From: Manasi Navare <manasi.d.navare@intel.com>
To: Anusha Srivatsa <anusha.srivatsa@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>, intel-gfx@lists.freedesktop.org
Subject: Re: [PATCH] drm/i915/icl: Fix DSS_CTL register names
Date: Thu, 1 Nov 2018 14:28:58 -0700 [thread overview]
Message-ID: <20181101212858.GA27805@intel.com> (raw)
In-Reply-To: <20181101210643.7727-1-anusha.srivatsa@intel.com>
On Thu, Nov 01, 2018 at 02:06:43PM -0700, Anusha Srivatsa wrote:
> This patch fixes the naming of the registers:
>
> s/PIPE_DSS_CTL/ICL_PIPE_DSS_CTL
>
> And also fix the hex values to lower case, to match
> rest of the definitions.
>
> Manasi noticed this with the patch that was merged.
>
> Fixes - 8b1b558d690aa (drm/i915/icl: Add DSS_CTL Registers)
This is not the way Fixes tag is used, not sure if the scripts will pick this.
The right way is:
Fixes: commit SHA 1st 12 letters ("commit title")
Eg:
Fixes: 57692c94dcbe ("drm/v3d: Introduce a new DRM driver for Broadcom V3D V3.x+")
Manasi
> Suggested-by: Manasi Navare <manasi.d.navare@intel.com>
> Cc: Jani Nikula <jani.nikula@intel.com>
> Cc: Manasi Navare <manasi.d.navare@intel.com>
> Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
> ---
> drivers/gpu/drm/i915/i915_reg.h | 22 +++++++++++-----------
> 1 file changed, 11 insertions(+), 11 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
> index aef1a30ff9f6..c0e6e14fe9fa 100644
> --- a/drivers/gpu/drm/i915/i915_reg.h
> +++ b/drivers/gpu/drm/i915/i915_reg.h
> @@ -10050,7 +10050,7 @@ enum skl_power_gate {
> #define OVERLAP_PIXELS(pixels) ((pixels) << 16)
> #define LEFT_DL_BUF_TARGET_DEPTH_MASK (0xfff << 0)
> #define LEFT_DL_BUF_TARGET_DEPTH(pixels) ((pixels) << 0)
> -#define MAX_DL_BUFFER_TARGET_DEPTH 0x5A0
> +#define MAX_DL_BUFFER_TARGET_DEPTH 0x5a0
>
> #define DSS_CTL2 _MMIO(0x67404)
> #define LEFT_BRANCH_VDSC_ENABLE (1 << 31)
> @@ -10058,20 +10058,20 @@ enum skl_power_gate {
> #define RIGHT_DL_BUF_TARGET_DEPTH_MASK (0xfff << 0)
> #define RIGHT_DL_BUF_TARGET_DEPTH(pixels) ((pixels) << 0)
>
> -#define _PIPE_DSS_CTL1_PB 0x78200
> -#define _PIPE_DSS_CTL1_PC 0x78400
> -#define PIPE_DSS_CTL1(pipe) _MMIO_PIPE((pipe) - PIPE_B, \
> - _PIPE_DSS_CTL1_PB, \
> - _PIPE_DSS_CTL1_PC)
> +#define _ICL_PIPE_DSS_CTL1_PB 0x78200
> +#define _ICL_PIPE_DSS_CTL1_PC 0x78400
> +#define ICL_PIPE_DSS_CTL1(pipe) _MMIO_PIPE((pipe) - PIPE_B, \
> + _ICL_PIPE_DSS_CTL1_PB, \
> + _ICL_PIPE_DSS_CTL1_PC)
> #define BIG_JOINER_ENABLE (1 << 29)
> #define MASTER_BIG_JOINER_ENABLE (1 << 28)
> #define VGA_CENTERING_ENABLE (1 << 27)
>
> -#define _PIPE_DSS_CTL2_PB 0x78204
> -#define _PIPE_DSS_CTL2_PC 0x78404
> -#define PIPE_DSS_CTL2(pipe) _MMIO_PIPE((pipe) - PIPE_B, \
> - _PIPE_DSS_CTL2_PB, \
> - _PIPE_DSS_CTL2_PC)
> +#define _ICL_PIPE_DSS_CTL2_PB 0x78204
> +#define _ICL_PIPE_DSS_CTL2_PC 0x78404
> +#define ICL_PIPE_DSS_CTL2(pipe) _MMIO_PIPE((pipe) - PIPE_B, \
> + _ICL_PIPE_DSS_CTL2_PB, \
> + _ICL_PIPE_DSS_CTL2_PC)
>
> #define BXT_P_DSI_REGULATOR_CFG _MMIO(0x160020)
> #define STAP_SELECT (1 << 0)
> --
> 2.17.1
>
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
next prev parent reply other threads:[~2018-11-01 21:26 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-11-01 21:06 [PATCH] drm/i915/icl: Fix DSS_CTL register names Anusha Srivatsa
2018-11-01 21:26 ` ✗ Fi.CI.CHECKPATCH: warning for " Patchwork
2018-11-01 21:28 ` Manasi Navare [this message]
2018-11-02 7:33 ` [PATCH] " Jani Nikula
2018-11-01 21:50 ` ✓ Fi.CI.BAT: success for " Patchwork
-- strict thread matches above, loose matches on Subject: below --
2018-11-01 21:42 [PATCH] " Anusha Srivatsa
2018-11-01 21:55 ` Manasi Navare
2018-11-02 5:08 ` Manasi Navare
2018-11-02 7:14 ` Jani Nikula
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20181101212858.GA27805@intel.com \
--to=manasi.d.navare@intel.com \
--cc=anusha.srivatsa@intel.com \
--cc=intel-gfx@lists.freedesktop.org \
--cc=jani.nikula@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox