From: "Ville Syrjälä" <ville.syrjala@linux.intel.com>
To: Imre Deak <imre.deak@intel.com>
Cc: Vandita Kulkarni <vandita.kulkarni@intel.com>,
intel-gfx@lists.freedesktop.org,
Paulo Zanoni <paulo.r.zanoni@intel.com>
Subject: Re: [PATCH v2 2/5] drm/i915/ddi: Push pipe clock enabling to encoders
Date: Wed, 13 Jun 2018 20:46:21 +0300 [thread overview]
Message-ID: <20180613174621.GN23723@intel.com> (raw)
In-Reply-To: <20180613172746.18525-1-imre.deak@intel.com>
On Wed, Jun 13, 2018 at 08:27:46PM +0300, Imre Deak wrote:
> On ICL the pipe clock needs to be enabled before setting the HDMI
> infoframe, but these steps are in the reverse order atm. Move the pipe
> clock enabling to the encoders, so reordering of the two steps can be
> done in a clean way.
>
> No functional change.
>
> v2:
> - Rebased on drm-tip.
>
> Cc: Vandita Kulkarni <vandita.kulkarni@intel.com>
> Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
> Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
> ---
> drivers/gpu/drm/i915/intel_crt.c | 4 ++++
> drivers/gpu/drm/i915/intel_ddi.c | 8 ++++++++
> drivers/gpu/drm/i915/intel_display.c | 6 ------
> 3 files changed, 12 insertions(+), 6 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/intel_crt.c b/drivers/gpu/drm/i915/intel_crt.c
> index 211d601cd1b1..8daf170302a0 100644
> --- a/drivers/gpu/drm/i915/intel_crt.c
> +++ b/drivers/gpu/drm/i915/intel_crt.c
> @@ -232,6 +232,8 @@ static void hsw_post_disable_crt(struct intel_encoder *encoder,
> {
> struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
>
> + intel_ddi_disable_pipe_clock(old_crtc_state);
> +
> pch_post_disable_crt(encoder, old_crtc_state, old_conn_state);
>
> lpt_disable_pch_transcoder(dev_priv);
> @@ -268,6 +270,8 @@ static void hsw_pre_enable_crt(struct intel_encoder *encoder,
> intel_set_cpu_fifo_underrun_reporting(dev_priv, pipe, false);
>
> dev_priv->display.fdi_link_train(crtc, crtc_state);
> +
> + intel_ddi_enable_pipe_clock(crtc_state);
> }
>
> static void hsw_enable_crt(struct intel_encoder *encoder,
> diff --git a/drivers/gpu/drm/i915/intel_ddi.c b/drivers/gpu/drm/i915/intel_ddi.c
> index ca73387bd596..df0e64a9721a 100644
> --- a/drivers/gpu/drm/i915/intel_ddi.c
> +++ b/drivers/gpu/drm/i915/intel_ddi.c
> @@ -2639,6 +2639,8 @@ static void intel_ddi_pre_enable_dp(struct intel_encoder *encoder,
> intel_dp_start_link_train(intel_dp);
> if (port != PORT_A || INTEL_GEN(dev_priv) >= 9)
> intel_dp_stop_link_train(intel_dp);
> +
> + intel_ddi_enable_pipe_clock(crtc_state);
> }
>
> static void intel_ddi_pre_enable_hdmi(struct intel_encoder *encoder,
> @@ -2672,6 +2674,8 @@ static void intel_ddi_pre_enable_hdmi(struct intel_encoder *encoder,
> intel_dig_port->set_infoframes(&encoder->base,
> crtc_state->has_infoframe,
> crtc_state, conn_state);
> +
> + intel_ddi_enable_pipe_clock(crtc_state);
> }
>
> static void intel_ddi_pre_enable(struct intel_encoder *encoder,
> @@ -2738,6 +2742,8 @@ static void intel_ddi_post_disable_dp(struct intel_encoder *encoder,
> bool is_mst = intel_crtc_has_type(old_crtc_state,
> INTEL_OUTPUT_DP_MST);
>
> + intel_ddi_disable_pipe_clock(old_crtc_state);
> +
> /*
> * Power down sink before disabling the port, otherwise we end
> * up getting interrupts from the sink on detecting link loss.
> @@ -2763,6 +2769,8 @@ static void intel_ddi_post_disable_hdmi(struct intel_encoder *encoder,
> struct intel_digital_port *dig_port = enc_to_dig_port(&encoder->base);
> struct intel_hdmi *intel_hdmi = &dig_port->hdmi;
>
> + intel_ddi_disable_pipe_clock(old_crtc_state);
> +
> intel_disable_ddi_buf(encoder);
>
> dig_port->set_infoframes(&encoder->base, false,
> diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
> index f8bbfc7ce7ce..cd10e83ec456 100644
> --- a/drivers/gpu/drm/i915/intel_display.c
> +++ b/drivers/gpu/drm/i915/intel_display.c
> @@ -5646,9 +5646,6 @@ static void haswell_crtc_enable(struct intel_crtc_state *pipe_config,
>
> intel_encoders_pre_enable(crtc, pipe_config, old_state);
>
> - if (!transcoder_is_dsi(cpu_transcoder))
> - intel_ddi_enable_pipe_clock(pipe_config);
> -
> if (intel_crtc_has_dp_encoder(intel_crtc->config))
> intel_dp_set_m_n(intel_crtc, M1_N1);
>
> @@ -5835,9 +5832,6 @@ static void haswell_crtc_disable(struct intel_crtc_state *old_crtc_state,
> else
> ironlake_pfit_disable(intel_crtc, false);
>
> - if (!transcoder_is_dsi(cpu_transcoder))
> - intel_ddi_disable_pipe_clock(old_crtc_state);
> -
> intel_encoders_post_disable(crtc, old_crtc_state, old_state);
>
> if (INTEL_GEN(dev_priv) >= 11)
> --
> 2.13.2
--
Ville Syrjälä
Intel
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
next prev parent reply other threads:[~2018-06-13 17:46 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-06-13 17:07 [PATCH 0/5] drm/i915/icl: Fix HDMI infoframe setting Imre Deak
2018-06-13 17:07 ` [PATCH 1/5] drm/i915/ddi: s/crtc->config/old_crtc_state in haswell_crtc_disable() Imre Deak
2018-06-13 17:43 ` Ville Syrjälä
2018-06-13 17:07 ` [PATCH 2/5] drm/i915/ddi: Push pipe clock enabling to encoders Imre Deak
2018-06-13 17:27 ` [PATCH v2 " Imre Deak
2018-06-13 17:46 ` Ville Syrjälä [this message]
2018-06-13 17:07 ` [PATCH 3/5] drm/i915/ddi: Check transcoder instead of port when setting HDMI infoframe Imre Deak
2018-06-13 17:47 ` Ville Syrjälä
2018-06-13 17:07 ` [PATCH 4/5] drm/i915/ddi: Set HDMI infoframes with pipe clocks enabled Imre Deak
2018-06-13 17:49 ` Ville Syrjälä
2018-06-13 17:07 ` [PATCH 5/5] drm/i915/ddi: Removed unused var from hsw_write_infoframe() Imre Deak
2018-06-13 17:51 ` Ville Syrjälä
2018-06-13 17:13 ` ✗ Fi.CI.BAT: failure for drm/i915/icl: Fix HDMI infoframe setting Patchwork
2018-06-13 18:02 ` ✓ Fi.CI.BAT: success for drm/i915/icl: Fix HDMI infoframe setting (rev2) Patchwork
2018-06-13 22:03 ` ✓ Fi.CI.IGT: " Patchwork
2018-06-14 17:32 ` Imre Deak
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180613174621.GN23723@intel.com \
--to=ville.syrjala@linux.intel.com \
--cc=imre.deak@intel.com \
--cc=intel-gfx@lists.freedesktop.org \
--cc=paulo.r.zanoni@intel.com \
--cc=vandita.kulkarni@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox