From: Imre Deak <imre.deak@intel.com>
To: intel-gfx@lists.freedesktop.org
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>, dmummenschanz@web.de
Subject: [PATCH] drm/i915/dp_mst: Fix enabling pipe clock for all streams
Date: Fri, 31 Aug 2018 20:47:39 +0300 [thread overview]
Message-ID: <20180831174739.30387-1-imre.deak@intel.com> (raw)
commit afb2c4437dae ("drm/i915/ddi: Push pipe clock enabling to encoders")
inadvertently stopped enabling the pipe clock for any DP-MST stream
after the first one. It also rearranged the pipe clock enabling wrt.
initial MST payload allocation step (which may or may not be a
problem, but it's contrary to the spec.).
Fix things by making the above commit truly a non-functional change.
Fixes: commit afb2c4437dae ("drm/i915/ddi: Push pipe clock enabling to encoders")
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107365
Reported-by: Lyude Paul <lyude@redhat.com>
Reported-by: dmummenschanz@web.de
Tested-by: dmummenschanz@web.de
Cc: Lyude Paul <lyude@redhat.com>
Cc: dmummenschanz@web.de
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Imre Deak <imre.deak@intel.com>
---
drivers/gpu/drm/i915/intel_ddi.c | 17 +++++++++--------
drivers/gpu/drm/i915/intel_dp_mst.c | 4 ++++
2 files changed, 13 insertions(+), 8 deletions(-)
diff --git a/drivers/gpu/drm/i915/intel_ddi.c b/drivers/gpu/drm/i915/intel_ddi.c
index f3b115ce4029..dcb1a98d624d 100644
--- a/drivers/gpu/drm/i915/intel_ddi.c
+++ b/drivers/gpu/drm/i915/intel_ddi.c
@@ -2912,7 +2912,8 @@ static void intel_ddi_pre_enable_dp(struct intel_encoder *encoder,
icl_enable_phy_clock_gating(dig_port);
- intel_ddi_enable_pipe_clock(crtc_state);
+ if (!is_mst)
+ intel_ddi_enable_pipe_clock(crtc_state);
}
static void intel_ddi_pre_enable_hdmi(struct intel_encoder *encoder,
@@ -3015,14 +3016,14 @@ static void intel_ddi_post_disable_dp(struct intel_encoder *encoder,
bool is_mst = intel_crtc_has_type(old_crtc_state,
INTEL_OUTPUT_DP_MST);
- intel_ddi_disable_pipe_clock(old_crtc_state);
-
- /*
- * Power down sink before disabling the port, otherwise we end
- * up getting interrupts from the sink on detecting link loss.
- */
- if (!is_mst)
+ if (!is_mst) {
+ intel_ddi_disable_pipe_clock(old_crtc_state);
+ /*
+ * Power down sink before disabling the port, otherwise we end
+ * up getting interrupts from the sink on detecting link loss.
+ */
intel_dp_sink_dpms(intel_dp, DRM_MODE_DPMS_OFF);
+ }
intel_disable_ddi_buf(encoder);
diff --git a/drivers/gpu/drm/i915/intel_dp_mst.c b/drivers/gpu/drm/i915/intel_dp_mst.c
index 352e5216cc65..77920f1a3da1 100644
--- a/drivers/gpu/drm/i915/intel_dp_mst.c
+++ b/drivers/gpu/drm/i915/intel_dp_mst.c
@@ -166,6 +166,8 @@ static void intel_mst_post_disable_dp(struct intel_encoder *encoder,
struct intel_connector *connector =
to_intel_connector(old_conn_state->connector);
+ intel_ddi_disable_pipe_clock(old_crtc_state);
+
/* this can fail */
drm_dp_check_act_status(&intel_dp->mst_mgr);
/* and this can also fail */
@@ -249,6 +251,8 @@ static void intel_mst_pre_enable_dp(struct intel_encoder *encoder,
I915_WRITE(DP_TP_STATUS(port), temp);
ret = drm_dp_update_payload_part1(&intel_dp->mst_mgr);
+
+ intel_ddi_enable_pipe_clock(pipe_config);
}
static void intel_mst_enable_dp(struct intel_encoder *encoder,
--
2.13.2
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
next reply other threads:[~2018-08-31 17:48 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-08-31 17:47 Imre Deak [this message]
2018-08-31 18:15 ` ✓ Fi.CI.BAT: success for drm/i915/dp_mst: Fix enabling pipe clock for all streams Patchwork
2018-08-31 19:12 ` [PATCH] " Ville Syrjälä
2018-08-31 19:37 ` Lyude Paul
2018-08-31 21:41 ` Rodrigo Vivi
2018-09-01 4:38 ` ✓ Fi.CI.IGT: success for " Patchwork
2018-09-01 6:20 ` Imre Deak
2018-09-04 12:08 ` [PATCH] " Jani Nikula
2018-09-04 12:54 ` Imre Deak
2018-09-04 22:53 ` Dhinakaran Pandiyan
2018-09-04 23:19 ` Rodrigo Vivi
2018-09-05 1:28 ` Dhinakaran Pandiyan
2018-09-05 10:01 ` Jani Nikula
2018-09-05 16:43 ` Rodrigo Vivi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180831174739.30387-1-imre.deak@intel.com \
--to=imre.deak@intel.com \
--cc=dmummenschanz@web.de \
--cc=intel-gfx@lists.freedesktop.org \
--cc=rodrigo.vivi@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox