Intel-GFX Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: "Ville Syrjälä" <ville.syrjala@linux.intel.com>
To: Jani Nikula <jani.nikula@intel.com>
Cc: Deepak M <m.deepak@intel.com>, intel-gfx@lists.freedesktop.org
Subject: Re: [PATCH v2 3/6] drm/i915: abstract get config for cpu transcoder
Date: Fri, 18 Mar 2016 17:31:16 +0200	[thread overview]
Message-ID: <20160318153116.GJ4329@intel.com> (raw)
In-Reply-To: <c473a73d69dcd61584419d85ff7908a8717b0594.1458313400.git.jani.nikula@intel.com>

On Fri, Mar 18, 2016 at 05:05:41PM +0200, Jani Nikula wrote:
> Makes it neater to add the same for DSI transcoder. No functional
> changes.
> 
> v2: rename to hsw_get_transcoder_state and add a comment about grabbing
>     power reference (Ville)
> 
> Signed-off-by: Jani Nikula <jani.nikula@intel.com>

Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>

> ---
>  drivers/gpu/drm/i915/intel_display.c | 87 +++++++++++++++++++++---------------
>  1 file changed, 51 insertions(+), 36 deletions(-)
> 
> diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
> index eece50ed3ea6..98d8b563b9a1 100644
> --- a/drivers/gpu/drm/i915/intel_display.c
> +++ b/drivers/gpu/drm/i915/intel_display.c
> @@ -9910,6 +9910,53 @@ static void haswell_get_ddi_pll(struct drm_i915_private *dev_priv,
>  	pipe_config->shared_dpll = intel_get_shared_dpll_by_id(dev_priv, id);
>  }
>  
> +static bool hsw_get_transcoder_state(struct intel_crtc *crtc,
> +				     struct intel_crtc_state *pipe_config,
> +				     unsigned long *power_domain_mask)
> +{
> +	struct drm_device *dev = crtc->base.dev;
> +	struct drm_i915_private *dev_priv = dev->dev_private;
> +	enum intel_display_power_domain power_domain;
> +	u32 tmp;
> +
> +	pipe_config->cpu_transcoder = (enum transcoder) crtc->pipe;
> +
> +	/*
> +	 * XXX: Do intel_display_power_get_if_enabled before reading this (for
> +	 * consistency and less surprising code; it's in always on power).
> +	 */
> +	tmp = I915_READ(TRANS_DDI_FUNC_CTL(TRANSCODER_EDP));
> +	if (tmp & TRANS_DDI_FUNC_ENABLE) {
> +		enum pipe trans_edp_pipe;
> +		switch (tmp & TRANS_DDI_EDP_INPUT_MASK) {
> +		default:
> +			WARN(1, "unknown pipe linked to edp transcoder\n");
> +		case TRANS_DDI_EDP_INPUT_A_ONOFF:
> +		case TRANS_DDI_EDP_INPUT_A_ON:
> +			trans_edp_pipe = PIPE_A;
> +			break;
> +		case TRANS_DDI_EDP_INPUT_B_ONOFF:
> +			trans_edp_pipe = PIPE_B;
> +			break;
> +		case TRANS_DDI_EDP_INPUT_C_ONOFF:
> +			trans_edp_pipe = PIPE_C;
> +			break;
> +		}
> +
> +		if (trans_edp_pipe == crtc->pipe)
> +			pipe_config->cpu_transcoder = TRANSCODER_EDP;
> +	}
> +
> +	power_domain = POWER_DOMAIN_TRANSCODER(pipe_config->cpu_transcoder);
> +	if (!intel_display_power_get_if_enabled(dev_priv, power_domain))
> +		return false;
> +	*power_domain_mask |= BIT(power_domain);
> +
> +	tmp = I915_READ(PIPECONF(pipe_config->cpu_transcoder));
> +
> +	return tmp & PIPECONF_ENABLE;
> +}
> +
>  static void haswell_get_ddi_port_state(struct intel_crtc *crtc,
>  				       struct intel_crtc_state *pipe_config)
>  {
> @@ -9960,48 +10007,18 @@ static bool haswell_get_pipe_config(struct intel_crtc *crtc,
>  	struct drm_i915_private *dev_priv = dev->dev_private;
>  	enum intel_display_power_domain power_domain;
>  	unsigned long power_domain_mask;
> -	uint32_t tmp;
> -	bool ret;
> +	bool active;
>  
>  	power_domain = POWER_DOMAIN_PIPE(crtc->pipe);
>  	if (!intel_display_power_get_if_enabled(dev_priv, power_domain))
>  		return false;
>  	power_domain_mask = BIT(power_domain);
>  
> -	ret = false;
> -
> -	pipe_config->cpu_transcoder = (enum transcoder) crtc->pipe;
>  	pipe_config->shared_dpll = NULL;
>  
> -	tmp = I915_READ(TRANS_DDI_FUNC_CTL(TRANSCODER_EDP));
> -	if (tmp & TRANS_DDI_FUNC_ENABLE) {
> -		enum pipe trans_edp_pipe;
> -		switch (tmp & TRANS_DDI_EDP_INPUT_MASK) {
> -		default:
> -			WARN(1, "unknown pipe linked to edp transcoder\n");
> -		case TRANS_DDI_EDP_INPUT_A_ONOFF:
> -		case TRANS_DDI_EDP_INPUT_A_ON:
> -			trans_edp_pipe = PIPE_A;
> -			break;
> -		case TRANS_DDI_EDP_INPUT_B_ONOFF:
> -			trans_edp_pipe = PIPE_B;
> -			break;
> -		case TRANS_DDI_EDP_INPUT_C_ONOFF:
> -			trans_edp_pipe = PIPE_C;
> -			break;
> -		}
> -
> -		if (trans_edp_pipe == crtc->pipe)
> -			pipe_config->cpu_transcoder = TRANSCODER_EDP;
> -	}
> +	active = hsw_get_transcoder_state(crtc, pipe_config, &power_domain_mask);
>  
> -	power_domain = POWER_DOMAIN_TRANSCODER(pipe_config->cpu_transcoder);
> -	if (!intel_display_power_get_if_enabled(dev_priv, power_domain))
> -		goto out;
> -	power_domain_mask |= BIT(power_domain);
> -
> -	tmp = I915_READ(PIPECONF(pipe_config->cpu_transcoder));
> -	if (!(tmp & PIPECONF_ENABLE))
> +	if (!active)
>  		goto out;
>  
>  	haswell_get_ddi_port_state(crtc, pipe_config);
> @@ -10038,13 +10055,11 @@ static bool haswell_get_pipe_config(struct intel_crtc *crtc,
>  		pipe_config->pixel_multiplier = 1;
>  	}
>  
> -	ret = true;
> -
>  out:
>  	for_each_power_domain(power_domain, power_domain_mask)
>  		intel_display_power_put(dev_priv, power_domain);
>  
> -	return ret;
> +	return active;
>  }
>  
>  static void i845_update_cursor(struct drm_crtc *crtc, u32 base,
> -- 
> 2.1.4

-- 
Ville Syrjälä
Intel OTC
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

  reply	other threads:[~2016-03-18 15:31 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-03-18 15:05 [PATCH v2 0/6] drm/i915/bxt: add dsi transcoders Jani Nikula
2016-03-18 15:05 ` [PATCH v2 1/6] drm/i915: split get/set pipe timings to timings and src size Jani Nikula
2016-03-18 15:25   ` Ville Syrjälä
2016-03-18 15:05 ` [PATCH v2 2/6] drm/i915: split set pipeconf to pipeconf, pipemisc, pipe_gamma Jani Nikula
2016-03-18 15:29   ` Ville Syrjälä
2016-03-18 15:05 ` [PATCH v2 3/6] drm/i915: abstract get config for cpu transcoder Jani Nikula
2016-03-18 15:31   ` Ville Syrjälä [this message]
2016-03-18 15:05 ` [PATCH v2 4/6] drm/i915/bxt: add dsi transcoders Jani Nikula
2016-03-18 15:38   ` Ville Syrjälä
2016-03-18 15:05 ` [PATCH v2 5/6] drm/i915/dsi: use the BIT macro for clarity Jani Nikula
2016-03-18 15:38   ` Ville Syrjälä
2016-03-18 15:05 ` [PATCH v2 6/6] drm/i915/bxt: allow dsi on any pipe Jani Nikula
2016-03-18 15:39   ` Ville Syrjälä
2016-03-21  9:59 ` ✗ Fi.CI.BAT: failure for drm/i915/bxt: add dsi transcoders (rev2) Patchwork
2016-03-21 13:04   ` Jani Nikula

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20160318153116.GJ4329@intel.com \
    --to=ville.syrjala@linux.intel.com \
    --cc=intel-gfx@lists.freedesktop.org \
    --cc=jani.nikula@intel.com \
    --cc=m.deepak@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox