From: Ville Syrjala <ville.syrjala@linux.intel.com>
To: dri-devel@lists.freedesktop.org
Cc: intel-gfx@lists.freedesktop.org,
Hans Verkuil <hans.verkuil@cisco.com>,
linux-media@vger.kernel.org
Subject: [PATCH 06/18] video/hdmi: Handle the MPEG Source infoframe
Date: Thu, 20 Sep 2018 21:51:33 +0300 [thread overview]
Message-ID: <20180920185145.1912-7-ville.syrjala@linux.intel.com> (raw)
In-Reply-To: <20180920185145.1912-1-ville.syrjala@linux.intel.com>
From: Ville Syrjälä <ville.syrjala@linux.intel.com>
Add the code to deal with the MPEG source infoframe.
Blindly typed from the spec, and totally untested.
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Hans Verkuil <hans.verkuil@cisco.com>
Cc: linux-media@vger.kernel.org
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
---
drivers/video/hdmi.c | 229 +++++++++++++++++++++++++++++++++++++++++++++++++++
include/linux/hdmi.h | 27 ++++++
2 files changed, 256 insertions(+)
diff --git a/drivers/video/hdmi.c b/drivers/video/hdmi.c
index 9507f668a569..3d24c7746c51 100644
--- a/drivers/video/hdmi.c
+++ b/drivers/video/hdmi.c
@@ -706,6 +706,131 @@ hdmi_vendor_any_infoframe_pack(union hdmi_vendor_any_infoframe *frame,
return hdmi_vendor_any_infoframe_pack_only(frame, buffer, size);
}
+/**
+ * hdmi_mpeg_source_infoframe_init() - initialize an HDMI MPEG Source infoframe
+ * @frame: HDMI MPEG Source infoframe
+ *
+ * Returns 0 on success or a negative error code on failure.
+ */
+int hdmi_mpeg_source_infoframe_init(struct hdmi_mpeg_source_infoframe *frame)
+{
+ memset(frame, 0, sizeof(*frame));
+
+ frame->type = HDMI_INFOFRAME_TYPE_MPEG_SOURCE;
+ frame->version = 1;
+ frame->length = HDMI_MPEG_SOURCE_INFOFRAME_SIZE;
+
+ return 0;
+}
+EXPORT_SYMBOL(hdmi_mpeg_source_infoframe_init);
+
+static int hdmi_mpeg_source_infoframe_check_only(const struct hdmi_mpeg_source_infoframe *frame)
+{
+ if (frame->type != HDMI_INFOFRAME_TYPE_MPEG_SOURCE ||
+ frame->version != 1 ||
+ frame->length != HDMI_MPEG_SOURCE_INFOFRAME_SIZE)
+ return -EINVAL;
+
+ return 0;
+}
+
+/**
+ * hdmi_mpeg_source_infoframe_check() - Check and check a HDMI MPEG Source infoframe
+ * @frame: HDMI MPEG Source infoframe
+ *
+ * Validates that the infoframe is consistent and updates derived fields
+ * (eg. length) based on other fields.
+ *
+ * Returns 0 on success or a negative error code on failure.
+ */
+int hdmi_mpeg_source_infoframe_check(struct hdmi_mpeg_source_infoframe *frame)
+{
+ return hdmi_mpeg_source_infoframe_check_only(frame);
+}
+EXPORT_SYMBOL(hdmi_mpeg_source_infoframe_check);
+
+/**
+ * hdmi_mpeg_source_infoframe_pack_only() - write HDMI MPEG Source infoframe to binary buffer
+ * @frame: HDMI MPEG Source infoframe
+ * @buffer: destination buffer
+ * @size: size of buffer
+ *
+ * Packs the information contained in the @frame structure into a binary
+ * representation that can be written into the corresponding controller
+ * registers. Also computes the checksum as required by section 5.3.5 of
+ * the HDMI 1.4 specification.
+ *
+ * Returns the number of bytes packed into the binary buffer or a negative
+ * error code on failure.
+ */
+ssize_t hdmi_mpeg_source_infoframe_pack_only(const struct hdmi_mpeg_source_infoframe *frame,
+ void *buffer, size_t size)
+{
+ u8 *ptr = buffer;
+ size_t length;
+ int ret;
+
+ ret = hdmi_mpeg_source_infoframe_check_only(frame);
+ if (ret)
+ return ret;
+
+ length = HDMI_INFOFRAME_HEADER_SIZE + frame->length;
+
+ if (size < length)
+ return -ENOSPC;
+
+ memset(buffer, 0, size);
+
+ ptr[0] = frame->type;
+ ptr[1] = frame->version;
+ ptr[2] = frame->length;
+ ptr[3] = 0; /* checksum */
+
+ /* start infoframe payload */
+ ptr += HDMI_INFOFRAME_HEADER_SIZE;
+
+ ptr[0] = frame->mpeg_bit_rate >> 0;
+ ptr[1] = frame->mpeg_bit_rate >> 8;
+ ptr[2] = frame->mpeg_bit_rate >> 16;
+ ptr[3] = frame->mpeg_bit_rate >> 24;
+ ptr[4] = (frame->field_repeat << 4) | frame->mpeg_frame;
+
+ hdmi_infoframe_set_checksum(buffer, length);
+
+ return length;
+}
+EXPORT_SYMBOL(hdmi_mpeg_source_infoframe_pack_only);
+
+/**
+ * hdmi_mpeg_source_infoframe_pack() - Check and check a HDMI MPEG Source infoframe,
+ * and write it to binary buffer
+ * @frame: HDMI MPEG Source infoframe
+ * @buffer: destination buffer
+ * @size: size of buffer
+ *
+ * Validates that the infoframe is consistent and updates derived fields
+ * (eg. length) based on other fields, after which packs the information
+ * contained in the @frame structure into a binary representation that
+ * can be written into the corresponding controller registers. Also
+ * computes the checksum as required by section 5.3.5 of the HDMI 1.4
+ * specification.
+ *
+ * Returns the number of bytes packed into the binary buffer or a negative
+ * error code on failure.
+ */
+ssize_t hdmi_mpeg_source_infoframe_pack(struct hdmi_mpeg_source_infoframe *frame,
+ void *buffer, size_t size)
+{
+ int ret;
+
+ ret = hdmi_mpeg_source_infoframe_check(frame);
+ if (ret)
+ return ret;
+
+ return hdmi_mpeg_source_infoframe_pack_only(frame, buffer, size);
+}
+EXPORT_SYMBOL(hdmi_mpeg_source_infoframe_pack);
+
/**
* hdmi_infoframe_check() - Check check a HDMI infoframe
* @frame: HDMI infoframe
@@ -727,6 +852,8 @@ hdmi_infoframe_check(union hdmi_infoframe *frame)
return hdmi_audio_infoframe_check(&frame->audio);
case HDMI_INFOFRAME_TYPE_VENDOR:
return hdmi_vendor_any_infoframe_check(&frame->vendor);
+ case HDMI_INFOFRAME_TYPE_MPEG_SOURCE:
+ return hdmi_mpeg_source_infoframe_check(&frame->mpeg_source);
default:
WARN(1, "Bad infoframe type %d\n", frame->any.type);
return -EINVAL;
@@ -770,6 +897,10 @@ hdmi_infoframe_pack_only(const union hdmi_infoframe *frame, void *buffer, size_t
length = hdmi_vendor_any_infoframe_pack_only(&frame->vendor,
buffer, size);
break;
+ case HDMI_INFOFRAME_TYPE_MPEG_SOURCE:
+ length = hdmi_mpeg_source_infoframe_pack_only(&frame->mpeg_source,
+ buffer, size);
+ break;
default:
WARN(1, "Bad infoframe type %d\n", frame->any.type);
length = -EINVAL;
@@ -816,6 +947,10 @@ hdmi_infoframe_pack(union hdmi_infoframe *frame,
length = hdmi_vendor_any_infoframe_pack(&frame->vendor,
buffer, size);
break;
+ case HDMI_INFOFRAME_TYPE_MPEG_SOURCE:
+ length = hdmi_mpeg_source_infoframe_pack(&frame->mpeg_source,
+ buffer, size);
+ break;
default:
WARN(1, "Bad infoframe type %d\n", frame->any.type);
length = -EINVAL;
@@ -838,6 +973,8 @@ static const char *hdmi_infoframe_type_get_name(enum hdmi_infoframe_type type)
return "Source Product Description (SPD)";
case HDMI_INFOFRAME_TYPE_AUDIO:
return "Audio";
+ case HDMI_INFOFRAME_TYPE_MPEG_SOURCE:
+ return "MPEG Source";
}
return "Reserved";
}
@@ -1349,6 +1486,46 @@ hdmi_vendor_any_infoframe_log(const char *level,
}
}
+static const char *
+hdmi_mpeg_frame_get_name(enum hdmi_mpeg_frame frame)
+{
+ if (frame < 0 || frame > 3)
+ return "invalid";
+
+ switch (frame) {
+ case HDMI_MPEG_FRAME_UNKNOWN:
+ return "Unknown";
+ case HDMI_MPEG_FRAME_I_PICTURE:
+ return "I Picture";
+ case HDMI_MPEG_FRAME_B_PICTURE:
+ return "B Picture";
+ case HDMI_MPEG_FRAME_P_PICTURE:
+ return "P Picture";
+ }
+ return "Reserved";
+}
+
+/**
+ * hdmi_mpeg_source_infoframe_log() - log info of HDMI MPEG Source infoframe
+ * @level: logging level
+ * @dev: device
+ * @frame: HDMI MPEG Source infoframe
+ */
+static void hdmi_mpeg_source_infoframe_log(const char *level,
+ struct device *dev,
+ const struct hdmi_mpeg_source_infoframe *frame)
+{
+ hdmi_infoframe_log_header(level, dev,
+ (const struct hdmi_any_infoframe *)frame);
+
+ hdmi_log(" MPEG bit rate: %d Hz\n",
+ frame->mpeg_bit_rate);
+ hdmi_log(" MPEG frame: %s\n",
+ hdmi_mpeg_frame_get_name(frame->mpeg_frame));
+ hdmi_log(" field repeat: %s\n",
+ frame->field_repeat ? "Yes" : "No");
+}
+
/**
* hdmi_infoframe_log() - log info of HDMI infoframe
* @level: logging level
@@ -1372,6 +1549,9 @@ void hdmi_infoframe_log(const char *level,
case HDMI_INFOFRAME_TYPE_VENDOR:
hdmi_vendor_any_infoframe_log(level, dev, &frame->vendor);
break;
+ case HDMI_INFOFRAME_TYPE_MPEG_SOURCE:
+ hdmi_mpeg_source_infoframe_log(level, dev, &frame->mpeg_source);
+ break;
}
}
EXPORT_SYMBOL(hdmi_infoframe_log);
@@ -1614,6 +1794,52 @@ hdmi_vendor_any_infoframe_unpack(union hdmi_vendor_any_infoframe *frame,
return 0;
}
+/**
+ * hdmi_mpeg_source_infoframe_unpack() - unpack binary buffer to a HDMI MPEG Source infoframe
+ * @frame: HDMI MPEG Source infoframe
+ * @buffer: source buffer
+ * @size: size of buffer
+ *
+ * Unpacks the information contained in binary @buffer into a structured
+ * @frame of the HDMI MPEG Source information frame.
+ * Also verifies the checksum as required by section 5.3.5 of the HDMI 1.4
+ * specification.
+ *
+ * Returns 0 on success or a negative error code on failure.
+ */
+static int hdmi_mpeg_source_infoframe_unpack(struct hdmi_mpeg_source_infoframe *frame,
+ const void *buffer, size_t size)
+{
+ const u8 *ptr = buffer;
+ int ret;
+
+ if (size < HDMI_INFOFRAME_SIZE(MPEG_SOURCE))
+ return -EINVAL;
+
+ if (ptr[0] != HDMI_INFOFRAME_TYPE_MPEG_SOURCE ||
+ ptr[1] != 1 ||
+ ptr[2] != HDMI_MPEG_SOURCE_INFOFRAME_SIZE) {
+ return -EINVAL;
+ }
+
+ if (hdmi_infoframe_checksum(buffer, HDMI_INFOFRAME_SIZE(MPEG_SOURCE)) != 0)
+ return -EINVAL;
+
+ ret = hdmi_mpeg_source_infoframe_init(frame);
+ if (ret)
+ return ret;
+
+ ptr += HDMI_INFOFRAME_HEADER_SIZE;
+
+ frame->mpeg_bit_rate =
+ (ptr[0] << 0) | (ptr[1] << 8) |
+ (ptr[2] << 16) | (ptr[3] << 24);
+ frame->mpeg_frame = ptr[4] & 0x3;
+ frame->field_repeat = ptr[4] & 0x10;
+
+ return 0;
+}
+
/**
* hdmi_infoframe_unpack() - unpack binary buffer to a HDMI infoframe
* @frame: HDMI infoframe
@@ -1649,6 +1875,9 @@ int hdmi_infoframe_unpack(union hdmi_infoframe *frame,
case HDMI_INFOFRAME_TYPE_VENDOR:
ret = hdmi_vendor_any_infoframe_unpack(&frame->vendor, buffer, size);
break;
+ case HDMI_INFOFRAME_TYPE_MPEG_SOURCE:
+ ret = hdmi_mpeg_source_infoframe_unpack(&frame->mpeg_source, buffer, size);
+ break;
default:
ret = -EINVAL;
break;
diff --git a/include/linux/hdmi.h b/include/linux/hdmi.h
index 80521d9591a1..2c9322f7538d 100644
--- a/include/linux/hdmi.h
+++ b/include/linux/hdmi.h
@@ -47,6 +47,7 @@ enum hdmi_infoframe_type {
HDMI_INFOFRAME_TYPE_AVI = 0x82,
HDMI_INFOFRAME_TYPE_SPD = 0x83,
HDMI_INFOFRAME_TYPE_AUDIO = 0x84,
+ HDMI_INFOFRAME_TYPE_MPEG_SOURCE = 0x85,
};
#define HDMI_IEEE_OUI 0x000c03
@@ -55,6 +56,7 @@ enum hdmi_infoframe_type {
#define HDMI_AVI_INFOFRAME_SIZE 13
#define HDMI_SPD_INFOFRAME_SIZE 25
#define HDMI_AUDIO_INFOFRAME_SIZE 10
+#define HDMI_MPEG_SOURCE_INFOFRAME_SIZE 10
#define HDMI_INFOFRAME_SIZE(type) \
(HDMI_INFOFRAME_HEADER_SIZE + HDMI_ ## type ## _INFOFRAME_SIZE)
@@ -337,6 +339,29 @@ union hdmi_vendor_any_infoframe {
struct hdmi_vendor_infoframe hdmi;
};
+enum hdmi_mpeg_frame {
+ HDMI_MPEG_FRAME_UNKNOWN,
+ HDMI_MPEG_FRAME_I_PICTURE,
+ HDMI_MPEG_FRAME_B_PICTURE,
+ HDMI_MPEG_FRAME_P_PICTURE,
+};
+
+struct hdmi_mpeg_source_infoframe {
+ enum hdmi_infoframe_type type;
+ unsigned char version;
+ unsigned char length;
+ unsigned int mpeg_bit_rate;
+ enum hdmi_mpeg_frame mpeg_frame;
+ bool field_repeat;
+};
+
+int hdmi_mpeg_source_infoframe_init(struct hdmi_mpeg_source_infoframe *frame);
+ssize_t hdmi_mpeg_source_infoframe_pack(struct hdmi_mpeg_source_infoframe *frame,
+ void *buffer, size_t size);
+ssize_t hdmi_mpeg_source_infoframe_pack_only(const struct hdmi_mpeg_source_infoframe *frame,
+ void *buffer, size_t size);
+int hdmi_mpeg_source_infoframe_check(struct hdmi_mpeg_source_infoframe *frame);
+
/**
* union hdmi_infoframe - overall union of all abstract infoframe representations
* @any: generic infoframe
@@ -344,6 +369,7 @@ union hdmi_vendor_any_infoframe {
* @spd: spd infoframe
* @vendor: union of all vendor infoframes
* @audio: audio infoframe
+ * @mpeg_source: mpeg source infoframe
*
* This is used by the generic pack function. This works since all infoframes
* have the same header which also indicates which type of infoframe should be
@@ -355,6 +381,7 @@ union hdmi_infoframe {
struct hdmi_spd_infoframe spd;
union hdmi_vendor_any_infoframe vendor;
struct hdmi_audio_infoframe audio;
+ struct hdmi_mpeg_source_infoframe mpeg_source;
};
ssize_t hdmi_infoframe_pack(union hdmi_infoframe *frame, void *buffer,
--
2.16.4
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
next prev parent reply other threads:[~2018-09-20 18:51 UTC|newest]
Thread overview: 69+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-09-20 18:51 [PATCH 00/18] drm/i915: Infoframe precompute/check Ville Syrjala
2018-09-20 18:51 ` [PATCH 01/18] video/hdmi: Constify 'buffer' to the unpack functions Ville Syrjala
2018-09-21 8:03 ` Hans Verkuil
2018-09-20 18:51 ` [PATCH 02/18] video/hdmi: Pass buffer size to infoframe " Ville Syrjala
2018-09-21 8:06 ` Hans Verkuil
2018-09-20 18:51 ` [PATCH 03/18] video/hdmi: Constify infoframe passed to the log functions Ville Syrjala
2018-09-21 8:06 ` Hans Verkuil
2018-09-20 18:51 ` [PATCH 04/18] video/hdmi: Constify infoframe passed to the pack functions Ville Syrjala
2018-09-21 8:24 ` Hans Verkuil
2018-09-21 14:30 ` Ville Syrjälä
2018-09-21 14:33 ` [PATCH v3 " Ville Syrjala
2018-10-01 19:10 ` Ville Syrjälä
2018-10-02 6:37 ` Hans Verkuil
2018-09-20 18:51 ` [PATCH 05/18] video/hdmi: Add an enum for HDMI packet types Ville Syrjala
2018-09-21 8:41 ` Hans Verkuil
2018-09-21 14:01 ` Ville Syrjälä
2018-09-21 14:12 ` Hans Verkuil
2018-09-21 15:07 ` Ville Syrjälä
2018-12-20 11:27 ` Sharma, Shashank
2018-09-20 18:51 ` Ville Syrjala [this message]
2018-09-21 8:28 ` [PATCH 06/18] video/hdmi: Handle the MPEG Source infoframe Hans Verkuil
2018-09-21 13:53 ` Ville Syrjälä
2018-09-21 15:09 ` [PATCH v2 " Ville Syrjala
2018-09-20 18:51 ` [PATCH 07/18] video/hdmi: Handle the NTSC VBI infoframe Ville Syrjala
2018-09-21 8:30 ` Hans Verkuil
2018-09-21 13:54 ` Ville Syrjälä
2018-09-21 15:10 ` [PATCH v2 " Ville Syrjala
2018-09-20 18:51 ` [PATCH 08/18] drm/i915: Use memmove() for punching the hole into infoframes Ville Syrjala
2018-09-21 13:52 ` Daniel Vetter
2018-09-20 18:51 ` [PATCH 09/18] drm/i915: Pass intel_encoder to infoframe functions Ville Syrjala
2018-09-21 13:59 ` Daniel Vetter
2018-09-21 15:03 ` Ville Syrjälä
2018-09-20 18:51 ` [PATCH 10/18] drm/i915: Add the missing HDMI gamut metadata packet stuff Ville Syrjala
2018-09-21 14:15 ` [Intel-gfx] " Daniel Vetter
2018-09-20 18:51 ` [PATCH 11/18] drm/i915: Return the mask of enabled infoframes from ->inforame_enabled() Ville Syrjala
2018-09-24 15:51 ` Daniel Vetter
2018-09-24 16:36 ` [Intel-gfx] " Ville Syrjälä
2018-10-01 6:55 ` Daniel Vetter
2018-10-01 19:29 ` Ville Syrjälä
2018-09-20 18:51 ` [PATCH 12/18] drm/i915: Store mask of enabled infoframes in the crtc state Ville Syrjala
2018-09-24 15:51 ` [Intel-gfx] " Daniel Vetter
2018-09-20 18:51 ` [PATCH 13/18] drm/i915: Precompute HDMI infoframes Ville Syrjala
2018-09-24 15:58 ` Daniel Vetter
2018-09-24 16:42 ` Ville Syrjälä
2018-09-20 18:51 ` [PATCH 14/18] drm/i915: Read out " Ville Syrjala
2018-09-24 16:08 ` Daniel Vetter
2018-09-24 16:52 ` Ville Syrjälä
2018-09-20 18:51 ` [PATCH 15/18] drm/i915/sdvo: Precompute " Ville Syrjala
2018-09-20 18:51 ` [PATCH 16/18] drm/i915/sdvo: Read out " Ville Syrjala
2018-09-24 16:10 ` [Intel-gfx] " Daniel Vetter
2018-09-24 17:13 ` Ville Syrjälä
2018-10-01 6:59 ` Daniel Vetter
2018-10-01 13:35 ` Ville Syrjälä
2018-10-01 16:48 ` Daniel Vetter
2018-09-20 18:51 ` [PATCH 17/18] drm/i915: Check infoframe state in intel_pipe_config_compare() Ville Syrjala
2018-09-24 16:12 ` Daniel Vetter
2018-10-01 20:35 ` [Intel-gfx] " Ville Syrjälä
2018-10-02 8:16 ` Daniel Vetter
2018-09-20 18:51 ` [PATCH 18/18] drm/i915: Include infoframes in the crtc state dump Ville Syrjala
2018-09-24 16:14 ` [Intel-gfx] " Daniel Vetter
2018-09-20 19:02 ` ✗ Fi.CI.CHECKPATCH: warning for drm/i915: Infoframe precompute/check Patchwork
2018-09-20 19:12 ` ✗ Fi.CI.SPARSE: " Patchwork
2018-09-20 19:26 ` ✓ Fi.CI.BAT: success " Patchwork
2018-09-20 22:30 ` ✓ Fi.CI.IGT: " Patchwork
2018-09-21 14:40 ` ✗ Fi.CI.BAT: failure for drm/i915: Infoframe precompute/check (rev2) Patchwork
2018-09-21 15:25 ` ✗ Fi.CI.CHECKPATCH: warning for drm/i915: Infoframe precompute/check (rev4) Patchwork
2018-09-21 15:35 ` ✗ Fi.CI.SPARSE: " Patchwork
2018-09-21 15:46 ` ✓ Fi.CI.BAT: success " Patchwork
2018-09-21 17:04 ` ✓ Fi.CI.IGT: " Patchwork
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180920185145.1912-7-ville.syrjala@linux.intel.com \
--to=ville.syrjala@linux.intel.com \
--cc=dri-devel@lists.freedesktop.org \
--cc=hans.verkuil@cisco.com \
--cc=intel-gfx@lists.freedesktop.org \
--cc=linux-media@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox