctx);
> + goto retry;
> + }
>
> -fail:
> - if (ret == -EDEADLK)
> - goto backoff;
> + if (ret) {
> + if (arg->flags & DRM_MODE_PAGE_FLIP_EVENT) {
> + for_each_crtc_in_state(state, crtc, crtc_state, i) {
> + if (!crtc_state->event)
> + continue;
>
> - if (arg->flags & DRM_MODE_PAGE_FLIP_EVENT) {
> - for_each_crtc_in_state(state, crtc, crtc_state, i) {
> - destroy_vblank_event(dev, file_priv, crtc_state->event);
> - crtc_state->event = NULL;
> + destroy_vblank_event(dev, file_priv, crtc_state->event);
> + }
> }
> - }
>
> - drm_atomic_state_free(state);
> + drm_atomic_state_free(state);
> + }
>
> drm_modeset_drop_locks(&ctx);
> drm_modeset_acquire_fini(&ctx);
>
> return ret;
> -
> -backoff:
> - drm_atomic_state_clear(state);
> - drm_modeset_backoff(&ctx);
> -
> - goto retry;
> }
> --
> 2.1.0
>
> _______________________________________________
> dri-devel mailing list
> dri-devel@lists.freedesktop.org
> http://lists.freedesktop.org/mailman/listinfo/dri-devel
--
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2015-07-07 6:53 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2015-06-24 6:59 [PATCH 1/2] drm/atomic: Update old_fb after setting a property Maarten Lankhorst
2015-06-24 6:59 ` [PATCH 2/2] drm/atomic: Cleanup on error properly in the atomic ioctl Maarten Lankhorst
2015-07-07 6:56 ` Daniel Vetter
2015-07-02 14:26 ` [PATCH 1/2] drm/atomic: Update old_fb after setting a property Rob Clark
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox