Intel-GFX Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Imre Deak <imre.deak@intel.com>
To: intel-gfx@lists.freedesktop.org
Cc: Vandita Kulkarni <vandita.kulkarni@intel.com>,
	Paulo Zanoni <paulo.r.zanoni@intel.com>
Subject: [PATCH v2 2/2] drm/i915/icl: Do read-modify-write as needed during MG PLL programming
Date: Tue, 19 Jun 2018 18:44:55 +0300	[thread overview]
Message-ID: <20180619154455.302-1-imre.deak@intel.com> (raw)
In-Reply-To: <20180615143911.31082-2-imre.deak@intel.com>

Some MG PLL registers have fields that need to be preserved at their HW
default or BIOS programmed values. So make sure we preserve them.

v2:
- Add comment to icl_mg_pll_write() explaining the need for register
  masks. (Vandita)
- Fix patchwork checkpatch warning.

Cc: Vandita Kulkarni <vandita.kulkarni@intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: James Ausmus <james.ausmus@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: James Ausmus <james.ausmus@intel.com> (v1)
---
 drivers/gpu/drm/i915/i915_reg.h       | 13 ++++++++++++
 drivers/gpu/drm/i915/intel_dpll_mgr.c | 39 +++++++++++++++++++++++++++++++----
 2 files changed, 48 insertions(+), 4 deletions(-)

diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index c6c9e4f9a718..6e587d49b936 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -9405,6 +9405,7 @@ enum skl_power_gate {
 #define _MG_REFCLKIN_CTL_PORT3				0x16A92C
 #define _MG_REFCLKIN_CTL_PORT4				0x16B92C
 #define   MG_REFCLKIN_CTL_OD_2_MUX(x)			((x) << 8)
+#define   MG_REFCLKIN_CTL_OD_2_MUX_MASK			(0x7 << 8)
 #define MG_REFCLKIN_CTL(port) _MMIO_PORT((port) - PORT_C, \
 					 _MG_REFCLKIN_CTL_PORT1, \
 					 _MG_REFCLKIN_CTL_PORT2)
@@ -9414,7 +9415,9 @@ enum skl_power_gate {
 #define _MG_CLKTOP2_CORECLKCTL1_PORT3			0x16A8D8
 #define _MG_CLKTOP2_CORECLKCTL1_PORT4			0x16B8D8
 #define   MG_CLKTOP2_CORECLKCTL1_B_DIVRATIO(x)		((x) << 16)
+#define   MG_CLKTOP2_CORECLKCTL1_B_DIVRATIO_MASK	(0xff << 16)
 #define   MG_CLKTOP2_CORECLKCTL1_A_DIVRATIO(x)		((x) << 8)
+#define   MG_CLKTOP2_CORECLKCTL1_A_DIVRATIO_MASK	(0xff << 8)
 #define MG_CLKTOP2_CORECLKCTL1(port) _MMIO_PORT((port) - PORT_C, \
 						_MG_CLKTOP2_CORECLKCTL1_PORT1, \
 						_MG_CLKTOP2_CORECLKCTL1_PORT2)
@@ -9424,9 +9427,13 @@ enum skl_power_gate {
 #define _MG_CLKTOP2_HSCLKCTL_PORT3			0x16A8D4
 #define _MG_CLKTOP2_HSCLKCTL_PORT4			0x16B8D4
 #define   MG_CLKTOP2_HSCLKCTL_CORE_INPUTSEL(x)		((x) << 16)
+#define   MG_CLKTOP2_HSCLKCTL_CORE_INPUTSEL_MASK	(0x1 << 16)
 #define   MG_CLKTOP2_HSCLKCTL_TLINEDRV_CLKSEL(x)	((x) << 14)
+#define   MG_CLKTOP2_HSCLKCTL_TLINEDRV_CLKSEL_MASK	(0x3 << 14)
 #define   MG_CLKTOP2_HSCLKCTL_HSDIV_RATIO(x)		((x) << 12)
+#define   MG_CLKTOP2_HSCLKCTL_HSDIV_RATIO_MASK		(0x3 << 12)
 #define   MG_CLKTOP2_HSCLKCTL_DSDIV_RATIO(x)		((x) << 8)
+#define   MG_CLKTOP2_HSCLKCTL_DSDIV_RATIO_MASK		(0xf << 8)
 #define MG_CLKTOP2_HSCLKCTL(port) _MMIO_PORT((port) - PORT_C, \
 					     _MG_CLKTOP2_HSCLKCTL_PORT1, \
 					     _MG_CLKTOP2_HSCLKCTL_PORT2)
@@ -9500,12 +9507,18 @@ enum skl_power_gate {
 #define _MG_PLL_BIAS_PORT3				0x16AA14
 #define _MG_PLL_BIAS_PORT4				0x16BA14
 #define   MG_PLL_BIAS_BIAS_GB_SEL(x)			((x) << 30)
+#define   MG_PLL_BIAS_BIAS_GB_SEL_MASK			(0x3 << 30)
 #define   MG_PLL_BIAS_INIT_DCOAMP(x)			((x) << 24)
+#define   MG_PLL_BIAS_INIT_DCOAMP_MASK			(0x3f << 24)
 #define   MG_PLL_BIAS_BIAS_BONUS(x)			((x) << 16)
+#define   MG_PLL_BIAS_BIAS_BONUS_MASK			(0xff << 16)
 #define   MG_PLL_BIAS_BIASCAL_EN			(1 << 15)
 #define   MG_PLL_BIAS_CTRIM(x)				((x) << 8)
+#define   MG_PLL_BIAS_CTRIM_MASK			(0x1f << 8)
 #define   MG_PLL_BIAS_VREF_RDAC(x)			((x) << 5)
+#define   MG_PLL_BIAS_VREF_RDAC_MASK			(0x7 << 5)
 #define   MG_PLL_BIAS_IREFTRIM(x)			((x) << 0)
+#define   MG_PLL_BIAS_IREFTRIM_MASK			(0x1f << 0)
 #define MG_PLL_BIAS(port) _MMIO_PORT((port) - PORT_C, _MG_PLL_BIAS_PORT1, \
 				     _MG_PLL_BIAS_PORT2)
 
diff --git a/drivers/gpu/drm/i915/intel_dpll_mgr.c b/drivers/gpu/drm/i915/intel_dpll_mgr.c
index 8543a1015e21..ae47cdb80d54 100644
--- a/drivers/gpu/drm/i915/intel_dpll_mgr.c
+++ b/drivers/gpu/drm/i915/intel_dpll_mgr.c
@@ -2992,10 +2992,21 @@ static bool icl_pll_get_hw_state(struct drm_i915_private *dev_priv,
 	} else {
 		port = icl_mg_pll_id_to_port(dev_priv, id);
 		hw_state->mg_refclkin_ctl = I915_READ(MG_REFCLKIN_CTL(port));
+		hw_state->mg_refclkin_ctl &= MG_REFCLKIN_CTL_OD_2_MUX_MASK;
+
 		hw_state->mg_clktop2_coreclkctl1 =
 			I915_READ(MG_CLKTOP2_CORECLKCTL1(port));
+		hw_state->mg_clktop2_coreclkctl1 &=
+			MG_CLKTOP2_CORECLKCTL1_A_DIVRATIO_MASK;
+
 		hw_state->mg_clktop2_hsclkctl =
 			I915_READ(MG_CLKTOP2_HSCLKCTL(port));
+		hw_state->mg_clktop2_hsclkctl &=
+			MG_CLKTOP2_HSCLKCTL_TLINEDRV_CLKSEL_MASK |
+			MG_CLKTOP2_HSCLKCTL_CORE_INPUTSEL_MASK |
+			MG_CLKTOP2_HSCLKCTL_HSDIV_RATIO_MASK |
+			MG_CLKTOP2_HSCLKCTL_DSDIV_RATIO_MASK;
+
 		hw_state->mg_pll_div0 = I915_READ(MG_PLL_DIV0(port));
 		hw_state->mg_pll_div1 = I915_READ(MG_PLL_DIV1(port));
 		hw_state->mg_pll_lf = I915_READ(MG_PLL_LF(port));
@@ -3051,10 +3062,30 @@ static void icl_mg_pll_write(struct drm_i915_private *dev_priv,
 	enum port port = icl_mg_pll_id_to_port(dev_priv, pll->info->id);
 	u32 val;
 
-	I915_WRITE(MG_REFCLKIN_CTL(port), hw_state->mg_refclkin_ctl);
-	I915_WRITE(MG_CLKTOP2_CORECLKCTL1(port),
-		   hw_state->mg_clktop2_coreclkctl1);
-	I915_WRITE(MG_CLKTOP2_HSCLKCTL(port), hw_state->mg_clktop2_hsclkctl);
+	/*
+	 * Some of the following registers have reserved fields, so program
+	 * these with RMW based on a mask. The mask can be fixed or generated
+	 * during the calc/readout phase if the mask depends on some other HW
+	 * state like refclk, see icl_calc_mg_pll_state().
+	 */
+	val = I915_READ(MG_REFCLKIN_CTL(port));
+	val &= ~MG_REFCLKIN_CTL_OD_2_MUX_MASK;
+	val |= hw_state->mg_refclkin_ctl;
+	I915_WRITE(MG_REFCLKIN_CTL(port), val);
+
+	val = I915_READ(MG_CLKTOP2_CORECLKCTL1(port));
+	val &= ~MG_CLKTOP2_CORECLKCTL1_A_DIVRATIO_MASK;
+	val |= hw_state->mg_clktop2_coreclkctl1;
+	I915_WRITE(MG_CLKTOP2_CORECLKCTL1(port), val);
+
+	val = I915_READ(MG_CLKTOP2_HSCLKCTL(port));
+	val &= ~(MG_CLKTOP2_HSCLKCTL_TLINEDRV_CLKSEL_MASK |
+		 MG_CLKTOP2_HSCLKCTL_CORE_INPUTSEL_MASK |
+		 MG_CLKTOP2_HSCLKCTL_HSDIV_RATIO_MASK |
+		 MG_CLKTOP2_HSCLKCTL_DSDIV_RATIO_MASK);
+	val |= hw_state->mg_clktop2_hsclkctl;
+	I915_WRITE(MG_CLKTOP2_HSCLKCTL(port), val);
+
 	I915_WRITE(MG_PLL_DIV0(port), hw_state->mg_pll_div0);
 	I915_WRITE(MG_PLL_DIV1(port), hw_state->mg_pll_div1);
 	I915_WRITE(MG_PLL_LF(port), hw_state->mg_pll_lf);
-- 
2.13.2

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

  reply	other threads:[~2018-06-19 15:45 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-06-15 14:39 [PATCH 1/2] drm/i915/icl: Fix MG PLL setup when refclk is 38.4MHz Imre Deak
2018-06-15 14:39 ` [PATCH 2/2] drm/i915/icl: Do read-modify-write as needed during MG PLL programming Imre Deak
2018-06-19 15:44   ` Imre Deak [this message]
2018-06-19 16:41     ` [PATCH v3 " Imre Deak
2018-06-20 13:31       ` Kulkarni, Vandita
2018-06-15 14:55 ` ✗ Fi.CI.CHECKPATCH: warning for series starting with [1/2] drm/i915/icl: Fix MG PLL setup when refclk is 38.4MHz Patchwork
2018-06-15 15:11 ` ✓ Fi.CI.BAT: success " Patchwork
2018-06-16  0:16 ` ✗ Fi.CI.IGT: failure " Patchwork
2018-06-18  8:11 ` [PATCH 1/2] " Kulkarni, Vandita
2018-06-18  9:15   ` Imre Deak
2018-06-19  6:07     ` Kulkarni, Vandita
2018-06-19 10:13       ` Imre Deak
2018-06-19 12:43         ` Kulkarni, Vandita
2018-06-19 15:47 ` ✗ Fi.CI.BAT: failure for series starting with [1/2] drm/i915/icl: Fix MG PLL setup when refclk is 38.4MHz (rev2) Patchwork
2018-06-19 17:13 ` ✗ Fi.CI.BAT: failure for series starting with [1/2] drm/i915/icl: Fix MG PLL setup when refclk is 38.4MHz (rev3) Patchwork
2018-06-21 16:12   ` Imre Deak

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180619154455.302-1-imre.deak@intel.com \
    --to=imre.deak@intel.com \
    --cc=intel-gfx@lists.freedesktop.org \
    --cc=paulo.r.zanoni@intel.com \
    --cc=vandita.kulkarni@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox