From: Hans de Goede <hdegoede@redhat.com>
To: "Daniel Vetter" <daniel.vetter@intel.com>,
"Jani Nikula" <jani.nikula@linux.intel.com>,
"Ville Syrjälä" <ville.syrjala@linux.intel.com>
Cc: Hans de Goede <hdegoede@redhat.com>,
intel-gfx <intel-gfx@lists.freedesktop.org>
Subject: [PATCH resend 04/15] drm/i915/dsi: Move intel_dsi_clear_device_ready()
Date: Mon, 20 Feb 2017 15:08:34 +0100 [thread overview]
Message-ID: <20170220140845.1714-5-hdegoede@redhat.com> (raw)
In-Reply-To: <20170220140845.1714-1-hdegoede@redhat.com>
Move the intel_dsi_clear_device_ready() function to higher up in
intel_dsi.c this pairs it with intel_dsi_device_ready(); and pairs
intel_dsi_*enable* with intel_dsi_*disable without
intel_dsi_clear_device_ready() sitting in the middle of them.
This commit purely moves code around, it does not make any
changes what-so-ever.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
---
drivers/gpu/drm/i915/intel_dsi.c | 86 ++++++++++++++++++++--------------------
1 file changed, 43 insertions(+), 43 deletions(-)
diff --git a/drivers/gpu/drm/i915/intel_dsi.c b/drivers/gpu/drm/i915/intel_dsi.c
index d741280..072f99b 100644
--- a/drivers/gpu/drm/i915/intel_dsi.c
+++ b/drivers/gpu/drm/i915/intel_dsi.c
@@ -433,6 +433,49 @@ static void intel_dsi_device_ready(struct intel_encoder *encoder)
bxt_dsi_device_ready(encoder);
}
+static void intel_dsi_clear_device_ready(struct intel_encoder *encoder)
+{
+ struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
+ struct intel_dsi *intel_dsi = enc_to_intel_dsi(&encoder->base);
+ enum port port;
+
+ DRM_DEBUG_KMS("\n");
+ for_each_dsi_port(port, intel_dsi->ports) {
+ /* Common bit for both MIPI Port A & MIPI Port C on VLV/CHV */
+ i915_reg_t port_ctrl = IS_GEN9_LP(dev_priv) ?
+ BXT_MIPI_PORT_CTRL(port) : MIPI_PORT_CTRL(PORT_A);
+ u32 val;
+
+ I915_WRITE(MIPI_DEVICE_READY(port), DEVICE_READY |
+ ULPS_STATE_ENTER);
+ usleep_range(2000, 2500);
+
+ I915_WRITE(MIPI_DEVICE_READY(port), DEVICE_READY |
+ ULPS_STATE_EXIT);
+ usleep_range(2000, 2500);
+
+ I915_WRITE(MIPI_DEVICE_READY(port), DEVICE_READY |
+ ULPS_STATE_ENTER);
+ usleep_range(2000, 2500);
+
+ /* Wait till Clock lanes are in LP-00 state for MIPI Port A
+ * only. MIPI Port C has no similar bit for checking
+ */
+ if (intel_wait_for_register(dev_priv,
+ port_ctrl, AFE_LATCHOUT, 0,
+ 30))
+ DRM_ERROR("DSI LP not going Low\n");
+
+ /* Disable MIPI PHY transparent latch */
+ val = I915_READ(port_ctrl);
+ I915_WRITE(port_ctrl, val & ~LP_OUTPUT_HOLD);
+ usleep_range(1000, 1500);
+
+ I915_WRITE(MIPI_DEVICE_READY(port), 0x00);
+ usleep_range(2000, 2500);
+ }
+}
+
static void intel_dsi_port_enable(struct intel_encoder *encoder)
{
struct drm_device *dev = encoder->base.dev;
@@ -621,49 +664,6 @@ static void intel_dsi_pre_disable(struct intel_encoder *encoder,
}
}
-static void intel_dsi_clear_device_ready(struct intel_encoder *encoder)
-{
- struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
- struct intel_dsi *intel_dsi = enc_to_intel_dsi(&encoder->base);
- enum port port;
-
- DRM_DEBUG_KMS("\n");
- for_each_dsi_port(port, intel_dsi->ports) {
- /* Common bit for both MIPI Port A & MIPI Port C on VLV/CHV */
- i915_reg_t port_ctrl = IS_GEN9_LP(dev_priv) ?
- BXT_MIPI_PORT_CTRL(port) : MIPI_PORT_CTRL(PORT_A);
- u32 val;
-
- I915_WRITE(MIPI_DEVICE_READY(port), DEVICE_READY |
- ULPS_STATE_ENTER);
- usleep_range(2000, 2500);
-
- I915_WRITE(MIPI_DEVICE_READY(port), DEVICE_READY |
- ULPS_STATE_EXIT);
- usleep_range(2000, 2500);
-
- I915_WRITE(MIPI_DEVICE_READY(port), DEVICE_READY |
- ULPS_STATE_ENTER);
- usleep_range(2000, 2500);
-
- /* Wait till Clock lanes are in LP-00 state for MIPI Port A
- * only. MIPI Port C has no similar bit for checking
- */
- if (intel_wait_for_register(dev_priv,
- port_ctrl, AFE_LATCHOUT, 0,
- 30))
- DRM_ERROR("DSI LP not going Low\n");
-
- /* Disable MIPI PHY transparent latch */
- val = I915_READ(port_ctrl);
- I915_WRITE(port_ctrl, val & ~LP_OUTPUT_HOLD);
- usleep_range(1000, 1500);
-
- I915_WRITE(MIPI_DEVICE_READY(port), 0x00);
- usleep_range(2000, 2500);
- }
-}
-
static void intel_dsi_post_disable(struct intel_encoder *encoder,
struct intel_crtc_state *pipe_config,
struct drm_connector_state *conn_state)
--
2.9.3
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
next prev parent reply other threads:[~2017-02-20 14:08 UTC|newest]
Thread overview: 49+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-02-20 14:08 [PATCH resend 00/15] drm/i915/dsi: Fix / cleanup dsi enable / disable sequences Hans de Goede
2017-02-20 14:08 ` [PATCH resend 01/15] drm/i915/dsi: Move calling of wait_for_dsi_fifo_empty to mipi_exec_send_packet Hans de Goede
2017-02-24 16:59 ` Bob Paauwe
2017-02-20 14:08 ` [PATCH resend 02/15] drm/i915/dsi: Merge intel_dsi_disable/enable into their respective callers Hans de Goede
2017-02-24 16:59 ` Bob Paauwe
2017-02-20 14:08 ` [PATCH resend 03/15] drm/i915/dsi: Add intel_dsi_unprepare() helper Hans de Goede
2017-02-24 16:59 ` Bob Paauwe
2017-02-20 14:08 ` Hans de Goede [this message]
2017-02-24 17:00 ` [PATCH resend 04/15] drm/i915/dsi: Move intel_dsi_clear_device_ready() Bob Paauwe
2017-02-20 14:08 ` [PATCH resend 05/15] drm/i915/dsi: Document the panel enable / disable sequences from the spec Hans de Goede
2017-02-24 17:00 ` Bob Paauwe
2017-02-25 10:31 ` Hans de Goede
2017-02-28 9:38 ` Hans de Goede
2017-02-20 14:08 ` [PATCH resend 06/15] drm/i915/dsi: Make intel_dsi_enable/disable directly exec VBT sequences Hans de Goede
2017-02-24 17:00 ` Bob Paauwe
2017-02-20 14:08 ` [PATCH resend 07/15] drm/i915/dsi: Drop bogus MIPI_SEQ_ASSERT_RESET before POWER_ON Hans de Goede
2017-02-24 17:00 ` Bob Paauwe
2017-02-25 10:35 ` Hans de Goede
2017-02-27 16:56 ` Bob Paauwe
2017-02-20 14:08 ` [PATCH resend 08/15] drm/i915/dsi: Move MIPI_SEQ_POWER_ON/OFF calls together with pmic gpio calls Hans de Goede
2017-02-24 17:00 ` Bob Paauwe
2017-02-20 14:08 ` [PATCH resend 09/15] drm/i915/dsi: Group DPOunit clock gate workaround with PLL enable Hans de Goede
2017-02-24 17:00 ` Bob Paauwe
2017-02-20 14:08 ` [PATCH resend 10/15] drm/i915/dsi: Execute MIPI_SEQ_DEASSERT_RESET before calling device_ready() Hans de Goede
2017-02-24 17:00 ` Bob Paauwe
2017-02-20 14:08 ` [PATCH resend 11/15] drm/i915/dsi: Group MIPI_SEQ_BACKLIGHT_ON/OFF with panel_[en|dis]able_backlight Hans de Goede
2017-02-24 17:00 ` Bob Paauwe
2017-02-25 10:37 ` Hans de Goede
2017-02-27 17:06 ` Bob Paauwe
2017-02-27 17:40 ` Jani Nikula
2017-02-27 22:04 ` Hans de Goede
2017-02-20 14:08 ` [PATCH resend 12/15] drm/i915/dsi: Document always using v3 SHUTDOWN / MIPI_SEQ_DISPLAY_OFF order Hans de Goede
2017-02-24 17:02 ` Bob Paauwe
2017-02-25 10:42 ` Hans de Goede
2017-02-27 17:16 ` Bob Paauwe
2017-02-27 17:44 ` Jani Nikula
2017-02-28 9:00 ` Hans de Goede
2017-02-20 14:08 ` [PATCH resend 13/15] drm/i915/dsi: Execute MIPI_SEQ_TEAR_OFF from intel_dsi_post_disable Hans de Goede
2017-02-24 17:02 ` Bob Paauwe
2017-02-25 10:45 ` Hans de Goede
2017-02-27 17:47 ` Jani Nikula
2017-02-20 14:08 ` [PATCH resend 14/15] drm/i915/dsi: Call MIPI_SEQ_TEAR_ON and DISPLAY_ON for cmd-mode (untested) Hans de Goede
2017-02-24 17:02 ` Bob Paauwe
2017-02-25 10:47 ` Hans de Goede
2017-02-27 17:21 ` Bob Paauwe
2017-02-20 14:08 ` [PATCH resend 15/15] drm/i915/dsi: Skip delays for v3 VBTs in vid-mode Hans de Goede
2017-02-24 17:02 ` Bob Paauwe
2017-02-25 10:49 ` Hans de Goede
2017-02-27 17:23 ` Bob Paauwe
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170220140845.1714-5-hdegoede@redhat.com \
--to=hdegoede@redhat.com \
--cc=daniel.vetter@intel.com \
--cc=intel-gfx@lists.freedesktop.org \
--cc=jani.nikula@linux.intel.com \
--cc=ville.syrjala@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox