From: "Ville Syrjälä" <ville.syrjala@linux.intel.com>
To: Imre Deak <imre.deak@intel.com>
Cc: Vandita Kulkarni <vandita.kulkarni@intel.com>,
intel-gfx@lists.freedesktop.org,
Paulo Zanoni <paulo.r.zanoni@intel.com>
Subject: Re: [PATCH 3/5] drm/i915/ddi: Check transcoder instead of port when setting HDMI infoframe
Date: Wed, 13 Jun 2018 20:47:28 +0300 [thread overview]
Message-ID: <20180613174728.GO23723@intel.com> (raw)
In-Reply-To: <20180613170710.15080-4-imre.deak@intel.com>
On Wed, Jun 13, 2018 at 08:07:08PM +0300, Imre Deak wrote:
> The only requirement by BSpec for setting the HDMI infoframes is on DDI
> platforms to do that before enabling the HDMI transcoder function, see
> VIDEO_DIP_CTL bit 16. Accordingly check for the transcoder function
> disabled state instead of the port's disabled state on DDI platforms.
> This is needed by the next patch as it will set the infoframe during
> crtc disabling where the port is still enabled.
>
> Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
> Cc: Vandita Kulkarni <vandita.kulkarni@intel.com>
> Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
> Signed-off-by: Imre Deak <imre.deak@intel.com>
Seems sensible.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
> ---
> drivers/gpu/drm/i915/intel_hdmi.c | 13 +++++++++++--
> 1 file changed, 11 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/intel_hdmi.c b/drivers/gpu/drm/i915/intel_hdmi.c
> index b7a95fd0663b..29d586f5cedb 100644
> --- a/drivers/gpu/drm/i915/intel_hdmi.c
> +++ b/drivers/gpu/drm/i915/intel_hdmi.c
> @@ -59,6 +59,15 @@ assert_hdmi_port_disabled(struct intel_hdmi *intel_hdmi)
> "HDMI port enabled, expecting disabled\n");
> }
>
> +static void
> +assert_hdmi_transcoder_func_disabled(struct drm_i915_private *dev_priv,
> + enum transcoder cpu_transcoder)
> +{
> + WARN(I915_READ(TRANS_DDI_FUNC_CTL(cpu_transcoder)) &
> + TRANS_DDI_FUNC_ENABLE,
> + "HDMI transcoder function enabled, expecting disabled\n");
> +}
> +
> struct intel_hdmi *enc_to_intel_hdmi(struct drm_encoder *encoder)
> {
> struct intel_digital_port *intel_dig_port =
> @@ -838,11 +847,11 @@ static void hsw_set_infoframes(struct drm_encoder *encoder,
> const struct drm_connector_state *conn_state)
> {
> struct drm_i915_private *dev_priv = to_i915(encoder->dev);
> - struct intel_hdmi *intel_hdmi = enc_to_intel_hdmi(encoder);
> i915_reg_t reg = HSW_TVIDEO_DIP_CTL(crtc_state->cpu_transcoder);
> u32 val = I915_READ(reg);
>
> - assert_hdmi_port_disabled(intel_hdmi);
> + assert_hdmi_transcoder_func_disabled(dev_priv,
> + crtc_state->cpu_transcoder);
>
> val &= ~(VIDEO_DIP_ENABLE_VSC_HSW | VIDEO_DIP_ENABLE_AVI_HSW |
> VIDEO_DIP_ENABLE_GCP_HSW | VIDEO_DIP_ENABLE_VS_HSW |
> --
> 2.13.2
--
Ville Syrjälä
Intel
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
next prev parent reply other threads:[~2018-06-13 17:47 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-06-13 17:07 [PATCH 0/5] drm/i915/icl: Fix HDMI infoframe setting Imre Deak
2018-06-13 17:07 ` [PATCH 1/5] drm/i915/ddi: s/crtc->config/old_crtc_state in haswell_crtc_disable() Imre Deak
2018-06-13 17:43 ` Ville Syrjälä
2018-06-13 17:07 ` [PATCH 2/5] drm/i915/ddi: Push pipe clock enabling to encoders Imre Deak
2018-06-13 17:27 ` [PATCH v2 " Imre Deak
2018-06-13 17:46 ` Ville Syrjälä
2018-06-13 17:07 ` [PATCH 3/5] drm/i915/ddi: Check transcoder instead of port when setting HDMI infoframe Imre Deak
2018-06-13 17:47 ` Ville Syrjälä [this message]
2018-06-13 17:07 ` [PATCH 4/5] drm/i915/ddi: Set HDMI infoframes with pipe clocks enabled Imre Deak
2018-06-13 17:49 ` Ville Syrjälä
2018-06-13 17:07 ` [PATCH 5/5] drm/i915/ddi: Removed unused var from hsw_write_infoframe() Imre Deak
2018-06-13 17:51 ` Ville Syrjälä
2018-06-13 17:13 ` ✗ Fi.CI.BAT: failure for drm/i915/icl: Fix HDMI infoframe setting Patchwork
2018-06-13 18:02 ` ✓ Fi.CI.BAT: success for drm/i915/icl: Fix HDMI infoframe setting (rev2) Patchwork
2018-06-13 22:03 ` ✓ Fi.CI.IGT: " Patchwork
2018-06-14 17:32 ` Imre Deak
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180613174728.GO23723@intel.com \
--to=ville.syrjala@linux.intel.com \
--cc=imre.deak@intel.com \
--cc=intel-gfx@lists.freedesktop.org \
--cc=paulo.r.zanoni@intel.com \
--cc=vandita.kulkarni@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox