Intel-GFX Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Robert Bragg <robert@sixbynine.org>
To: intel-gfx@lists.freedesktop.org
Cc: Lionel Landwerlin <lionel.g.landwerlin@linux.intel.com>
Subject: [PATCH v2] drm/i915/perf: per-gen timebase for checking sample freq
Date: Wed,  5 Apr 2017 20:05:06 +0100	[thread overview]
Message-ID: <20170405190506.2227-1-robert@sixbynine.org> (raw)
In-Reply-To: <20170405162320.30094-7-robert@sixbynine.org>

An oa_exponent_to_ns() utility and per-gen timebase constants where
recently removed when updating the tail pointer race condition WA, and
this restores those so we can update the _PROP_OA_EXPONENT validation
done in read_properties_unlocked() to not assume we have a 12.5MHz
timebase as we did for Haswell.

Accordingly the oa_sample_rate_hard_limit value that's referenced by
proc_dointvec_minmax defining the absolute limit for the OA sampling
frequency is now initialized to (timestamp_frequency / 2) instead of the
6.25MHz constant for Haswell.

v2:
    Specify frequency of 19.2MHz for BXT (Ville)
    Initialize oa_sample_rate_hard_limit per-gen too (Lionel)

Signed-off-by: Robert Bragg <robert@sixbynine.org>
Cc: Lionel Landwerlin <lionel.g.landwerlin@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
---
 drivers/gpu/drm/i915/i915_drv.h  |  1 +
 drivers/gpu/drm/i915/i915_perf.c | 31 ++++++++++++++++++++++---------
 2 files changed, 23 insertions(+), 9 deletions(-)

diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index 3a22b6fd0ee6..48b07d706f06 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -2463,6 +2463,7 @@ struct drm_i915_private {
 
 			bool periodic;
 			int period_exponent;
+			int timestamp_frequency;
 
 			int metrics_set;
 
diff --git a/drivers/gpu/drm/i915/i915_perf.c b/drivers/gpu/drm/i915/i915_perf.c
index 98eb6415b63a..980b4a1fd7cc 100644
--- a/drivers/gpu/drm/i915/i915_perf.c
+++ b/drivers/gpu/drm/i915/i915_perf.c
@@ -288,10 +288,12 @@ static u32 i915_perf_stream_paranoid = true;
 
 /* For sysctl proc_dointvec_minmax of i915_oa_max_sample_rate
  *
- * 160ns is the smallest sampling period we can theoretically program the OA
- * unit with on Haswell, corresponding to 6.25MHz.
+ * The highest sampling frequency we can theoretically program the OA unit
+ * with is always half the timestamp frequency: E.g. 6.25Mhz for Haswell.
+ *
+ * Initialized just before we register the sysctl parameter.
  */
-static int oa_sample_rate_hard_limit = 6250000;
+static int oa_sample_rate_hard_limit;
 
 /* Theoretically we can program the OA unit to sample every 160ns but don't
  * allow that by default unless root...
@@ -2549,6 +2551,12 @@ i915_perf_open_ioctl_locked(struct drm_i915_private *dev_priv,
 	return ret;
 }
 
+static u64 oa_exponent_to_ns(struct drm_i915_private *dev_priv, int exponent)
+{
+       return div_u64(1000000000ULL * (2ULL << exponent),
+                      dev_priv->perf.oa.timestamp_frequency);
+}
+
 /**
  * read_properties_unlocked - validate + copy userspace stream open properties
  * @dev_priv: i915 device instance
@@ -2647,14 +2655,9 @@ static int read_properties_unlocked(struct drm_i915_private *dev_priv,
 			/* Theoretically we can program the OA unit to sample
 			 * every 160ns but don't allow that by default unless
 			 * root.
-			 *
-			 * On Haswell the period is derived from the exponent
-			 * as:
-			 *
-			 *   period = 80ns * 2^(exponent + 1)
 			 */
 			BUILD_BUG_ON(sizeof(oa_period) != 8);
-			oa_period = 80ull * (2ull << value);
+			oa_period = oa_exponent_to_ns(dev_priv, value);
 
 			/* This check is primarily to ensure that oa_period <=
 			 * UINT32_MAX (before passing to do_div which only
@@ -2910,6 +2913,8 @@ void i915_perf_init(struct drm_i915_private *dev_priv)
 		dev_priv->perf.oa.ops.oa_hw_tail_read =
 			gen7_oa_hw_tail_read;
 
+		dev_priv->perf.oa.timestamp_frequency = 12500000;
+
 		dev_priv->perf.oa.oa_formats = hsw_oa_formats;
 
 		dev_priv->perf.oa.n_builtin_sets =
@@ -2923,6 +2928,8 @@ void i915_perf_init(struct drm_i915_private *dev_priv)
 		 */
 
 		if (IS_GEN8(dev_priv)) {
+			dev_priv->perf.oa.timestamp_frequency = 12500000;
+
 			dev_priv->perf.oa.ctx_oactxctrl_offset = 0x120;
 			dev_priv->perf.oa.ctx_flexeu0_offset = 0x2ce;
 			dev_priv->perf.oa.gen8_valid_ctx_bit = (1<<25);
@@ -2939,6 +2946,8 @@ void i915_perf_init(struct drm_i915_private *dev_priv)
 					i915_oa_select_metric_set_chv;
 			}
 		} else if (IS_GEN9(dev_priv)) {
+			dev_priv->perf.oa.timestamp_frequency = 12000000;
+
 			dev_priv->perf.oa.ctx_oactxctrl_offset = 0x128;
 			dev_priv->perf.oa.ctx_flexeu0_offset = 0x3de;
 			dev_priv->perf.oa.gen8_valid_ctx_bit = (1<<16);
@@ -2959,6 +2968,8 @@ void i915_perf_init(struct drm_i915_private *dev_priv)
 				dev_priv->perf.oa.ops.select_metric_set =
 					i915_oa_select_metric_set_sklgt4;
 			} else if (IS_BROXTON(dev_priv)) {
+				dev_priv->perf.oa.timestamp_frequency = 19200000;
+
 				dev_priv->perf.oa.n_builtin_sets =
 					i915_oa_n_builtin_metric_sets_bxt;
 				dev_priv->perf.oa.ops.select_metric_set =
@@ -2993,6 +3004,8 @@ void i915_perf_init(struct drm_i915_private *dev_priv)
 		spin_lock_init(&dev_priv->perf.hook_lock);
 		spin_lock_init(&dev_priv->perf.oa.oa_buffer.ptr_lock);
 
+		oa_sample_rate_hard_limit =
+			dev_priv->perf.oa.timestamp_frequency / 2;
 		dev_priv->perf.sysctl_header = register_sysctl_table(dev_root);
 
 		dev_priv->perf.initialized = true;
-- 
2.12.0

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

  parent reply	other threads:[~2017-04-05 19:05 UTC|newest]

Thread overview: 22+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-04-05 16:23 [PATCH v3 0/7] Enable OA unit for Gen 8 and 9 in i915 perf Robert Bragg
2017-04-05 16:23 ` [PATCH v3 1/7] drm/i915: expose _SLICE_MASK GETPARM Robert Bragg
2017-04-05 16:23 ` [PATCH v3 2/7] drm/i915: expose _SUBSLICE_MASK GETPARM Robert Bragg
2017-04-05 16:23 ` [PATCH v3 3/7] drm/i915/perf: Add 'render basic' Gen8+ OA unit configs Robert Bragg
2017-04-05 16:23 ` [PATCH v3 4/7] drm/i915/perf: Add OA unit support for Gen 8+ Robert Bragg
2017-04-06 16:56   ` Lionel Landwerlin
2017-04-12 11:33   ` Matthew Auld
2017-04-12 14:57     ` Robert Bragg
2017-04-05 16:23 ` [PATCH v3 5/7] drm/i915/perf: Add more OA configs for BDW, CHV, SKL + BXT Robert Bragg
2017-04-05 16:23 ` [PATCH v3 6/7] drm/i915/perf: per-gen timebase for checking sample freq Robert Bragg
2017-04-05 16:49   ` Lionel Landwerlin
2017-04-05 17:06   ` Ville Syrjälä
2017-04-05 17:17     ` Lionel Landwerlin
2017-04-05 17:26       ` Ville Syrjälä
2017-04-05 17:59         ` Robert Bragg
2017-04-05 19:05   ` Robert Bragg [this message]
2017-04-12 12:34     ` [PATCH v2] " Matthew Auld
2017-04-12 15:07       ` Robert Bragg
2017-04-05 16:23 ` [PATCH v3 7/7] drm/i915/perf: remove perf.hook_lock Robert Bragg
2017-04-12 11:36   ` Matthew Auld
2017-04-05 16:42 ` ✓ Fi.CI.BAT: success for Enable OA unit for Gen 8 and 9 in i915 perf (rev4) Patchwork
2017-04-05 19:21 ` ✓ Fi.CI.BAT: success for Enable OA unit for Gen 8 and 9 in i915 perf (rev5) Patchwork

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20170405190506.2227-1-robert@sixbynine.org \
    --to=robert@sixbynine.org \
    --cc=intel-gfx@lists.freedesktop.org \
    --cc=lionel.g.landwerlin@linux.intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox