From: Imre Deak <imre.deak@intel.com>
To: "Ville Syrjälä" <ville.syrjala@linux.intel.com>
Cc: intel-gfx@lists.freedesktop.org,
Paulo Zanoni <paulo.r.zanoni@intel.com>,
Rodrigo Vivi <rodrigo.vivi@intel.com>
Subject: Re: [PATCH v2 2/5] drm/i915/cnl+: Move the combo PHY init/uninit code to a new file
Date: Tue, 6 Nov 2018 19:00:24 +0200 [thread overview]
Message-ID: <20181106170024.GD2878@ideak-desk.fi.intel.com> (raw)
In-Reply-To: <20181106161625.GA9144@intel.com>
On Tue, Nov 06, 2018 at 06:16:25PM +0200, Ville Syrjälä wrote:
> On Tue, Nov 06, 2018 at 06:06:18PM +0200, Imre Deak wrote:
> > Similarly to the GEN9_LP DPIO PHY code keep the CNL+ combo PHY code in a
> > separate file.
> >
> > No functional change.
> >
> > v2:
> > - Use SPDX license tag instead of boilerplate. (Rodrigo)
> >
> > Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
> > Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
> > Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
> > Cc: José Roberto de Souza <jose.souza@intel.com>
> > Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
> > Signed-off-by: Imre Deak <imre.deak@intel.com>
> > Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
> > ---
> > drivers/gpu/drm/i915/Makefile | 1 +
> > drivers/gpu/drm/i915/i915_drv.h | 6 ++
> > drivers/gpu/drm/i915/intel_combo_phy.c | 141 ++++++++++++++++++++++++++++++++
> > drivers/gpu/drm/i915/intel_runtime_pm.c | 127 ++--------------------------
> > 4 files changed, 156 insertions(+), 119 deletions(-)
> > create mode 100644 drivers/gpu/drm/i915/intel_combo_phy.c
> >
> > diff --git a/drivers/gpu/drm/i915/Makefile b/drivers/gpu/drm/i915/Makefile
> > index 6fbda5977658..0ff878c994e2 100644
> > --- a/drivers/gpu/drm/i915/Makefile
> > +++ b/drivers/gpu/drm/i915/Makefile
> > @@ -113,6 +113,7 @@ i915-y += intel_audio.o \
> > intel_bios.o \
> > intel_cdclk.o \
> > intel_color.o \
> > + intel_combo_phy.o \
> > intel_connector.o \
> > intel_display.o \
> > intel_dpio_phy.o \
> > diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
> > index 2a88a7eb871b..ef47cae13573 100644
> > --- a/drivers/gpu/drm/i915/i915_drv.h
> > +++ b/drivers/gpu/drm/i915/i915_drv.h
> > @@ -3571,6 +3571,12 @@ void vlv_phy_pre_encoder_enable(struct intel_encoder *encoder,
> > void vlv_phy_reset_lanes(struct intel_encoder *encoder,
> > const struct intel_crtc_state *old_crtc_state);
> >
> > +/* intel_combo_phy.c */
> > +void icl_combo_phys_init(struct drm_i915_private *dev_priv);
> > +void icl_combo_phys_uninit(struct drm_i915_private *dev_priv);
> > +void cnl_combo_phys_init(struct drm_i915_private *dev_priv);
> > +void cnl_combo_phys_uninit(struct drm_i915_private *dev_priv);
> > +
> > int intel_gpu_freq(struct drm_i915_private *dev_priv, int val);
> > int intel_freq_opcode(struct drm_i915_private *dev_priv, int val);
> > u64 intel_rc6_residency_ns(struct drm_i915_private *dev_priv,
> > diff --git a/drivers/gpu/drm/i915/intel_combo_phy.c b/drivers/gpu/drm/i915/intel_combo_phy.c
> > new file mode 100644
> > index 000000000000..8dd0a3c68f01
> > --- /dev/null
> > +++ b/drivers/gpu/drm/i915/intel_combo_phy.c
> > @@ -0,0 +1,141 @@
> > +// SPDX-License-Identifier: GPL-2.0
>
> MIT
Err, will change that. So as you explained the driver in general is MIT
licensed, and also the license text boilerplate I replaced is the MIT one.
>
> > +/*
> > + * Copyright © 2018 Intel Corporation
> > + */
> > +
>
> --
> Ville Syrjälä
> Intel
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
next prev parent reply other threads:[~2018-11-06 17:00 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-11-06 16:06 [PATCH v2 0/5] drm/i915/icl: Fix combo PHY HW context loss Imre Deak
2018-11-06 16:06 ` [PATCH v2 1/5] drm/i915/icl: Fix combo PHY uninit Imre Deak
2018-11-07 20:37 ` Souza, Jose
2018-11-06 16:06 ` [PATCH v2 2/5] drm/i915/cnl+: Move the combo PHY init/uninit code to a new file Imre Deak
2018-11-06 16:16 ` Ville Syrjälä
2018-11-06 17:00 ` Imre Deak [this message]
2018-11-07 20:41 ` Souza, Jose
2018-11-06 16:06 ` [PATCH v2 3/5] drm/i915/cnl+: Verify combo PHY HW state during PHY uninit Imre Deak
2018-11-07 20:46 ` Souza, Jose
2018-11-06 16:06 ` [PATCH v2 4/5] drm/i915/icl: Skip init for an already enabled combo PHY Imre Deak
2018-11-06 16:06 ` [PATCH v2 5/5] drm/i915/icl: Fix port B combo PHY context loss after DC transitions Imre Deak
2018-11-07 20:46 ` Souza, Jose
2018-11-07 11:05 ` ✗ Fi.CI.CHECKPATCH: warning for drm/i915/icl: Fix combo PHY HW context loss (rev2) Patchwork
2018-11-07 11:07 ` ✗ Fi.CI.SPARSE: " Patchwork
2018-11-07 11:31 ` ✗ Fi.CI.BAT: failure " Patchwork
2018-11-07 11:37 ` Patchwork
2018-11-07 11:40 ` ✓ Fi.CI.BAT: success " Patchwork
2018-11-07 11:44 ` Patchwork
2018-11-08 17:34 ` Imre Deak
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20181106170024.GD2878@ideak-desk.fi.intel.com \
--to=imre.deak@intel.com \
--cc=intel-gfx@lists.freedesktop.org \
--cc=paulo.r.zanoni@intel.com \
--cc=rodrigo.vivi@intel.com \
--cc=ville.syrjala@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox