From: Rodrigo Vivi <rodrigo.vivi@intel.com>
To: Imre Deak <imre.deak@intel.com>
Cc: intel-gfx@lists.freedesktop.org, dmummenschanz@web.de
Subject: Re: [PATCH] drm/i915/dp_mst: Fix enabling pipe clock for all streams
Date: Fri, 31 Aug 2018 14:41:40 -0700 [thread overview]
Message-ID: <20180831214140.GU2219@intel.com> (raw)
In-Reply-To: <20180831174739.30387-1-imre.deak@intel.com>
On Fri, Aug 31, 2018 at 08:47:39PM +0300, Imre Deak wrote:
> commit afb2c4437dae ("drm/i915/ddi: Push pipe clock enabling to encoders")
> inadvertently stopped enabling the pipe clock for any DP-MST stream
> after the first one. It also rearranged the pipe clock enabling wrt.
> initial MST payload allocation step (which may or may not be a
> problem, but it's contrary to the spec.).
>
> Fix things by making the above commit truly a non-functional change.
>
> Fixes: commit afb2c4437dae ("drm/i915/ddi: Push pipe clock enabling to encoders")
> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107365
> Reported-by: Lyude Paul <lyude@redhat.com>
> Reported-by: dmummenschanz@web.de
> Tested-by: dmummenschanz@web.de
> Cc: Lyude Paul <lyude@redhat.com>
> Cc: dmummenschanz@web.de
> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
> Cc: Chris Wilson <chris@chris-wilson.co.uk>
> Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
> ---
> drivers/gpu/drm/i915/intel_ddi.c | 17 +++++++++--------
> drivers/gpu/drm/i915/intel_dp_mst.c | 4 ++++
> 2 files changed, 13 insertions(+), 8 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/intel_ddi.c b/drivers/gpu/drm/i915/intel_ddi.c
> index f3b115ce4029..dcb1a98d624d 100644
> --- a/drivers/gpu/drm/i915/intel_ddi.c
> +++ b/drivers/gpu/drm/i915/intel_ddi.c
> @@ -2912,7 +2912,8 @@ static void intel_ddi_pre_enable_dp(struct intel_encoder *encoder,
>
> icl_enable_phy_clock_gating(dig_port);
>
> - intel_ddi_enable_pipe_clock(crtc_state);
> + if (!is_mst)
> + intel_ddi_enable_pipe_clock(crtc_state);
> }
>
> static void intel_ddi_pre_enable_hdmi(struct intel_encoder *encoder,
> @@ -3015,14 +3016,14 @@ static void intel_ddi_post_disable_dp(struct intel_encoder *encoder,
> bool is_mst = intel_crtc_has_type(old_crtc_state,
> INTEL_OUTPUT_DP_MST);
>
> - intel_ddi_disable_pipe_clock(old_crtc_state);
> -
> - /*
> - * Power down sink before disabling the port, otherwise we end
> - * up getting interrupts from the sink on detecting link loss.
> - */
> - if (!is_mst)
> + if (!is_mst) {
> + intel_ddi_disable_pipe_clock(old_crtc_state);
> + /*
> + * Power down sink before disabling the port, otherwise we end
> + * up getting interrupts from the sink on detecting link loss.
> + */
> intel_dp_sink_dpms(intel_dp, DRM_MODE_DPMS_OFF);
> + }
>
> intel_disable_ddi_buf(encoder);
>
> diff --git a/drivers/gpu/drm/i915/intel_dp_mst.c b/drivers/gpu/drm/i915/intel_dp_mst.c
> index 352e5216cc65..77920f1a3da1 100644
> --- a/drivers/gpu/drm/i915/intel_dp_mst.c
> +++ b/drivers/gpu/drm/i915/intel_dp_mst.c
> @@ -166,6 +166,8 @@ static void intel_mst_post_disable_dp(struct intel_encoder *encoder,
> struct intel_connector *connector =
> to_intel_connector(old_conn_state->connector);
>
> + intel_ddi_disable_pipe_clock(old_crtc_state);
> +
> /* this can fail */
> drm_dp_check_act_status(&intel_dp->mst_mgr);
> /* and this can also fail */
> @@ -249,6 +251,8 @@ static void intel_mst_pre_enable_dp(struct intel_encoder *encoder,
> I915_WRITE(DP_TP_STATUS(port), temp);
>
> ret = drm_dp_update_payload_part1(&intel_dp->mst_mgr);
> +
> + intel_ddi_enable_pipe_clock(pipe_config);
> }
>
> static void intel_mst_enable_dp(struct intel_encoder *encoder,
> --
> 2.13.2
>
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
next prev parent reply other threads:[~2018-08-31 21:41 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-08-31 17:47 [PATCH] drm/i915/dp_mst: Fix enabling pipe clock for all streams Imre Deak
2018-08-31 18:15 ` ✓ Fi.CI.BAT: success for " Patchwork
2018-08-31 19:12 ` [PATCH] " Ville Syrjälä
2018-08-31 19:37 ` Lyude Paul
2018-08-31 21:41 ` Rodrigo Vivi [this message]
2018-09-01 4:38 ` ✓ Fi.CI.IGT: success for " Patchwork
2018-09-01 6:20 ` Imre Deak
2018-09-04 12:08 ` [PATCH] " Jani Nikula
2018-09-04 12:54 ` Imre Deak
2018-09-04 22:53 ` Dhinakaran Pandiyan
2018-09-04 23:19 ` Rodrigo Vivi
2018-09-05 1:28 ` Dhinakaran Pandiyan
2018-09-05 10:01 ` Jani Nikula
2018-09-05 16:43 ` Rodrigo Vivi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180831214140.GU2219@intel.com \
--to=rodrigo.vivi@intel.com \
--cc=dmummenschanz@web.de \
--cc=imre.deak@intel.com \
--cc=intel-gfx@lists.freedesktop.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox